Evaluation of PostgreSQL replication and load balancing implementations

In this final project the high availability options for PostgreSQL database management system were explored and evaluated. The primary objective of the project was to find a reliable replication system and implement it to a production environment. The secondary objective was to explore different load balancing methods and compare their performance. The potential replication methods were thoroughly examined, and the most promising was implemented to a database system gathering weather information in Lithuania. The different load balancing methods were tested performance wise with different load scenarios and the results were analysed. As a result for this project a functioning PostgreSQL database replication system was built to the Lithuanian Hydrometeorological Service's headquarters, and definite guidelines for future load balancing needs were produced. This study includes the actual implementation of a replication system to a demanding production environment, but only guidelines for building a load balancing system to the same production environment.

Development of the Acoustic Emission Based Diagnostics Concept for the Rotary Lime Kiln

Reaaliaikainen, ennakoiva kunnonvalvonta on erittäin tärkeä osa modernin tehtaan tai tuotantolinjan toimintaa. Diplomityön teettäjä haluaa edelleen kehittää akustiseen emissioon perustuvaa kunnonvalvonta järjestelmäänsä, jotta siitä olisi enemmän hyötyä asiakkaalle. Diplomityö sisältää johdannonakustiseen emissioon ja akustisiin emissio sensoreihin. Työn tavoitteena oli kehittää päätöksentekojärjestelmä, jota käytettäisiin työn teettäjän valmistamien sensoreiden antaman tiedon automatisoituun analysointiin. Työssä on vertailtu kolmea eri ohjelmistotoimittajaa ja heidän ohjelmiaan, ja tehty ehdotus hankittavasta ohjelmistosta. Lisäksi työssä on kehitetty ohjeita, joiden avulla ohjelmisto ohjelmoidaan tuottamaan reaaliaikaista tietoa ja huolto-ohjeita sen käyttäjille. Lisäksi työssä annetaan ehdotuksia kunnonvalvonta- ja päätöksentekojärjestelmän edelleen kehittämiseen.

Mielipidekyselyjärjestelmän suunnittelu ja toteutus

Tämän työn tavoitteena on suunnitella yksinkertainen Internet-pohjainen mielipidekyselyjärjestelmä sekä esitellä yksityiskohtaisesti järjestelmän toteutus ja siihen liittyvät menetelmät. Menetelmistäesitellään ainoastaan ennalta valitut menetelmät järjestelmän toteutukseen, tietojen esittämiseen, esitystavan muotoiluun sekä tietojen varastointiin. Järjestelmä toteutetaan HTML- ja PHP-kielillä sekä käyttämällä CSS-menetelmän tyylimuotoiluja ja XML-kielen muotoiluun perustuvia tiedostoja tietovarastoina. Järjestelmän suunnitteluun liittyen työssä pyritään kuvaamaan järjestelmään toteutettavat kaksi erillistä käyttöliittymää, pääkäyttäjän käyttöliittymä ja normaalin käyttäjän käyttöliittymä, sekä näihin toteutettavat toiminnot. Pääkäyttäjän tärkeimmät toiminnot ovat mielipidekyselyiden luominen, käyttäjien lisääminen kyselyihin sekä kyselyiden tulosten seuranta. Normaalin käyttäjän toiminnot taas rajoittuvat kirjautumiseen ja kyselyyn vastaamiseen. Järjestelmän toteutuksen kuvauksessa kuvataan tarkasti edellä mainittujen kahden käyttöliittymän toiminnot sekä näiden toimintojen toteutustavat. Lisäksi toteutuksen kuvauksen yhteydessä määritellään tarkasti järjestelmän tietovarastoina toimivien tiedostojen sisällön muoto. Työn lopputuloksena syntyi valituilla toteutustavoilla toteutettu toimiva mielipidekyselyjärjestelmä sekä tämä järjestelmän suunnitteluun ja toteutuksen selvittämiseen keskittynyt dokumentti. Toteutetusta järjestelmästä ei tullut täydellinen vaan jatkokehityksessä voidaan harkita esimerkiksi tietokannan käyttämistä järjestelmän tietovarastoina sekä joidenkin lisäominaisuuksien toteuttamista. Tavoitteeseen päästiin kuitenkin, sillä toteutettu järjestelmä on toimiva ja käyttötarkoitukseensa sopiva.

