Task assignment optimization in SAP Extended WarehouseManagement

Nowadays in the world of mass consumption there is big demand for distributioncenters of bigger size. Managing such a center is a very complex and difficult taskregarding to the different processes and factors in a usual warehouse when we want tominimize the labor costs. Most of the workers’ working time is spent with travelingbetween source and destination points which cause deadheading. Even if a worker knowsthe structure of a warehouse well and because of that he or she can find the shortest pathbetween two points, it is still not guaranteed that there won’t be long traveling timebetween the locations of two consecutive tasks. We need optimal assignments betweentasks and workers.In the scientific literature Generalized Assignment Problem (GAP) is a wellknownproblem which deals with the assignment of m workers to n tasks consideringseveral constraints. The primary purpose of my thesis project was to choose a heuristics(genetic algorithm, tabu search or ant colony optimization) to be implemented into SAPExtended Warehouse Management (SAP EWM) by with task assignment will be moreeffective between tasks and resources.After system analysis I had to realize that due different constraints and businessdemands only 1:1 assingments are allowed in SAP EWM. Because of that I had to use adifferent and simpler approach – instead of the introduced heuristics – which could gainbetter assignments during the test phase in several cases. In the thesis I described indetails what ware the most important questions and problems which emerged during theplanning of my optimized assignment method.

Gränsdragning mellan arbete & fritid : Närvaro i sin frånvaro

Vårt syfte med denna studie är att ämna beskriva vilken betydelse det gränslösa arbetet får för chefsrollen, utifrån de förändringar som sker i dagens arbetsliv samt hur gränsdragningen mellan arbete och fritid hanteras. Vi valde att utföra vår studie i form av kvalitativa intervjuer, där vi intervjuade sex medarbetare inom en offentlig organisation i Dalarna, Sverige. Det resultat vi erhöll analyserades utifrån tidigare forskning och teorier. Resultaten i vår studie visar att cheferna direkt eller indirekt påverkas av förändringar som sker i arbetslivet och att det även är något som påverkar hur cheferna hanterar gränsdragningen mellan arbete och fritid. Studiens resultat visar vidare att cheferna menar att dessa förändringar bidrar till att förändra deras sätt att agera i chefsrollen och att det ställer andra krav på deras kompetenser. Resultatet visar också att kraven i arbetet måste vara rimliga, för att skapa balans mellan arbets- och privatliv och att det i första hand inte är de kvantitativa faktorerna i förhållande till arbetet som skapar en upplevelse av gränslöshet. Med kvantitativa faktorer menar vi de faktorer som traditionellt beskrivs som mer konkreta faktorer i arbetet, exempelvis arbetets utformning, arbetstiden, tillgängligheten eller antalet arbetsuppgifter att utföra. Istället belyser resultatet att en emotionell känsla av stress kan uppstå i relation till den egna upplevelsen av en känslig situation i arbetet eller när den egna kompetensen inte räcker till i arbetsutförandet och att det kan skapa en otydlig gräns mellan arbetstid och fritid.

Managing ServerHotel

This graduate study was assigned by Unisys Oy Ab. The purpose of this study was to find tools to monitor and manage servers and objects in a hosting environment and to remotely connect to the managed objects. Better solutions for promised services were also researched. Unisys provides a ServerHotel service to other businesses which do not have time or resources to manage their own network, servers or applications. Contracts are based on a Service Level Agreement where service level is agreed upon according to the customer's needs. These needs have created a demand for management tools. Unisys wanted to find the most appropriate tools for its hosting environment to fulfill the agreed service level with reasonable costs. The theory consists of literary research focusing on general agreements used in the Finnish IT business, different types of monitoring and management tools and the common protocols used inthem. The theory focuses mainly on the central elements of the above mentioned topics and on their positive and negative features. The second part of the study focuses on general hosting agreements and what management tools Unisys has selected for hosting and why. It also gives a more detailed account of the hosting environment and its features in more detail. Because of the results of the study Unisys decided to use Servers Alive to monitor network and MS applications’ services. Cacti was chosen to monitor disk spaces, which gives us an idea of future disk growth. For remote connections the Microsoft’s Remote Desktop tool was the mostappropriate when the connection was tunneled through Secure Shell (SSH). Finding proper tools for the intended purposes with cost-conscious financial resources proved challenging. This study showed that if required, it is possible to build a professional hosting environment.

