Thermal lens technique to study the effect of pH on electronic energy transfer in organic dye mixtures.

The effect of pH on the fluorescence efficiency of fluorescein is evaluated using thermal lens technique. Fluorescence efficiency increases as the sample becomes more and more alkaline. But when fluorescein is mixed with rhodamine B fluorescence quenching of fluorescein takes place with the excitation of rhodamine B. The electronic energy transfer in this mixture is investigated using Optical Parametric Oscillator as the excitation source. The effect of pH on the efficiency of energy transfer in fluorescein–rhodamine B mixture is presented.

Tunable diode Laser Absorption Spectroscopy ,Nir Overtone and Life Studies of Some Organic Compound

The present work is mainly concentrated on setting up a NIR tunable diode laser absorption (TDLA) spectrometer for high-resolution molecular spectroscopic studies. For successfully recording the high-resolution tunable diode laser spectrum, various experimental considerations are to be taken into account like the setup should be free from mechanical vibrations, sample should be kept at a low pressure, laser should be in a single mode operation etc. The present experimental set up considers all these factors. It is to be mentioned here that the setting up of a high resolution NIR TDLA spectrometer is a novel experiment requiring much effort and patience. The analysis of near infrared (NIR) vibrational overtone spectra of some substituted benzene compounds using local mode model forms another part of the present work. An attempt is made to record the pulsed laser induced fluorescence/Raman spectra of some organic compounds. A Q-switched Nd:YAG laser is used as the excitation source. A TRIAX monochromator and CCD detector is used for the spectral recording. The observed fluorescence emission for carbon disulphide is centered at 680 nm; this is assigned as due to the n, p* transition. Aniline also shows a broad fluorescence emission centered at 725 nm, which is due to the p,p* transition. The pulsed laser Raman spectra of some organic compounds are also recorded using the same experimental setup. The calibration of the set up is done using the laser Raman spectra of carbon tetrachloride and carbon disulphide. The observed laser Raman spectra for aniline, o-chloroaniline and m-chlorotoluene show peaks characteristics of the aromatic ring in common and the characteristics peaks due to the substitutuent groups. Some new peaks corresponding to low-lying vibrations of these molecules are also assigned

A low-inductance, long-life, triggered spark gap switch for Blumlein-driven lasers

A low inductance, triggered spark gap switch suitable for a high-current fast discharge system has been developed. The details of the design and fabrication of this pressurized spark gap, which uses only commonly available materials are described. A transverse discharge Blumlein-driven N2 laser incorporating this device gives a peak output power of 700 kW with a FWHM of 3 ns and an efficiency of 0.51%, which is remarkably high for a pulsed nitrogen laser system.

Fish habitats and species assemblage in the selected rivers of Kerala and investigation on life history traits of Puntius carnaticus(Jerdon,1849)

This thesis entitled Fish habitats and species assemblage in the selected rivers of kerala and investigation on life history traits of puntius carnaticus (JERDON,1849). Ecology is a new and exceedingly complex field of study, even though its concept was recognized by the Apostles in their use of the phrase ‘all flesh is grass.central role to play both in order to understand better the biodiversity phenomenon and to be able to draw up clear guidelines for careful resource management. In a review by WWF, IUCN and UNEP on the ways of conserving genetic diversity of freshwater fish it was recommended that the best way to conserve species diversity is to conserve habitat.The habitat studies in freshwater ecosystems are very essential for the proper understanding and management of human impact on fish diversity, to study the relationship between habitat variables and fish species assemblage structure, quantification of ecosystem degradation, habitat quality and biotic integrity of the ecosystems, development of habitat suitability index (I-ISI) models and classification of river reaches based on their physico-chemical properties. Therefore in the present study an attempt was made to assess the biodiversity potential and the relationship between habitat variables and fish species assemblage structure in six major river systems of Kerala which would be very useful in impressing upon the seriousness of habitat degradIn the present study, in Kabbini river system 15 locations encompassing between 721 946m above MSL were surveyed.ation and biotic devastation undergone in the major river systems of Kerala.During the present study the Habitat Quality Score (HQ) developed by the Ohio EPA was applied for the first time in India.The result of the present study revealed that, among various variables analysed, altitude has a very significant influence in deciding the fish diversity in six major river systems of Kerala. The fish diversity studied on the basis of Shanon-Weiner and Simpson diversity indices revealed that even though some minor variations occur with the suitability and complexity of habitats, the altitude showed inverse relationship with fish diversity.The present study revealed that the National Policy on the interlinking of rivers would permanently alter the HSI indices of the above mentioned fish species, which are now solely protected by the individuality of the rivers where their limited occurrence was notice.

