Bio-inspired optimization & sampling technique for side-chain packing in MCCE

The prediction of proteins' conformation helps to understand their exhibited functions, allows for modeling and allows for the possible synthesis of the studied protein. Our research is focused on a sub-problem of protein folding known as side-chain packing. Its computational complexity has been proven to be NP-Hard. The motivation behind our study is to offer the scientific community a means to obtain faster conformation approximations for small to large proteins over currently available methods. As the size of proteins increases, current techniques become unusable due to the exponential nature of the problem. We investigated the capabilities of a hybrid genetic algorithm / simulated annealing technique to predict the low-energy conformational states of various sized proteins and to generate statistical distributions of the studied proteins' molecular ensemble for pKa predictions. Our algorithm produced errors to experimental results within .acceptable margins and offered considerable speed up depending on the protein and on the rotameric states' resolution used.

Letter Discussing the Parliamentary Act to Regulate the Curing, Packing, and Inspection of Beef and Pork. 1819

A letter on behalf of Sir Peregrine Maitland, the Lieutenant Governor of Upper Canada to those in Niagara discussing an act passed in parliament regulating the curing, packing and inspection of beef and pork. The letter also states that William Duff Miller was appointed as an Inspector of Beef and Pork within the District of Niagara.

Designing Meat Packing Plant Handling Facilities for Cattle and Hogs

The focus is on design, more specifically, "animal handling facilities which are labor saving and reduce bruise losses". The article studies: Unloading Chutes, Stockyard Design, Hog Plant Stockyard, General Purpose Small Stockyard, Beef Stockyard, Cattle Crowding Pens, Hog Crowding Pens, Slopes in Chutes and Crowding Pens, Single File Chutes General Recommendations, Single File Chutes for Cattle, Slaughter Restrainers,

Molecular mechanics calculations of tin-bis (triphenylphosphine oxide) complexes

The capability of molecular mechanics for modeling the wide distribution of bond angles and bond lengths characteristic of coordination complexes was investigatecl. This was the preliminary step for future modeling of solvent extraction. Several tin-phosphine oxide COrnI)le:){es were selected as the test groUl) for t.he d,esired range of geometry they eX!libi ted as \-vell as the ligands they cOD.tained r Wllich were c\f interest in connection with solvation. A variety of adjustments were made to Allinger's M:M2 force·-field ill order to inl.prove its performance in the treatment of these systems. A set of u,nique force constants was introduced for' those terms representing the metal ligand bond lengths, bond angles, and, torsion angles. These were significantly smaller than trad.itionallY used. with organic compounds. The ~1orse poteIlt.ial energ'Y function was incorporated for the M-X l')ond lE~ngths and the cosine harmonic potential erlerg-y function was invoked for the MOP bond angle. These functions were found to accomodate the wide distribution of observed values better than the traditional harmonic approximations~ Crystal packing influences on the MOP angle were explored thr"ollgh ttle inclusion of the isolated molecule withil1 a shell cc)ntaini11g tl1e nearest neigl1'bors duri.rlg energy rninimization experiments~ This was found to further improve the fit of the MOP angle.

Mechanism of tocopherol transfer by human α-tocopherol transfer protein (α-hTTP)

