R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Integration of learning supportive applications into the development of the e-portfolio construction process

The portfolio as a means of demonstrating personal skills has lately been gaining prominence among technology students. This is partially due to the introduction of electronic portfolios, or e-portfolios. As platforms for e-portfolio management with different approaches have been introduced, the learning cycle, traditional portfolio pedagogy, and learner centricity have sometimes been forgotten, and as a result, the tools have been used for the most part as data depositories. The purpose of this thesis is to show how the construction of e-portfolios of IT students can be supported by institutions through the usage of different tools that relate to study advising, teaching, and learning. The construction process is presented as a cycle based on learning theories. Actions related to the various phases of the e-portfolio construction process are supported by the implementation of software applications. To maximize learner-centricity and minimize the intervention of the institution, the evaluated and controlled actions for these practices can be separated from the e-portfolios, leaving the construction of the e-portfolio to students. The main contributions of this thesis are the implemented applications, which can be considered to support the e-portfolio construction by assisting in planning, organizing, and reflecting activities. Eventually, this supports the students in their construction of better and more extensive e-portfolios. The implemented tools include 1) JobSkillSearcher to help students’ recognition of the demands of the ICT industry regarding skills, 2) WebTUTOR to support students’ personal study planning, 3) Learning Styles to determine students' learning styles, and 4) MyPeerReview to provide a platform on which to carry out anonymous peer review processes in courses. The most visible outcome concerning the e-portfolio is its representation, meaning that one can use it to demonstrate personal achievements at the time of seeking a job and gaining employment. Testing the tools and the selected open-source e-portfolio application indicates that the degree of richness of e-portfolio content can be increased by using the implemented applications.

Automatic recognition of fish from video sequences

The problem of automatic recognition of the fish from the video sequences is discussed in this Master’s Thesis. This is a very urgent issue for many organizations engaged in fish farming in Finland and Russia because the process of automation control and counting of individual species is turning point in the industry. The difficulties and the specific features of the problem have been identified in order to find a solution and propose some recommendations for the components of the automated fish recognition system. Methods such as background subtraction, Kalman filtering and Viola-Jones method were implemented during this work for detection, tracking and estimation of fish parameters. Both the results of the experiments and the choice of the appropriate methods strongly depend on the quality and the type of a video which is used as an input data. Practical experiments have demonstrated that not all methods can produce good results for real data, whereas on synthetic data they operate satisfactorily.

Common dyslipidemias, high lipoprotein(a) concentrations and endothelial function in the children of the STRIP study families

Extreme lipid values predisposing on illnesses are dyslipidemias. Dyslipidemias evolve in early childhood, but their significance or persistency is not well known. Common dyslipidemias may aggregate in the same families. This thesis is a part of the longitudinal randomized Special Turku coronary Risk factor Intervention Project STRIP, in which 1054 families with six months old children were randomized to a control or to an intervention group. The family lipid data from the first 11 years was used. Fasting samples at the age of five years defined the lipid phenotypes. The dyslipidemias coexisting in the parent and the child were studied. At the age of 11 years 402 children participated artery ultrasound studies. The significance of the childhood dyslipidemias and lipoprotein(a) concentration on endothelial function was evaluated with the flow mediated arterial dilatation test. Frequently elevated non-HDL cholesterol concentration from one to seven-year-old children associated to similar parental dyslipidemia that improved the predictive value of the childhood sample. The familial combinations were hypercholesterolemia (2.3%), hypertriglyceridemia (2.0%), familial combined hyperlipidemia (1.8%), and isolated low HDL-cholesterol concentration (1.4%). Combined hyperlipidemia in a parent predicted most frequently the child’s hyperlipidemia. High lipoprotein(a) concentration aggregated in some families and associated to childhood attenuated brachial artery dilatation. Hypercholesterolemia and high lipoprotein(a) concentration at five years of age predicted attenuated dilatation. This study demonstrated that parental dyslipidemias and high lipoprotein(a) concentration help to find early childhood dyslipidemias. The association of hypercholesterolemia and lipoprotein(a) concentration with endothelial function emphasizes the importance of the early recognition of the dyslipidemias.

Time consumption analysis of the mechanized cut-to-length harvesting system

[Abstract]

Competitiveness Comparison of the Electricity Production Alternatives

The competitiveness comparison is carried out for merely electricity producing alternatives. In Finland, further construction of CHP (combined heat and power) power plants will continue and cover part of the future power supply deficit, but also new condensing power plant capacity will be needed. The following types of power plants are studied: - nuclear power plant, - coal-fired condensing power plant - combined cycle gas turbine plant, - peat-fired condensing power plant. - wood-fired condensing power plant - wind power plant The calculations have been made using the annuity method with a real interest rate of 5 % perannum and with a fixed price level as of March 2003. With the annual full load utilization time of 8000 hours the nuclear electricity would cost 23,7 ¤/MWh, the gas based electricity 32,3 ¤/MWh and coal based electricity 28,1 ¤/MWh. If the influence of emission trading is taken into account,the advantage of the nuclear power will still be improved. Inorder to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive tothe changes of the uranium price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk.