Hiontarobotti-solun tietojärjestelmä

Hiontarobotteja käytetään nopeuttamaan hiontaprosessia ja vähentämään henkilöiden tarvetta tehdä kuluttavaa ja raskasta työtä. Yleensä hiottavat kappaleet ovat suuria, jolloin hionta robotillakin kestää kauan. Kun hiottavat kappaleet ovat pieniä, robotti hioo kappaleen nopeasti. Tällöin tarvitaan automaattinen varastointi, jotta hiontarobotti pystyy jatkamaan nopeasti seuraavan kappaleen hiontaa. Automaattinen varastointi tarvitsee tiedonhallintajärjestelmän, jolla hallitaan varastossa olevien kappaleiden tietoja. Hiottava kappale täytyy esimerkiksi pystyä tunnistamaan ennen hionnan aloittamista. Yhtenä tunnistusmenetelmänä voidaan käyttää radiotaajuudella toimivia RFID-tunnisteita. Kun kappale tunnistetaan ennen hiontaa niin voidaan varmistua, että robotti suorittaa oikean hiontaohjelman kappaleelle. Diplomityö liittyy Master Automation Groupin ensimmäiseen automaattista varastoa hyödyntävään FlexMill™-hiontarobotti-soluun. Työssä on suunniteltu ja toteutettu tietokanta ja siihen liittyvä tietojärjestelmä. Kehitettävä ohjelma toimii solun toiminnasta vastaavan soluohjaimen tiedonhallintaosana. Ohjelma hyödyntää RFID-laitteita kappaleiden tunnistuksessa.

Improving the performance of a dismounted Future Force Warrior by means of C4I2SR

This thesis comprises seven peer-reviewed articles and examines systems and applications suitable for increasing Future Force Warrior performance, minimizing collateral damage, improving situational awareness and Common Operational Picture. Based on a literature study, missing functionalities of Future Force Warrior were identified and new ideas, concepts and solutions were created as part of early stages of Systems of Systems creation. These introduced ideas have not yet been implemented or tested in combat and for this reason benefit analyses are excluded. The main results of this thesis include the following: A new networking concept, Wireless Polling Sensor Network, which is a swarm of a few Unmanned Aerial Vehicles forming an ad-hoc network and polling a large number of fixed sensor nodes. The system is more robust in a military environment than traditional Wireless Sensor Networks. A Business Process approach to Service Oriented Architecture in a tactical setting is a concept for scheduling and sharing limited resources. New components to military Service Oriented Architecture have been introduced in the thesis. Other results of the thesis include an investigation of the use of Free Space Optics in tactical communications, a proposal for tracking neutral forces, a system for upgrading simple collaboration tools for command, control and collaboration purposes, a three-level hierarchy of Future Force Warrior, and methods for reducing incidents of fratricide.

PET Imaging of Osteomyelitis. Feasibility of 18F-FDG, 68Ga-Chloride and 68Ga-DOTAVAP-P1 Tracers in Staphylococcal Bone Infections