Vitamin E is a well known fat soluble chain breaking antioxidant. It is a general tenn used to describe a family of eight stereoisomers of tocopherols. Selective retention of a-tocopherol in the human circulation system is regulated by the a -Tocopherol Transfer Protein (a-TIP). Using a fluorescently labelled a-tocopherol (NBD-a-Toc) synthesized in our laboratory, a fluorescence resonance energy transfer (FRET) assay was developed to monitor the kinetics of ligand transfer by a-hTTP in lipid vesicles. Preliminary results implied that NBD-a-Toe simply diffused from 6-His-a-hTTP to acceptor membranes since the kinetics of transfer were not responsive to a variety of conditions tested. After a series of trouble shooting experiments, we identified a minor contaminant, E coli. outer membrane porin F (OmpF) that co-purified with 6-His-a-hTTP from the metal affinity column as the source of the problem. In order to completely avoid OmpF contamination, a GST -a-hTTP fusion protein was purified from a glutathione agarose column followed by an on-column thrombin digestion to remove the GST tag. We then demonstrated that a-hTTP utilizes a collisional mechanism to deliver its ligand. Furthennore, a higher rate of a-tocopherol transfer to small unilamellar vesicles (SUV s) versus large unilamellar vesicles (LUV s) indicated that transfer is sensitive to membrane curvature. These findings suggest that ahTTP mediated a-Toc transfer is dominated by the hydrophobic nature of a-hTTP and the packing density of phospholipid head groups within acceptor membranes. Based on the calculated free energy change (dG) when a protein is transferred from water to the lipid bilayer, a model was generated to predict the orientation of a-hTTP when it interacts with lipid membranes. Guided by this model, several hydrophobic residues expected to penetrate deeply into the bilayer hydrophobic core, were mutated to either aspartate or alanine. Utilizing dual polarization interferometry and size exclusion vesicle binding assays, we identified the key residues for membrane binding to be F 165, F 169 and 1202. In addition, the rates of ligand transfer of the u-TTP mutants were directly correlated to their membrane binding capabilities, indicating that membrane binding was likely the rate limiting step in u-TTP mediated transfer of u-Toc. The propensity of u-TTP for highly curved membrane provides a connection to its colocalization with u-Toc in late endosomes.

New Building Blocks for Dual-Property Molecule-Based Magnets

Two classes of compounds have been prepared and characterized as building blocks for chiral magnets and ferromagnetic conductors. In the fIrst project, the organic framework of a pentadentate, (N302) macro cycle has been synthetically modifIed to introduce phenyl substituents into its organic framework and the synthesis of four new [Fe(In(N302)(CN)2] complexes (I) - (IV) is presented. [Molecular diagram availble in pdf] This work represents the fIrst structural and magnetic studies of a family of spin crossover macrocycles that comprise of both structural and stereo-isomers. Magnetic susceptibility and Mossbauer data for the R,R-complex (I) is consistent with both a thermal and a light induced spin crossover transition. The X-ray data supports a change in geometry accompanying the thermal spin transition, from a high spin (HS) 7 -coordinate complex at room temperature to a low spin (LS) 5-coordinate complex at 100 K. The crystal structure ofthe racemic complex (III) reveals a HS, 7-coordinate complex at 200 K that undergoes no signifIcant structural changes on cooling. In contrast, the magnetic - susceptibility and Mossbauer data collected on a powder sample of the racemic complex are consistent with a LS complex. Finally, the meso complex (IV) was prepared and its structure and magnetic properties are consistent with a 5-coordinate LS complex that remains low spin, but undergoes conformational changes on cooling in solution. The chiral [Fe(H)(N302)(CN)2] macro cycle (I), together with its Mn(H) and Fe(H) derivatives have also been exploited as building blocks for the self-assembly of chiral magnets. In the second project, a synthetic route for the preparation of tetrathiafulvalene (TTF) donors covalently attached to a diisopropyl verdazyl radical via a cross conjugated pyridyl linker IS presented. Following this strategy, four new TTF-py- (diisopropyl)verdazyl radicals have been prepared and characterized (V) - (VIII) . [Molecular diagram available in pdf] The first (2:1) charge transfer complex ofa TTF-py-(diisopropyl)verdazyl radical donor and a TCNQ acceptor has been prepared and structurally characterized. The crystal packing shows that the donor and acceptor molecules are organized in a mixed stacking arrangement consistent with its insulating behaviour. EPR and magnetic susceptibility data support intramolecular ferromagnetic interactions between the TTF and the verdazyl radicals and antiferromagnetic interactions between TTF donors within a stack. In an attempt to increase the intramolecular exchange interaction between the two radicals, a TTF-x-(diisopropyl)verdazyl radical (IX) was prepared, where the two radicals are connected ia a conjugated divinylene linker. The neutral radical donors stack in a more favourable head-to-head arrangement but the bulky isopropyl groups prevent the donor radicals from stacking close enough together to facilitate good orbital overlap. [Molecular diagram available in pdf].

