Stubs versus swabs? A comparison of gunshot residue collection techniques

The collection efficiency of two widely used gunshot residue (GSR) collection techniques—carbon-coated adhesive stubs and alcohol swabs—has been compared by counting the number of characteristic GSR particles collected from the firing hand of a shooter after firing one round. Samples were analyzed with both scanning electron microscopy and energy dispersive X-rays by an experienced GSR analyst, and the number of particles on each sample containing Pb, Ba, and Sb counted. The adhesive stubs showed a greater collection efficiency as all 24 samples gave positive results for GSR particles whereas the swabs gave only positive results for half of the 24 samples. Results showed a statistically significant collection efficiency for the stub collection method and likely reasons for this are considered.

Plastic films for polytunnels can prolong the effective residual life of cypermethrin to over 6 months

Synthetic pyrethroid insecticides are degraded almost entirely by ultraviolet (UV)-catalysed oxidation. A bioassay using the beetle Tribolium confusum duVal caged on bandages soaked in 0.04% a.i. cypermethrin showed large differences in residual insecticide-life under three plastic films available for cladding polytunnels. Cypermethrin exposed to a UV film that transmitted 70% of UVB and 80% of UVA killed all beetles for 8 weeks, compared to only 3 weeks for cypermethrin exposed in a clear plastic envelope. Cypermethrin under a UV-absorbing film that reduced the transmission of UVB and UVA to 14% and 50%, respectively, gave a complete kill for 17 weeks. Reducing the transmission of UVB to virtually zero, and that of UVA to only 3%, using a UV-opaque film prolonged the effective life of the cypermethrin residue to 26 weeks, and some beetles were still killed for a further 11 weeks. Even after this time, beetles exposed to cypermethrin from the UV-opaque treatment were still affected by the insecticide, and only showed near-normal mobility after 24 months of pesticide exposure to the UV-opaque film. These results have implications for the recommended intervals between cypermethrin treatment and crop harvest, and on the time of introduction of insect-based biological control agents, when UV-opaque films are used in commercial horticulture.

The impact of an insecticide on insect flower visitation and pollination in an agricultural landscape

1 Pesticides are considered a threat to pollinators but little is known about the potential impacts of their widespread use on pollinators. Less still is known about the impacts on pollination, comprising the ecosystem service that pollinators provide to wildflowers and crops. 2 The present study measured flower visitation and pollination in an agricultural landscape, by placing potted flowering plants (Petunia sp.) in vine fields sprayed with a highly toxic insecticide (fenitrothion). During two sampling rounds, insect visitors to the petunias were observed and measures of pollination were recorded by counting and weighing seeds. 3 In the earlier sampling round, a lower species richness of insect visitors was observed in fields that had received an early application of insecticide. No negative impacts were found from later applications. The results obtained suggest a greater potential harm to insect pollinators and flower visitation as a result of insecticide application early in the season. 4 No reduction in pollination was found in fields that received an early insecticide application. Pollination was greater with two insecticide applications between sampling rounds rather than one application. 5 In the present study system, insecticide application had a negative effect on pollinators but a possible positive effect on pollination services. In some cases, it may be that actions for conserving biodiversity will not benefit pollination services to all plants.

Legume type and temperature effects on the toxicity of insecticide to the genus Callosobruchus (Coleoptera: Bruchidae)

Three bruchid pest species, Callosobruchus maculatus, Callosobruchus chinensis and Callosobruchus rhodesianus, were studied for their response to insecticide toxicity taking into account the separate and interactive effects of temperature and pre-adult food. The food types used were cowpea (Vigna unguiculata) and mungbean (Vigna radiata). Callosobruchus maculatus was the most tolerant to malathion and the least affected by temperature change while C. rhodesianus was the least tolerant. Over a 4 C range (23, 25, 27 C), there was generally a significant impact of temperature on the tolerance of the three species to the insecticide. The food type on which the insects developed influenced considerably the degree of insecticide tolerance. Callosobruchus maculatus and C. chinensis populations reared onmungbean had higher tolerance to malathion than their counterparts reared on cowpea, but the opposite was observed in C. rhodesianus populations. The food influence in this study suggested an ancestral cause or fitness cost depending on the species. The interaction of food-by-temperature had no significant effect on malathion toxicity to this genus. Correlation analysis showed C. chinensis to be relatively less sensitive to insecticide concentration over the range studied compared with the other two species.

