Integració d’un sistema de visió per computador a una cèl·lula flexible de transport

L’objectiu d’aquest projecte final de carrera és millorar les prestacions de la cel·la de fabricació actual duent a terme les següents fites: integració d’un sistema de visió artificial a la plataforma. Aquest sistema ha de permetre la detecció i anàlisi dels objectes transportats, augmentant les seves possibilitats de manipulació i classificació. Es pretén eliminar la restricció actual que obliga a col•locar les peces en una posició fixa de la safata de transport; control centralitzat del procés a través d’un ordinador. El procés serà operat a través d’un computador industrial, el qual controlarà els diferents sistemes que componen la cel·la per tal que duguin a terme les seves funcions de forma coordinada; disseny i implementació d’una API del sistema. Es desenvoluparà la llibreria de control del sistema per tal de facilitar la programació del procés

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

A mixed H2/H∞-based semiactive control for vibration mitigation in flexible structures

In this paper, we address this problem through the design of a semiactive controller based on the mixed H2/H∞ control theory. The vibrations caused by the seismic motions are mitigated by a semiactive damper installed in the bottom of the structure. It is meant by semiactive damper, a device that absorbs but cannot inject energy into the system. Sufficient conditions for the design of a desired control are given in terms of linear matrix inequalities (LMIs). A controller that guarantees asymptotic stability and a mixed H2/H∞ performance is then developed. An algorithm is proposed to handle the semiactive nature of the actuator. The performance of the controller is experimentally evaluated in a real-time hybrid testing facility that consists of a physical specimen (a small-scale magnetorheological damper) and a numerical model (a large-scale three-story building)

Destabilizing Mutations Alter the Hydrogen Exchange Mechanism in Ribonuclease A

The effect of strongly destabilizing mutations, I106A and V108G of Ribonuclease A (RNase A), on its structure and stability has been determined by NMR. The solution structures of these variants are essentially equivalent to RNase A. The exchange rates of the most protected amide protons in RNase A (35ºC), the I106A variant (35ºC), and the V108G variant (10ºC) yield stability values of 9.9, 6.0, and 6.8 kcal/mol, respectively, when analyzed assuming an EX2 exchange mechanism. Thus, the destabilization induced by these mutations is propagated throughout the protein. Simulation of RNase A hydrogen exchange indicates that the most protected protons in RNase A and the V108G variant exchange via the EX2 regime, whereas those of I106A exchange through a mixed EX1 1 EX2 process. It is striking that a single point mutation can alter the overall exchange mechanism. Thus, destabilizing mutations joins high temperatures, high pH and the presence of denaturating agents as a factor that induces EX1 exchange in proteins. The calculations also indicate a shift from the EX2 to the EX1 mechanism for less protected groups within the same protein. This should be borne in mind when interpreting exchange data as a measure of local stability in less protected regions

Pressure-jump-induced kinetics reveals a hydration dependent folding/unfolding mechanism of ribonuclease A

Pressure-jump (p-jump)-induced relaxation kinetics was used to explore the energy landscape of protein folding/unfolding of Y115W, a fluorescent variant of ribonuclease A. Pressure-jumps of 40MPa amplitude (5ms dead-time) were conducted both to higher (unfolding) and to lower (folding) pressure, in the range from 100 to 500MPa, between 30 and 50°C. Significant deviations from the expected symmetrical protein relaxation kinetics were observed. Whereas downward p-jumps resulted always in single exponential kinetics, the kinetics induced by upward p-jumps were biphasic in the low pressure range and monophasic at higher pressures. The relative amplitude of the slow phase decreased as a function of both pressure and temperature. At 50°C, only the fast phase remained. These results can be interpreted within the framework of a two-dimensional energy surface containing a pressure- and temperature-dependent barrier between two unfolded states differing in the isomeric state of the Asn-113–Pro-114 bond. Analysis of the activation volume of the fast kinetic phase revealed a temperature-dependent shift of the unfolding transition state to a larger volume. The observed compensation of this effect by glycerol offers an explanation for its protein stabilizing effect

Safmat: casos prácticos de materiales en la sala de aprendizaje flexible

El grupo de innovación docente GIDC E-PPM del Departamento de Ciencia de los Materiales e Ingeniería Metalúrgica ha desarrollado una nueva herramienta para favorecer el autoaprendizaje y complementar el trabajo tutelado. El proyecto SAFMAT (Sala de Aprendizaje Flexible en Materiales) utiliza la plataforma Moodle y consiste en una serie de casos prácticos, clasificados por temática y grado de dificultad SAFMAT permite tanto el trabajo tutorizado como individual del alumno. La posibilidad de trabajar sin límite de tiempo y de forma remota permite al alumno profundizar y complementar los conocimientos adquiridos durante las clases teóricas y laboratorios de varias asignaturas de su currículum

Characterization and mechanism of action of the biological control agent Pantoea agglomerans EPS125

La soca EPS125 ha mostrat ser un efectiu agent de control biològic de diferents patògens fúngics de postcollita en diferents fruits. Degut a la seva elevada eficàcia, es va plantejar desenvolupar aquesta soca comercialment i per aquest motiu en el present treball es plantejà complementar la informació necessària pel seu registre. D'acord amb els resultats obtinguts mitjançant proves fenotípiques i genotípiques, la soca EPS125 queda inclosa dins l'espècie Pantoea agglomerans (Enterobacter agglomerans-Erwinia herbicola). En relació a la utilització de fonts de carboni, en el perfil i contingut d'àcids grassos cel·lulars i en el polimorfisme en la longitud dels fragments de macrorestricció genòmica (MRFLP), la soca EPS125 mostrà trets característics que la diferencien d'altres soques. Els dos marcadors moleculars (125.2 i 125.3) específics per la soca EPS125 dissenyats en el present treball mostraren ser semiespecífics per la seva detecció mitjançant la tècnica PCR i Real Time PCR. Quedant pendent l'anàlisi d'especificitat de l'ús combinat dels dos marcadors moleculars en una reacció PCR multiplex. P. agglomerans EPS125 ha mostrat ser molt efectiva en el control de Penicillium expansum en poma amb una dosi efectiva mitjana de 2.7x105 a 7x105 ufc/ml, i una ratio de 25-101 cèl·lules de la soca EPS125 per inactivar una espora del patogen segons el model de saturació hiperbòlica. Segons les aproximacions fenotípiques i estudis genotípics realitzats, sembla que els mecanismes de biocontrol utilitzats per la soca EPS125 contra P. expansum en poma estan directament relacionats amb la capacitat de formació de biofilm per aquesta soca.

Mechanism of action of cyclic antimicrobial peptides

This PhD thesis is the result of the combination of experimental and computational techniques with the aim of understanding the mechanism of action of de novo cyclic decapeptides with high antimicrobial activity. By experimental techniques the influence of the replacement of the phenylalanine for tryptophan residue in their antimicrobial activity was tested and the stability in human serum was also analyzed, in order to evaluate their potential therapeutic application as antitumor agents. On the other hand, the interaction amongst the peptide BPC194 c(KKLKKFKKLQ), the best candidate from the whole library of cyclic peptides, and a model anionic membrane was simulated. The results showed a structure-function relationship derived from the stable conformation of the peptides involved in the membrane permeabilization. As a result, a rational design was performed being BPC490 the peptide with best antimicrobial activity compared with the best active peptide from the original library.