Final report on research project PS2010, proof of concept of automated mapping of weeds in arable fields

Many weeds occur in patches but farmers frequently spray whole fields to control the weeds in these patches. Given a geo-referenced weed map, technology exists to confine spraying to these patches. Adoption of patch spraying by arable farmers has, however, been negligible partly due to the difficulty of constructing weed maps. Building on previous DEFRA and HGCA projects, this proposal aims to develop and evaluate a machine vision system to automate the weed mapping process. The project thereby addresses the principal technical stumbling block to widespread adoption of site specific weed management (SSWM). The accuracy of weed identification by machine vision based on a single field survey may be inadequate to create herbicide application maps. We therefore propose to test the hypothesis that sufficiently accurate weed maps can be constructed by integrating information from geo-referenced images captured automatically at different times of the year during normal field activities. Accuracy of identification will also be increased by utilising a priori knowledge of weeds present in fields. To prove this concept, images will be captured from arable fields on two farms and processed offline to identify and map the weeds, focussing especially on black-grass, wild oats, barren brome, couch grass and cleavers. As advocated by Lutman et al. (2002), the approach uncouples the weed mapping and treatment processes and builds on the observation that patches of these weeds are quite stable in arable fields. There are three main aspects to the project. 1) Machine vision hardware. Hardware component parts of the system are one or more cameras connected to a single board computer (Concurrent Solutions LLC) and interfaced with an accurate Global Positioning System (GPS) supplied by Patchwork Technology. The camera(s) will take separate measurements for each of the three primary colours of visible light (red, green and blue) in each pixel. The basic proof of concept can be achieved in principle using a single camera system, but in practice systems with more than one camera may need to be installed so that larger fractions of each field can be photographed. Hardware will be reviewed regularly during the project in response to feedback from other work packages and updated as required. 2) Image capture and weed identification software. The machine vision system will be attached to toolbars of farm machinery so that images can be collected during different field operations. Images will be captured at different ground speeds, in different directions and at different crop growth stages as well as in different crop backgrounds. Having captured geo-referenced images in the field, image analysis software will be developed to identify weed species by Murray State and Reading Universities with advice from The Arable Group. A wide range of pattern recognition and in particular Bayesian Networks will be used to advance the state of the art in machine vision-based weed identification and mapping. Weed identification algorithms used by others are inadequate for this project as we intend to collect and correlate images collected at different growth stages. Plants grown for this purpose by Herbiseed will be used in the first instance. In addition, our image capture and analysis system will include plant characteristics such as leaf shape, size, vein structure, colour and textural pattern, some of which are not detectable by other machine vision systems or are omitted by their algorithms. Using such a list of features observable using our machine vision system, we will determine those that can be used to distinguish weed species of interest. 3) Weed mapping. Geo-referenced maps of weeds in arable fields (Reading University and Syngenta) will be produced with advice from The Arable Group and Patchwork Technology. Natural infestations will be mapped in the fields but we will also introduce specimen plants in pots to facilitate more rigorous system evaluation and testing. Manual weed maps of the same fields will be generated by Reading University, Syngenta and Peter Lutman so that the accuracy of automated mapping can be assessed. The principal hypothesis and concept to be tested is that by combining maps from several surveys, a weed map with acceptable accuracy for endusers can be produced. If the concept is proved and can be commercialised, systems could be retrofitted at low cost onto existing farm machinery. The outputs of the weed mapping software would then link with the precision farming options already built into many commercial sprayers, allowing their use for targeted, site-specific herbicide applications. Immediate economic benefits would, therefore, arise directly from reducing herbicide costs. SSWM will also reduce the overall pesticide load on the crop and so may reduce pesticide residues in food and drinking water, and reduce adverse impacts of pesticides on non-target species and beneficials. Farmers may even choose to leave unsprayed some non-injurious, environmentally-beneficial, low density weed infestations. These benefits fit very well with the anticipated legislation emerging in the new EU Thematic Strategy for Pesticides which will encourage more targeted use of pesticides and greater uptake of Integrated Crop (Pest) Management approaches, and also with the requirements of the Water Framework Directive to reduce levels of pesticides in water bodies. The greater precision of weed management offered by SSWM is therefore a key element in preparing arable farming systems for the future, where policy makers and consumers want to minimise pesticide use and the carbon footprint of farming while maintaining food production and security. The mapping technology could also be used on organic farms to identify areas of fields needing mechanical weed control thereby reducing both carbon footprints and also damage to crops by, for example, spring tines. Objective i. To develop a prototype machine vision system for automated image capture during agricultural field operations; ii. To prove the concept that images captured by the machine vision system over a series of field operations can be processed to identify and geo-reference specific weeds in the field; iii. To generate weed maps from the geo-referenced, weed plants/patches identified in objective (ii).