Due to technical restrictions of the database system the title of the thesis does not show corretly on this page. Numbers in the title are in superscript. Please see the PDF-file for correct title. ---- Osteomyelitis is a progressive inflammatory disease of bone and bone marrow that results in bone destruction due to an infective microorganism, most frequently Staphylococcus aureus. Orthopaedic concern relates to the need for reconstructive and trauma-related surgical procedures in the fast grow¬ing population of fragile, aged patients, who have an increased susceptibility to surgical site infections. Depending on the type of osteomyelitis, infection may be acute or a slowly progressing, low-grade infection. Peri-implant infections lead to implant loosening. The emerging antibiotic resistance of com¬mon pathogens further complicates the situation. With current imaging methods, significant limitations exist in the diagnosing of osteomyelitis and implant-related infections. Positron emission tomography (PET) with a glucose analogue, 18F-fluoro¬deoxyglucose (18F-FDG), seems to facilitate a more accurate diagnosis of chronic osteomyelitis. The method is based on the increased glucose consumption of activated inflammatory cells. Unfortunately, 18F-FDG accumulates also in sterile inflammation regions and causes false-positive findings, for exam¬ple, due to post-operative healing processes. Therefore, there is a clinical need for new, more infection-specific tracers. In addition, it is still unknown why 18F-FDG PET imaging is less accurate in the detec¬tion of periprosthetic joint infections, most frequently due to Staphylococcus epidermidis. This doctoral thesis focused on testing novel PET tracers (68Ga-chloride and 68Ga-DOTAVAP-P1) for early detections of bone infections and evaluated the role of pathogen-related factors in the appli¬cations of 18F-FDG PET in the diagnostics of bone infections. For preclinical models of S. epidermidis and S. aureus bone/implant infections, the significance of the causative pathogen was studied with respect to 18F-FDG uptake. In a retrospective analysis of patients with confirmed bone infections, the significance of the presence or absence of positive bacterial cultures on 18F-FDG uptake was evalu¬ated. 18F-FDG and 68Ga-chloride resulted in a similar uptake in S. aureus osteomyelitic bones. However, 68Ga-chloride did not show uptake in healing bones, and therefore it may be a more-specific tracer in the early post-operative or post-traumatic phase. 68Ga-DOTAVAP-P1, a novel synthetic peptide bind¬ing to vascular adhesion protein 1 (VAP-1), was able to detect the phase of inflammation in healing bones, but the uptake of the tracer was elevated also in osteomyelitis. Low-grade peri-implant infec¬tions due to S. epidermidis were characterized by a low uptake of 18F-FDG, which reflects the virulence of the causative pathogen and the degree of leukocyte infiltration. In the clinical study, no relationship was found between the level of 18F-FDG uptake and the presence of positive or negative bacterial cul¬tures. Thus 18F-FDG PET may help to confirm metabolically active infection process in patients with culture-negative, histologically confirmed, low-grade osteomyelitis.

Implementation of an Integrated Activity-Based Costing in a Holistic Database Management System and its Implications for Operations Management

Diplomityössä on tutkittu reaaliaikaisen toimintolaskennan toteuttamista suomalaisen lasersiruja valmistavan PK-yrityksen tietojärjestelmään. Lisäksi on tarkasteltu toimintolaskennan vaikutuksia operatiiviseen toimintaan sekä toimintojen johtamiseen. Työn kirjallisuusosassa on käsitelty kirjallisuuslähteiden perusteella toimintolaskennan teorioita, laskentamenetelmiä sekä teknisessä toteutuksessa käytettyjä teknologioita. Työn toteutusosassa suunniteltiin ja toteutettiin WWW-pohjainen toimintolaskentajärjestelmä case-yrityksen kustannuslaskennan sekä taloushallinnon avuksi. Työkalu integroitiin osaksi yrityksen toiminnanohjaus- sekä valmistuksenohjausjärjestelmää. Perinteisiin toimintolaskentamallien tiedonkeruujärjestelmiin verrattuna case-yrityksessä syötteet toimintolaskentajärjestelmälle tulevat reaaliaikaisesti osana suurempaa tietojärjestelmäintegraatiota.Diplomityö pyrkii luomaan suhteen toimintolaskennan vaatimusten ja tietokantajärjestelmien välille. Toimintolaskentajärjestelmää yritys voi hyödyntää esimerkiksi tuotteiden hinnoittelussa ja kustannuslaskennassa näkemällä tuotteisiin liittyviä kustannuksia eri näkökulmista. Päätelmiä voidaan tehdä tarkkaan kustannusinformaatioon perustuen sekä määrittää järjestelmän tuottaman datan perusteella, onko tietyn projektin, asiakkuuden tai tuotteen kehittäminen taloudellisesti kannattavaa.