Synergistic effects of geographical strain, temperature and larval food on insecticide tolerance in Callosobruchus maculatus (F.)

This study investigated the multifactorial interaction of various environmental factors including 17 geographical strain (Brazil, Cameroon and Yemen strains), temperature, dose and larval food 18 (cowpea and mungbean) on the response of Callosobruchus maculatus adult to insecticide. All 19 the main factors, their two-way interactions and the four-way interaction had significant effects 20 on C. maculatus response to malathion (an organophosphate insecticide). However, the three-21 way interactions were not statistically significant (except strain x food x dose, P = 0.002). The 22 2 Brazil strain was the most responsive to temperature irrespective of the larval food type. The 23 impact of food type differs from one strain to the other, for instance, the food that imparts higher 24 tolerance in a strain might reduce the tolerance in another. Likewise, the hierarchy of tolerance 25 among the cowpea-reared strains (Brazil > Cameroon > Yemen) was totally different from the 26 mungbean-reared strains (Cameroon > Yemen > Brazil). The reasons for these differences were 27 discussed in the light of their impact on C. maculatus management. The management of both C. 28 maculatus and development of resistance could be complex, hence, the states of a variety of 29 environmental factors need to be considered. This is necessary in order to maximize management 30 success of this bruchid especially in tropical/subtropical developing countries.

Variation in the sensitivity of Callosobruchus (Coleoptera: Bruchidae) acetylcholinesterase to the organophosphate insecticide malaoxon: effect of species, geographical strain and food type

BACKGROUND: Bruchid beetles, Callosobruchus species, are serious pests of economically important grain legumes; their activity in stores is often controlled by use of synthetic insecticides. Esterases are known to be involved in insecticide resistance in insects. However, there is dearth of information on esterase activity in the genus Callosobruchus. In this study we investigated the effect of species, geographical strain and food type on the variation of acetylcholinesterase (AChE) activity and its inhibition by malaoxon (malathion metabolite) using an in vitro spectrophotometric method. RESULT: AChE activity varied significantly among species and strains and also among legume type used for rearing them. Generally irrespective of species, strain or food type, the higher the AChE activity of a population, the higher its inhibition by malaoxon. C. chinensis had the highest AChE activity of the species studied and in the presence of malaoxon it had the lowest remaining AChE activity, while C. rhodesianus retained the highest activity. CONCLUSION: A firsthand knowledge of AChE activity in regional Callosobruchus in line with the prevailing food types should be of utmost importance to grain legume breeders, researchers on plant materials for bruchid control and pesticide manufacturer/applicators for a robust integrated management of these bruchids.

FunFOLDQA: a quality assessment tool for protein-ligand binding site residue predictions

The estimation of prediction quality is important because without quality measures, it is difficult to determine the usefulness of a prediction. Currently, methods for ligand binding site residue predictions are assessed in the function prediction category of the biennial Critical Assessment of Techniques for Protein Structure Prediction (CASP) experiment, utilizing the Matthews Correlation Coefficient (MCC) and Binding-site Distance Test (BDT) metrics. However, the assessment of ligand binding site predictions using such metrics requires the availability of solved structures with bound ligands. Thus, we have developed a ligand binding site quality assessment tool, FunFOLDQA, which utilizes protein feature analysis to predict ligand binding site quality prior to the experimental solution of the protein structures and their ligand interactions. The FunFOLDQA feature scores were combined using: simple linear combinations, multiple linear regression and a neural network. The neural network produced significantly better results for correlations to both the MCC and BDT scores, according to Kendall’s τ, Spearman’s ρ and Pearson’s r correlation coefficients, when tested on both the CASP8 and CASP9 datasets. The neural network also produced the largest Area Under the Curve score (AUC) when Receiver Operator Characteristic (ROC) analysis was undertaken for the CASP8 dataset. Furthermore, the FunFOLDQA algorithm incorporating the neural network, is shown to add value to FunFOLD, when both methods are employed in combination. This results in a statistically significant improvement over all of the best server methods, the FunFOLD method (6.43%), and one of the top manual groups (FN293) tested on the CASP8 dataset. The FunFOLDQA method was also found to be competitive with the top server methods when tested on the CASP9 dataset. To the best of our knowledge, FunFOLDQA is the first attempt to develop a method that can be used to assess ligand binding site prediction quality, in the absence of experimental data.

