Implementación del modelo hidrológico de Témez para la evaluación de recursos hídricos con GRASS GIS: fase superficial y subterránea

Se presenta la implementación del modelo hidrológico distribuido de Témez sobre GRASS GIS. Este modelo se utiliza para la evaluación de recursos hídricos en régimen natural con paso mensual y para la totalidad del territorio español, tal como aparece en el Libro Blanco del Agua en España. A partir de las variables de entrada, precipitación y evapotranspiración potencial y los parámetros hidrológicos, el modelo obtiene los mapas de los distintos almacenamientos, humedad en el suelo y volumen de acuífero, y de las variables de salida del ciclo hidrológico, evapotranspiración y escorrentía total, obtenida esta última como suma de la escorrentía superficial y subterránea. El objetivo final del trabajo es la implementación de los componentes superficiales y subterráneos en el modelo hidrológico, desarrollando para ello un programa que hace funcional en GRASS GIS el modelo matemático en que se basa la evaluación de recursos hídricos

Geostatistics for constrained variables: positive data, compositions and probabilities. Applications to environmental hazard monitoring

Aquesta tesi estudia com estimar la distribució de les variables regionalitzades l'espai mostral i l'escala de les quals admeten una estructura d'espai Euclidià. Apliquem el principi del treball en coordenades: triem una base ortonormal, fem estadística sobre les coordenades de les dades, i apliquem els output a la base per tal de recuperar un resultat en el mateix espai original. Aplicant-ho a les variables regionalitzades, obtenim una aproximació única consistent, que generalitza les conegudes propietats de les tècniques de kriging a diversos espais mostrals: dades reals, positives o composicionals (vectors de components positives amb suma constant) són tractades com casos particulars. D'aquesta manera, es generalitza la geostadística lineal, i s'ofereix solucions a coneguts problemes de la no-lineal, tot adaptant la mesura i els criteris de representativitat (i.e., mitjanes) a les dades tractades. L'estimador per a dades positives coincideix amb una mitjana geomètrica ponderada, equivalent a l'estimació de la mediana, sense cap dels problemes del clàssic kriging lognormal. El cas composicional ofereix solucions equivalents, però a més permet estimar vectors de probabilitat multinomial. Amb una aproximació bayesiana preliminar, el kriging de composicions esdevé també una alternativa consistent al kriging indicador. Aquesta tècnica s'empra per estimar funcions de probabilitat de variables qualsevol, malgrat que sovint ofereix estimacions negatives, cosa que s'evita amb l'alternativa proposada. La utilitat d'aquest conjunt de tècniques es comprova estudiant la contaminació per amoníac a una estació de control automàtic de la qualitat de l'aigua de la conca de la Tordera, i es conclou que només fent servir les tècniques proposades hom pot detectar en quins instants l'amoni es transforma en amoníac en una concentració superior a la legalment permesa.

Interpretation of wind components as compositional variables

The classical statistical study of the wind speed in the atmospheric surface layer is made generally from the analysis of the three habitual components that perform the wind data, that is, the component W-E, the component S-N and the vertical component, considering these components independent. When the goal of the study of these data is the Aeolian energy, so is when wind is studied from an energetic point of view and the squares of wind components can be considered as compositional variables. To do so, each component has to be divided by the module of the corresponding vector. In this work the theoretical analysis of the components of the wind as compositional data is presented and also the conclusions that can be obtained from the point of view of the practical applications as well as those that can be derived from the application of this technique in different conditions of weather

CODAPACK3D. A new version of Compositional Data Package

The statistical analysis of compositional data should be treated using logratios of parts, which are difficult to use correctly in standard statistical packages. For this reason a freeware package, named CoDaPack was created. This software implements most of the basic statistical methods suitable for compositional data. In this paper we describe the new version of the package that now is called CoDaPack3D. It is developed in Visual Basic for applications (associated with Excel©), Visual Basic and Open GL, and it is oriented towards users with a minimum knowledge of computers with the aim at being simple and easy to use. This new version includes new graphical output in 2D and 3D. These outputs could be zoomed and, in 3D, rotated. Also a customization menu is included and outputs could be saved in jpeg format. Also this new version includes an interactive help and all dialog windows have been improved in order to facilitate its use. To use CoDaPack one has to access Excel© and introduce the data in a standard spreadsheet. These should be organized as a matrix where Excel© rows correspond to the observations and columns to the parts. The user executes macros that return numerical or graphical results. There are two kinds of numerical results: new variables and descriptive statistics, and both appear on the same sheet. Graphical output appears in independent windows. In the present version there are 8 menus, with a total of 38 submenus which, after some dialogue, directly call the corresponding macro. The dialogues ask the user to input variables and further parameters needed, as well as where to put these results. The web site http://ima.udg.es/CoDaPack contains this freeware package and only Microsoft Excel© under Microsoft Windows© is required to run the software. Kew words: Compositional data Analysis, Software

Sistema de información geográfica para web con informaciones espaciales (geográficas) de output y input para expediciones

This project is a Web Geographic Information System built on an Open Source geographic structure like MapServer (Minnesota University) and PostgreSQL/PostGIS (object relational database management system). The study case is a web site for expeditions in a specific Brazilian region

Revisió de la recerca educativa sobre les variables explicatives del rendiment acadèmic:Apunts per a l'ús del criteri de "modificabilitat pedagògica" de les variables.

