Road Design for Future Maintenance : Life-cycle Cost Analyses for Road Barriers

The cost of a road construction over its service life is a function of design, quality of construction as well as maintenance strategies and operations. An optimal life-cycle cost for a road requires evaluations of the above mentioned components. Unfortunately, road designers often neglect a very important aspect, namely, the possibility to perform future maintenance activities. Focus is mainly directed towards other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This doctoral thesis presents the results of a research project aimed to increase consideration of road maintenance aspects in the planning and design process. The following subgoals were established: Identify the obstacles that prevent adequate consideration of future maintenance during the road planning and design process; and Examine optimisation of life-cycle costs as an approach towards increased efficiency during the road planning and design process. The research project started with a literature review aimed at evaluating the extent to which maintenance aspects are considered during road planning and design as an improvement potential for maintenance efficiency. Efforts made by road authorities to increase efficiency, especially maintenance efficiency, were evaluated. The results indicated that all the evaluated efforts had one thing in common, namely ignorance of the interrelationship between geometrical road design and maintenance as an effective tool to increase maintenance efficiency. Focus has mainly been on improving operating practises and maintenance procedures. This fact might also explain why some efforts to increase maintenance efficiency have been less successful. An investigation was conducted to identify the problems and difficulties, which obstruct due consideration of maintainability during the road planning and design process. A method called “Change Analysis” was used to analyse data collected during interviews with experts in road design and maintenance. The study indicated a complex combination of problems which result in inadequate consideration of maintenance aspects when planning and designing roads. The identified problems were classified into six categories: insufficient consulting, insufficient knowledge, regulations and specifications without consideration of maintenance aspects, insufficient planning and design activities, inadequate organisation and demands from other authorities. Several urgent needs for changes to eliminate these problems were identified. One of the problems identified in the above mentioned study as an obstacle for due consideration of maintenance aspects during road design was the absence of a model for calculating life-cycle costs for roads. Because of this lack of knowledge, the research project focused on implementing a new approach for calculating and analysing life-cycle costs for roads with emphasis on the relationship between road design and road maintainability. Road barriers were chosen as an example. The ambition is to develop this approach to cover other road components at a later stage. A study was conducted to quantify repair rates for barriers and associated repair costs as one of the major maintenance costs for road barriers. A method called “Case Study Research Method” was used to analyse the effect of several factors on barrier repairs costs, such as barrier type, road type, posted speed and seasonal effect. The analyses were based on documented data associated with 1625 repairs conducted in four different geographical regions in Sweden during 2006. A model for calculation of average repair costs per vehicle kilometres was created. Significant differences in the barrier repair costs were found between the studied barrier types. In another study, the injuries associated with road barrier collisions and the corresponding influencing factors were analysed. The analyses in this study were based on documented data from actual barrier collisions between 2005 and 2008 in Sweden. The result was used to calculate the cost for injuries associated with barrier collisions as a part of the socio-economic cost for road barriers. The results showed significant differences in the number of injuries associated with collisions with different barrier types. To calculate and analyse life-cycle costs for road barriers a new approach was developed based on a method called “Activity-based Life-cycle Costing”. By modelling uncertainties, the presented approach gives a possibility to identify and analyse factors crucial for optimising life-cycle costs. The study showed a great potential to increase road maintenance efficiency through road design. It also showed that road components with low investment costs might not be the best choice when including maintenance and socio-economic aspects. The difficulties and problems faced during the collection of data for calculating life-cycle costs for road barriers indicated a great need for improving current data collecting and archiving procedures. The research focused on Swedish road planning and design. However, the conclusions can be applied to other Nordic countries, where weather conditions and road design practices are similar. The general methodological approaches used in this research project may be applied also to other studies.