Welding time models for cost calculations in the early stages of the design process

It is generally accepted that between 70 and 80% of manufacturing costs can be attributed to design. Nevertheless, it is difficult for the designer to estimate manufacturing costs accurately, especially when alternative constructions are compared at the conceptual design phase, because of the lack of cost information and appropriate tools. In general, previous reports concerning optimisation of a welded structure have used the mass of the product as the basis for the cost comparison. However, it can easily be shown using a simple example that the use of product mass as the sole manufacturing cost estimator is unsatisfactory. This study describes a method of formulating welding time models for cost calculation, and presents the results of the models for particular sections, based on typical costs in Finland. This was achieved by collecting information concerning welded products from different companies. The data included 71 different welded assemblies taken from the mechanical engineering and construction industries. The welded assemblies contained in total 1 589 welded parts, 4 257 separate welds, and a total welded length of 3 188 metres. The data were modelled for statistical calculations, and models of welding time were derived by using linear regression analysis. Themodels were tested by using appropriate statistical methods, and were found to be accurate. General welding time models have been developed, valid for welding in Finland, as well as specific, more accurate models for particular companies. The models are presented in such a form that they can be used easily by a designer, enabling the cost calculation to be automated.

The effect of the birth hospital and the time of birth on the outcome of Finnish very preterm infants

The purpose of this study was to evaluate the effect of the birth hospital and the time of birth on mortality and the long-term outcome of Finnish very low birth weight (VLBW) or very low gestational age (VLGA) infants. This study included all Finnish VLBW/VLGA infants born at <32 gestational weeks or with a birth weight of ≤1500g, and controls born full-term and healthy. In the first part of the study, the mortality of VLBW/VLGA infants born in 2000–2003 was studied. The second part of the study consisted of a five-year follow-up of VLBW/VLGA infants born in 2001–2002. The study was performed using data from parental questionnaires and several registers. The one-year mortality rate was 11% for live-born VLBW/VLGA infants, 22% for live-born and stillborn VLBW/VLGA infants, and 0% for the controls. In live-born and in all (including stillbirths) VLBW/VLGA infants, the adjusted mortality was lower among those born in level III hospitals compared with level II hospitals. Mortality rates of live-born VLBW/VLGA infants differed according to the university hospital district where the birth hospital was located, but there were no differences in mortality between the districts when stillborn infants were included. There was a trend towards lower mortality rates in VLBW/VLGA infants born during office hours compared with those born outside office hours (night time, weekends, and public holidays). When stillborn infants were included, this difference according to the time of birth was significant. Among five-year-old VLBW/VLGA children, morbidity, use of health care resources, and problems in behaviour and development were more common in comparison with the controls. The health-related quality of life of the surviving VLBW/VLGA children was good but, statistically, it was significantly lower than among the controls. The median and the mean number of quality-adjusted life-years were 4.6 and 3.6 out of a maximum five years for all VLBW/VLGA children. For the controls, the median was 4.8 and the mean was 4.9. Morbidity rates, the use of health care resources, and the mean quality-adjusted life-years differed for VLBW/VLGA children according to the university hospital district of birth. However, the time of birth, the birth hospital level or university hospital district were not associated with the health-related quality of life, nor with behavioural and developmental scores of the survivors at the age of five years. In conclusion, the decreased mortality in level III hospitals was not gained at the expense of long-term problems. The results indicate that VLBW/VLGA deliveries should be centralized to level III hospitals and the regional differences in the treatment practices should further be clarified. A long-term follow-up on the outcome of VLBW/VLGA infants is important in order to recognize the critical periods of care and to optimise the care. In the future, quality-adjusted life-years can be used as a uniform measure for comparing the effectiveness of care between VLBW/VLGA infants and different patient groups

Unca Don and Unca Scrooge’s Guide to History. Representations of the Past in the Disney Comics of Don Rosa