Improving reporting management with relational database management system

Data management consists of collecting, storing, and processing the data into the format which provides value-adding information for decision-making process. The development of data management has enabled of designing increasingly effective database management systems to support business needs. Therefore as well as advanced systems are designed for reporting purposes, also operational systems allow reporting and data analyzing. The used research method in the theory part is qualitative research and the research type in the empirical part is case study. Objective of this paper is to examine database management system requirements from reporting managements and data managements perspectives. In the theory part these requirements are identified and the appropriateness of the relational data model is evaluated. In addition key performance indicators applied to the operational monitoring of production are studied. The study has revealed that the appropriate operational key performance indicators of production takes into account time, quality, flexibility and cost aspects. Especially manufacturing efficiency has been highlighted. In this paper, reporting management is defined as a continuous monitoring of given performance measures. According to the literature review, the data management tool should cover performance, usability, reliability, scalability, and data privacy aspects in order to fulfill reporting managements demands. A framework is created for the system development phase based on requirements, and is used in the empirical part of the thesis where such a system is designed and created for reporting management purposes for a company which operates in the manufacturing industry. Relational data modeling and database architectures are utilized when the system is built for relational database platform.

Sensor communication in Smart cities and regions: An efficient IoT-based remote health monitoring system

Recent advances in Information and Communication Technology (ICT), especially those related to the Internet of Things (IoT), are facilitating smart regions. Among many services that a smart region can offer, remote health monitoring is a typical application of IoT paradigm. It offers the ability to continuously monitor and collect health-related data from a person, and transmit the data to a remote entity (for example, a healthcare service provider) for further processing and knowledge extraction. An IoT-based remote health monitoring system can be beneficial in rural areas belonging to the smart region where people have limited access to regular healthcare services. The same system can be beneficial in urban areas where hospitals can be overcrowded and where it may take substantial time to avail healthcare. However, this system may generate a large amount of data. In order to realize an efficient IoT-based remote health monitoring system, it is imperative to study the network communication needs of such a system; in particular the bandwidth requirements and the volume of generated data. The thesis studies a commercial product for remote health monitoring in Skellefteå, Sweden. Based on the results obtained via the commercial product, the thesis identified the key network-related requirements of a typical remote health monitoring system in terms of real-time event update, bandwidth requirements and data generation. Furthermore, the thesis has proposed an architecture called IReHMo - an IoT-based remote health monitoring architecture. This architecture allows users to incorporate several types of IoT devices to extend the sensing capabilities of the system. Using IReHMo, several IoT communication protocols such as HTTP, MQTT and CoAP has been evaluated and compared against each other. Results showed that CoAP is the most efficient protocol to transmit small size healthcare data to the remote servers. The combination of IReHMo and CoAP significantly reduced the required bandwidth as well as the volume of generated data (up to 56 percent) compared to the commercial product. Finally, the thesis conducted a scalability analysis, to determine the feasibility of deploying the combination of IReHMo and CoAP in large numbers in regions in north Sweden.

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Deep-hole drilling process, monitoring system and sensors modifications

 In the drilling processes and especially deep-hole drilling process, the monitoring system and having control on mechanical parameters (e.g. Force, Torque,Vibration and Acoustic emission) are essential. The main focus of this thesis work is to study the characteristics of deep-hole drilling process, and optimize the monitoring system for controlling the process. The vibration is considered as a major defect area of the deep-hole drilling process which often leads to breakage of the drill, therefore by vibration analysis and optimizing the workpiecefixture, this area is studied by finite element method and the suggestions are explained. By study on a present monitoring system, and searching on the new sensor products, the modifications and recommendations are suggested for optimize the present monitoring system for excellent performance in deep-hole drilling process research and measurements.