Local orientational disorder in peptide fibrils probed by a combination of residue-specific 13C-18O labelling, polarised infrared spectroscopy and molecular combing

A novel combination of site-specific isotope labelling, polarised infrared spectroscopy and molecular combing reveal local orientational ordering in the fibril-forming peptide YTIAALLSPYSGGRADS. Use of 13C-18O labelled alanine residues demonstrates that the Nterminal end of the peptide is incorporated into the cross-beta structure, while the C-terminal end shows orientational disorder

Sublethal neonicotinoid insecticide exposure reduces solitary bee reproductive success

1. Pollinating insects provide crucial and economically important ecosystem services to crops and wild plants, but pollinators, particularly bees, are globally declining as a result of various driving factors, including the prevalent use of pesticides for crop protection. Sublethal pesticide exposure negatively impacts numerous pollinator lifehistory traits, but its influence on reproductive success remains largely unknown. Such information is pivotal, however, to our understanding of the long-term effects on population dynamics. 2 We investigated the influence of field-realistic trace residues of the routinely used neonicotinoid insecticides thiamethoxam and clothianidin in nectar substitutes on the entire life-time fitness performance of the red mason bee Osmia bicornis. 3 We show that chronic, dietary neonicotinoid exposure has severe detrimental effects on solitary bee reproductive output. Neonicotinoids did not affect adult bee mortality; however, monitoring of fully controlled experimental populations revealed that sublethal exposure resulted in almost 50% reduced total offspring production and a significantly male-biased offspring sex ratio. 4 Our data add to the accumulating evidence indicating that sublethal neonicotinoid effects on non-Apis pollinators are expressed most strongly in a rather complex, fitness-related context. Consequently, to fully mitigate long-term impacts on pollinator population dynamics, present pesticide risk assessments need to be expanded to include whole life-cycle fitness estimates, as demonstrated in the present study using O. bicornis as a model.

Poor survival on an artificial diet of two genotypes of the aphid Myzus persicae: a fitness cost of insecticide resistance?

A fully susceptible genotype (4106A) of Myzus persicae survived the longest on an artificial diet and, in several of the eight replicates, monitoring was terminated when the culture was still thriving. A genotype with elevated carboxylesterase FE4 at the R3 level (800F) had a mean survival of only 98.13 days, whereas 794J, which combines R3 E4 carboxylesterase with target-site resistance (knockdown resistance), survived for the even shorter mean time of 84.38 days. The poorer survival of the two genotypes with extremely elevated carboxylesterase-resistance was not the result of a reluctance to transfer to new diet at each diet change. Although available for only two replicates, a revertant clone of 794J (794Jrev), which has the same genotype as 794J but the amplified E4 genes are not expressed leading to a fully susceptible phenotype, did not appear to survive any better than this clone. This suggests that the poor survival on an artificial diet of the extreme-carboxylesterase genotypes is not the result of the cost of over-producing the enzyme. The frequency of insecticide-resistant genotypes is low in the population until insecticide is applied, indicating that they have reduced fitness, although this does not necessarily reflect a direct cost of expressing the resistance mechanism.

Peptide based hydrogels for cancer drug release: modulation of stiffness, drug release and proteolytic stability of hydrogels by incorporating D-amino acid residue(s)

Synthetic tripeptide based noncytotoxic hydrogelators have been discovered for releasing an anticancer drug at physiological pH and temparature. Interestingly, gel stiffness, drug release capacity and proteolytic stability of these hydrogels have been successfully modulated by incorporating D-amino acid residues, indicating their potential use for drug delivery in the future.