Outdoor performance of forest seedlings pre-cultivated under artificial lights : effects of the light spectra used for pre-cultivation on the future establishment and development

Forest nurseries are essential for producing good quality seedlings, thus being a key element in the reforestation process. With increasing climate change awareness, nursery managers are looking for new tools that can help reduce the effects of their operations on the environment. The ZEPHYR project, funded by the European Commission under the Seventh Framework Programme (FP7), has the objective of finding new alternatives for nurseries by developing innovative zero-impact technologies for forest plant production. Due to their direct relationship to the energy consumption of the nurseries, one of the main elements addressed are the grow lights used for the pre-cultivation. New LED luminaires with a light spectrum tailored to the seedlings’ needs are being studied and compared against the traditional fluorescent lamps. Seedlings of Picea abies and Pinus sylvestris were grown under five different light spectra (one fluorescent and 4 LED) during 5 weeks with a photoperiod of 16 hours at 100 μmol∙m-2∙s-1 and 60% humidity. In order to evaluate if these seedlings were able cope with real field stress conditions, a forest field trial was also designed. The terrain chosen was a typical planting site in mid-Sweden after clear-cutting. Two vegetation periods after the outplanting, the seedlings that were pre-cultivated under the LED lamps have performed at least as well as those that were grown under fluorescent lights. These results show that there is a good  potential for lightning substitution in forestry nurseries.

Design and application of experimental methods for steel sheet shearing

Shearing is the process where sheet metal is mechanically cut between two tools. Various shearing technologies are commonly used in the sheet metal industry, for example, in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material. The constant development of sheet metals toward higher strength and formability leads to increased forces on the shearing equipment and tools. Shearing of new sheet materials imply new suitable shearing parameters. Investigations of the shearing parameters through live tests in the production are expensive and separate experiments are time consuming and requires specialized equipment. Studies involving a large number of parameters and coupled effects are therefore preferably performed by finite element based simulations. Accurate experimental data is still a prerequisite to validate such simulations. There is, however, a shortage of accurate experimental data to validate such simulations. In industrial shearing processes, measured forces are always larger than the actual forces acting on the sheet, due to friction losses. Shearing also generates a force that attempts to separate the two tools with changed shearing conditions through increased clearance between the tools as result. Tool clearance is also the most common shearing parameter to adjust, depending on material grade and sheet thickness, to moderate the required force and to control the final sheared edge geometry. In this work, an experimental procedure that provides a stable tool clearance together with accurate measurements of tool forces and tool displacements, was designed, built and evaluated. Important shearing parameters and demands on the experimental set-up were identified in a sensitivity analysis performed with finite element simulations under the assumption of plane strain. With respect to large tool clearance stability and accurate force measurements, a symmetric experiment with two simultaneous shears and internal balancing of forces attempting to separate the tools was constructed. Steel sheets of different strength levels were sheared using the above mentioned experimental set-up, with various tool clearances, sheet clamping and rake angles. Results showed that tool penetration before fracture decreased with increased material strength. When one side of the sheet was left unclamped and free to move, the required shearing force decreased but instead the force attempting to separate the two tools increased. Further, the maximum shearing force decreased and the rollover increased with increased tool clearance. Digital image correlation was applied to measure strains on the sheet surface. The obtained strain fields, together with a material model, were used to compute the stress state in the sheet. A comparison, up to crack initiation, of these experimental results with corresponding results from finite element simulations in three dimensions and at a plane strain approximation showed that effective strains on the surface are representative also for the bulk material. A simple model was successfully applied to calculate the tool forces in shearing with angled tools from forces measured with parallel tools. These results suggest that, with respect to tool forces, a plane strain approximation is valid also at angled tools, at least for small rake angles. In general terms, this study provide a stable symmetric experimental set-up with internal balancing of lateral forces, for accurate measurements of tool forces, tool displacements, and sheet deformations, to study the effects of important shearing parameters. The results give further insight to the strain and stress conditions at crack initiation during shearing, and can also be used to validate models of the shearing process.

