Nonpoint source pollution, space, time and asymetric information - a deposit refund approach

The incorporation of space allows the establishment of a more precise relationship between a contaminating input, a contaminating byproduct and emissions that reach the final receptor. However, the presence of asymmetric information impedes the implementation of the first-best policy. As a solution to this problem a site specific deposit refund system for the contaminating input and the contaminating byproduct are proposed. Moreover, the utilization of a successive optimization technique first over space and second over time enables definition of the optimal intertemporal site specific deposit refund system

Hilbert space on probability density functions with Aitchison geometry

Compositional data analysis motivated the introduction of a complete Euclidean structure in the simplex of D parts. This was based on the early work of J. Aitchison (1986) and completed recently when Aitchinson distance in the simplex was associated with an inner product and orthonormal bases were identified (Aitchison and others, 2002; Egozcue and others, 2003). A partition of the support of a random variable generates a composition by assigning the probability of each interval to a part of the composition. One can imagine that the partition can be refined and the probability density would represent a kind of continuous composition of probabilities in a simplex of infinitely many parts. This intuitive idea would lead to a Hilbert-space of probability densities by generalizing the Aitchison geometry for compositions in the simplex into the set probability densities

Hardy-Weinberg Equilibrium and the Ternary Plot

The Hardy-Weinberg law, formulated about 100 years ago, states that under certain assumptions, the three genotypes AA, AB and BB at a bi-allelic locus are expected to occur in the proportions p2, 2pq, and q2 respectively, where p is the allele frequency of A, and q = 1-p. There are many statistical tests being used to check whether empirical marker data obeys the Hardy-Weinberg principle. Among these are the classical xi-square test (with or without continuity correction), the likelihood ratio test, Fisher's Exact test, and exact tests in combination with Monte Carlo and Markov Chain algorithms. Tests for Hardy-Weinberg equilibrium (HWE) are numerical in nature, requiring the computation of a test statistic and a p-value. There is however, ample space for the use of graphics in HWE tests, in particular for the ternary plot. Nowadays, many genetical studies are using genetical markers known as Single Nucleotide Polymorphisms (SNPs). SNP data comes in the form of counts, but from the counts one typically computes genotype frequencies and allele frequencies. These frequencies satisfy the unit-sum constraint, and their analysis therefore falls within the realm of compositional data analysis (Aitchison, 1986). SNPs are usually bi-allelic, which implies that the genotype frequencies can be adequately represented in a ternary plot. Compositions that are in exact HWE describe a parabola in the ternary plot. Compositions for which HWE cannot be rejected in a statistical test are typically “close" to the parabola, whereas compositions that differ significantly from HWE are “far". By rewriting the statistics used to test for HWE in terms of heterozygote frequencies, acceptance regions for HWE can be obtained that can be depicted in the ternary plot. This way, compositions can be tested for HWE purely on the basis of their position in the ternary plot (Graffelman & Morales, 2008). This leads to nice graphical representations where large numbers of SNPs can be tested for HWE in a single graph. Several examples of graphical tests for HWE (implemented in R software), will be shown, using SNP data from different human populations

Vertebrates Limb Geometry in the Simplex space

A novel metric comparison of the appendicular skeleton (fore and hind limb) of different vertebrates using the Compositional Data Analysis (CDA) methodological approach it’s presented. 355 specimens belonging in various taxa of Dinosauria (Sauropodomorpha, Theropoda, Ornithischia and Aves) and Mammalia (Prothotheria, Metatheria and Eutheria) were analyzed with CDA. A special focus has been put on Sauropodomorpha dinosaurs and the Aitchinson distance has been used as a measure of disparity in limb elements proportions to infer some aspects of functional morphology

Improving Label Space Usage for Ethernet Label Switched Paths

Ethernet is becoming the dominant aggregation technology for carrier transport networks; however, as it is a LAN technology, native bridged ethernet does not fulfill all the carrier requirements. One of the schemes proposed by the research community to make ethernet fulfill carrier requirements is ethernet VLAN-label switching (ELS). ELS allows the creation of label switched data paths using a 12-bit label encoded in the VLAN TAG control information field. Previous label switching technologies such as MPLS use more bits for encoding the label. Hence, they do not suffer from label sparsity issues as ELS might. This paper studies the sparsity issues resulting from the reduced ELS VLAN-label space and proposes the use of the label merging technique to improve label space usage. Experimental results show that label merging considerably improves label space usage

