Geochemistry and mineralogical association of heavy metal contaminants in fine grained sediment, Welland River, Southern Ontario /

This investigation of geochemistry and mineralogy of heavy metals in fine grained (<63^m) sediment of the Welland River was imdertaken to: 1) describe metal dispersion patterns relative to a source, identify minerals forming and existing at the outfall region and relate sediment particle size to chemistry; 2) to delineate sample handling, preparation and evaluate, modify and develop analytical methods for heavy metal analysis of complex environmental samples. Ajoint project between Brock University and Geoscience Laboratories was initiated to test a contaminated site of the Welland River at the base of Atlas Speciality Steels Co. Methods were developed and utilized for particle size separation and two acid extraction techniques: 1) Partial extraction; 2) Total extraction. The mineralogical assessment identified calcite, dolomite, quartz and clays. These minerals are typical of the carbonate-shale rock basement of the Niagara Peninsula. Minerals such as, mullite and ferrocolumbite were found at the outfall region. These are not typical of the local geology and are generally associated with industrial pollutants. Partial and total extraction techniques were used to characterize the sediments based on chemical distribution, elemental behaviour and analytical differences. The majority of elements were lower in concentration in the partial extraction technique; suggesting these elements are bound in an acid extractable phase (exchangeable, organic and carbonate phases). The total extraction technique yielded higher elemental concentrations taking difficult oxides and silicates into solution. Geochemical analyses of grain size separates revealed that heavy metal (Co, Ni, V, Mn, Fe, Ba) concentrations did not increase with decreasing grain size. This is a function of the anthropogenic mill scale input into the river. The background elements (Sc, Y, Sr, Mg, Al and Ti) showed an increase in concentration to the finest grain size suggesting that it is directly related to the local mineralogy and geology. Dispersion patterns ofmetals fall into two distinct categories: 1) the heavy metals (Co, Cu, Ni, Zn, V and Cr), and 2) the background elements (Be, Sc, Y, Sr, Al and Ti). The heavy metals show a marked increase in the outfall region, while the background elements show a significant decrease at the outfall. This pattern is attributed to a "dilution effect" ofthe natural sediments by the anthropogenic mill scale sediments. Multivariant statistical analysis and correlation coefficient matrix results clearly support these results and conclusions. These results indicate the outfall region ofthe Welland River is highly contaminated with to heavy metals from the industrialized area of Welland. A short distance downstream, the metal concentrations return to baseline geochemical levels. It appears, contaminants rapidly come out of suspension and are deposited in close proximity to the source. Therefore, it is likely that dredging the sediment from the river may cause resuspension of contaminated sediments, but may not distribute the sediment as far as initially anticipated.

Pollen and grain size records in abyssal sediments of the northwest Pacific Ocean as proxies of Plio-Pleistocene climate change /

A distinctive period of global change occurred during the PUocene between the warm Miocene and subsequent Quaternary cooling. Samples from Ocean Drilling Project Site 11 79 (-5586 mbsl, 41°4'N, 159°57'E), Site 881 (-5765 mbsl, 47°6.133'N, 161°29.490'E) and Site 882 (-3255 mbsl, 50°22'N, 167°36'E) were studied to determine the magnitude and composition ofterrigenous flux to the western mid-latitude North Pacific and its relation to climate change in East Asia since the mid-Pliocene. Dust-sized particles (including pollen), sourced from the arid regions and loess plateaus in East Asia are entrained by prevailing westerly winds and transported to the midlatitude northwest North Pacific Ocean. This is recorded by peaks in the total concentration of pollen and spores, as well as the mean grain size of allochthonous and autochthonous silicate material in abyssal marine sediments. Aridification of the Asian interior due to the phased uplift of the Himalayan-Tibetan Plateau created the modem East Asian Monsoon system dominated by a strengthening of the winter monsoon. The winter monsoon is further enhanced during glacials due to the expansion of desert and steppe environments at the expense ofwoodlands and forests recorded by the composition of palynological assemblages. The late Pliocene-Pleistocene glacials at ODP Sites 1 179, 881, and 882 are characterized by increases in grain size, magnetic susceptibility, pollen and spore concentrations around 3.5-3.3, 2.6-2.4, 1.7-1.6, and 0.9-0.7 Ma (ages based on magnetostratigraphic and biostratigraphic datums). The peaks during these times are relatively rich in pollen taxa derived primarily from steppe and boreal vegetation zones, recording cool, dry climates. The overall size increase of sediment and abundance of terrestrial palynomorphs record enhanced wind strength. The increase in magnitude of pollen and spore concentrations as well as grain size record global cooling and Northern Hemisphere glaciation. The peaks in grain size as well as pollen and spore abundance in marine sediments correlate with the mean grain size of loess in East Asia, consistent with the deflation of unarmoured surfaces during glacials. The transport of limiting nutrients to marine environments enhanced sea surface productivity and increased the rate of sediment accumulation.

