On the use of principal components in contemporany population genetics: a case study

In human Population Genetics, routine applications of principal component techniques are often required. Population biologists make widespread use of certain discrete classifications of human samples into haplotypes, the monophyletic units of phylogenetic trees constructed from several single nucleotide bimorphisms hierarchically ordered. Compositional frequencies of the haplotypes are recorded within the different samples. Principal component techniques are then required as a dimension-reducing strategy to bring the dimension of the problem to a manageable level, say two, to allow for graphical analysis. Population biologists at large are not aware of the special features of compositional data and normally make use of the crude covariance of compositional relative frequencies to construct principal components. In this short note we present our experience with using traditional linear principal components or compositional principal components based on logratios, with reference to a specific dataset

Interpretation of wind components as compositional variables

The classical statistical study of the wind speed in the atmospheric surface layer is made generally from the analysis of the three habitual components that perform the wind data, that is, the component W-E, the component S-N and the vertical component, considering these components independent. When the goal of the study of these data is the Aeolian energy, so is when wind is studied from an energetic point of view and the squares of wind components can be considered as compositional variables. To do so, each component has to be divided by the module of the corresponding vector. In this work the theoretical analysis of the components of the wind as compositional data is presented and also the conclusions that can be obtained from the point of view of the practical applications as well as those that can be derived from the application of this technique in different conditions of weather

Regression analysis of compositional data when both the dependent variable and independent variable are components

It is well known that regression analyses involving compositional data need special attention because the data are not of full rank. For a regression analysis where both the dependent and independent variable are components we propose a transformation of the components emphasizing their role as dependent and independent variables. A simple linear regression can be performed on the transformed components. The regression line can be depicted in a ternary diagram facilitating the interpretation of the analysis in terms of components. An exemple with time-budgets illustrates the method and the graphical features

Millora aerodinàmica de la nova carrosseria del vehicle l'Àliga. Estudis dels efectes de la rugositat i l'inserció d'apèndixs aerodinàmics

L' objectiu d' aquest estudi és intentar millorar l' aerodinàmica de la nova carrosseria del vehicle de baix consum de la UdG,l' Àliga, a través de programes informàtics de CFD. Des de fa uns anys l' Escola Politècnica Superior de la Universitat de Girona participa a l' Eco Shell Marathon, mirant d' assolir els millors resultats possibles.El nom del vehicle utilitzat per aquesta carrera és l' Àliga. Aquest projecte parteix dels resultats obtinguts al Projece fi de carrera d' en Daniel Vilavedra Vilà (2006):"Redisseny aerodinàmic de la carrosseria del vehicle de baix consum Àliga"

Estudi i simulació aerodinàmica amb programari de dinàmica de fluids computacional (CFD) en un model bàsic de vehicle de competició de la categoria CM (curses de muntanya)

Aquest projecte té com a objectiu la simulació numérica de la carrosseria d’ un vehicle de curses de muntanya de categoria CM

Disseny d’un remolc amb eixos abatibles destinat a activitats ambulants

Disseny d’un remolc de categoria O2,homologable per circular pe les vies públiques, i adaptat a les especificitats de les activitats de venda ambulant. El present projecte neix de la necessitat dels firaires i marxants disposar d’un espai de treball mòbil, el més similar possible als establiments fixes. El fet diferencial d’aquest vehicle consisteix en la seva capacitat per deixar la seva carrosseria al nivell del terra, facilitant el contacte entre client i venedor. El remolc està definit per un xassís format a partir de perfilaria d’acer i que consistirà la base del vehicle. Sobre el xassís es muntaran uns eixos abatibles accionats amb uns sistema hidràulic, i que permeten deixar la carrosseria al nivell del terra. Es fa la selecció també dels dispositius necessaris per a la seva homologació, com són els sistemes d’acoblament al vehicle tractor, de frenat i de direcció. La carrosseria muntada damunt del xassís consistirà en una caixa tancada construïda a partir de panells, perfils i tancaments comercials. El present projecte abasta el disseny i la selecció de components comercials, exceptuant els sistemes hidràulic i elèctric, dels que se’n defineixen només les necessitats

Lluís Oliver i els components fonamentals de la matèria

Entrevista en Lluís Oliver, químic gironí

An approach to vision-based station keeping for an unmanned underwater vehicle

This paper presents an automatic vision-based system for UUV station keeping. The vehicle is equipped with a down-looking camera, which provides images of the sea-floor. The station keeping system is based on a feature-based motion detection algorithm, which exploits standard correlation and explicit textural analysis to solve the correspondence problem. A visual map of the area surveyed by the vehicle is constructed to increase the flexibility of the system, allowing the vehicle to position itself when it has lost the reference image. The testing platform is the URIS underwater vehicle. Experimental results demonstrating the behavior of the system on a real environment are presented