Some concepts and models usefulninthe analysis of discrete life time data

This thesis entitled Reliability Modelling and Analysis in Discrete time Some Concepts and Models Useful in the Analysis of discrete life time data.The present study consists of five chapters. In Chapter II we take up the derivation of some general results useful in reliability modelling that involves two component mixtures. Expression for the failure rate, mean residual life and second moment of residual life of the mixture distributions in terms of the corresponding quantities in the component distributions are investigated. Some applications of these results are also pointed out. The role of the geometric,Waring and negative hypergeometric distributions as models of life lengths in the discrete time domain has been discussed already. While describing various reliability characteristics, it was found that they can be often considered as a class. The applicability of these models in single populations naturally extends to the case of populations composed of sub-populations making mixtures of these distributions worth investigating. Accordingly the general properties, various reliability characteristics and characterizations of these models are discussed in chapter III. Inference of parameters in mixture distribution is usually a difficult problem because the mass function of the mixture is a linear function of the component masses that makes manipulation of the likelihood equations, leastsquare function etc and the resulting computations.very difficult. We show that one of our characterizations help in inferring the parameters of the geometric mixture without involving computational hazards. As mentioned in the review of results in the previous sections, partial moments were not studied extensively in literature especially in the case of discrete distributions. Chapters IV and V deal with descending and ascending partial factorial moments. Apart from studying their properties, we prove characterizations of distributions by functional forms of partial moments and establish recurrence relations between successive moments for some well known families. It is further demonstrated that partial moments are equally efficient and convenient compared to many of the conventional tools to resolve practical problems in reliability modelling and analysis. The study concludes by indicating some new problems that surfaced during the course of the present investigation which could be the subject for a future work in this area.

Systematics, Life history traits, abundance andstock assessment of cobia, Rachycentron canadum ( Linnaeus, 1766) occurring in Indian waters with special reference to the north west coast in India

This thesis entitled Systematics,life history traits ,abundance and stock assessment of cobia rachycentron canadum (linnaeus ,1766) occurring in indian waters with special reference to the northwest coast of india.Cobia, Rachycentron canadum is a fast growing pelagic fish belonging to the monotypic family Rachycentridae. They show worldwide distribution in tropical and sub tropical waters. Cobia is exploited commercially in various countries like Taiwan, Pakistan, India, United State of America, Australia, Gulf of Mexico and the Caribbean. Recreational fishery of Cobia exists in different parts of the world. In India Cobia is caught as bycatch of trawlers, gillnet and hook and line fishery.This study also focuses on to bring out the distribution pattern and also to assess the biomass and estimate sustainable yield of Cobia inhabiting in Indian EEZ. In addition to above, present study standardised live collection methods and also reviewed culture prospects.Results of osteological study and morphological studies indicate its close resemblance to Remora and support the view that Cobia was evolved from Dolphin fishes and remoras followed it. Study also confirmed that Cobia does not have any relative or similar species and is a monotypic species belonging to the family Rachycentridae. Re description of the species was done based on the characters identified. In this study, feeding intensity was also assessed following methods like Gastrosomatic index, Mean index of feeding intensity and Index of fullness. Sex wise, month wise and length group wise fluctuations in the feeding intensity also were studied. Cobia actively fed during post monsoon period. In general, adult fed actively than the juveniles. Trophic level value estimated (4.36) indicates that Cobia occupy top level position in the food chain.

Packaging materials for shrimp, fish and fish products, their properties, selection and effect of different packaging materials on their shelf life

Packaging is important not only in extending the shellife of fish and fishery products but also improving their marketability. In the recent years, significant development have taken place in the packaging industry. During the past decade in India, there is almost a packaging revolution with the availability of variety packaging materials, thus generating better packaging consciousness in other producer/manufacturing industries. But unfortunately, such realisation is not forthcoming in the fisheries sector and packaging techniques for local and export trade continues to be on traditional lines with their inherent drawbacks and limitations. Better packaging ensures improved quality and presentation of the products and ensures higher returns to the producer. Among several packaging materials used in fishery industry, ISI specifications had been formulated only for corrugated fibre board boxes for export of seafoods and froglegs. This standard was formulated before containersiation came into existance in the export of marine products. Before containerisation, the standards were stringent in view of the rough handling, transportation and storage. Two of the common defects reported in the master cartons exported from India are low mechanical strength and tendency to get wet. They are weakened by the deposits of moisture caused by temperature fluctuations during loading, unloading and other handling stages. It is necessary to rectify the above defects in packaging aquatic products and hence in the present study extensive investigations are carried out to find out the reasons for the damage of master cartons, to evolve code of practice for the packaging oi frozen shrimp for exports, development of alternative style of packaging for the shipping container, development of suitable consumer packaging materials for fish soup powder, cured dried mackeral, fish pickles in oil and frozen shrimp. For the development of suitable packaging materials, it is absolutely essential to know the properties of packaging materials, effect of different packaging materials on theirshelf life and their suitability for food contact applications.

