Usability and Security in Medication Administration Applications

The traditional process of filling the medicine trays and dispensing the medicines to the patients in the hospitals is manually done by reading the printed paper medicine chart. This process can be very strenuous and error-prone, given the number of sub-tasks involved in the entire workflow and the dynamic nature of the work environment. Therefore, efforts are being made to digitalise the medication dispensation process by introducing a mobile application called Smart Dosing application. The introduction of the Smart Dosing application into hospital workflow raises security concerns and calls for security requirement analysis. This thesis is written as a part of the smart medication management project at Embedded Systems Laboratory, A° bo Akademi University. The project aims at digitising the medicine dispensation process by integrating information from various health systems, and making them available through the Smart Dosing application. This application is intended to be used on a tablet computer which will be incorporated on the medicine tray. The smart medication management system include the medicine tray, the tablet device, and the medicine cups with the cup holders. Introducing the Smart Dosing application should not interfere with the existing process carried out by the nurses, and it should result in minimum modifications to the tray design and the workflow. The re-designing of the tray would include integrating the device running the application into the tray in a manner that the users find it convenient and make less errors while using it. The main objective of this thesis is to enhance the security of the hospital medicine dispensation process by ensuring the security of the Smart Dosing application at various levels. The methods used for writing this thesis was to analyse how the tray design, and the application user interface design can help prevent errors and what secure technology choices have to be made before starting the development of the next prototype of the Smart Dosing application. The thesis first understands the context of the use of the application, the end-users and their needs, and the errors made in everyday medication dispensation workflow by continuous discussions with the nursing researchers. The thesis then gains insight to the vulnerabilities, threats and risks of using mobile application in hospital medication dispensation process. The resulting list of security requirements was made by analysing the previously built prototype of the Smart Dosing application, continuous interactive discussions with the nursing researchers, and an exhaustive stateof- the-art study on security risks of using mobile applications in hospital context. The thesis also uses Octave Allegro method to make the readers understand the likelihood and impact of threats, and what steps should be taken to prevent or fix them. The security requirements obtained, as a result, are a starting point for the developers of the next iteration of the prototype for the Smart Dosing application.

Usability and Security in Medication. Administration Applications

The traditional process of filling the medicine trays and dispensing the medicines to the patients in the hospitals is manually done by reading the printed paper medicinechart. This process can be very strenuous and error-prone, given the number of sub-tasksinvolved in the entire workflow and the dynamic nature of the work environment.Therefore, efforts are being made to digitalise the medication dispensation process byintroducing a mobile application called Smart Dosing application. The introduction ofthe Smart Dosing application into hospital workflow raises security concerns and callsfor security requirement analysis. This thesis is written as a part of the smart medication management project at EmbeddedSystems Laboratory, A˚bo Akademi University. The project aims at digitising the medicine dispensation process by integrating information from various health systems, and making them available through the Smart Dosing application. This application is intended to be used on a tablet computer which will be incorporated on the medicine tray. The smart medication management system include the medicine tray, the tablet device, and the medicine cups with the cup holders. Introducing the Smart Dosing application should not interfere with the existing process carried out by the nurses, and it should result in minimum modifications to the tray design and the workflow. The re-designing of the tray would include integrating the device running the application into the tray in a manner that the users find it convenient and make less errors while using it. The main objective of this thesis is to enhance the security of the hospital medicine dispensation process by ensuring the security of the Smart Dosing application at various levels. The methods used for writing this thesis was to analyse how the tray design, and the application user interface design can help prevent errors and what secure technology choices have to be made before starting the development of the next prototype of the Smart Dosing application. The thesis first understands the context of the use of the application, the end-users and their needs, and the errors made in everyday medication dispensation workflow by continuous discussions with the nursing researchers. The thesis then gains insight to the vulnerabilities, threats and risks of using mobile application in hospital medication dispensation process. The resulting list of security requirements was made by analysing the previously built prototype of the Smart Dosing application, continuous interactive discussions with the nursing researchers, and an exhaustive state-of-the-art study on security risks of using mobile applications in hospital context. The thesis also uses Octave Allegro method to make the readers understand the likelihood and impact of threats, and what steps should be taken to prevent or fix them. The security requirements obtained, as a result, are a starting point for the developers of the next iteration of the prototype for the Smart Dosing application.