An Upgrade of Network Traffic Recognition System for SIP/VoIP Traffic Recognition

The purpose of this project is to update the tool of Network Traffic Recognition System (NTRS) which is proprietary software of Ericsson AB and Tsinghua University, and to implement the updated tool to finish SIP/VoIP traffic recognition. Basing on the original NTRS, I analyze the traffic recognition principal of NTRS, and redesign the structure and module of the tool according to characteristics of SIP/VoIP traffic, and then finally I program to achieve the upgrade. After the final test with our SIP data trace files in the updated system, a satisfactory result is derived. The result presents that our updated system holds a rate of recognition on a confident level in the SIP session recognition as well as the VoIP call recognition. In the comparison with the software of Wireshark, our updated system has a result which is extremely close to Wireshark’s output, and the working time is much less than Wireshark. In the aspect of practicability, the memory overflow problem is avoided, and the updated system can output the specific information of SIP/VoIP traffic recognition, such as SIP type, SIP state, VoIP state, etc. The upgrade fulfills the demand of this project.

Besökshundens påverkan på arbetssituationen inom den särskilda omsorgen

This essay is about dogs that visit is used, whitin care of elderly. The dogs found caretakers once a week and one hour at a time. The focus has been placed on the dogs that go to the municipality's special accommodation and the research was done in a medium-sized municipality in Sweden. The focus of the narrowing of the work was done to the work situation for care staff to assess the impact of the visits the dogs presence. It was distributed questionnaires answered by care staff in which it concluded their visit to the dog's presence felt and how it impacted the situation. There has been much previous research done on how dogs affect the elderly in care. This has been done to see if the care staff perceive the same thing, and in turn experience any possible help of visiting dogs. What emerged in this study is that most are in favor of visits dog and they're older. The majority of respondents agreed that their work situation has become neither better nor worse then visit the dogs started to meet caretakers. This may be due to visit the dog is not enough time on site at each visit. Even the fact that care staff are not practicing with the caretakers memory to get them to remain in the state of mind that research shows that the older gets in. These can have an impact on how care staff perceive a possible means in visits of the dog.

Identifiering av parametrar till ackumulatortanken Solus1050 från consolar - en metodbeskrivning

This report describes the work done creating a computer model of a kombi tank from Consolar. The model was created with Presim/Trnsys and Fittrn and DF were used to identify the parameters. Measurements were carried out and were used to identify the values of the parameters in the model. The identifications were first done for every circuit separately. After that, all parameters are normally identified together using all the measurements. Finally the model should be compared with other measurements, preferable realistic ones. The two last steps have not yet been carried out, because of problems finding a good model for the domestic hot water circuit.The model of the domestic hot water circuit give relatively good results for low flows at 5 l/min, but is not good for higher flows. In the report suggestions for improving the model are given. However, there was not enough time to test this within the project as much time was spent trying to solve problems with the model crashing. Suggestions for improving the model for the domestic circuit are given in chapter 4.4. The improved equations that are to be used in the improved model are given by equation 4.18, 4.19 and 4.22.Also for the boiler circuit and the solar circuit there are improvements that can be done. The model presented here has a few shortcomings, but with some extra work, an improved model can be created. In the attachment (Bilaga 1) is a description of the used model and all the identified parameters.A qualitative assessment of the store was also performed based on the measurements and the modelling carried out. The following summary of this can be given: Hot Water PreparationThe principle for controlling the flow on the primary side seems to work well in order to achieve good stratification. Temperatures in the bottom of the store after a short use of hot water, at a coldwater temperature of 12°C, was around 28-30°C. This was almost independent of the temperature in the store and the DHW-flow.The measured UA-values of the heat exchangers are not very reliable, but indicates that the heat transfer rates are much better than for the Conus 500, and in the same range as for other stores tested at SERC.The function of the mixing valve is not perfect (see diagram 4.3, where Tout1 is the outlet hot water temperature, and Tdhwo and Tdhw1 is the inlet temperature to the hot and cold side of the valve respectively). The outlet temperature varies a lot with different temperatures in the storage and is going down from 61°C to 47°C before the cold port is fully closed. This gives a problem to find a suitable temperature setting and gives also a risk that the auxiliary heating is increased instead of the set temperature of the valve, when the hot water temperature is to low.Collector circuitThe UA-value of the collector heat exchanger is much higher than the value for Conus 500, and in the same range as the heat exchangers in other stores tested at SERC.Boiler circuitThe valve in the boiler circuit is used to supply water from the boiler at two different heights, depending on the temperature of the water. At temperatures from the boiler above 58.2°C, all the water is injected to the upper inlet. At temperatures below 53.9°C all the water is injected to the lower inlet. At 56°C the water flow is equally divided between the two inlets. Detailed studies of the behaviour at the upper inlet shows that better accuracy of the model would have been achieved using three double ports in the model instead of two. The shape of the upper inlet makes turbulence, that could be modelled using two different inlets. Heat lossesThe heat losses per m3 are much smaller for the Solus 1050, than for the Conus 500 Storage. However, they are higher than those for some good stores tested at SERC. The pipes that are penetrating the insulation give air leakage and cold bridges, which could be a major part of the losses from the storage. The identified losses from the bottom of the storage are exceptionally high, but have less importance for the heat losses, due to the lower temperatures in the bottom. High losses from the bottom can be caused by air leakage through the insulation at the pipe connections of the storage.

