Studies on the Effect of an External Flaw on the Tensile Strength of Short Kevlar Fiber-Thermoplastic Polyurethane Composites

The effect of an external flaw on the tensile strength of short kevlar fiber-thermoplastic composites has been studied with respect to fiber content, fiber orientation, location of the external flaw, and the temperature of test. The composites showed a three-step reduction in tensile strength with increasing flaw size. The critical flaw-length region was shifted to higher flaw-size levels with increasing fiber content. With increasing temperature, the critical flaw length was increased in the case of unfilled TPU, whereas it remained more or less constant in the case of short kevlar fiber-filled-TPU composite.

Studies on the dynamics and rheology of dilute suspensions of Brownian particles in simple shear flow under the action of an external force

We present a novel approach to computing the orientation moments and rheological properties of a dilute suspension of spheroids in a simple shear flow at arbitrary Peclct number based on a generalised Langevin equation method. This method differs from the diffusion equation method which is commonly used to model similar systems in that the actual equations of motion for the orientations of the individual particles are used in the computations, instead of a solution of the diffusion equation of the system. It also differs from the method of 'Brownian dynamics simulations' in that the equations used for the simulations are deterministic differential equations even in the presence of noise, and not stochastic differential equations as in Brownian dynamics simulations. One advantage of the present approach over the Fokker-Planck equation formalism is that it employs a common strategy that can be applied across a wide range of shear and diffusion parameters. Also, since deterministic differential equations are easier to simulate than stochastic differential equations, the Langevin equation method presented in this work is more efficient and less computationally intensive than Brownian dynamics simulations.We derive the Langevin equations governing the orientations of the particles in the suspension and evolve a procedure for obtaining the equation of motion for any orientation moment. A computational technique is described for simulating the orientation moments dynamically from a set of time-averaged Langevin equations, which can be used to obtain the moments when the governing equations are harder to solve analytically. The results obtained using this method are in good agreement with those available in the literature.The above computational method is also used to investigate the effect of rotational Brownian motion on the rheology of the suspension under the action of an external force field. The force field is assumed to be either constant or periodic. In the case of con- I stant external fields earlier results in the literature are reproduced, while for the case of periodic forcing certain parametric regimes corresponding to weak Brownian diffusion are identified where the rheological parameters evolve chaotically and settle onto a low dimensional attractor. The response of the system to variations in the magnitude and orientation of the force field and strength of diffusion is also analyzed through numerical experiments. It is also demonstrated that the aperiodic behaviour exhibited by the system could not have been picked up by the diffusion equation approach as presently used in the literature.The main contributions of this work include the preparation of the basic framework for applying the Langevin method to standard flow problems, quantification of rotary Brownian effects by using the new method, the paired-moment scheme for computing the moments and its use in solving an otherwise intractable problem especially in the limit of small Brownian motion where the problem becomes singular, and a demonstration of how systems governed by a Fokker-Planck equation can be explored for possible chaotic behaviour.

Mechanical Properties of Short-Isora-Fiber-Reinforced Natural Rubber Composites: Effects of Fiber Length, Orientation, and Loading; Alkali Treatment;and Bonding Agent

A series of short-isora-fiber-reinforced natural rubber composites were prepared by the incorporation of fibers of different lengths (6, 10, and 14 mm) at 15 phr loading and at different concentrations (10, 20, 30, and 40 phr) with a 10 mm fiber length. Mixes were also prepared with 10 mm long fibers treated with a 5% NaOH solution. The vulcanization parameters, processability, and stress-strain properties of these composites were analyzed. Properties such as tensile strength, tear strength, and tensile modulus were found to be at maximum for composites containing longitudinally oriented fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF] resin) showed mechanical properties superior to all other composites. Scanning electron microscopy (SEM) studies were carried out to investigate the fiber surface morphology, fiber pullout, and fiber-rubber interface. SEM studies showed that the bonding between the fiber and rubber was improved with treated fibers and with the use of bonding agent.

OPTIMAL UTILIZATION OF SERVICE FACILITY FOR A k-OUT-OF-n SYSTEM WITH REPAIR BY EXTENDING SERVICE TO EXTERNAL CUSTOMERS IN A RETRIAL QUEUE

In this paper, we study a k-out-of-n system with single server who provides service to external customers also. The system consists of two parts:(i) a main queue consisting of customers (failed components of the k-out-of-n system) and (ii) a pool (of finite capacity M) of external customers together with an orbit for external customers who find the pool full. An external customer who finds the pool full on arrival, joins the orbit with probability and with probability 1− leaves the system forever. An orbital customer, who finds the pool full, at an epoch of repeated attempt, returns to orbit with probability (< 1) and with probability 1 − leaves the system forever. We compute the steady state system size probability. Several performance measures are computed, numerical illustrations are provided.