Asymmetric tunnels in P2MP LSPs as a label space reduction method

The objective of traffic engineering is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization, few works have focused on LSR (label switched router) label space. This paper proposes an algorithm that takes advantage of the MPLS label stack features in order to reduce the number of labels used in LSPs. Some tunnelling methods and their MPLS implementation drawbacks are also discussed. The described algorithm sets up NHLFE (next hop label forwarding entry) tables in each LSR, creating asymmetric tunnels when possible. Experimental results show that the described algorithm achieves a great reduction factor in the label space. The presented works apply for both types of connections: P2MP (point-to-multipoint) and P2P (point-to-point)

A Label space reduction algorithm for P2MP LSPs using asymmetric tunnels

The aim of traffic engineering is to optimise network resource utilization. Although several works on minimizing network resource utilization have been published, few works have focused on LSR label space. This paper proposes an algorithm that uses MPLS label stack features in order to reduce the number of labels used in LSPs forwarding. Some tunnelling methods and their MPLS implementation drawbacks are also discussed. The algorithm described sets up the NHLFE tables in each LSR, creating asymmetric tunnels when possible. Experimental results show that the algorithm achieves a large reduction factor in the label space. The work presented here applies for both types of connections: P2MP and P2P

Full label space reduction in MPLS networks: asymmetric merged tunneling

Traffic Engineering objective is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization in MPLS networks, few of them have been focused in LSR label space reduction. This letter studies Asymmetric Merged Tunneling (AMT) as a new method for reducing the label space in MPLS network. The proposed method may be regarded as a combination of label merging (proposed in the MPLS architecture) and asymmetric tunneling (proposed recently in our previous works). Finally, simulation results are performed by comparing AMT with both ancestors. They show a great improvement in the label space reduction factor

Label Space Reduction in MPLS Networks: How Much Can A Single Stacked Label Do?

Most network operators have considered reducing LSR label spaces (number of labels used) as a way of simplifying management of underlaying virtual private networks (VPNs) and therefore reducing operational expenditure (OPEX). The IETF outlined the label merging feature in MPLS-allowing the configuration of multipoint-to-point connections (MP2P)-as a means of reducing label space in LSRs. We found two main drawbacks in this label space reduction a)it should be separately applied to a set of LSPs with the same egress LSR-which decreases the options for better reductions, and b)LSRs close to the edge of the network experience a greater label space reduction than those close to the core. The later implies that MP2P connections reduce the number of labels asymmetrically

Fault diagnosis by refining the parameter uncertainty space of nonlinear dynamic systems

This paper deals with fault detection and isolation problems for nonlinear dynamic systems. Both problems are stated as constraint satisfaction problems (CSP) and solved using consistency techniques. The main contribution is the isolation method based on consistency techniques and uncertainty space refining of interval parameters. The major advantage of this method is that the isolation speed is fast even taking into account uncertainty in parameters, measurements, and model errors. Interval calculations bring independence from the assumption of monotony considered by several approaches for fault isolation which are based on observers. An application to a well known alcoholic fermentation process model is presented

A new efficient approach to the direct restricted active space self-consistent field method

An implicitly parallel method for integral-block driven restricted active space self-consistent field (RASSCF) algorithms is presented. The approach is based on a model space representation of the RAS active orbitals with an efficient expansion of the model subspaces. The applicability of the method is demonstrated with a RASSCF investigation of the first two excited states of indole

One- and two-center physical space partitioning of the energy in the density functional theory

A conceptually new approach is introduced for the decomposition of the molecular energy calculated at the density functional theory level of theory into sum of one- and two-atomic energy components, and is realized in the "fuzzy atoms" framework. (Fuzzy atoms mean that the three-dimensional physical space is divided into atomic regions having no sharp boundaries but exhibiting a continuous transition from one to another.) The new scheme uses the new concept of "bond order density" to calculate the diatomic exchange energy components and gives them unexpectedly close to the values calculated by the exact (Hartree-Fock) exchange for the same Kohn-Sham orbitals