Livestock Behavior as Related to Handling Facilities Design

This article is from the International Journal for the Study of Animal Problems, Vol. 1, No. 1, 1980. The article focuses on the "behavior of different species of livestock as well as different breeds" to aid with the design of handling facilities.

Serpentine Cattle Chute Gives Handling Advantages

The article discusses the efficiency of a curved chute as opposed to a straight chute when leading cattle into a conveyor restrainer. The article was published in The National Provisioner in 1984.

Assessment of Stress During Handling and Transport

The article focuses on assessing the stress levels of animals when transported and handled. The paper was presented at a symposium titled Effects of Stress in Farm Animals at the American Society of Animal Science 87th annual meeting, July 1995.

Livestock Handling Guide

The contents of the pamphlet include: Handling Stress, Understanding Animal Psychology, Handling Facility Design Tips, Bruise Losses By Species, Preventing Bruises, Loading Chute Recommendations.

Progress and Challenges in Animal Handling and Slaughter in the U.S.

The article discusses the McDonald's Corporation audit and the ways to improve the handling of livestock on the way to slaughter.

Safe Handling of Large Animals

The article discusses improving welfare by reducing fear by studying: Animal Sensory Perception, Animal Behavior Patterns, Animal Habituation and Temperament, Effects of Previous Handling, Training Animals, Training Time and Temperament, Genetic Effects on Handling, Handling of escaped Animals, Facilities, Aggression in Grazing Animals, Inherent Danger of Large Animals, Cattle and Car Accidents.

Designing Meat Packing Plant Handling Facilities for Cattle and Hogs

The focus is on design, more specifically, "animal handling facilities which are labor saving and reduce bruise losses". The article studies: Unloading Chutes, Stockyard Design, Hog Plant Stockyard, General Purpose Small Stockyard, Beef Stockyard, Cattle Crowding Pens, Hog Crowding Pens, Slopes in Chutes and Crowding Pens, Single File Chutes General Recommendations, Single File Chutes for Cattle, Slaughter Restrainers,

Reduce Stress of Handling to Improve Productivity of Livestock

The article focuses on stress factors, which include: Genetic Background, Individual Differences, Past Experiences. The conclusion of the article states "reducing handling stress of animals will improve their weight gain, reproductive performance, and ability to resist disease".

Livestock Handling Needs Improvement

The article discusses problems with the handling of livestock and the conclusion of the article states "rough handling of livestock is not only inhumane, but can cause excessive losses due to sickness and slower growth...careful handling of livestock in all phases of production is prerequisite to a profitable business".

Double Rail Restrainer for Handling Beef Cattle

The summary of the article reads "A new double rail conveyor restrainer for handling cattle at the slaughter plant is described. It has improved safety and ergonomics compared to the V restrainer conveyor it replaces. Cattle ride astride a moving conveyor. This design could also be adapted for veterinary work."

Good Management Practice for Animal Handling and Stunning

On the front cover is a handwritten note that reads "original guidelines I used when the McDonalds audits were started in 1999".

Chapter 10: Antemortem Handling and Welfare

The chapter discusses the following topics: Continuous Measurement and Monitoring, Meat Quality Correlations, How Stressful is Slaughter?, Causes of Poor Welfare Audit Scores, Animal Vision, Hearing and Smell, Basic Handling Principles, Handler Movement Patterns, Design of Handling Facilities, Design and Operation of Restraint Devices, Stunning, Stunning Method and Blood-Splash, Bruising and Meat Quality.

The Design and Construction of Facilities for Handling Cattle

The article focuses on the following: Cattle Perception, How to prevent Balking, Solid Fences, Flight Zone, Curved Race more Efficient, Curved Race and Crowd Pen Dimensions, Loading Ramps, Working Corral for a Large Ranch, Squeeze Chutes and Headgates, Calf Tables, Artificial Insemination Chute, New Restraint Ideas, Dipping Vats, Bruise and Injury Prevention, Washable Facilities.