Market Orientation in Indian Seafood Processing Firms

This thesis studied the impact of market orietnation on business performance, in the seafood industry, which is a unique situation wherein the firms were all 100% export oriented. The study was able to prove that in the context of the seafood indsutry, implementation of market orientation principles will lead to increase in business performance. The business performance variables were measured under two heads, namely economic performance and non-economic performance. Market orientation in Indian seafood firms was significantly and postiively related to both the performance measures. Under the non-economic performance, were the customer and employee consequences.Again market orientation was positively and significantly related to both the consequences.Thus, the implication arising from the study is this: market orientation in Indian seafood processing firms increases their business performance. The implementation of market orientation will help the seafood firms in gaining competitve advantages in exporting. This in turn will result in increased exports and the position of Indian seafood in the global market will be strengthened. It will thus become a leading player in the global fish trade. Next, the focus was on the effect of the antecedents on the market orientation of a firm. It was seen that several factors were antecedents to the adoption of market orientation principles. They include top management emphasis, conflict, centralization and reward system. It is noted that top management emphasis and support is vital to the market orientation programme. The top management needs to adopt market oriented behaviour and reinforce the need for being market oriented, for it to percolate down the line.Interdepartmental conflict is seen to affect market orientation positively. A large percent of the Indian seafood firms are traditionally family-owned companies, rather than professionally managed firms. This would result in promulgation of old ideas of management whereby, conflict was seen as a healthy exercise, which helped to build up each department's efficiency. But, this view in the long run proves to be detrimental to the firm's performance and must therefore be kept to a bare minimum, if any.Decentralisation of decision making facilitates the participation of the lower level employees and builds up their motivational levels and commitment to the firm. Thus employees are encouraged to make their own decisions, so that they can deal with customers faster and more efficiently. Reward systems help improve an employee's morale, provide encouragement and helps inculcate commitment and loyalty. It improves the employee's self worth and fulfills his need for achievement. A satisfied employee works better, produces more output and needs less supervision, and is happy, thereby reducing costs to the company for replacement and retraining, if the employee quits.Competitive intensity plays a moderating role on the market orientation business performance. Thus in times of greater competition, the relationship between market orientation and business performance grows stronger. Thus, this thesis was successful in investigating a positive relationship between business performance and market orientation.

Marketing orientation of small Firms- a study with reference to Trivandrum district

The small business has attracted very little attention of the historians in the ancient times, or public mind inspite of the fact that its impact on the various civilisations has been phenominal. Even in recent times economists considered the small firms as inappropriate, obselate and anacronistic as it cannot assimilate the full potential of technological change in the production system. But today everybody agrees that the small business has a definite role in shaping the human destiny and enhancing the quality of life in any society. In a developing country like India small firms are necessary to generate employment for millions, high standared of personal choice to consumers, provide competition and act as a check to monopoly power; further the small firms provide an important source of innovation and in turn it paves the way for entrepreneur development in the society. In many countries the small enterprises played a significant role in the growth and development of their economic system. Italy and Japan are quoted as classic examples . In India, too, with the abundance of labour and scarce capital resources small firms have been promoted and protected by the government. But one must say that the small firm owners/managers in India have been shy in developing a market orientation in themeselves. Due to this many firms failed and closed. The alarming rate of sickness among the small firms in India may be attributed to the lack of market driven/customer orientation approach among the owner/managers of small business. So the study on the market oreintation of the small firms has never been in the mind of marketing experts and academicians. Thus, an attempt is made to enquire into them systematically and scientifically. For the study, Trivandrum district in Kerala has been selected. The data for the study has been collected by the help of a schedule which has been prepared after consulting the relevant literature and after consultation with experts in the field, academicians and practising managers.

Value orientation of professional students in kerala

The present study is on value orientation of professional students•and as such the theoretical value is inherent and implied. Variation on this value is likely to be limited among the subjects. The relevance of the present study is with particular reference, to management as a profession. In organisational settings motivation plays an important role. According to McClelland's theory of needs, achievement, power, and affiliation are the three important needs that help in understanding motivation. Achieve~ent need may be defined as the drive to excel, to achieve in relation to a set of standards, and to strive to succeed. Some people have a compelling drive to succeed. They have a desire to do something better or more efficiently than it has been done before. McClelland found that high achievers differentiate themselves from others by their desire to do things . better. Considering this fact, 'achievement' is included as one of the values for the study

Establishment of Shrimp Cell Lines: Perception and Orientation

Development of continuous shrimp cell lines for effective investigation on shrimp viruses remains elusive with an arduous history of over 25 years. Despite presenting challenges to researchers in developing a cell line, the billion dollar aquaculture industry is under viral threat. Advances in molecular biology and various gene transfer technologies for immortalization of cells have resulted in the development of hundreds of cell lines from insects and mammals, but yet not a single cell line has been developed from shrimp and other marine invertebrates. Though improved growth and longevity of shrimp cells in vitro could be achieved by using modified growth media this did not make any leap to spontaneous transformation; probably due to the fact that shrimp cells inhibited neoplastic transformations. Oncogenic induction and immortalization are considered as the possible ways, and an exclusive medium for shrimp cell culture and an appropriate mode of transformation are crucial. In this review status of shrimp cell line development and its future orientation are discussed

On tuning the orientation of grains of spray pyrolysed ZnO thin films

Effect of varying spray rate on the structure and optoelectronic properties of spray pyrolysed ZnO film is analysed. ZnO films were characterised using different techniques such as X-ray diffraction (XRD), photoluminescence, electrical resistivity measurement, and optical absorption. The XRD analysis proved that, with the increase in spray rate, orientation of the grains changed from (1 0 1) plane to (0 0 2) plane. The films exhibited luminescence in two regions—one was the ‘near band-edge’ (NBE) (∼380 nm) emission and the other one was the ‘blue-green emission’ (∼503 nm). Intensity of the blue-green emission decreased after orientation of grains shifted to (0 0 2) plane. Scanning electron microscope (SEM) analysis of the films asserts that spray rate has major role in improving the crystallographic properties of the films. Moreover resistivity of the films could be lowered to 2.4×10−2 cm without any doping or post-deposition annealing

Market Orientation and Organisational Performance of Nonprofit Organizations in Kerala

This study is the concentrates different nature and practice of Marketing in nonprofit organization.How market indication can contribute the organizational performance of nonprofit organizations.