This thesis studies the various forms and layers of representations of the past that can be found in the Disney comics of Don Rosa. To stay true to the legacy of renowned comic book artist Carl Barks, Rosa has stopped time in the duck universe to the 1950’s: the decade when Barks created his most noted stories. There is a special feel of historicalness in Rosa’s duck stories, as his characters recall events that occurred in both Rosa’s own stories as well as Barks’. Rosa has shed new light to the past of the characters by writing and illustrating the history of Scrooge McDuck, one of the most beloved Disney characters. Rosa is also adamant that the historical facts used in his stories are always correct and based on thorough research. The methodological tools used in the analysis of the comics come from the fields of comic book studies, film theory, and history culture. Film and comics are recognized by many scholars as very similar media, which share elements that make them comparable in many ways. This thesis utilizes studies on historical film, narrative and genre, which provide valuable insight and comparisons for analysis. The thesis consists of three main chapters, the first of which deconstructs the duck universe in the stories in order to understand how the historicalness in them is created,and which outside elements might affect them, including the genre of Disney comics, publishers, and the legacy of Barks. The next chapter focuses on The Life and Times of Scrooge McDuck series, i.e. the stories which are located in the past. Such stories feature similar representations of history as for example Westerns. They also compress and alter history to meet the restrictions of the medium of comics. The last part focuses on the adventure stories which draw inspiration from for example mythology, and take the characters to strange and mystical, but yet historical worlds. Such treasure-hunting stories show similarity to the action-adventure genre in film and for example their stereotypical representations of foreign cultures. Finally, the chapter addresses the problematic of historical fiction and its capability to write history.

Economic Geographical Analysis of The Finnish Paper Industry

The purpose of this academic economic geographical dissertation is to study and describe how competitiveness in the Finnish paper industry has developed during 2001–2008. During these years, the Finnish paper industry has faced economically challenging times. This dissertation attempts to fill the existing gap between theoretical and empirical discussions concerning economic geographical issues in the paper industry. The main research questions are: How have the supply chain costs and margins developed during 2001–2008? How do sales prices, transportation, and fixed and variable costs correlate with gross margins in a spatial context? The research object for this case study is a typical large Finnish paper mill that exports over 90 % of its production. The economic longitudinal research data were obtained from the case mill’s controlled economic system and, correlation (R2) analysis was used as the main research method. The time series data cover monthly economic and manufacturing observations from the mill from 2001 to 2008. The study reveals the development of prices, costs and transportation in the case mill, and it shows how economic variables correlate with the paper mills’ gross margins in various markets in Europe. The research methods of economic geography offer perspectives that pay attention to the spatial (market) heterogeneity. This type of research has been quite scarce in the research tradition of Finnish economic geography and supply chain management. This case study gives new insight into the research tradition of Finnish economic geography and supply chain management and its applications. As a concrete empirical result, this dissertation states that the competitive advantages of the Finnish paper industry were significantly weakened during 2001–2008 by low paper prices, costly manufacturing and expensive transportation. Statistical analysis expose that, in several important markets, transport costs lower gross margins as much as decreasing paper prices, which was a new finding. Paper companies should continuously pay attention to lowering manufacturing and transporting costs to achieve more profitable economic performance. The location of a mill being far from markets clearly has an economic impact on paper manufacturing, as paper demand is decreasing and oversupply is pressuring paper prices down. Therefore, market and economic forecasting in the paper industry is advantageous at the country and product levels while simultaneously taking into account the economic geographically specific dimensions.

Winning time in land warfare : a reading of the classical strategists prior to the age of mechanization

We live in an age where rationalization and demands of efficiency taint every aspect of our lives both as individuals and as a society. Even warfare cannot escape the increased speed of human interaction. Time is a resource to be managed. It has to be optimized, saved and won in military affairs as well. The purpose of this research paper is to analyze the dogmatic texts of military thought to search for answers what the classics of strategy saw in the interrelations of temporality and warfare and if their thoughts remain meaningful in the contemporary conjunction. Since the way a society functions is reflected in the way it conducts its wars, there naturally are differences between an agrarian, industrial and information society. Theorists of different eras emphasize things specific to their times, but warfare, like any human interaction, is always bounded by temporality. Not only is the pace of warfare dependent on the progress of the society, but time permeates warfare in all its aspects. This research paper focuses on two specific topics that arose from the texts themselves; how should time be managed and manipulated in warfare and how to economize and “win” it from the enemy. A method where lengthy quotations are used to illustrate the main point of the strategists has been chosen for this research paper. While Clausewitz is the most prominent source of quotations, thoughts from ancient India and China are represented as well to prove that the combination of right force in the right place at the right time is still the way of the victorious. Tactics change in the course of time but the principles of strategy remain unaltered and are only adapted to suit new situations. While ancient and pre-modern societies had their focus on finding auspicious moments for battle in the flow of kronos-time based on divinities, portents and auguries, we can trace elements of manipulation of time in warfare from the earliest surviving texts. While time as a fourth dimension of the battlespace emerged only in the modern era, all through the history of military thought it has had a profound meaning. In the past time could be squandered, today it always has to be won. This paper asks the question “why”.