Anisotropic dispersion, space competition, and the slowdown of the Neolithic transition

The front speed of the Neolithic (farmer) spread in Europe decreased as it reached Northern latitudes, where the Mesolithic (huntergatherer) population density was higher. Here, we describe a reaction diffusion model with (i) an anisotropic dispersion kernel depending on the Mesolithic population density gradient and (ii) a modified population growth equation. Both effects are related to the space available for the Neolithic population. The model is able to explain the slowdown of the Neolithic front as observed from archaeological data

Label space reduction in GMPLs and All-Optical Label Swapping networks

All-Optical Label Swapping (AOLS) es una tecnología clave para la implementación de nodos de conmutación completamente óptica de paquetes. Sin embargo, el costo de su desarrollo es proporcional al tamaño del espacio de etiquetas (label space). Debido a que los principios de funcionamiento de AOLS son casos particulares de los del MultiProtocol Label Switching (MPLS), esta tesis estudia métodos generales, aplicables a ambos, con el propósito de reducir el espacio de etiquetas tanto como sea posible. Modelos de programación lineal entera y heurísticas son propuestos para el caso en el que se permite apilar una etiqueta extra. Encontramos que cerca del 50% del espacio de etiquetas puede ser reducido, si se permite colocar una etiqueta extra en la pila. Además, particularmente para AOLS, encontramos que se puede reducir el espacio de etiquetas cerca al 25% si se duplica la capacidad de los enlaces y se permite re-encaminar el tráfico.

Funcions densitat i semblança molecular quàntica: nous desenvolupaments i aplicacions