A Study of Ordered Gene Problems Featuring DNA Error Correction and DNA Fragment Assembly with a Variety of Heuristics, Genetic Algorithm Variations, and Dynamic Representations

Ordered gene problems are a very common classification of optimization problems. Because of their popularity countless algorithms have been developed in an attempt to find high quality solutions to the problems. It is also common to see many different types of problems reduced to ordered gene style problems as there are many popular heuristics and metaheuristics for them due to their popularity. Multiple ordered gene problems are studied, namely, the travelling salesman problem, bin packing problem, and graph colouring problem. In addition, two bioinformatics problems not traditionally seen as ordered gene problems are studied: DNA error correction and DNA fragment assembly. These problems are studied with multiple variations and combinations of heuristics and metaheuristics with two distinct types or representations. The majority of the algorithms are built around the Recentering- Restarting Genetic Algorithm. The algorithm variations were successful on all problems studied, and particularly for the two bioinformatics problems. For DNA Error Correction multiple cases were found with 100% of the codes being corrected. The algorithm variations were also able to beat all other state-of-the-art DNA Fragment Assemblers on 13 out of 16 benchmark problem instances.

Letter - E.C. Schmon to Arthur A. Schmon, 27 March 1920

The letter describes some difficulty Arthur has had with a man named Walter. She also describes her activities for the day. Eleanore Celeste mentions all of the things she is packing to bring to Shelter Bay when she leaves to be with Arthur. Accompanying this letter is a letter to "Aunt Lessie". It appears to be signed "Love from all and more than ever from Pal". This letter discusses his writing and soon sending it to a magazine and boxing gloves he has just purchased.

Letter - E.C. Schmon to Arthur A. Schmon, 10 March 1920

Eleanore Celeste is packing up their things for the move. She has been to a Lenten Service and had a visit with Miss Ketcham. The letter is labelled number 148.

Letter - E.C. Schmon to Arthur A. Schmon, 28 March 1920

Eleanore Celeste has returned from an evening church service and is now packing up her family home. Her family is moving from the city to a "suburban town".

Meat Packers Council of Canada records, 1954-1961

The Meat Packers Council of Canada was originally founded in 1919 in an effort to encourage farmers to produce better quality livestock. Originally known as the Industrial and Development Council of Canadian Meat Packers, charter members included Harris Abattoir Co. Ltd.; William Davies Co. Ltd.; Swift Canadian Co. Ltd.; Gunns Ltd.; Canadian Packing Co. Ltd.; Puddy’s Ltd.; F.W. Fearman Co.; Ingersol Packing Co. Ltd.; Whyte Packing Co. Ltd.; Gallagher-Holman & Lafrance Co. Ltd.; Gordon – Fronside and Fares Packers Ltd.; Wilson Canadian Co. Ltd.; and Armour & Co. Most of these firms were based in Ontario, but the Council’s operations were soon expanded with the opening of a western and eastern field office. The Council was incorporated in 1961. In 1980, the name changed to the Canadian Meat Council.

Johns-Manville (Canada) records, 1949-1977 (non-inclusive).

The Johns-Manville Company was founded in 1901with the merging of the H.W. Johns Manufacturing Company and the Manville Covering Company. Both companies made building materials using asbestos. The new company was based in New York, New York, and made products such as insulation and roofing materials, automotive sheet packing for cylinders, asbestos/cement, acoustical and magnesia products. Significant restructuring has occurred over the years as the company shifted from production of asbestos products to other types of building materials, such as fibre glass and forest products. Since 2001, the Johns-Manville Company has been owned by Berkshire Hathaway. The company began operations in Canada in 1918 in Asbestos, Quebec, where the Jeffrey Asbestos Mine was located. A Canadian plant opened in Port Union, Scarborough Township, in 1956, and another in North Bay, Ontario, in 1957. Both of these plants have since closed. The company currently has two plants in Canada, in Innisfail, Alberta, and Cornwall, Ontario.