89 resultados para Anàlisi numèrica

em Universitat de Girona, Spain


Relevância:

60.00% 60.00%

Publicador:

Resumo:

As stated in Aitchison (1986), a proper study of relative variation in a compositional data set should be based on logratios, and dealing with logratios excludes dealing with zeros. Nevertheless, it is clear that zero observations might be present in real data sets, either because the corresponding part is completely absent –essential zeros– or because it is below detection limit –rounded zeros. Because the second kind of zeros is usually understood as “a trace too small to measure”, it seems reasonable to replace them by a suitable small value, and this has been the traditional approach. As stated, e.g. by Tauber (1999) and by Martín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2000), the principal problem in compositional data analysis is related to rounded zeros. One should be careful to use a replacement strategy that does not seriously distort the general structure of the data. In particular, the covariance structure of the involved parts –and thus the metric properties– should be preserved, as otherwise further analysis on subpopulations could be misleading. Following this point of view, a non-parametric imputation method is introduced in Martín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2000). This method is analyzed in depth by Martín-Fernández, Barceló-Vidal, and Pawlowsky-Glahn (2003) where it is shown that the theoretical drawbacks of the additive zero replacement method proposed in Aitchison (1986) can be overcome using a new multiplicative approach on the non-zero parts of a composition. The new approach has reasonable properties from a compositional point of view. In particular, it is “natural” in the sense that it recovers the “true” composition if replacement values are identical to the missing values, and it is coherent with the basic operations on the simplex. This coherence implies that the covariance structure of subcompositions with no zeros is preserved. As a generalization of the multiplicative replacement, in the same paper a substitution method for missing values on compositional data sets is introduced

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Linear response functions are implemented for a vibrational configuration interaction state allowing accurate analytical calculations of pure vibrational contributions to dynamical polarizabilities. Sample calculations are presented for the pure vibrational contributions to the polarizabilities of water and formaldehyde. We discuss the convergence of the results with respect to various details of the vibrational wave function description as well as the potential and property surfaces. We also analyze the frequency dependence of the linear response function and the effect of accounting phenomenologically for the finite lifetime of the excited vibrational states. Finally, we compare the analytical response approach to a sum-over-states approach

Relevância:

60.00% 60.00%

Publicador:

Resumo:

An analytic method to evaluate nuclear contributions to electrical properties of polyatomic molecules is presented. Such contributions control changes induced by an electric field on equilibrium geometry (nuclear relaxation contribution) and vibrational motion (vibrational contribution) of a molecular system. Expressions to compute the nuclear contributions have been derived from a power series expansion of the potential energy. These contributions to the electrical properties are given in terms of energy derivatives with respect to normal coordinates, electric field intensity or both. Only one calculation of such derivatives at the field-free equilibrium geometry is required. To show the useful efficiency of the analytical evaluation of electrical properties (the so-called AEEP method), results for calculations on water and pyridine at the SCF/TZ2P and the MP2/TZ2P levels of theory are reported. The results obtained are compared with previous theoretical calculations and with experimental values

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Comparison of donor-acceptor electronic couplings calculated within two-state and three-state models suggests that the two-state treatment can provide unreliable estimates of Vda because of neglecting the multistate effects. We show that in most cases accurate values of the electronic coupling in a π stack, where donor and acceptor are separated by a bridging unit, can be obtained as Ṽ da = (E2 - E1) μ12 Rda + (2 E3 - E1 - E2) 2 μ13 μ23 Rda2, where E1, E2, and E3 are adiabatic energies of the ground, charge-transfer, and bridge states, respectively, μij is the transition dipole moments between the states i and j, and Rda is the distance between the planes of donor and acceptor. In this expression based on the generalized Mulliken-Hush approach, the first term corresponds to the coupling derived within a two-state model, whereas the second term is the superexchange correction accounting for the bridge effect. The formula is extended to bridges consisting of several subunits. The influence of the donor-acceptor energy mismatch on the excess charge distribution, adiabatic dipole and transition moments, and electronic couplings is examined. A diagnostic is developed to determine whether the two-state approach can be applied. Based on numerical results, we showed that the superexchange correction considerably improves estimates of the donor-acceptor coupling derived within a two-state approach. In most cases when the two-state scheme fails, the formula gives reliable results which are in good agreement (within 5%) with the data of the three-state generalized Mulliken-Hush model