Kreativitet under stress : En studie i att vara kreativ på beställning

En grafisk designer måste kunna producera oavsett vilka förhållanden som råder. Rapporten behandlar vad korta och långa deadlines har för inverkan på denna förmåga och hur kreativiteten kan främjas vid stressiga situationer. Semistrukturerade djupintervjuer utfördes med åtta Art- och Creative directors i Gävledala-regionen för att undersöka hur de upplevde att vara kreativa under stressiga förhållanden. Resultatet visade att det generellt inte var ett problem för studiens respondenter att vara kreativa på beställning men att de inte heller följde några specifika metoder för att underlätta arbetsflödet. Det visade sig även att det snarare var arbetsbördan och mängden arbetsuppgifter som påverkade stressfaktorn än en specifik tidsram.

Mellanchefers upplevelser av psykosocial arbetsmiljö inom distributions- och logistikverksamhet – en pendling mellan hög aktivitet och låg stress?

Forskarnas genuina intresse för den psykosociala arbetsmiljön med koppling mellanchefer gav upphov till att dyka djupare inom området och belysa centrala delar i form av krav, kontroll och socialt stöd. Framåtskridandet går mot en ökad medvetenhet kring den psykosociala arbetsmiljön, då ohälsan i arbetslivet ökar och Arbetsmiljöverkets nya föreskrift om organisatorisk och social arbetsmiljö är i fokus. I linje med en ökad medvetenhet som sker kring den psykosociala arbetsmiljön vill vi rikta ett särskilt fokus till mellanchefer som bör ha en förmåga att hantera krav både uppifrån och ned. Studien har främst utgått från Robert Karaseks och Töres Theorells Krav – kontroll – stödmodellen. Syftet är att undersöka mellanchefers upplevelse med fokus på den psykosociala arbetsmiljön i ett privat företag inom distributions- och logistikverksamhet. Metoden har bestått av en kvalitativ metod i form av en fallstudie där semistrukturerade intervjuer ligger som grund med åtta respondenter ifrån distributionscentret. Resultatet uppvisar att mellancheferna har en hög grad av inflytande, upplevelsen av arbetskrav varierar men i koppling till befattningen är kraven rimliga. Det sociala stödet upplevs som bra på arbetsplatsen och anses av funktionscheferna som en viktig och central del i arbetet. Slutsatser som har uppnåtts är att funktionscheferna har rimliga krav och upplever en bra nivå av kontroll i arbetet, men att ha en alltför hög kontroll i arbetet kan leda till negativ stress. En balans i pendlingen mellan aktiva arbeten och lågstressarbeten anses vara en fördel för att bevara en god psykosocial arbetsmiljö. Detta för att motverka de negativa effekterna som kan uppstå av att befinna sig inom varje komponent för länge. I studien har det påvisats att företaget anses ha en god psykosocial arbetsmiljö och därmed kan ses som ett gott exempel i arbetslivet.

Influence of grinding operations on surface integrity and chloride induced stress corrosion cracking of stainless steels

Stainless steels were developed in the early 20th century and are used where both the mechanical properties of steels and corrosion resistance are required. There is continuous research to allow stainless steel components to be produced in a more economical way and be used in more harsh environments. A necessary component in this effort is to correlate the service performance with the production processes. The central theme of this thesis is the mechanical grinding process.  This is commonly used for producing stainless steel components, and results in varied surface properties that will strongly affect their service life. The influence of grinding parameters including abrasive grit size, machine power and grinding lubricant were studied for 304L austenitic stainless steel (Paper II) and 2304 duplex stainless steel (Paper I). Surface integrity was proved to vary significantly with different grinding parameters. Abrasive grit size was found to have the largest influence. Surface defects (deep grooves, smearing, adhesive/cold welding chips and indentations), a highly deformed surface layer up to a few microns in thickness and the generation of high level tensile residual stresses in the surface layer along the grinding direction were observed as the main types of damage when grinding stainless steels. A large degree of residual stress anisotropy is interpreted as being due to mechanical effects dominating over thermal effects. The effect of grinding on stress corrosion cracking behaviour of 304L austenitic stainless steel in a chloride environment was also investigated (Paper III). Depending on the surface conditions, the actual loading by four-point bend was found to deviate from the calculated value using the formula according to ASTM G39 by different amounts. Grinding-induced surface tensile residual stress was suggested as the main factor to cause micro-cracks initiation on the ground surfaces. Grinding along the loading direction was proved to increase the susceptibility to chloride-induced SCC, while grinding perpendicular to the loading direction improved SCC resistance. The knowledge obtained from this work can provide a reference for choosing appropriate grinding parameters when fabricating stainless steel components; and can also be used to help understanding the failure mechanism of ground stainless steel components during service.