Towards a life-event oriented G2C e-service provision: the NoBLE Framework

One of the primary features of modern government-to-citizen (G2C) service provision is the ability to offer a citizen-centric view of the e-government portal. Life-event approach is one of the most widely adopted paradigms supporting the idea of solving a complex event in a citizen’s life through a single service provision. Several studies have used this approach to design e-government portals. However, they were limited in terms of use and scalability. There were no mechanisms that show how to specify a life-event for structuring public e-services, or how to systematically match life-events with these services taking into consideration the citizen needs. We introduce the NOrm-Based Life-Event (NoBLE) framework for G2C e-service provision with a set of mechanisms as a guide for designing active life-event oriented e-government portals.

The price of space: the convergence of value in use and value in exchange

This paper discusses concepts of value from the point of view of the user of the space and the counter view of the provider of the same. Land and property are factors of production. The value of the land flows from the use to which it is put, and that in turn, is dependent upon the demand (and supply) for the product or service that is produced/provided from that space. If there is a high demand for the product (at a fixed level of supply), the price will increase and the economic rent for the land/property will increase accordingly. This is the underlying paradigm of Ricardian rent theory where the supply of land is fixed and a single good is produced. In such a case the rent of land is wholly an economic rent. Economic theory generally distinguishes between two kinds of price, price of production or “value in use” (as determined by the labour theory of value), and market price or “value in exchange” (as determined by supply and demand). It is based on a coherent and consistent theory of value and price. Effectively the distinction is between what space is ‘worth’ to an individual and that space’s price of exchange in the market place. In a perfect market where any individual has access to the same information as all others in the market, price and worth should coincide. However in a market where access to information is not uniform, and where different uses compete for the same space, it is more likely that the two figures will diverge. This paper argues that the traditional reliance of valuers to use methods of comparison to determine “price” has led to an artificial divergence of “value in use” and “value in exchange”, but now such comparison are becoming more difficult due to the diversity of lettings in the market place, there will be a requirement to return to fundamentals and pay heed to the thought process of the user in assessing the worth of the space to be let.

Modelling capability and affordance as properties of human/machine resource systems

Understanding how and why the capability of one set of business resources, its structural arrangements and mechanisms compared to another works can provide competitive advantage in terms of new business processes and product and service development. However, most business models of capability are descriptive and lack formal modelling language to qualitatively and quantifiably compare capabilities, Gibson’s theory of affordance, the potential for action, provides a formal basis for a more robust and quantitative model, but most formal affordance models are complex and abstract and lack support for real-world applications. We aim to understand the ‘how’ and ‘why’ of business capability, by developing a quantitative and qualitative model that underpins earlier work on Capability-Affordance Modelling – CAM. This paper integrates an affordance based capability model and the formalism of Coloured Petri Nets to develop a simulation model. Using the model, we show how capability depends on the space time path of interacting resources, the mechanism of transition and specific critical affordance factors relating to the values of the variables for resources, people and physical objects. We show how the model can identify the capabilities of resources to enable the capability to inject a drug and anaesthetise a patient.

A new regime of carbon counting: the practices and politics of accounting for everyday carbon through C02e