Effect Of Raw Material Quality On The Shelf Life Of Frozen Stored Fish And Fishery Products

Frozen storage characteristics and shelflife vary considerably among species as well as within the species (Powrie, 1973; Fennema. 1973). This can be attributed to the variation in the composition of fish among various species. In certain species like sardines and mackerel. wide seasonal variation in chemical composition occur within the species. These variations affect the quality and shelflife. The nutritional level of water. spawning, method of catching, struggling etc. are found to have profound influence on the condition of the fresh fish. Soon after death the deteriorative changes in fish start due to autolysis and bacterial growth. The rate of these changes depends mainly on temperature. The handling methods have great influence on bacterial contamination. Thus the type oi'handling. temperature control. period of chill storage. processing methods. type of freezing, condition of frozen storage and period of storage affect the quality and shelflife Of the fisho In the present study extensive investigations were carried out on various factors affecting the quality of fish as well as their effect on the physical. chemical and sensory qualities of fish during frozen storage and the shelflife

Some bivariate life time models in discrete time"

The term reliability of an equipment or device is often meant to indicate the probability that it carries out the functions expected of it adequately or without failure and within specified performance limits at a given age for a desired mission time when put to use under the designated application and operating environmental stress. A broad classification of the approaches employed in relation to reliability studies can be made as probabilistic and deterministic, where the main interest in the former is to device tools and methods to identify the random mechanism governing the failure process through a proper statistical frame work, while the latter addresses the question of finding the causes of failure and steps to reduce individual failures thereby enhancing reliability. In the probabilistic attitude to which the present study subscribes to, the concept of life distribution, a mathematical idealisation that describes the failure times, is fundamental and a basic question a reliability analyst has to settle is the form of the life distribution. It is for no other reason that a major share of the literature on the mathematical theory of reliability is focussed on methods of arriving at reasonable models of failure times and in showing the failure patterns that induce such models. The application of the methodology of life time distributions is not confined to the assesment of endurance of equipments and systems only, but ranges over a wide variety of scientific investigations where the word life time may not refer to the length of life in the literal sense, but can be concieved in its most general form as a non-negative random variable. Thus the tools developed in connection with modelling life time data have found applications in other areas of research such as actuarial science, engineering, biomedical sciences, economics, extreme value theory etc.

Characterizations of Life Distributions Using Conditional Expectations of Doubly (Interval) Truncated Random Variables

In this article, we study reliability measures such as geometric vitality function and conditional Shannon’s measures of uncertainty proposed by Ebrahimi (1996) and Sankaran and Gupta (1999), respectively, for the doubly (interval) truncated random variables. In survival analysis and reliability engineering, these measures play a significant role in studying the various characteristics of a system/component when it fails between two time points. The interrelationships among these uncertainty measures for various distributions are derived and proved characterization theorems arising out of them

Identification of models using failure rate and mean residual life of doubly truncated random variables

In this paper, we study the relationship between the failure rate and the mean residual life of doubly truncated random variables. Accordingly, we develop characterizations for exponential, Pareto 11 and beta distributions. Further, we generalize the identities for fire Pearson and the exponential family of distributions given respectively in Nair and Sankaran (1991) and Consul (1995). Applications of these measures in file context of lengthbiased models are also explored

Studies on the effect of Polycyclic Aromatic Hydrocarbons in the life and activity of Perna spp

In the present study an endeavour has been made to analyse the acute toxicity of WAFs of Bombay High crude and Light Diesel oil on commercially important bivalve species Perna viridis and Perna indica by static bioassay methods. The toxic effects of chemicals in the WAF on the organisms ; their tissues and eventually on rate functions have been elucidated. Marine oil pollution not only affects productivity and quality of marine organisms but also eventually affects the health of human population due to a possible health risk by way of consumption of oil contaminated seafood