A microblock ionomer in proton exchange membrane electrolysis for the production of high purity hydrogen

Proton exchange membranes (PEM’s) are currently under investigation for membrane water electrolysis (PEMWE) to deliver efficient production of the high purity hydrogen needed to supply emerging clean-energy technologies such as hydrogen fuel cells. The microblock aromatic ionomer described in this work achieves high mechanical strength in an aqueous environment as a result of its designed, biphasic morphology and displays many of the qualities required in a PEM. The new ionomer membrane thus shows good proton conductivity (63 mS cm−1 at 80 °C and 100% RH), while retaining mechanical integrity under high temperature, hydrated conditions. Testing in electrolysis has shown good energy efficiency (1.67 V at 1 A cm−2 and 80 °C, corresponding to 4 kWh/Nm3 of H2), making this ionomer a potential candidate for commercial application in PEMWE.

A comparison of methods for constructing confidence intervals after phase II/III clinical trials

Recently, in order to accelerate drug development, trials that use adaptive seamless designs such as phase II/III clinical trials have been proposed. Phase II/III clinical trials combine traditional phases II and III into a single trial that is conducted in two stages. Using stage 1 data, an interim analysis is performed to answer phase II objectives and after collection of stage 2 data, a final confirmatory analysis is performed to answer phase III objectives. In this paper we consider phase II/III clinical trials in which, at stage 1, several experimental treatments are compared to a control and the apparently most effective experimental treatment is selected to continue to stage 2. Although these trials are attractive because the confirmatory analysis includes phase II data from stage 1, the inference methods used for trials that compare a single experimental treatment to a control and do not have an interim analysis are no longer appropriate. Several methods for analysing phase II/III clinical trials have been developed. These methods are recent and so there is little literature on extensive comparisons of their characteristics. In this paper we review and compare the various methods available for constructing confidence intervals after phase II/III clinical trials.

Environmental controls on the production of calcium carbonate by earthworms

Lumbricus terrestris earthworms produce calcium carbonate (CaCO3) granules with unknown physiological function. To investigate carbon sequestration potential, the influence of temperature and CO2 concentration ([CO2]) on CaCO3 production was investigated using three soils, five temperatures(3-20 C) and four atmospheric [CO2] (439-3793 ppm). Granule production rates differed between soils, but could not be related to any soil characteristics measured. Production rates increased with temperature, probably because of higher metabolic rate, and with soil CO2 concentration. Implications for carbon sequestration are discussed. CaCO3 production in earthworms is probably related to pH regulation of blood and tissue fluid in the high CO2 environment of the soil.

The effect of artificial diet on the production of alarm pheromone by Myzus persicae.

The cornicle secretion of Myzus persicae reared on artificial diet only elicits an alarm response in plant-reared conspecifics after the young aphids have been transferred to plants for 7days. Acetate in the form of 0.32% sodium acetate has been added to the diet as an early step in synthesis of the alarm pheromone, (E)-β-farnesene (EBF). The cornicle secretion of diet-reared aphids then elicits an alarm response. However, there is no difference in internal EBF concentration between plant- and diet-reared aphids. Puncturing aphids, either plant- or diet-reared, with a pin shows that both can elicit an alarm response, whereas it is reduced by half with diet-reared individuals. Although there is no significant difference in the concentration of EBF produced, the total amount in diet-reared aphids is increased by acetate in the diet to a level similar to that in plant-reared individuals: the size of aphids reared on an acetate-supplemented diet is increased and comparable with the size of those that are plant-reared. Bioassays with a range of EBF concentrations show a high threshold for the alarm response. It is concluded that the different size of aphids reared on plants and standard diet results in them secreting, respectively, above and below the response threshold.

A comparison of methods for treatment selection in seamless phase II/III clinical trials incorporating information on short-term endpoints

In an adaptive seamless phase II/III clinical trial interim analysis, data are used for treatment selection, enabling resources to be focused on comparison of more effective treatment(s) with a control. In this paper, we compare two methods recently proposed to enable use of short-term endpoint data for decision-making at the interim analysis. The comparison focuses on the power and the probability of correctly identifying the most promising treatment. We show that the choice of method depends on how well short-term data predict the best treatment, which may be measured by the correlation between treatment effects on short- and long-term endpoints.