Database Rights in Safe European Home: The Path to More Rigorous Protection of Information

1. Introduction "The one that has compiled ... a database, the collection, securing the validity or presentation of which has required an essential investment, has the sole right to control the content over the whole work or over either a qualitatively or quantitatively substantial part of the work both by means of reproduction and by making them available to the public", Finnish Copyright Act, section 49.1 These are the laconic words that implemented the much-awaited and hotly debated European Community Directive on the legal protection of databases,2 the EDD, into Finnish Copyright legislation in 1998. Now in the year 2005, after more than half a decade of the domestic implementation it is yet uncertain as to the proper meaning and construction of the convoluted qualitative criteria the current legislation employs as a prerequisite for the database protection both in Finland and within the European Union. Further, this opaque Pan-European instrument has the potential of bringing about a number of far-reaching economic and cultural ramifications, which have remained largely uncharted or unobserved. Thus the task of understanding this particular and currently peculiarly European new intellectual property regime is twofold: first, to understand the mechanics and functioning of the EDD and second, to realise the potential and risks inherent in the new legislation in economic, cultural and societal dimensions. 2. Subject-matter of the study: basic issues The first part of the task mentioned above is straightforward: questions such as what is meant by the key concepts triggering the functioning of the EDD such as presentation of independent information, what constitutes an essential investment in acquiring data and when the reproduction of a given database reaches either qualitatively or quantitatively the threshold of substantiality before the right-holder of a database can avail himself of the remedies provided by the statutory framework remain unclear and call for a careful analysis. As for second task, it is already obvious that the practical importance of the legal protection providedby the database right is in the rapid increase. The accelerating transformationof information into digital form is an existing fact, not merely a reflection of a shape of things to come in the future. To take a simple example, the digitisation of a map, traditionally in paper format and protected by copyright, can provide the consumer a markedly easier and faster access to the wanted material and the price can be, depending on the current state of the marketplace, cheaper than that of the traditional form or even free by means of public lending libraries providing access to the information online. This also renders it possible for authors and publishers to make available and sell their products to markedly larger, international markets while the production and distribution costs can be kept at minimum due to the new electronic production, marketing and distributionmechanisms to mention a few. The troublesome side is for authors and publishers the vastly enhanced potential for illegal copying by electronic means, producing numerous virtually identical copies at speed. The fear of illegal copying canlead to stark technical protection that in turn can dampen down the demand for information goods and services and furthermore, efficiently hamper the right of access to the materials available lawfully in electronic form and thus weaken the possibility of access to information, education and the cultural heritage of anation or nations, a condition precedent for a functioning democracy. 3. Particular issues in Digital Economy and Information Networks All what is said above applies a fortiori to the databases. As a result of the ubiquity of the Internet and the pending breakthrough of Mobile Internet, peer-to-peer Networks, Localand Wide Local Area Networks, a rapidly increasing amount of information not protected by traditional copyright, such as various lists, catalogues and tables,3previously protected partially by the old section 49 of the Finnish Copyright act are available free or for consideration in the Internet, and by the same token importantly, numerous databases are collected in order to enable the marketing, tendering and selling products and services in above mentioned networks. Databases and the information embedded therein constitutes a pivotal element in virtually any commercial operation including product and service development, scientific research and education. A poignant but not instantaneously an obvious example of this is a database consisting of physical coordinates of a certain selected group of customers for marketing purposes through cellular phones, laptops and several handheld or vehicle-based devices connected online. These practical needs call for answer to a plethora of questions already outlined above: Has thecollection and securing the validity of this information required an essential input? What qualifies as a quantitatively or qualitatively significant investment? According to the Directive, the database comprises works, information and other independent materials, which are arranged in systematic or methodical way andare individually accessible by electronic or other means. Under what circumstances then, are the materials regarded as arranged in systematic or methodical way? Only when the protected elements of a database are established, the question concerning the scope of protection becomes acute. In digital context, the traditional notions of reproduction and making available to the public of digital materials seem to fit ill or lead into interpretations that are at variance with analogous domain as regards the lawful and illegal uses of information. This may well interfere with or rework the way in which the commercial and other operators have to establish themselves and function in the existing value networks of information products and services. 4. International sphere After the expiry of the implementation period for the European Community Directive on legal protection of databases, the goals of the Directive must have been consolidated into the domestic legislations of the current twenty-five Member States within the European Union. On one hand, these fundamental questions readily imply that the problemsrelated to correct construction of the Directive underlying the domestic legislation transpire the national boundaries. On the other hand, the disputes arisingon account of the implementation and interpretation of the Directive on the European level attract significance domestically. Consequently, the guidelines on correct interpretation of the Directive importing the practical, business-oriented solutions may well have application on European level. This underlines the exigency for a thorough analysis on the implications of the meaning and potential scope of Database protection in Finland and the European Union. This position hasto be contrasted with the larger, international sphere, which in early 2005 does differ markedly from European Union stance, directly having a negative effect on international trade particularly in digital content. A particular case in point is the USA, a database producer primus inter pares, not at least yet having aSui Generis database regime or its kin, while both the political and academic discourse on the matter abounds. 5. The objectives of the study The above mentioned background with its several open issues calls for the detailed study of thefollowing questions: -What is a database-at-law and when is a database protected by intellectual property rights, particularly by the European database regime?What is the international situation? -How is a database protected and what is its relation with other intellectual property regimes, particularly in the Digital context? -The opportunities and threats provided by current protection to creators, users and the society as a whole, including the commercial and cultural implications? -The difficult question on relation of the Database protection and protection of factual information as such. 6. Dsiposition The Study, in purporting to analyse and cast light on the questions above, is divided into three mainparts. The first part has the purpose of introducing the political and rationalbackground and subsequent legislative evolution path of the European database protection, reflected against the international backdrop on the issue. An introduction to databases, originally a vehicle of modern computing and information andcommunication technology, is also incorporated. The second part sets out the chosen and existing two-tier model of the database protection, reviewing both itscopyright and Sui Generis right facets in detail together with the emergent application of the machinery in real-life societal and particularly commercial context. Furthermore, a general outline of copyright, relevant in context of copyright databases is provided. For purposes of further comparison, a chapter on the precursor of Sui Generi, database right, the Nordic catalogue rule also ensues. The third and final part analyses the positive and negative impact of the database protection system and attempts to scrutinize the implications further in the future with some caveats and tentative recommendations, in particular as regards the convoluted issue concerning the IPR protection of information per se, a new tenet in the domain of copyright and related rights.