Tidig föräldrastress hos mammor med för tidigt födda barn

Bakgrund: Att bli mamma till ett för tidigt fött barn (<37 gestationsveckor) innebär en oväntad stress vilket påverkar hela familjen. Under de senaste årtionden har stora förbättringar skett inom perinatal vård och numera är chansen till överlevnad stor. Att barnet efter födseln vårdas på neonatal intensivvårdsavdelning (NICU) får konsekvenser för mamman både känslomässigt och i omvårdnaden av barnet. Syfte: Att undersöka föräldrastress och beskriva faktorer som påverkar tidig föräldrastress hos mammor till för tidigt födda barn när barnet är två månader i korrigerad ålder. Metod: Studien utfördes på fyra NICU i Sverige. Inklusionskriterierna för studien var att barnet var för tidigt fött samt vårdades på neonatalavdelning i minst 72 timmar. För att mäta upplevd föräldrastress fick mammorna (n=276) svara på enkäten Swedish Parental Stress Questionnaire (SPSQ) när barnet var två månader i korrigerad ålder. Resultat: Mammor vars barn inte vårdades på en samvårdsavdelning, som hade barn i kuvös, mammor till barn med äldre syskon, var äldre, rökte och/eller ammade helt upplevde mer föräldrastress än övriga mammor. Slutsats: Studien visar att faktorer i framför allt i miljön samt hos mamman har betydelse för upplevd föräldrastress. Våra resultat innebär att omhändertagandet bör bli bättre, både under tiden på neonatalavdelning men även efter utskrivning. Då studien också påvisar vikten av samvårdsavdelning bör förbättringar ske i den fysiska vårdmiljön för att minimera upplevelsen av föräldrastress.

Förlossningsrädda kvinnors erfarenheter av Aurorasamtal ett till två år efter förlossning

Bakgrund: Av alla gravida kvinnor räknas omkring 5 % lida av svår förlossningsrädsla. Kvinnor med förlossningsrädsla löper högre risk för komplikationer under och efter graviditeten. I Sverige läggs idag mycket resurser på Auroraverksamhet för att hjälpa kvinnor med förlossningsrädsla. Det saknas omfattande utvärdering av Auroraverksamheten. Syfte: Syftet med detta fördjupningsarbete var att undersöka upplevelse och effekt av Aurorasamtal inför förlossning samt upplevelse av den efterföljande förlossningen bland först- och omföderskor. Metod: Studien har en retrospektiv studiedesign där datainsamling skedde via en enkätundersökning. Datamaterialet sammanställdes därefter i SPSS. Resultat: Majoriteten av kvinnorna upplevde att samtalen hjälpte dem till en mer positiv förlossningsupplevelse. Fler förstföderskor än omföderskor önskade planerat kejsarsnitt när de kom till Auroramottagningen. De flesta kvinnor som önskade vaginal förlossning blev vaginalt förlösta. Över hälften av kvinnorna som deltog i studien var mindre rädda för förlossning 1 – 2 år efter förlossningen än de upplevde att de var innan Aurorasamtalet och förlossningen. Konklusion: Aurorasamtal förefaller ha störst betydelse för omföderskor och för de kvinnor som önskar vaginal förlossning.

Vindkraft i Dalarna : Från acceptans och lokalisering till planering och eftertanke

This thesis examines prerequisites for wind power diffusion in a county in Sweden that quite recently was concidered to be of interest for electricty production from renewable energy sources. Three different municipalities: Falun, Mora and Orsa in the county of Dalarna are highlighted.  Their view on permitting processes of wind power installations are investigated. Other actors, such as exploiters and local citizens are also being analysed. This study shows that the local acceptance was very high when the first wind power parks were built, much thanks to local politicians and local citizens. For the politicians the wind power symbolised a key to a better green society, for the local citizens the wind power meant some economical advantages. The first wind power parks were localised to areas because of good wind conditions and social factors, especially from local communities. However, results from this study shows that the acceptance for wind power the last few years, in generel, has decreased.  The local authorities have also been conscious of some negative consequenses from already built wind power parks.  As a response they started to add planning tools to the permitting process.

A testing and demonstration facility for PV systems and components

A test and demonstration facility for PV and PV hybrid systems and system components has been designed and installed at Dalarna University in Sweden. The facility allows studies of complete PV systems or single components in a range of 0.1-10 kW. The facility includes two grid-connected PV systems, a PV Hybrid off-grid system, three emulators and the necessary measurement and control equipment. Tests can be done manually or automatically through programmed test procedures controlled that will be implemented in Labview. The facility shall be used by researchers, professionals of the industry and engineering students.