Inspired by the commercial desires of global brands and retailers to access the lucrative green consumer market, carbon is increasingly being counted and made knowable at the mundane sites of everyday production and consumption, from the carbon footprint of a plastic kitchen fork to that of an online bank account. Despite the challenges of counting and making commensurable the global warming impact of a myriad of biophysical and societal activities, this desire to communicate a product or service's carbon footprint has sparked complicated carbon calculative practices and enrolled actors at literally every node of multi-scaled and vastly complex global supply chains. Against this landscape, this paper critically analyzes the counting practices that create the ‘e’ in ‘CO2e’. It is shown that, central to these practices are a series of tools, models and databases which, in building upon previous work (Eden, 2012 and Star and Griesemer, 1989) we conceptualize here as ‘boundary objects’. By enrolling everyday actors from farmers to consumers, these objects abstract and stabilize greenhouse gas emissions from their messy material and social contexts into units of CO2e which can then be translated along a product's supply chain, thereby establishing a new currency of ‘everyday supply chain carbon’. However, in making all greenhouse gas-related practices commensurable and in enrolling and stabilizing the transfer of information between multiple actors these objects oversee a process of simplification reliant upon, and subject to, a multiplicity of approximations, assumptions, errors, discrepancies and/or omissions. Further the outcomes of these tools are subject to the politicized and commercial agendas of the worlds they attempt to link, with each boundary actor inscribing different meanings to a product's carbon footprint in accordance with their specific subjectivities, commercial desires and epistemic framings. It is therefore shown that how a boundary object transforms greenhouse gas emissions into units of CO2e, is the outcome of distinct ideologies regarding ‘what’ a product's carbon footprint is and how it should be made legible. These politicized decisions, in turn, inform specific reduction activities and ultimately advance distinct, specific and increasingly durable transition pathways to a low carbon society.

Achieving customer satisfaction through integrated products and services: an exploratory study

Complex products such as manufacturing equipment have always needed maintenance and repair services. Increasingly, leading manufacturers are integrating products and services to generate increased revenues and achieve customer satisfaction. Designing integrated products and services requires a different approach to new product development and a clear understanding of how customers perceive the value they obtain from actual usage of products and services—so-called value-in-use. However, there is a lack of research on integrated products and services and how they impact customer satisfaction. An exploratory study was undertaken to understand customers’ views on integrated products and services and the value-in-use derived from such offerings. As value-in-use and its impacts are complicated concepts, a technique from psychology—Repertory Grid Technique—was used to gather data in 33 interviews. The interviews allowed a deep understanding of customer views on integrated products and services to be obtained, and a systematic analysis identified the key attributes of value-in-use. In order to probe further, the data were then analyzed using Honey’s procedure, which identified the impact of the attributes of value-in-use on customer satisfaction. Two key attributes—relational dynamic and access—were found to have the most influence on customer satisfaction. This paper contributes to the innovation field by identifying customer needs for integrated products and services and how these impact customer satisfaction. These are key points and need to be fully considered by managers during new product and service development. Similarly, the paper identifies a number of important areas for further research.

Uptake of a free coronary heart disease risk screening programme in community pharmacy: the Healthy Heart Assessment service

Introduction Health promotion (HP) aims to enhance good health while preventing ill-health at three levels of activity; primary (preventative), secondary (diagnostic) and tertiary (management).1 It can range from simple provision of health education to ongoing support, but the effectiveness of HP is ultimately dependent on its ability to influence change. HP as part of the Community Pharmacy Contract (CPC) aims to increase public knowledge and target ‘hard-to-reach’ individuals by focusing mainly on primary and tertiary HP. The CPC does not include screening programmes (secondary HP) as a service. Coronary heart disease (CHD) is a significant cause of morbidity and mortality in the UK. While there is evidence to support the effectiveness of some community pharmacy HP strategies in CHD, there is paucity of research in relation to screening services.2 Against this background, Alliance Pharmacy introduced a free CHD risk screening programme to provide tailored HP advice as part of a participant–pharmacist consultation. The aim of this study is to report on the CHD risk levels of participants and to provide a qualitative indication of consultation outcomes. Methods Case records for 12 733 people who accessed a free CHD risk screening service between August 2004 and April 2006 offered at 217 community pharmacies were obtained. The service involved initial self-completion of the Healthy Heart Assessment (HHA) form and measurement of height, weight, body mass index, blood pressure, total cholesterol and highdensity lipoprotein levels by pharmacists to calculate CHD risk.3 Action taken by pharmacists (lifestyle advice, statin recommendation or general practitioner (GP) referral) and qualitative statements of advice were recorded, and a copy provided to the participants. The service did not include follow-up of participants. All participants consented to taking part in evaluations of the service. Ethical committee scrutiny was not required for this service development evaluation. Results Case records for 10 035 participants (3658 male) were evaluable; 5730 (57%) were at low CHD risk (<15%); 3636 (36%) at moderate-to-high CHD risk (≥15%); and 669 (7%) had existing heart disease. A significantly higher proportion of male (48% versus 30% female) participants were at moderate- to-high risk of CHD (chi-square test; P < 0.005). A range of outcomes resulted from consultations. Lifestyle advice was provided irrespective of participants’ CHD risk or existing disease. In the moderate-to-high-risk group, of which 52% received prescribed medication, lifestyle advice was recorded for 62%, 16% were referred and 34% were advised to have a re-assessment. Statin recommendations were made in 1% of all cases. There was evidence of supportive and motivational statements in the advice recorded. Discussion Pharmacists were able to identify individuals’ level of CHD risk and provide them with bespoke advice. Identification of at-risk participants did not automatically result in referrals or statin recommendation. One-third of those accessing the screening service had moderate-to-high risk of CHD, a significantly higher proportion of whom were men. It is not known whether these individuals had been previously exposed to HP but presumably by accessing this service they may have contemplated change. As effectiveness of HP advice will depend among other factors on ability to influence change, future consultations may need to explore patients’ attitude towards change in relation to the Trans Theoretical Model4 to better tailor HP advice. The high uptake of the service by those at moderate-to-high CHD risk indicates a need for this type of screening programme in community pharmacy, perhaps specifically to reach men who access medical services less.