Design and Testing of Database Libraries

Nokia Push To Talk järjestelmä tarjoaa uuden kommunikointimetodin tavallisen puhelun oheen. Yksi tärkeimmistä uuden järjestelmän ominaisuuksista on puhelunmuodostuksen nopeus. Lisäksi järjestelmän tulee olla telekommunikaatiojärjestelmien yleisten periaatteiden mukainen, mahdollisimman stabiili ja skaalautuva, jotta järjestelmä olisi mahdollisimman vikasietoinen ja laajennettavissa. Diplomityön päätavoite on esitellä "C++"-tietokantakirjastojen suunnittelua ja testausta. Aluksi tutkitaan tietokantajärjestelmien problematiikkaa alkaen tietokantajärjestelmän valinnasta ja huomioiden erityisesti nopeuskriteerit. Sitten esitellään kaksi teknistä toteutusta kahta "C++"-tietokantakirjastoa varten ja pohditaan joitakin vaihtoehtoisia toteutustapoja.

Electrical characteristics of eddy current position sensor

In the thesis the principle of work of eddy current position sensors and the main cautions that must be taken into account while sensor design process are explained. A way of automated eddy current position sensor electrical characteristics measurement is suggested. A prototype of the eddy current position sensor and its electrical characteristics are investigated. The results obtained by means of the automated measuring system are explained.

Modelling of North-West Russian market behavior considering technical restrictions of transmission grid

Nowadays the Finnish-Russian electric energy interaction is carried out through the back-to-back DC Vyborg substation and several power plants working synchronously with Finnish power system. Constant amount of energy flows in one direction — from Russia to Finland. But the process of electricity market development in Russian energy system makes the new possibilities of electrical cooperation available. The goal of master's thesis is to analyze the current state and possible evolution trends of North-West Russian system in relation with future possible change in power flow between Russia and Finland. The research is done by modelling the market of North-West Russia and examination of technical grid restrictions. The operational market models of North-West region of Russia for the years 2008 and 2015 were created during the research process. The description of prepared market models together with modelling results and their analysis are shown in the work. The description of power flow study process and results are also presented.