La conceptualització del concepte de rendiment acadèmic ha variat al llarg de la història des de definicions que es basaven en un únic criteri fins a les més actuals concepcions multidimensionals. Aquestes darreres apareixen com a resultat del desenvolupament d'aquest concepte, paral.lel a l'evolució històrica d'un fenomen més ampli: el fracàs escolar

Temperamental Dimension and Anxiety Problems in a Clinical Sample of Three- to Six-year old Children: A Study of Variables

In the last few years, many researchers have studied the presence of common dimensions of temperament in subjects with symptoms of anxiety. The aim of this study is to examine the association between temperamental dimensions (high negative affect and activity level) and anxiety problems in clinical preschool children. A total of 38 children, ages 3 to 6 years, from the Infant and Adolescent Mental Health Center of Girona and the Center of Diagnosis and Early Attention of Sabadell and Olot were evaluated by parents and psychologists. Their parents completed several screening scales and, subsequently, clinical child psychopathology professionals carried out diagnostic interviews with children from the sample who presented signs of anxiety. Findings showed that children with high levels of negative affect and low activity level have pronounced symptoms of anxiety. However, children with anxiety disorders do not present different temperament styles from their peers without these pathologies

Empowerment: model i instrument de mesura basat en les variables primàries o efectives PIEQ (Primary Items Empowerment Questionnaire)

In this thesis a review of the state of the art on empowerment is found. A proposal is put forward for a model of the effective variables of empowerment, a new theoretical model that provides a distinct classification of individual variables. The model consists of four metavariables called reciprocal, unidirectional, shared and reflexive. Finally, a measurement tool for measuring and representing these variables graphically is described, including its process of elaboration through a preliminary pilot study that served to refine and improve the questionnaire. Both the model and the instrument proposed aim to determine the state of the primary variables involved in determining the predisposition and potential of a working group towards empowerment. With the measurement tool both organisational, departmental, working group and/or individual data can be obtained. This instrument can help companies and organisations to discover the limitations existing within a working group and act in consequence.

Contribució al coneixement de variables geoambientals en l'àmbit de la Costa Brava (Girona)

La tesi doctoral desenvolupada, emmarcada dins del camp de les Ciències Ambientals, aplica la Geologia Ambiental orientada al coneixement dels processos i recursos geològics de cara a la planificació i a l'ordenació del territori. Com a zona d'estudi s'ha seleccionat la Costa Brava meridional, concretament tota l'àrea litoral compresa per les conques hidrogràfiques de l'Aubi, riera de Calonge, Ridaura, riera de Tossa i riera de Lloret (75 km de línia de costa i una extensió de 291 km2). Aquest treball, amb l'aptitud integradora dels conceptes i mètodes propis de les Ciències Geològiques i Ambientals, s'ha proposat com a objectius globals l'anàlisi de la qualitat i del comportament físic i químic dels materials terrestres en front les accions humanes i de la seva utilització com a recursos; l'estudi dels processos naturals i de la influència que puguin tenir sobre l'home o bé els efectes que aquest pot causar sobre aquells, i per últim, com a derivació dels anteriors, el disseny i aplicació d'instruments de tipus preventiu en la gestió del territori; és a dir, la planificació dels usos del territori. Amb la filosofia de recerca basada en que els factor geològics són uns elements d'ajuda per a la visió integral d'un territori, s'han estudiat diferents variables geoambientals procurant traduir el coneixement del medi en informació apta per a la presa de decisions sobre l'ús i preservació d'aquest àmbit litoral. Els Sistemes d'Informació Geogràfica (SIG) han estat clau per a la visió sistèmica del territori, per a la integració de les diferents variables geoambientals, així com per a la producció cartogràfica temàtica i final. Pel que fa als processos geològics, lligats a la dinàmica fluviotorrencial, s'han cartografiat les principals àrees d'actuació així com analitzat els factors que inicien, afavoreixen o magnifiquen la seva ocurrència. S'han estudiat les accions denudatives, els processos de transport-sedimentació i amb l'estudi integrat d'aquests processos i formes resultants s'han identificat unitats territorials caracteritzades per un comportament geomòrfic uniforme. En quant a l'anàlisi dels recursos geològics s'ha aprofundit en el coneixement dels recursos hídrics subterranis, les roques industrials i els georecursos litorals. Pel que fa als primers s'ha centrat en la delimitació de les principals unitats i subunitats aqüíferes, així com en acotar les geometries i principals característiques hidràuliques. Pel que fa als àrids i roques de construcció l'objectiu fonamental ha estat la delimitació cartogràfica d'aquells materials que per les seves propietats fisicoquímiques són potencialment aptes per als usos indicats. Finalment s'ha fet una recerca orientada a l'estudi de factors que limiten o condicionen el potencial geoturístic d'aquesta àrea litoral, concretament en els penya-segats i les platges. Les principals aportacions d'aquesta tesi doctoral es poden emmarcar en l'àmbit regional i fenomenològic, aspectes clau en la gestió i planificació territorial. Pel que fa al primer, destaquem l'aportació de dades geoambientals a nivell cartogràfic en relació a variables litoestructurals, de processos dinàmics com de recursos geològics. Des del punt de vista de l'àmbit fenomenològic destaquem la interacció de les variables estudiades a nivell de conca hidrogràfica, com són, entre d'altres, les relacions existents entre les diferents formacions aqüíferes; la possible participació de les aigües subterrànies en la resposta hidrològica del sistema fluviotorrencial, o la problemàtica derivada de l'antropització de la sorra de la platja com a conseqüència d'abocaments de terres i residus inerts als marges de les rieres.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.