Front end development for building automation systems using JavaScript Frameworks

Automation technologies are widely acclaimed to have the potential to significantly reduce energy consumption and energy-related costs in buildings. However, despite the abundance of commercially available technologies, automation in domestic environments keep on meeting commercial failures. The main reason for this is the development process that is used to build the automation applications, which tend to focus more on technical aspects rather than on the needs and limitations of the users. An instance of this problem is the complex and poorly designed home automation front-ends that deter customers from investing in a home automation product. On the other hand, developing a usable and interactive interface is a complicated task for developers due to the multidisciplinary challenges that need to be identified and solved. In this context, the current research work investigates the different design problems associated with developing a home automation interface as well as the existing design solutions that are applied to these problems. The Qualitative Data Analysis approach was used for collecting data from research papers and the open coding process was used to cluster the findings. From the analysis of the data collected, requirements for designing the interface were derived. A home energy management functionality for a Web-based home automation front-end was developed as a proof-of-concept and a user evaluation was used to assess the usability of the interface. The results of the evaluation showed that this holistic approach to designing interfaces improved its usability which increases the chances of its commercial success.

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Embedding sustainability into the new computer science curriculum for English schools

The primary goals of this study are to: embed sustainable concepts of energy consumption into certain part of existing Computer Science curriculum for English schools; investigate how to motivate 7-to-11 years old kids to learn these concepts; promote responsive ICT (Information and Communications Technology) use by these kids in their daily life; raise their awareness of today’s ecological challenges. Sustainability-related ICT lessons developed aim to provoke computational thinking and creativity to foster understanding of environmental impact of ICT and positive environmental impact of small changes in user energy consumption behaviour. The importance of including sustainability into the Computer Science curriculum is due to the fact that ICT is both a solution and one of the causes of current world ecological problems. This research follows Agile software development methodology. In order to achieve the aforementioned goals, sustainability requirements, curriculum requirements and technical requirements are firstly analysed. Secondly, the web-based user interface is designed. In parallel, a set of three online lessons (video, slideshow and game) is created for the website GreenICTKids.com taking into account several green design patterns. Finally, the evaluation phase involves the collection of adults’ and kids’ feedback on the following: user interface; contents; user interaction; impacts on the kids’ sustainability awareness and on the kids’ behaviour with technologies. In conclusion, a list of research outcomes is as follows: 92% of the adults learnt more about energy consumption; 80% of the kids are motivated to learn about energy consumption and found the website easy to use; 100% of the kids understood the contents and liked website’s visual aspect; 100% of the kids will try to apply in their daily life what they learnt through the online lessons.

Käytettävyyssuunnittelun teoria ja käytäntö: Tapaustutkimus huonekalujen verkkokaupasta

