Attityd till att fullfölja nuvarande studier - En applikation av The Theory of Planned Behavior

För att förutsäga och förklara människors beteenden och intentioner har ”attityd” länge varit ett centralt begrepp inom socialpsykologin. En vanlig teori och modell för ändamålet är ”theory of planned behavior” (TpB), vilken säger att en individs beteende styrs av dess intention, som i sin tur är en funktion av den personliga attityden, det sociala trycket och den upplevda kontrollen att kunna genomföra aktuellt beteende. Syftet med föreliggande studie var att undersöka attityden och intentionen till att fullfölja nuvarande studier och göra en applikation av TpB-modellen via en Internetenkät riktad till studenter på Högskolan Dalarna (N = 1292). Hypotesen att ”den upplevda kontrollen” är den viktigaste direkta variabeln för intentionen kunde godtas, vilket kan antagas bero på beteendets karaktär. Diskussion förs också kring intentionens eventuella omvandling till verkligt beteende.

Sociala faktorers inverkan på elevers intentioner till högre studier : En applikation av Theory of planned behavior

Denna studie grundar sig på en enkätundersökning av 59 gymnasieungdomars intentioner till att inom de närmaste 5 åren påbörja studier vid högskola eller universitet. Undersökningen är baserad på Theory of planned behavior och syftar till att testa teorins pålitlighet i att besvara vilken av de socialt betingade bakgrundsfaktorerna attityd, subjektiv norm och upplevd beteendekontroll som utgör den bästa prediktorn för undersökningsdeltagarnas intentioner. Därtill undersöks dessa faktorers samband med föräldrarnas utbildningsnivå. Theory of planned behavior visade sig vara ett reliabelt mätinstrument gällande studiens övriga frågor, där den upplevda beteendekontrollen och den subjektiva normen utgjorde signifikanta prediktorer gällande undersökningsdeltagarnas intentioner. Därtill påvisades samband mellan föräldrars utbildningsnivå och deltagarnas intentioner samt subjektiva norm. Författaren menar att studier likt denna ger ett värdefullt bidrag till det viktiga arbetet med att förverkliga den svenska skolans likvärdighetsmål.

Evaluation of communication behavior in persons with dementia during caregivers’ singing

The number of persons with dementia (PWD) is increasing rapidly worldwide. Cognitive impairments and communication difficulties are common among PWD. Therefore, gaining mutual togetherness in caring relation between PWD and their caregivers is important. This study was to investigate the effects of music therapeutic care (MTC) during morning care situations on improving verbal and nonverbal communication behaviors in people with dementia. An observation study with 10 PWD participating. Videotaped interactions (VIO) between PWD and their caregivers were conducted during eight weekly sessions, four recordings consisted of usual morning care and four recordings were of morning care with MTC intervention. The Verbal and Nonverbal Interaction Scale was used to analyze the recorded interactions at a later time. The unsociable verbal variable Cursing decreased significantly (P=.037) during MTC when compared with the baseline measurement. A significant (P=.000) reduction was observed for the unsociable nonverbal variable Does not respond to question. MTC significantly (P=.01) increased the mean score for the sociable nonverbal variable – Calm – relaxed. For sociable verbal communication, significant differences were observed for the variables Use coherent communication (P=.012), Use relevant communication (P=.009), Responds to questions (P=.000), Humming (P=.004), Singing (P=.000). MTC during morning care situations can be an effective non-pharmacological treatment, as well as nursing intervention in order to improve sociable communication behaviors, as well as reduce unsociable communication behaviors of PWDs

Finite element modeling of straightening of thin-walled seamless tubes of austenitic stainless steel

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Finite element analysis of hot rolling in the blooming mill

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

The Choice of STIGA Table Tennis Blades : Evidence from China

The purpose of this paper is to investigate how individuals with different characteristics make their choice-decisions when consuming STIGA table tennis blades, which are combinations of various attributes, such as price, control, attack, etc. It is expected that the general trend of choice behavior on this special commodity can be, at least to some extent, revealed. Data were collected using questionnaires sent to registered members of a table tennis club in China. The questionnaires included information and questions about individuals’ monthly income levels, ages, technique styles, etc. A multinomial logit model was then applied to analyze factors determining Chinese consumers’ choice behavior on STIGA table tennis blades. The results indicated that the main element influencing Chinese consumers’ choice of STIGA ping-pong blades was the technique style and other variables did not seem to influence the choice of table tennis blades. These results might be explained by the limited sample size as well as unmeasured and immeasurable factors. Thus, a more extensive research is needed to be conducted in the future.