A Study of African American Vernacular English in Three Novels and Colloquial Finnish in their Translations – The Dark Tower II: The Drawing of the Three, A Time to Kill and Push

Pro gradu -tutkielma käsittelee afroamerikkalaisen puhekielen (African American Vernacular English, AAVE) käyttöä kolmen englanninkielisen romaanin dialogissa ja suomen yleispuhekielen käyttöä romaanien käännöksissä. Tutkimus on pääasiassa kvantitatiivinen ja deskriptiivinen. Romaanit ovat Stephen Kingin The Dark Tower II: The Drawing of the Three (1987) (Musta torni 2, Kolme korttia pakasta 2005, suom. Kari Salminen), John Grishamin A Time to Kill (1989) (On aika tappaa 1994, suom. Kimmo Linkama) ja Sapphiren Push (1996) (Precious – harlemilaistytön tarina 2010, suom. Kristiina Drews). Alkukielisten romaanien osalta Grisham ja Sapphire suosivat lauseopillisia kielenpiirteitä, kun taas King on suosinut äänteellisiä. Sen sijaan käännöksissä piirteistä yleisimpiä ovat äänteelliset ja harvinaisimpia lauseopilliset. Vaikka käännöksissä sanastolliset piirteet ovat taajaan esiintyviä, äänteellisiä piirteitä esiintyy niitä enemmän. Poikkeuksena on On aika tappaa, jossa sanastollisia piirteitä esiintyy enemmän kuin äänteellisiä. Tulos eroaa Sampo Nevalaisen vuonna 2003 tekemästä tutkimuksesta, jossa hän sai selville, että käännöksissä käytetyt piirteet olivat enimmäkseen sanastollisia, kun taas alun perin suomeksi kirjoitetussa kaunokirjallisuudessa puhekielisyyden vaikutelma saatiin aikaan pääasiassa äänteellisin keinoin. Mahdollinen selitys tässä tutkimuksessa havaitulle erolle on se, että kahdessa romaanissa esiintyvä leimallinen AAVEn käyttö on saanut kääntäjät käyttämään samanlaisia strategioita kuin suomalaiset kirjailijat murretta kirjoittaessaan.

Phenolics of the Inner Bark of Silver Birch: Characterization and Intraspecific Variation

This thesis describes work related to the in-depth characterization of the phenolic compounds of silver birch (Betula pendula) inner bark. Phenolic compounds are the most ubiquitous class of plant secondary compounds. The unifying feature of this structurally diverse group is an aromatic ring containing at least one hydroxyl group. Due to the structural diversity, phenolics have various roles in the plant defense against biotic and abiotic stresses. In addition, they can confer several health-promoting properties to humans. Furthermore, the structural diversity of this class of compounds causes challenges for their analysis. The study species in the present work, silver birch, is economically the most important hard wood species in northern Europe. Its inner bark contains a high level of phenolic compounds and it has shown one of the strongest antioxidant activities among 92 Finnish plant materials. The literature review surveys the diversity and organ specific distribution of phenolic compounds in silver birch as well as the proposed ecological functions of phenolic compounds in nature. In addition, the basis for the characterization of phenolics by mass spectrometry (MS), nuclear magnetic resonance spectroscopy (NMR), and circular dichroism spectroscopy (CD) are reviewed. The objective of the experimental work was to extract, purify, characterize, and quantify the inner bark phenolic compounds. Overall 36 compounds were characterized by MS and ultraviolet spectroscopy (UV). 24 compounds were isolated and their structures confirmed by NMR and CD spectroscopy. Five novel natural compounds were identified. Special emphasis was placed on the establishment of a method for the characterization of proanthocyanidins (PAs). Hydrophilic interaction liquid chromatography (HILIC) was utilized because of its high resolution power and predictable elution order of oligomeric and polymeric PAs according to an increasing degree of polymerization. The combination of HILIC and high-resolution MS detection allowed the identification of procyanidin (PC) polymers up to the degree of polymerization of 22. In addition, a series of oligomeric and polymeric PC monoxylosides were observed for the first time in nature. Season and genotype influenced the quantities of the main inner bark phenolics, yet qualitative differences were not observed. However, manual wounding of the inner bark induced the production of ellagitannins (ETs) in the wounded tissues, i.e. callus. Since ETs were not detected in the intact inner bark, this finding may reflect the capacity of silver birch to exploit ellagitannins in its defense.

On site measurements of DC link electrolytic capacitor bank of frequency converter using constant DC magnetization of the motor

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.