“Action Research into Pre-sessional Students' Differentiation of Assessments: Using Findings to Improve Courses”

Conference proceedings papaer in Whong, M. (Ed.), Proceedings of the 2007 BALEAP conference: English in a globalising world: English as an academic lingua franca,. Bern: Peter Lang.

‘Purpose’ as a way of helping white trainee history teachers engage with diversity issues

Based on a three year action research project, this study examines one strand of that research, namely the impact that ‘purpose’, i.e. exploring the range of rationales for studying a subject, has in helping white trainee teachers embrace cultural and ethnic diversity within their teaching. Through ‘purpose’ trainees explored different reasons why history should be taught (and by implication what content should be taught and how it should be taught) and the relationship of these reasons to diversity. Focusing on ‘purpose’ appears to have a positive impact on many trainees from white, mono-ethnic backgrounds, enabling them to bring diversity into the school curriculum, in this case history teaching. It offers one way to counter concerns about issues of ‘whiteness’ in the teaching profession and by teaching a more relevant curriculum has a potential positive impact on the achievement of students from minority ethnic backgrounds.

Detecting defects in UK new-build housing: a learning perspective

House builders play a key role in controlling the quality of new homes in the UK. The UK house building sector is, however, currently facing pressures to expand supply as well as conform to tougher low carbon planning and Building Regulation requirements; primarily in the areas of sustainability. There is growing evidence that the pressure the UK house building industry is currently under may be eroding build quality and causing an increase in defects. It is found that the prevailing defect literature is limited to the causes, pathology and statistical analysis of defects (and failures). The literature does not extend to examine how house builders individually and collectively, in practice, collect and learn from defects experience in order to reduce the prevalence of defects in future homes. The theoretical lens for the research is organisational learning. This paper contributes to our understanding of organisational learning in construction through a synthesis of current literature. Further, a suitable organisational learning model is adopted. The paper concludes by reporting the research design of an ongoing collaborative action research project with the National House Building Council (NHBC), focused on developing a better understanding of house builders’ localised defects analysis procedures and learning processes.

Participatory urban planning for climate change adaptation in coastal cities: lessons from a pilot experience in Maputo, Mozambique

This paper proposes a rights-based approach for participatory urban planning for climate change adaptation in urban areas. Participatory urban planning ties climate change adaptation to local development opportunities. Previous discussions suggest that participatory urban planning may help to understand structural inequalities, to gain, even if temporally, institutional support and to deliver a planning process in constant negotiation with local actors. Building upon an action research project which implemented a process of participatory urban planning for climate change in Maputo, Mozambique, this paper reflects upon the practical lessons that emerged from these experiences, in relation to the incorporation of climate change information, the difficulties to secure continued support from local governments and the opportunities for local impacts through the implementation of the proposals emerging from this process.

Achieving and evidencing research 'impact'? Tensions and dilemmas from an ethic of care perspective

While many academics are sceptical about the 'impact agenda', it may offer the potential to re-value feminist and participatory approaches to the co-production of knowledge. Drawing on my experiences of developing a UK Research Excellence Framework (REF) impact case study based on research on young caregiving in the UK, Tanzania and Uganda, I explore the dilemmas and tensions of balancing an ethic of care and participatory praxis with research management demands to evidence 'impact' in the neoliberal academy. The participatory dissemination process enabled young people to identify their support needs, which translated into policy and practice recommendations and in turn, produced 'impact'. It also revealed a paradox of action-oriented research: this approach may bring greater emotional investment of the participants in the project in potentially negative as well as positive ways, resulting in disenchantment that the research did not lead to tangible outcomes at local level. Participatory praxis may also pose ethical dilemmas for researchers who have responsibilities to care for both 'proximate' and 'distant' others. The 'more than research' relationship I developed with practitioners was motivated by my ethic of care rather than by the demands of the audit culture. Furthermore, my research and the impacts cited emerged slowly and incrementally from a series of small grants in an unplanned, serendipitous way at different scales, which may be difficult to fit within institutional audits of 'impact'. Given the growing pressures on academics, it seems ever more important to embody an ethic of care in university settings, as well as in the 'field'. We need to join the call for 'slow scholarship' and advocate a re-valuing of feminist and participatory action research approaches, which may have most impact at local level, in order to achieve meaningful shifts in the impact agenda and more broadly, the academy.