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Aquest projecte consisteix en aplicar el càlcul no lineal en la modelització volumètrica numèrica de l’estructura del sistema de descàrrega d’una columna del claustre de la catedral de Girona mitjançant el mètode dels elements finits. A la Universitat de Girona s’ha fet diferents estudis del claustre de la catedral de Girona però sempre simulant un comportament lineal de les característiques dels materials. El programa utilitzat és la versió docent del programa ANSYS disponible al Dept. d’EMCI i l’element emprat ha sigut el SOLID65. Aquest element permet introduir característiques de no linealitat en els models i és adequat per a anàlisi no lineal d’elements com la pedra de Girona

Relevância:

20.00% 20.00%

Publicador:

Resumo:

L’estudi de l’Anàlisi del Cicle de Vida (ACV) ha estat realitzat a l’empresa CRODA Ibèrica S.A - Mevisa Site, en concret a la línia productiva on s’hi fabrica el monoestearat de glicerina utilitzant una eina informàtica comercial denominada SIMAPRO que analitza i compara els aspectes mediambientals d’un producte d’una manera sistemàtica i consistent seguint les recomanacions de les normes ISO 14040

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudi de la situació dels residus d’aparells elèctrics i electrònics al Gironès reformulant la seva gestió actual, valorant si caldria fer una nova planta, així com una campanya de sensibilització social i construcció d’una possible planta intermediària de triatge de RAEE per a la comarca del Gironès

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudi de tractaments innovadors en aigües residuals amb elevada concentració de nitrogen mitjançant la tecnologia ANAMMOX (Anaerobic Ammonium Oxidation) i SHARON i posterior anàlisi teòrica de la gestió dels fangs residuals d’una EDAR

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aquest projecte estudia la situació actual dels espais Xarxa Natura 2000 del Solsonès amb l’ objectiu de: proposar futures actuacions en el territori, donar propostes de gestió turística sostenible per així assegurar-ne la protecció i establir una base per a la redacció de les directrius de gestió d’aquests espais. Dels espais XN2000 del Solsonès s’han escollit dos: Les Obagues de la Riera de Madrona i el de la Ribera Salada

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Anàlisi de textos que tracten el tema de La Passió de Verges

Relevância:

20.00% 20.00%

Publicador:

Resumo:

En aquest document es detalla l’experiència que s’ha portat a terme en l’Escola Politècnica Superior de la UdG. Concretament en l’assignatura de Fonaments Físics per l’enginyeria en l’àmbit de les titulacions de Disseny Industrial i d’Enginyeria Tècnica Industrial especialitat en Mecànica. L’objectiu general de l’activitat és aportar als alumnes els coneixements bàsics sobre camps elèctrics i teoria de circuits, des dels fonaments conceptuals, passant per l’aplicació dels conceptes en problemes fins a realitzar un esquema del procés, així com la utilització de les noves tecnologies tot aplicant com a tècnica d’aprenentatge basat en problemes: Project Based Learning (APB)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudi experimental del comportament de bigues de formigó armades amb barres de materials compostos de matriu polimèrica (FRP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudi sobre la imatge promoguda de Turquia, analitzat des del punt de vista de les agències de viatges espanyoles i també, des dels ens organitzatius del propi país amb l'objectiu d'extreu-re'n un anàlisi comparatiu

Relevância:

20.00% 20.00%

Publicador:

Resumo:

En el marc de l’adaptació a l’Espai Europeu d’Educació Superior, l’avaluació dels aprenentatges esdevé una acció de summa importància en la qual cal tenir en compte els instruments, els mètodes i els agents. Respecte als agents o qui ha d’avaluar, una pràctica a afegir pot ser l’autoavaluació de l’estudiant. En aquesta comunicació es presenta una experiència d’avaluació en dues assignatures dels estudis de Psicologia consistent en la incorporació d’un informe d’autoavaluació de l’estudiant. S’analitza la relació entre els resultats de l’autoavaluació i els resultats de la prova oficial escrita. Així mateix s’estudien els criteris de valoració autoinformats pels alumnes en l’informe d’autoavaluació. S’extreuen conclusions respecte a la possibilitat d’incorporar l’informe d’autoavaluació en l’avaluació de les assignatures

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Creació d’un portal web amb informació sobre el Trampolí Tecnològic de la UdG (activitats, ofertes, etc.), i disseny d'una intranet que permeti al trampolí gestionar les diferents funcions que s'hi duen a terme (gestió dels diferents gestors de projectes, projectes que es tutelen, emprenedors i inversors que intervenen, ajudes que es poden rebre, etc.)