Elbesparing med pelletkaminer och solvärme i direktelvärmda småhus

The aim of this study was to investigate how electricallyheated houses can be converted to using wood pellet and solarheating. There are a large number of wood pellet stoves on themarket. Many stoves have a water jacket, which gives anopportunity to distribute the heat to domestic hot water and aradiator heating system. Three typical Swedish houses with electric resistanceheating have been studied. Fourteen different system conceptsusing wood pellet stoves and solar heating systems have beenevaluated. The systems and the houses have been simulated indetail using TRNSYS. The houses have been divided in up to 10different zones and heat transfer by air circulation throughdoorways and open doors have been simulated. The pellet stoveswere simulated using a recently developed TRNSYS component,which models the start- and stop phases, emissions and thedynamic behaviour of the stoves. The model also calculates theCO-emissions. Simulations were made with one stove without awater jacket and two stoves with different fractions of thegenerated heat distributed in the water circuit. Simulations show that the electricity savings using a pelletstove are greatly affected by the house plan, the systemchoice, if the internal doors are open or closed and thedesired level of comfort. Installing a stove with awater-jacket connected to a radiator system and a hot waterstorage has the advantage that heat can be transferred todomestic hot water and be distributed to other rooms. Suchsystems lead to greater electricity savings, especially inhouses having a traditional layout. It was found that not allrooms needed radiators and that it was more effective in mostcases t use a stove with a higher fraction of the heatdistributed by the water circuit. The economic investigation shows that installing a woodpellet stove without a water jacket gives the lowest totalenergy- and capital costs in the house with an open plan (fortoday's energy prices and the simulated comfort criteria). Inthe houses with a traditional layout a pellet stove givesslightly higher costs than the reference house having onlyelectrical resistance heating due to the fact that less heatingcan be replaced. The concepts including stoves with a waterjacket all give higher costs than the reference system, but theconcept closest to be economical is a system with a bufferstore, a stove with a high fraction of the heat distributed bythe water circuit, a new water radiator heating system and asolar collector. Losses from stoves can be divided into: flue gas lossesincluding leakage air flow when the stove is not in operation;losses during start and stop phases; and losses due to a highair factor. An increased efficiency of the stoves is importantboth from a private economical point of view, but also from theperspective that there can be a lack of bio fuel in the nearfuture also in Sweden. From this point of view it is alsoimportant to utilize as much solar heat as possible. Theutilization of solar heat is low in the simulated systems,depending on the lack of space for a large buffer store. The simulations have shown that the annual efficiency ismuch lower that the nominal efficiency at full power. Thesimulations have also shown that changing the control principlefor the stove can improve efficiency and reduce theCO-emissions. Today's most common control principle for stovesis the on/off control, which results in many starts and stopsand thereby high CO-emissions. A more advanced control varyingthe heating rate from maximum to minimum to keep a constantroom temperature reduces the number of starts and stops andthereby the emissions. Also the efficiency can be higher withsuch a control, and the room temperature will be kept at a moreconstant temperature providing a higher comfort.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Energy Efficiency through Thermal Energy Storage : Possibilities for the Swedish Building Stock

The need for heating and cooling in buildings constitutes a considerable part of the total energy use in a country and reducing this need is of outmost importance in order to reach national and international goals for reducing energy use and emissions. One important way of reaching these goals is to increase the proportion of renewable energy used for heating and cooling of buildings. Perhaps the largest obstacle with this is the often occurring mismatch between the availability of renewable energy and the need for heating or cooling, hindering this energy to be used directly. This is one of the problems that can be solved by using thermal energy storage (TES) in order to save the heat or cold from when it is available to when it is needed. This thesis is focusing on the combination of TES techniques and buildings to achieve increased energy efficiency for heating and cooling. Various techniques used for TES as well as the combination of TES in buildings have been investigated and summarized through an extensive literature review. A survey of the Swedish building stock was also performed in order to define building types common in Sweden. Within the scope of this thesis, the survey resulted in the selection of three building types, two single family houses and one office building, out of which the two residential buildings were used in a simulation case study of passive TES with increased thermal mass (both sensible and latent). The second case study presented in the thesis is an evaluation of an existing seasonal borehole storage of solar heat for a residential community. In this case, real measurement data was used in the evaluation and in comparisons with earlier evaluations. The literature reviews showed that using TES opens up potential for reduced energy demand and reduced peak heating and cooling loads as well as possibilities for an increased share of renewable energy to cover the energy demand. By using passive storage through increased thermal mass of a building it is also possible to reduce variations in the indoor temperature and especially reduce excess temperatures during warm periods, which could result in avoiding active cooling in a building that would otherwise need it. The analysis of the combination of TES and building types confirmed that TES has a significant potential for increased energy efficiency in buildings but also highlighted the fact that there is still much research required before some of the technologies can become commercially available. In the simulation case study it was concluded that only a small reduction in heating demand is possible with increased thermal mass, but that the time with indoor temperatures above 24 °C can be reduced by up to 20%. The case study of the borehole storage system showed that although the storage system worked as planned, heat losses in the rest of the system as well as some problems with the system operation resulted in a lower solar fraction than projected. The work presented within this thesis has shown that TES is already used successfully for many building applications (e.g. domestic hot water stores and water tanks for storing solar heat) but that there still is much potential in further use of TES. There are, however, barriers such as a need for more research for some storage technologies as well as storage materials, especially phase change material storage and thermochemical storage.