Käytettävien ohjelmistojen suunnittelu tuo hyötyjä loppukäyttäjälle sekä muille sidosryhmille. Verkkokaupassa käytettävyys on elintärkeää, koska asiakkaat vaihtavat helposti seuraavalle sivustolle, mikäli he eivät löydä etsimäänsä. Tutkimusten mukaan käytettävyys vaikuttaa ostopäätöksen tekemiseen. Lisäksi käytettävyydellä on merkitystä asiakastyytyväisyyteen, joka taas vaikuttaa asiakasuskollisuuteen. Tässä tutkielmassa tutkittiin, miten käytettävyyttä suunnitellaan käytännössä verrattuna teoreettisiin suosituksiin. Tapaustutkimuksen kohteena oli huonekaluja myyvän kansainvälisen yrityksen verkkokaupan uudistamiseen tähtäävä projekti. Uudistamistarve nousi aikaisemman verkkokauppaversion puutteellisesta käytettävyydestä. Projekti toteutettiin ketterällä Scrum-menetelmällä. Empiirinen aineisto kerättiin puolistrukturoitujen haastattelujen avulla. Haastateltavat olivat käyttökokemuksen suunnitteluun osallistuvia henkilöitä. Haastattelujen teemat laadittiin teoreettisen aineiston pohjalta. Teoreettisessa osuudessa tutkittiin käytettävyyden suunnitteluun liittyviä periaatteita, prosessia ja menetelmiä. Aikaisemmasta tutkimuksesta löydettiin 12 periaatetta, jotka tukevat ja luonnehtivat käyttäjäkeskeistä suunnittelua. Käytettävyyttä suunnitellaan käyttäjäkeskeisen prosessin avulla. Eri prosessimallit pitivät keskeisinä asioina käyttökontekstin määrittelyä ja ymmärtämistä, mitattavia käytettävyysvaatimuksia, suunnitteluratkaisujen empiiristä arviointia sekä suunnitteluprosessin iteratiivisuutta. Lisäksi tarkasteltiin, mitä suunnittelumenetelmiä tutkijat ehdottavat käytettävyyden suunnitteluun ja mitä kyselytutkimusten perusteella todellisuudessa käytetään. Verkkokauppaprojektissa käytettävyyden suunnittelu erosi osittain teoreettisista suosituksista. Käyttökontekstitietoa ei ollut kaikilla projektiin osallistuvilla, eikä käytettävyysvaatimuksia ollut asetettu teorian tarkoittamalla tavalla. Yhtäläisyyksiäkin löytyi. Verkkokauppaprojektissa suunnitteluratkaisuja arvioitiin empiirisesti todellisten käyttäjien edustajien avulla. Suunnitteluprosessi oli iteratiivinen eli suunnitteluratkaisuja oltiin valmiita muuttamaan arvioinnin tuloksena. Tutkimuksen perusteella suositellaan, että verkkokauppaprojektissa parannettaisiin kommunikointia, koska käyttökontekstitieto ei saavuttanut kaikkia projektissa työskenteleviä. Teorian tulisi entisestään korostaa kommunikoinnin tärkeyttä. Tutkimuksen perusteella esitetään myös, että teoria ohjaisi paremmin vaatimusmäärittelyjen tekemiseen käytännössä. Avainsanat: Käytettävyys, käyttäjäkeskeinen suunnittelu, käytettävyyden periaatteet, käytettävyyden suunnittelumenetelmät, ketterä ohjelmistokehitys, tapaustutkimus

Ketterän ohjelmistokehittämisen hyödyntäminen käyttöliittymäkehityksessä asiakkaiden todellisen tarpeen ymmärtämiseksi

Työn tavoitteena oli toimintatutkimuksen kautta tutkia ketterän ohjelmistokehityksen keinoin toteutetun käyttöliittymäkehityksen kykyä vastata asiakkaiden todellisiin tarpeisiin. Työssä haettiin tapaustutkimusyritykselle olemassa olevan työkalun uuden version käyttöliittymän toteutusvaihtoehtoja ja toteutettiin korkean tarkkuuden prototyyppejä näitä hyödyntäen. Ketterän ohjelmistokehityksen arvot ja periaatteet soveltuivat kehitysprosessissa käytettäviksi erinomaisesti. Iteratiivinen lähestymistapa kehitykseen ja läheinen yhteistyö tapaustutkimusyrityksen ja kandidaatintyöntekijän kanssa mahdollistivat yrityksen odotusten täyttämisen. Työkalun käyttöliittymä saatettiin tasolle, joka mahdollistaa jatkokehittämisen aloituksen. Kattavamman testauttamisen sisällyttäminen kehitysprosessiin olisi edesauttanut vielä paremman lopputuloksen saavuttamista.