Investigations into plant biochemical wound-response pathways involved in the production of aphid-induced plant volatiles

Feeding damage to plants by insect herbivores induces the production of plant volatiles, which are attractive to the herbivores natural enemies. Little is understood about the plant biochemical pathways involved in aphid-induced plant volatile production. The aphid parasitoid Diaeretiella rapae can detect and respond to aphid-induced volatiles produced by Arabidopsis thaliana. When given experience of those volatiles, it can learn those cues and can therefore be used as a novel biosensor to detect them. The pathways involved in aphid-induced volatile production were investigated by comparing the responses of D. rapae to volatiles from a number of different transgenic mutants of A. thaliana, mutated in their octadecanoid, ethylene or salicylic acid wound-response pathways and also from wild-type plants. Plants were either undamaged or infested by the peach-potato aphid, Myzus persicae. It is demonstrated that the octadecanoid pathway and specifically the COI1 gene are required for aphid-induced volatile production. The presence of salicylic acid is also involved in volatile production. Using this model system, in combination with A. thaliana plants with single point gene mutations, has potential for the precise dissection of biochemical pathways involved in the production of aphid-induced volatiles

'All in one stroke': Grimms' fairy tales and the TV-production of a new Germany

The article looks at the most recent TV adaptations of the Grimms’ fairy tales by public broadcasting. Realized and marketed as a season which started in 2008,the thirty-four currently existing individual films constitute a significant national project that presents highly appealing notions of the German past to an audience divided over national conflict and demands of globalization. With children and adolescents at the centre, the films offer the young as a generation of moral superiority that facilitates social harmony and moral consensus. This post-unification utopia is beautifully realized on screen but rests on very conservative assumptions about gender, social driving forces, and political order.

Sticking to the script? The co-production of Neighbourhood Planning in England

Efforts to engage with communities in spatial planning have been criticised as being tokenistic, vehicles for co-option or designed to promote neo-liberal agendas. The introduction of neighbourhood planning (NP) in England under the Localism Act (2011) is claimed by proponents to be a step change in the way that local communities are involved in planning their own areas. However, little empirical evidence has yet emerged to substantiate such claims, or provide details about the practices and experiences of NP. The paper highlights that there are numerous parties involved in the co-production of Neighbourhood Development Plans and there are numerous instances where ideas, policies and priorities that emerge from within neighbourhoods are being ‘rescripted’ to ensure conformity to a bounded form of collaboration.

Production of milk foams by steam injection: the effects of steam pressure and nozzle design

Foam properties depend on the physico-chemical characteristics of the continuous phase, the method of production and process conditions employed; however the preparation of barista-style milk foams in coffee shops by injection of steam uses milk as its main ingredient which limits the control of foam properties by changing the biochemical characteristics of the continuous phase. Therefore, the control of process conditions and nozzle design are the only ways available to produce foams with diverse properties. Milk foams were produced employing different steam pressures (100-280 kPa gauge) and nozzle designs (ejector, plunging-jet and confined-jet nozzles). The foamability of milk, and the stability, bubble size and texture of the foams were investigated. Variations in steam pressure and nozzle design changed the hydrodynamic conditions during foam production, resulting in foams having a range of properties. Steam pressure influenced foam characteristics, although the net effect depended on the nozzle design used. These results suggest that, in addition to the physicochemical determinants of milk, the foam properties can also be controlled by changing the steam pressure and nozzle design.