Energy Efficiency through Thermal Energy Storage - Evaluation of the Possibilities for the Swedish Building Stock, Phase 1

As a first step in assessing the potential of thermal energy storage in Swedish buildings, the current situation of the Swedish building stock and different storage methods are discussed in this paper. Overall, many buildings are from the 1960’s or earlier having a relatively high energy demand, creating opportunities for large energy savings. The major means of heating are electricity for detached houses and district heating for multi dwelling houses and premises. Cooling needs are relatively low but steadily increasing, emphasizing the need to consider energy storage for both heat and cold. The thermal mass of a building is important for passive storage of thermal energy but this has not been considered much when constructing buildings in Sweden. Instead, common ways of storing thermal energy in Swedish buildings today is in water storage tanks or in the ground using boreholes, while latent thermal energy storage is still very uncommon.

Jämförelsestudie avseende stomsystem : Ramverk eller fackverk/balk/pelar-system

Projektet omfattade en jämförelsestudie avseende stomsystem. Studien undersökte ramverk och fackverk/balk/pelar-system och genomfördes självständigt med stöttning av Ramböll AB´s kontor i Falun. Syftet var främst att undersöka vilka skillnader det finns mellan tvåledsramar och fackverk/balk/pelar-system för lätta hallbyggnader och försöka få klarhet i varför fackverk/balk/pelar-system är det dominerande systemet i Sverige eftersom övriga Europa har tagit en annan utveckling och domineras av tvåledsramar. Studien undersöker skillnaderna mellan systemen i en hallbyggnad med förutbestämda mått i stål.Inledningsvis gjordes en litteraturstudie för att få en bredare bakgrund av systemen och en bättre förståelse om förutsättningarna för varje system. Efter litteraturstudien kunde sedan ett typhus och beräkningsunderlag för jämförelsestudien tas fram. Även en enkätstudie gjordes med syftet att skapa en tydlig bild av vilket stomsystem konstruktörer i Sverige oftast väljer och varför. Resultatet av studien visade att tvåledsramar ger en ökad kostnad jämfört med fackverk/balk/pelar-system i materialåtgång och framställning samt att beräkningarna blir mer komplicerade. Skulle fortsatta studier göras med dessa system i byggnader med andra mått skulle det kanske gå att få fram speciella mått på byggnader där kostnaden för tvåledsramar blir densamma som för fackverk/balk/pelar-system och därför är ett likvärdigt alternativ som stomsystem.En viktig slutsats från projektet är att tvåledsramar används mycket mer sällan än fackverk/balk/pelar-system som stomsystem i lätta hallbyggnader i Sverige på grund av att kostnaderna blir mycket högre med tvåledsramar och att det är ett mer komplicerat system i beräkningsarbetet. De viktigaste slutsatserna från jämförelsestudien går att sammafatta som följande: Tvåledsramar är dyrare att använda. Tvåledsramar är ett mer komplicerat system beräkningsmässigt. Traditionen av att använda tvåledsramar finns inte och därför används inte systemet.

Profiling visitors to Dalarna Museum : What are the motivational factors that influence visitors' frequency of visits

Prior studies on museum visitors are extensively centred on national museums, the studies on regional museums are scarce. To fill in the academic gap, a research is proposed concerning the visitors of Dalarna Museum, a regional museum in Sweden. With an aim to profile visitors’ demographic characteristics and investigate the motivational factors that influence visitors’ frequency of visits, a face-to-face questionnaire survey was implemented at Dalarna Museum. To get visitors’ demographic characteristics, a few closed and open questions are devised to profile visitors’ gender, age, occupation, income, education, number of children and residence place. To investigate the motivational factors that influence visitors’ frequency of visits, a seven-point Likert questionnaire is employed with 17 motivational factors included. During a 12-day data collection, 372 visitors were invited to participate in the questionnaire survey, whereof 357 had filled in the questionnaire, generating a response rate that is as high as 96 percent. After data cleansing, there are 355 completed and valid responses in total. According to the results, some of visitors’ demographic characteristics are similar including gender, age, occupation, income, and number of children. However, the characteristics regarding visitors’ residence places and educational attainments are different comparing the frequent visitors to occasional visitors. Through running a multiple regression analysis, 13 out of the 17 motivational factors are detected having significant influences on visitors’ frequency of visits to Dalarna Museum, of which the most influential one is visitors’ day-outs with their friends and relatives.