Bioremediation of acid mine drainage: an introduction to the Wheal Jane wetlands project

Acid mine drainage (AMD) is a widespread environmental problem associated with both working and abandoned mining operations. As part of an overall strategy to determine a long-term treatment option for AMD, a pilot passive treatment plant was constructed in 1994 at Wheat Jane Mine in Cornwall, UK. The plant consists of three separate systems; each containing aerobic reed beds, anaerobic cell and rock filters, and represents the largest European experimental facility of its kind. The systems only differ by the type of pre-treatment utilised to increase the pH of the influent minewater (pH<4): lime-dosed (LD), anoxic limestone drain (ALD) and lime free (LF), which receives no form of pre-treatment. The Wheal Jane pilot plant offered a unique facility and a major research project was established to evaluate the pilot plant and study in detail the biological mechanisms and the geochemical and physical processes that control passive treatment systems. The project has led to data, knowledge, models and design criteria for the future design, planning and sustainable management of passive treatment systems. A multidisciplinary team of scientists and managers from the U.K. universities, the Environment Agency and the Mining Industry has been put together to obtain the maximum advantage from the excellent facilities facility at Wheal Jane. (C) 2004 Elseaier B.V All rights reserved.

LiDAR mapping of tidal marshes for ecogeomorphological modelling in the TIDE project

The European research project TIDE (Tidal Inlets Dynamics and Environment) is developing and validating coupled models describing the morphological, biological and ecological evolution of tidal environments. The interactions between the physical and biological processes occurring in these regions requires that the system be studied as a whole rather than as separate parts. Extensive use of remote sensing including LiDAR is being made to provide validation data for the modelling. This paper describes the different uses of LiDAR within the project and their relevance to the TIDE science objectives. LiDAR data have been acquired from three different environments, the Venice Lagoon in Italy, Morecambe Bay in England, and the Eden estuary in Scotland. LiDAR accuracy at each site has been evaluated using ground reference data acquired with differential GPS. A semi-automatic technique has been developed to extract tidal channel networks from LiDAR data either used alone or fused with aerial photography. While the resulting networks may require some correction, the procedure does allow network extraction over large areas using objective criteria and reduces fieldwork requirements. The networks extracted may subsequently be used in geomorphological analyses, for example to describe the drainage patterns induced by networks and to examine the rate of change of networks. Estimation of the heights of the low and sparse vegetation on marshes is being investigated by analysis of the statistical distribution of the measured LiDAR heights. Species having different mean heights may be separated using the first-order moments of the height distribution.

The experiences and priorities of young people who care for their siblings in Tanzania and Uganda

This report presents key findings from a small-scale pilot research project that explored the experiences and priorities of young people caring for their siblings in sibling-headed households affected by AIDS in Tanzania and Uganda. Qualitative and participatory research was conducted with 33 young people living in sibling-headed households and 39 NGO staff and community members in rural and urban areas of Tanzania and Uganda. The report analyses the ways that young people manage transitions to caring for their younger siblings following their parents’ death and the impacts of caring on their family relations, education, emotional wellbeing and health, social lives and their transitions to adulthood. The study highlights gendered- and age-related differences in the nature and extent of young people’s care work and discusses young people’s needs and priorities for action, based on the views of young people, NGO staff and community members. Meeting the basic needs of young people living in sibling-headed households, listening to young people’s views, fostering peer support and relationships of trust with supportive adults, raising awareness and advocacy emerge as key priorities to safeguard the rights of children and young people living in sibling-headed households and challenge the stigma and marginalisation they sometimes face.