La present tesi, tot i que emmarcada dins de la teoria de les Mesures Semblança Molecular Quántica (MQSM), es deriva en tres àmbits clarament definits: - La creació de Contorns Moleculars de IsoDensitat Electrònica (MIDCOs, de l'anglès Molecular IsoDensity COntours) a partir de densitats electròniques ajustades. - El desenvolupament d'un mètode de sobreposició molecular, alternatiu a la regla de la màxima semblança. - Relacions Quantitatives Estructura-Activitat (QSAR, de l'anglès Quantitative Structure-Activity Relationships). L'objectiu en el camp dels MIDCOs és l'aplicació de funcions densitat ajustades, ideades inicialment per a abaratir els càlculs de MQSM, per a l'obtenció de MIDCOs. Així, es realitza un estudi gràfic comparatiu entre diferents funcions densitat ajustades a diferents bases amb densitats obtingudes de càlculs duts a terme a nivells ab initio. D'aquesta manera, l'analogia visual entre les funcions ajustades i les ab initio obtinguda en el ventall de representacions de densitat obtingudes, i juntament amb els valors de les mesures de semblança obtinguts prèviament, totalment comparables, fonamenta l'ús d'aquestes funcions ajustades. Més enllà del propòsit inicial, es van realitzar dos estudis complementaris a la simple representació de densitats, i són l'anàlisi de curvatura i l'extensió a macromolècules. La primera observació correspon a comprovar no només la semblança dels MIDCOs, sinó la coherència del seu comportament a nivell de curvatura, podent-se així observar punts d'inflexió en la representació de densitats i veure gràficament aquelles zones on la densitat és còncava o convexa. Aquest primer estudi revela que tant les densitats ajustades com les calculades a nivell ab initio es comporten de manera totalment anàloga. En la segona part d'aquest treball es va poder estendre el mètode a molècules més grans, de fins uns 2500 àtoms. Finalment, s'aplica part de la filosofia del MEDLA. Sabent que la densitat electrònica decau ràpidament al allunyar-se dels nuclis, el càlcul d'aquesta pot ser obviat a distàncies grans d'aquests. D'aquesta manera es va proposar particionar l'espai, i calcular tan sols les funcions ajustades de cada àtom tan sols en una regió petita, envoltant l'àtom en qüestió. Duent a terme aquest procés, es disminueix el temps de càlcul i el procés esdevé lineal amb nombre d'àtoms presents en la molècula tractada. En el tema dedicat a la sobreposició molecular es tracta la creació d'un algorisme, així com la seva implementació en forma de programa, batejat Topo-Geometrical Superposition Algorithm (TGSA), d'un mètode que proporcionés aquells alineaments que coincideixen amb la intuïció química. El resultat és un programa informàtic, codificat en Fortran 90, el qual alinea les molècules per parelles considerant tan sols nombres i distàncies atòmiques. La total absència de paràmetres teòrics permet desenvolupar un mètode de sobreposició molecular general, que proporcioni una sobreposició intuïtiva, i també de forma rellevant, de manera ràpida i amb poca intervenció de l'usuari. L'ús màxim del TGSA s'ha dedicat a calcular semblances per al seu ús posterior en QSAR, les quals majoritàriament no corresponen al valor que s'obtindria d'emprar la regla de la màxima semblança, sobretot si hi ha àtoms pesats en joc. Finalment, en l'últim tema, dedicat a la Semblança Quàntica en el marc del QSAR, es tracten tres aspectes diferents: - Ús de matrius de semblança. Aquí intervé l'anomenada matriu de semblança, calculada a partir de les semblances per parelles d'entre un conjunt de molècules. Aquesta matriu és emprada posteriorment, degudament tractada, com a font de descriptors moleculars per a estudis QSAR. Dins d'aquest àmbit s'han fet diversos estudis de correlació d'interès farmacològic, toxicològic, així com de diverses propietats físiques. - Aplicació de l'energia d'interacció electró-electró, assimilat com a una forma d'autosemblança. Aquesta modesta contribució consisteix breument en prendre el valor d'aquesta magnitud, i per analogia amb la notació de l'autosemblança molecular quàntica, assimilar-la com a cas particular de d'aquesta mesura. Aquesta energia d'interacció s'obté fàcilment a partir de programari mecanoquàntic, i esdevé ideal per a fer un primer estudi preliminar de correlació, on s'utilitza aquesta magnitud com a únic descriptor. - Càlcul d'autosemblances, on la densitat ha estat modificada per a augmentar el paper d'un substituent. Treballs previs amb densitats de fragments, tot i donar molt bons resultats, manquen de cert rigor conceptual en aïllar un fragment, suposadament responsable de l'activitat molecular, de la totalitat de l'estructura molecular, tot i que les densitats associades a aquest fragment ja difereixen degut a pertànyer a esquelets amb diferents substitucions. Un procediment per a omplir aquest buit que deixa la simple separació del fragment, considerant així la totalitat de la molècula (calcular-ne l'autosemblança), però evitant al mateix temps valors d'autosemblança no desitjats provocats per àtoms pesats, és l'ús de densitats de Forats de fermi, els quals es troben definits al voltant del fragment d'interès. Aquest procediment modifica la densitat de manera que es troba majoritàriament concentrada a la regió d'interès, però alhora permet obtenir una funció densitat, la qual es comporta matemàticament igual que la densitat electrònica regular, podent-se així incorporar dins del marc de la semblança molecular. Les autosemblances calculades amb aquesta metodologia han portat a bones correlacions amb àcids aromàtics substituïts, podent així donar una explicació al seu comportament. Des d'un altre punt de vista, també s'han fet contribucions conceptuals. S'ha implementat una nova mesura de semblança, la d'energia cinètica, la qual consisteix en prendre la recentment desenvolupada funció densitat d'energia cinètica, la qual al comportar-se matemàticament igual a les densitats electròniques regulars, s'ha incorporat en el marc de la semblança. A partir d'aquesta mesura s'han obtingut models QSAR satisfactoris per diferents conjunts moleculars. Dins de l'aspecte del tractament de les matrius de semblança s'ha implementat l'anomenada transformació estocàstica com a alternativa a l'ús de l'índex Carbó. Aquesta transformació de la matriu de semblança permet obtenir una nova matriu no simètrica, la qual pot ser posteriorment tractada per a construir models QSAR.