Granskning av riktlinjer vid Sveriges förlossningskliniker gällande sfinkterskada i samband med förlossning : Innehållsanalys med en kombination av en deduktiv och induktiv ansats

Background: Sphincter injury is serious complication in connection to vaginal childbirth. Desire to avoid vaginal birth again is seen in women who previously suffered from a sphincter injury. Objective: To identify and evaluate obstetric guidelines in Sweden regarding sphincter injury in relation to childbirth Method: Content analysis with a combination of a deductive and inductive approach. Results: The most frequently occurring risk factors and prevention with help of perineal protection were described in the guidelines. The physician made diagnosis and repaired the sphincter injury at the theatre.  Complications such as coital pain and anal incontinence were described in the guidelines. Paracetamol and diclofenac was most common analgesic regimen given for pain. Prophylaxis such as antibiotic treatment and laxative were common. Information given to women was described. Follow-up by physician, midwife and physiotherapist was recommended after four weeks to six months. For future birth a cesarean section was recommended. Conclusion: The guidelines were constructed in the same way and had to a large extent similar content. The authors of the present work recommend a national guideline.

El cambio de código en hispanohablantes en Suecia : Experiencias y actitudes

In this thesis it is investigated how Spanish-speakers in Sweden experience living with two languages ​​and how common it is for them to use code-switching in their everyday speech. The study has focused on not only the experiences but also the use of code-switching among Hispanics who have become bilinguals in Sweden. The study has also examined the attitudes the informants show towards code – switching.The aim of this study is to provide a picture of the experiences Spanish-speakers have of becoming bilinguals in Sweden and of learning and using Swedish as a second language. It is of interest to see how the bilinguals converse inside and outside the home and how frequent and accepted it is among the Hispanics in Sweden with the use of code-switching in different social contexts. In summary, we can see that the Hispanics in Sweden are satisfied with the linguistic development they have experienced by learning a new language and that they consider it beneficial being bilingual. The study shows that code-switching is very much used, but not fully accepted even by those who use it on a daily basis. Code-switching is in many cases not considered appropriate and it is sometimes performed unconsciously.

À la recherche des facteurs de réussite au lycée : Apprentissage de langues en ligne au lycée - une étude

The aim of this academic essay is to research into Distance teaching in language education at a comprehensive upper high school in a region in Sweden. Qualitative and quantitative studies are combined by using evaluation and interview methods with students who have completed their studies and with those who have decided to terminate them 2012/2013. The goals are to identify success factors and elements in devising and compiling on-line language courses thus eliminating failure by students unable / choosing not to complete courses. Present Distance teaching is mostly applicable for the already motivated students and research shows that measures can be taken to increase the percentage of successful and satisfied students.

Defining Relevant Product Markets for Pharmaceuticals

To identify the relevant product markets for Swedish pharmaceuticals, a spatial econometrics approach is employed. First, we calculate Moran’s Is for different market definitions and then we use a spatial Durbin model to determine the effect of price changes on quantity sold off own and competing products. As expected, the results show that competition is strongest between close substitutes; however, the relevant product markets for Swedish pharmaceuticals extend beyond close substitutes down to products included in the same class on the four-digit level of the Anatomic Therapeutic Chemical system as defined by the World Health Organization. The spatial regression model further indicates that increases in the price of a product significantly lower the quantity sold of that product and in the same time increase the quantity sold of competing products. For close substitutes (products belonging to the same class on the seven-digit level of the Anatomic Therapeutic Chemical system), as well as for products that, without being close substitutes, belong to the same therapeutic/pharmacological/chemical subgroup (the same class on the five-digit level of the Anatomic Therapeutic Chemical system), a significant change towards increased competition is also visible after 1 July 2009 when the latest policy changes with regards to pharmaceuticals have been implemented in Sweden.