Dual semiosis analysis model managing customer-focused service innovation

Customers will not continue to pay for a service if it is perceived to be of poor quality, and/or of no value. With a paradigm shift towards business dependence on service orientated IS solutions [1], it is critical that alignment exists between service definition, delivery, and customer expectation, businesses are to ensure customer satisfaction. Services, and micro-service development, offer businesses a flexible structure for solution innovation, however, constant changes in technology, business and societal expectations means an iterative analysis solution is required to i) determine whether provider services adequately meet customer segment needs and expectations, and ii) to help guide business service innovation and development. In this paper, by incorporating multiple models, we propose a series of steps to help identify and prioritise service gaps. Moreover, the authors propose the Dual Semiosis Analysis Model, i.e. a tool that highlights where within the symbiotic customer / provider semiosis process, requirements misinterpretation, and/or service provision deficiencies occur. This paper offers the reader a powerful customer-centric tool, designed to help business managers highlight both what services are critical to customer quality perception, and where future innovation

Sustainable development, rolled-out neoliberalism and sustainable communities

Recent contributions by geographers on the relationships between states and citizens have documented the rise of rolled-out neoliberalism. Development agendas are, it is argued, increasingly dominated by the principles of market-driven reforms, social inequality, and a drive towards enhancing the economic competitiveness of the supply side of the economy. However, at the same time, a parallel set of discourses has emerged in the development literature which argues that it is principles of sustainable development that have, in practice, become dominant. The emphasis is, instead, on democratic empowerment, environmental conservation, and social justice. This paper examines the relationships between these ostensibly very different interpretations of contemporary development with an assessment of one of the Labour government's most ambitious planning agendas-the publication in February 2003 of the document Sustainable Communities: Building for the Future. The proposals are promoted as a "step change" in the planning system with a new emphasis on tackling shortages of housing in the South East and reviving the economy of the Thames Gateway area. The paper assesses the different ways in which such programmes can be interpreted and argues that contemporary development practices in countries such as Britain are constituted by a hybridity of approaches and rationalities and cannot be reduced to simple characterisations of rolled-out neoliberalism or sustainable development.