Autonomous underwater vehicle control using reinforcement learning policy search methods

Autonomous underwater vehicles (AUV) represent a challenging control problem with complex, noisy, dynamics. Nowadays, not only the continuous scientific advances in underwater robotics but the increasing number of subsea missions and its complexity ask for an automatization of submarine processes. This paper proposes a high-level control system for solving the action selection problem of an autonomous robot. The system is characterized by the use of reinforcement learning direct policy search methods (RLDPS) for learning the internal state/action mapping of some behaviors. We demonstrate its feasibility with simulated experiments using the model of our underwater robot URIS in a target following task

Positioning an underwater vehicle through image mosaicking

Mosaics have been commonly used as visual maps for undersea exploration and navigation. The position and orientation of an underwater vehicle can be calculated by integrating the apparent motion of the images which form the mosaic. A feature-based mosaicking method is proposed in this paper. The creation of the mosaic is accomplished in four stages: feature selection and matching, detection of points describing the dominant motion, homography computation and mosaic construction. In this work we demonstrate that the use of color and textures as discriminative properties of the image can improve, to a large extent, the accuracy of the constructed mosaic. The system is able to provide 3D metric information concerning the vehicle motion using the knowledge of the intrinsic parameters of the camera while integrating the measurements of an ultrasonic sensor. The experimental results of real images have been tested on the GARBI underwater vehicle

A review of sensor fusion techniques for underwater vehicle navigation

This work provides a general description of the multi sensor data fusion concept, along with a new classification of currently used sensor fusion techniques for unmanned underwater vehicles (UUV). Unlike previous proposals that focus the classification on the sensors involved in the fusion, we propose a synthetic approach that is focused on the techniques involved in the fusion and their applications in UUV navigation. We believe that our approach is better oriented towards the development of sensor fusion systems, since a sensor fusion architecture should be first of all focused on its goals and then on the fused sensors

Adding new components to the knowledge plane GMPLS over WDM networks

A recent study defines a new network plane: the knowledge plane. The incorporation of the knowledge plane over the network allows having more accurate information of the current and future network states. In this paper, the introduction and management of the network reliability information in the knowledge plane is proposed in order to improve the quality of service with protection routing algorithms in GMPLS over WDM networks. Different experiments prove the efficiency and scalability of the proposed scheme in terms of the percentage of resources used to protect the network

Estudi del model dinàmic d’un robot submarí d’intervenció (IAUV) composat per un vehicle i un braç manipulador

Fins a la data d’avui, el grup VICOROB de la Universitat de Girona ha desenvolupat diversos vehicles autònoms (GARBÍ, URIS i ICTINEU). El projecte que comença aquest any té com objectiu desenvolupar un nou vehicle submarí autònom amb capacitat d’intervenció (I-AUV) gràcies a un braç manipulador. Aquest projecte final de carrera té com objectiu desenvolupar en entorn MATLAB un simulador d’un I-AUV, format per un AUV i un braç manipulador de n graus de llibertat per tal d’avaluar les reaccions dels moviments del braç, amb càrrega i sense, sobre el robot, i viceversa

I-SS: integrated supervision systems approach based on interactive components

Process supervision is the activity focused on monitoring the process operation in order to deduce conditions to maintain the normality including when faults are present Depending on the number/distribution/heterogeneity of variables, behaviour situations, sub-processes, etc. from processes, human operators and engineers do not easily manipulate the information. This leads to the necessity of automation of supervision activities. Nevertheless, the difficulty to deal with the information complicates the design and development of software applications. We present an approach called "integrated supervision systems". It proposes multiple supervisors coordination to supervise multiple sub-processes whose interactions permit one to supervise the global process

Diagnosing Patients Combining Principal Components Analysis and Case Based Reasoning

This paper addresses the application of a PCA analysis on categorical data prior to diagnose a patients data set using a Case-Based Reasoning (CBR) system. The particularity is that the standard PCA techniques are designed to deal with numerical attributes, but our medical data set contains many categorical data and alternative methods as RS-PCA are required. Thus, we propose to hybridize RS-PCA (Regular Simplex PCA) and a simple CBR. Results show how the hybrid system produces similar results when diagnosing a medical data set, that the ones obtained when using the original attributes. These results are quite promising since they allow to diagnose with less computation effort and memory storage