Tid som välfärdsfaktor : förändrade motiv i svensk arbetstidspolicy

Time as a welfare factor This article presents the results of an archive study of working time development in Sweden. It investigates how structural policy change is moving from a social discourse closely related to Swedish welfare reforms, towards an economic discourse motivated by financial arguments. By doing so, the political measures to solve working time related problems in today’s flexible working life appear to be contradictory. On one side we find time-poor people on the labour market mainly supported by tax-reductions and private time saving solutions. On the other side we find time-rich people mainly supported by activation programs and/or welfare benefits. This is a system and a policy strategy that obviously disregards the other side of the coin.

Clustering Lab value working with medical data

Data mining is a relatively new field of research that its objective is to acquire knowledge from large amounts of data. In medical and health care areas, due to regulations and due to the availability of computers, a large amount of data is becoming available [27]. On the one hand, practitioners are expected to use all this data in their work but, at the same time, such a large amount of data cannot be processed by humans in a short time to make diagnosis, prognosis and treatment schedules. A major objective of this thesis is to evaluate data mining tools in medical and health care applications to develop a tool that can help make rather accurate decisions. In this thesis, the goal is finding a pattern among patients who got pneumonia by clustering of lab data values which have been recorded every day. By this pattern we can generalize it to the patients who did not have been diagnosed by this disease whose lab values shows the same trend as pneumonia patients does. There are 10 tables which have been extracted from a big data base of a hospital in Jena for my work .In ICU (intensive care unit), COPRA system which is a patient management system has been used. All the tables and data stored in German Language database.

Influences of infrastructure and attitudes to health on value of travel time savings in bicycle journeys

In this paper we investigate how attitudes to health and exercise in connection with cycling influence the estimation of values of travel time savings in different kinds of bicycle environments (mixed traffic, bicycle lane in the road way, bicycle path next to the road, and bicycle path not in connection with the road). The results, based on two Swedish stated choice studies, suggest that the values of travel time savings are lower when cycling in better conditions. Surprisingly, the respondents do not consider cycling on a path next to the road worse than cycling on a path not in connection to the road, indicating that they do not take traffic noise and air pollution into account in their decision to cycle. No difference can be found between cycling on a road way (mixed traffic) and cycling in a bicycle lane in the road way. The results also indicate that respondents that include health aspects in their choice to cycle have lower value of travel time savings for cycling than respondents that state that health aspects are of less importance, at least when cycling on a bicycle path. The appraisals of travel time savings regarding cycling also differ a lot depending on the respondents’ alternative travel mode. The individuals who stated that they will take the car if they do not cycle have a much higher valuation of travel time savings than the persons stating public transport as the main alternative to cycling.