A double data rate (DDR) architecture for OFDM based wireless consumer devices

The creation of OFDM based Wireless Personal Area Networks (WPANs) has allowed high bit-rate wireless communication devices suitable for streaming High Definition video between consumer products as demonstrated in Wireless- USB. However, these devices need high clock rates, particularly for the OFDM sections resulting in high silicon cost and high electrical power. Acknowledging that electrical power in wireless consumer devices is more critical than the number of implemented logic gates, this paper presents a Double Data Rate (DDR) architecture to reduce the OFDM input and output clock rate by a factor of 2. The architecture has been implemented and tested for Wireless-USB (ECMA-368) resulting in a maximum clock of 264MHz instead of 528MHz existing anywhere on the die.

Floral meristem indeterminacy depends on flower position and is facilitated by acarpellate gynoecium development in Impatiens balsamina

Floral meristems are generally determinate. Termination of their activity varies with species, occurring after carpel or ovule development, depending on the placentation type. In terminal flowering Impatiens balsamina (cv. Dwarf Bush Flowered) some flowers exhibit meristem indeterminacy; they produce organs from the placenta after ovule development. Here we provide a detailed description of gynoecium development in this line and explore the basis of the indeterminate nature of some of its floral meristems. We find that the placenta is sometimes established without complete carpel fusion. Proliferative growth derives from meristematic remnants of the placenta and is more common in the terminal inflorescence. RNA in situ hybridization reveals that IbLFY (Impatiens LFY homologue) is expressed in all meristem states, even in proliferating meristems. Expression of IbAG in axillary flowers is as expected in the meristem, stamens and carpels but absent from the proliferating meristem. We conclude that I. balsamina has cauline placentation. Incomplete suppression of inflorescence identity in flowers of the terminal inflorescence leads to floral meristem proliferation after ovule development in this species.

Understanding construction consortia: Theory, practice and opinions

Firms form consortia in order to win contracts. Once a project has been awarded to a consortium each member then concentrates on his or her own contract with the client. Therefore, consortia are marketing devices, which present the impression of teamworking, but the production process is just as fragmented as under conventional procurement methods. In this way, the consortium forms a barrier between the client and the actual construction production process. Firms form consortia, not as a simple development of normal ways of working, but because the circumstances for specific projects make it a necessary vehicle. These circumstances include projects that are too large or too complex to undertake alone or projects that require on-going services which cannot be provided by the individual firms inhouse. It is not a preferred way of working, because participants carry extra risk in the form of liability for the actions of their partners in the consortium. The behaviour of members of consortia is determined by their relative power, based on several factors, including financial commitment and ease of replacement. The level of supply chain visibility to the public sector client and to the industry is reduced by the existence of a consortium because the consortium forms an additional obstacle between the client and the firms undertaking the actual construction work. Supply chain visibility matters to the client who otherwise loses control over the process of construction or service provision, while remaining accountable for cost overruns. To overcome this separation there is a convincing argument in favour of adopting the approach put forward in the Project Partnering Contract 2000 (PPC2000) Agreement. Members of consortia do not necessarily go on to work in the same consortia again because members need to respond flexibly to opportunities as and when they arise. Decision-making processes within consortia tend to be on an ad hoc basis. Construction risk is taken by the contractor and the construction supply chain but the reputational risk is carried by all the firms associated with a consortium. There is a wide variation in the manner that consortia are formed, determined by the individual circumstances of each project; its requirements, size and complexity, and the attitude of individual project leaders. However, there are a number of close working relationships based on generic models of consortia-like arrangements for the purpose of building production, such as the Housing Corporation Guidance Notes and the PPC2000.

Offering 802.11 MAC frame transport over multiband OFDM for consumer devices

A method to map all the variants of the IEEE 802.11 MAC frames into the Multiband OFDM based ECMA-368 Physical standard is proposed, without contravening the standard. The transportation of IEEE 802.11 MAC frames over ECMA-368 allows for the migration current of Wireless LAN applications towards a Wireless Personal Area Network (WPAN) solution. This system benefits the Consumer Electronics Market as the high data-rate WPAN is capable of transporting broadcast-quality video while the same system can also transport existing applications available today, maintaining existing effort, products and backward-compatibility(1).