An approach to visual servoing based on coded light

Positioning a robot with respect to objects by using data provided by a camera is a well known technique called visual servoing. In order to perform a task, the object must exhibit visual features which can be extracted from different points of view. Then, visual servoing is object-dependent as it depends on the object appearance. Therefore, performing the positioning task is not possible in presence of non-textured objects or objects for which extracting visual features is too complex or too costly. This paper proposes a solution to tackle this limitation inherent to the current visual servoing techniques. Our proposal is based on the coded structured light approach as a reliable and fast way to solve the correspondence problem. In this case, a coded light pattern is projected providing robust visual features independently of the object appearance

Robust decoupled visual servoing based on structured light

This paper focuses on the problem of realizing a plane-to-plane virtual link between a camera attached to the end-effector of a robot and a planar object. In order to do the system independent to the object surface appearance, a structured light emitter is linked to the camera so that 4 laser pointers are projected onto the object. In a previous paper we showed that such a system has good performance and nice characteristics like partial decoupling near the desired state and robustness against misalignment of the emitter and the camera (J. Pages et al., 2004). However, no analytical results concerning the global asymptotic stability of the system were obtained due to the high complexity of the visual features utilized. In this work we present a better set of visual features which improves the properties of the features in (J. Pages et al., 2004) and for which it is possible to prove the global asymptotic stability

Plane-to-plane positioning from image-based visual servoing and structured light

In this paper we face the problem of positioning a camera attached to the end-effector of a robotic manipulator so that it gets parallel to a planar object. Such problem has been treated for a long time in visual servoing. Our approach is based on linking to the camera several laser pointers so that its configuration is aimed to produce a suitable set of visual features. The aim of using structured light is not only for easing the image processing and to allow low-textured objects to be treated, but also for producing a control scheme with nice properties like decoupling, stability, well conditioning and good camera trajectory

A new optimised De Bruijn coding strategy for structured light patterns

Coded structured light is an optical technique based on active stereovision that obtains the shape of objects. One shot techniques are based on projecting a unique light pattern with an LCD projector so that grabbing an image with a camera, a large number of correspondences can be obtained. Then, a 3D reconstruction of the illuminated object can be recovered by means of triangulation. The most used strategy to encode one-shot patterns is based on De Bruijn sequences. In This work a new way to design patterns using this type of sequences is presented. The new coding strategy minimises the number of required colours and maximises both the resolution and the accuracy

Overview of coded light projection techniques for automatic 3D profiling

Obtaining automatic 3D profile of objects is one of the most important issues in computer vision. With this information, a large number of applications become feasible: from visual inspection of industrial parts to 3D reconstruction of the environment for mobile robots. In order to achieve 3D data, range finders can be used. Coded structured light approach is one of the most widely used techniques to retrieve 3D information of an unknown surface. An overview of the existing techniques as well as a new classification of patterns for structured light sensors is presented. This kind of systems belong to the group of active triangulation method, which are based on projecting a light pattern and imaging the illuminated scene from one or more points of view. Since the patterns are coded, correspondences between points of the image(s) and points of the projected pattern can be easily found. Once correspondences are found, a classical triangulation strategy between camera(s) and projector device leads to the reconstruction of the surface. Advantages and constraints of the different patterns are discussed

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

A survey addressing the fundamental matrix estimation problem

Epipolar geometry is a key point in computer vision and the fundamental matrix estimation is the only way to compute it. This article surveys several methods of fundamental matrix estimation which have been classified into linear methods, iterative methods and robust methods. All of these methods have been programmed and their accuracy analysed using real images. A summary, accompanied with experimental results, is given

[Ressenya del llibre Rediscovering geography: new relevance for science and society, de Rediscovering Geography Committee, National Research Council]

El llibre ressenyat pretén ser una síntesi i una avaluació de la situació de la geografia als Estats Units. Estructurat en vuit capítols, els sis primers són una anàlisi de diversos aspectes de la geografia i els dos últims expliquen quina estratègia hauria de portar-se a terme per enfortir el paper de la geografia en el món acadèmic i en la societat en general

Martin Heidegger

Nota biogràfica sobre el filòsof Martin Heidegger on es fa, per una banda, un breu repàs dels principals fets de la seva vida com a filòsof i, per una altra banda, un breu repàs de la seva obra

Vicens i Vices i la història contemporània

Dins del marc del número monogràfic dedicat a Jaume Vicens Vives, l’autora fa un breu repàs per l’obra de l’historiador, destacant sobretot la preocupació de Vives per les qüestions de caràcter epistemològic i metodològic de l’anàlisi històrica

El Director del Museu Diocesà

Article sobre l’obra del Doctor Jaume Marqués i Casanovas com a director del Museu Diocesà de Girona, duta a terme durant el segle XX

Noves llums sobre la Guerra de Successió [Ressenya del llibre Els catalans i Felip V: De la conspiració a la revolta, 1700-1705, de Joaquim Albareda i Salvadó]

Historiografia de la guerra catalana de Successió. El llibre que ressenya va obtenir el IV Premi Internacional Jaume Vicens Vives de Ciències Socials

Les Aportacions de Vicens i Vives a la geografia

És sabuda i reconeguda la trajectòria de Jaume Vicens Vives dins els camps de la història i la historiografia. Aquest article, però, tracta les seves aportacions en l’àmbit de la geografia. Malgrat que Vicens Vives considera la geografia una ciència auxiliar de la història, no entén una sense l’altra

Tren d’alta velocitat i desenvolupament local urbà. Aportacions a una nova base teòrica

Una de les finalitats principals del tren d’alta velocitat és la d’aportar desenvolupament local en aquelles ciutats i territoris on se’n construeixi una estació. Per aquesta raó, calen reflexions teòriques que ajudin els agents i les institucions a planificar correctament l’arribada de la nova gran infraestructura de transport, especialment en els aspectes relacionats amb la capacitat d’organització dels actors territorials. La teoria reticular pot ser una base teòrica útil per evitar concepcions deterministes de la relació entre infraestructura i territori, per explicar com es produeix el procés de desenvolupament local i per demostrar la importància dels agents territorials en aquest procés

El patró que sorgia en platja i l'enarratio auctorum

Es presenta una crítica textual de fragments de l’obra d’Ausiàs Marc. Es tracten, entre altres, les imatges marineres