Intercomparison of methods of coupling between convection and large-scale circulation: 1. Comparison over uniform surface conditions

As part of an international intercomparison project, a set of single column models (SCMs) and cloud-resolving models (CRMs) are run under the weak temperature gradient (WTG) method and the damped gravity wave (DGW) method. For each model, the implementation of the WTG or DGW method involves a simulated column which is coupled to a reference state defined with profiles obtained from the same model in radiative-convective equilibrium. The simulated column has the same surface conditions as the reference state and is initialized with profiles from the reference state. We performed systematic comparison of the behavior of different models under a consistent implementation of the WTG method and the DGW method and systematic comparison of the WTG and DGW methods in models with different physics and numerics. CRMs and SCMs produce a variety of behaviors under both WTG and DGW methods. Some of the models reproduce the reference state while others sustain a large-scale circulation which results in either substantially lower or higher precipitation compared to the value of the reference state. CRMs show a fairly linear relationship between precipitation and circulation strength. SCMs display a wider range of behaviors than CRMs. Some SCMs under the WTG method produce zero precipitation. Within an individual SCM, a DGW simulation and a corresponding WTG simulation can produce different signed circulation. When initialized with a dry troposphere, DGW simulations always result in a precipitating equilibrium state. The greatest sensitivities to the initial moisture conditions occur for multiple stable equilibria in some WTG simulations, corresponding to either a dry equilibrium state when initialized as dry or a precipitating equilibrium state when initialized as moist. Multiple equilibria are seen in more WTG simulations for higher SST. In some models, the existence of multiple equilibria is sensitive to some parameters in the WTG calculations.

Production of definite and indefinite articles in typically developing English-speaking children and children with SLI

The present paper examines the production of definite and indefinite articles in English-speaking typically developing (TD) children and children with Specific Language Impairment (SLI). Twenty four English-speaking children with SLI (mean age: 7;5), twenty nine TD age-matched (TD-AM) children (mean age: 7;5) and eleven younger (mean age: 5;5) TD vocabulary-matched (TD-VM) children participated in a production task involving short stories without picture props based on Schafer and de Villiers (2000). Article production was examined in two different semantic contexts for the definite article, namely in the anaphoric and the bridging context. In the anaphoric condition, definiteness is established via linguistic means, whereas in the bridging condition via shared world knowledge. Indefinite article production was examined in the referential specific, non-referential predicational, and non-referential instrumental contexts. The referential specific context involves [+speaker, −hearer] knowledge and the non-referential predicational and instrumental [−speaker, −hearer] knowledge. Results showed that in the definite article contexts, all three groups performed better on the bridging compared with the anaphoric condition; in the indefinite article contexts, they had better performance on the non-referential predicational vs. the referential specific and the non-referential instrumental conditions. In terms of errors, the TD-VM children and the children with SLI produced significantly more substitutions than the TD-AM children in the definite article contexts. In the indefinite article contexts, the three groups did not differ in terms of accuracy or error patterns. The present results point towards problems in the discourse integration of entities that are part of the speaker's and hearer's knowledge in children with SLI and TD-VM controls, especially in definite articles. These problems are accentuated in the children with SLI due to their grammatical impairment and suggest that children with SLI exhibit a delayed acquisition profile.

Utilisation of by-products from sunflower-based biodiesel production processes for the production of fermentation feedstock

By-products streams from a sunflower-based biodiesel plant were utilised for the production of fermentation media that can be used for the production of polyhydroxyalkanoates (PHA). Sunflower meal was utilised as substrate for the production of crude enzyme consortia through solid state fermentation (SSF) with the fungal strain Aspergillus oryzae. Fermented solids were subsequently mixed with unprocessed sunflower meal aiming at the production of a nutrient-rich fermentation feedstock. The highest free amino nitrogen (FAN) and inorganic phosphorus concentrations achieved were 1.5 g L-1 and 246 mg L-1, respectively, when an initial proteolytic activity of 6.4 U mL-1 was used. The FANconcentrationwas increased to 2.3 g L-1 when the initial proteolytic activity was increased to 16 U mL-1. Sunflower meal hydrolysates were mixed with crude glycerol to provide fermentationmedia that were evaluated for the production of poly(3-hydroxybutyrateco- 3-hydroxyvalerate) (P(3HB-co-3HV)) using Cupriavidus necator DSM545. The P(3HB-co-3HV) (9.9 g l-1) produced contained 3HB and 3HV units with 97 and 3 mol %, respectively. Integrating PHA production in existing 1st generation biodiesel production plants through valorisation of by-product streams could improve their sustainability.