Effects of gradual replacement of rapeseed cake with linseed cake in a grass silage-based diet for dairy cows

Selostus: Rypsipuristeen asteittainen korvaaminen pellavapuristeella lypsylehmien säilörehuun perustuvassa ruokinnassa

The effects of added glycerol or unprotected free fatty acids or a combination of the two on silage intake, milk production, rumen fermentation and diet digestibility in cows given grass silage based diets

Selostus: Väkirehuun lisätyn glyserolin tai vapaiden rasvahappojen tai näiden yhdistelmän vaikutus maidontuotantoon ja pötsifermentaatioon ruokittaessa lypsylehmiä säilörehuun perustuvalla ruokinnalla

Barley fibre and wet distillers' solubles in the diet of growing cattle

Selostus: Ohrarehu ja tärkkelysrankki kasvavien lihanautojen säilörehuun perustuvassa ruokinnassa

Effect of feeding level and diet type on the performance of crossbred suckler cows and their calves

Selostus: Ureoidun oljen soveltuvuus risteytysemojen talviruokintaan kahdella eri ruokintatasolla

The Influence of Diet and Microbes on Colonic Immune Regulation and their Implications on Type 1 Diabetes

Dietary and microbial factors are thought to contribute to the rapidly increasing prevalence of T1D in many countries worldwide. The impact of these factors on immune regulation and diabetes development in non-obese diabetic (NOD) mice are investigated in this thesis. Diabetes can be prevented in NOD mice through dietary manipulation. Diet affects the composition of intestinal microbiota, which may subsequently influence intestinal immune homeostasis. However, the specific effects of anti-diabetogenic diets on gut immunity and the explicit associations between intestinal immune disruption and type 1 diabetes onset remain unclear. The research presented herein demonstrates that newly weaned NOD mice suffer from a mild level of colitis, which shifts the colonic immune cell balance towards a proinflammatory status. Several aberrations can also be observed in the peritoneal B cells of NOD mice; an increase in activation marker expression, increased trafficking to the pancreatic lymph nodes and significantly higher antigen presenting cell (APC) efficiency towards insulin-specific T cells. A shift towards inflammation is likewise observed in the colon of germ-free NOD mice, but signs of peritoneal B cell activation are lacking in these mice. Remarkably, most of the abnormalities in the colon, peritoneal macrophages and the peritoneal B cell APC activity of NOD mice are abrogated when NOD mice are maintained on a diabetes-preventive, soy-based diet (ProSobee) from the time of weaning. Dietary and microbial factors hence have a significant impact on colonic immune regulation and peritoneal B cell activation and it is suggested that these factors influence diabetes development in NOD mice.

Segregation of powder mixtures in silos with particular reference to dry mineral-based construction materials

Segregering eller segregation är ett fenomen som kan förekomma inom olika områden av samhället. Inom samhällsvetenskaperna kan segregering definieras som det rumsliga åtskiljandet av befolkningsgrupper på urval av ras eller etniskt ursprung, kön, social härkomst, religion, ålder, yrke, osv. Segregering av befolkningsgrupper sker ofta mer eller mindre frivilligt och är motsatsen till integration. Inom partikelteknologi definieras segregering oftast som det rumsliga åtskiljandet av beståndsdelarna i en blandning av olika partiklar. Segregering sker då på urval av bl.a. partiklarnas storlek, densitet, form, elektrostatiska eller mekaniska egenskaper, och kan beskrivas som motsatsen till blandning. Segregeringsmekanismer används för att förklara hur och varför en partikelblandning segregerar samt vad slutresultatet i form av den rumsliga fördelningen av partiklarna blir till följd av att blandningen utsetts för en viss behandling. I denna avhandling har segregering av partikelblandningar och speciellt torra mineralbaserade byggmaterial (t.ex. murbruk) till följd av lagring i siloer studerats. Vid industriell produktion av mineralbaserade byggmaterial används siloer för korttidslagring av slutprodukterna precis innan förpackning. Segregering leder till kraftiga variationer i sammansättningen för partikelströmmen ut ur silon, vilket gör att slutprodukterna inte uppfyller kvalitetskraven och kan därmed inte säljas till kunder. Detta leder till arbetsam och dyr bearbetning (återcirkulation) av produkterna med påföljder för produktionsekonomin samt hållbara utvecklingen. I avhandlingen identifierades de väsentligaste segregeringsmekanismerna för torra mineralbaserade byggmaterial i siloer. Dessutom klargjordes effekterna av materialegenskaper, processbetingelser och siloparametrar. Slutligen behandlas möjliga åtgärder för minskning av partikelsegregering i siloer samt tillämpning av matematiska metoder för simulering av partikelflöden med hjälp av datorer.

Kålrotens särställning i vår diet

14 x 21 cm

Family-based dietary intervention in the STRIP study – influences on diet and diet-related attitudes

The focus of this dissertation was to investigate the effects of family-based dietary intervention during childhood and adolescence. The participants comprised of children and parents who participated in a longitudinal, randomised atherosclerosis prevention trial (STRIP study). The intervention families (n=540) took part in a dietary intervention since the child’s age of 8- months. The control group (n=522) did not receive any tailored dietary intervention. The main focus of the intervention was to improve the quality of dietary fat. The diet of children and parents was evaluated by daily food records and dietrelated attitudes by a questionnaire. The dietary intervention influenced, favourably, the dietary fat quality in children and parents. Fat quality improved mainly by the decrease of saturated fat intake. Some minor effects of the intervention were also observed in children’s fruit and vegetable (F&V) consumption although the F&V consumption was very low. The intervention increased parental interest in healthy eating, but there was no difference in interest in natural products or in attitudes towards hedonic eating attitudes between the intervention and control parents. Parents’ interest in healthy eating associated with parents’ and children’s high fruit and vegetable consumption but not with their fat quality ratio. On the other hand, dietary fat quality improved at every level of interest in healthy eating. It seems that the main target of the intervention, the dietary fat quality of the children, was promoted effectively. In the future, more emphasis should be given on increasing unsaturated fat intake and on elevating F&V consumption in children. Children’s diet, especially F&V consumption, associated with diet-related attitudes of the parents. Therefore, co-operation with parents and family-based premises for working should be capitalized upon when promoting healthy eating in children and adolescents.

Individual dietary counselling during and after pregnancy: Impact on diet and body weight

In Finland, maternity and child health clinics play a key role in promoting health in young families. Currently, obesity causes the greatest challenges to clinics. In obese pregnant women, an increased risk for metabolic diseases exist which can affect both the mother and child. The purpose of this thesis was to explore the role of dietary counselling: in Finnish health clinics; in the regulation of dietary intake; and in affecting the body weight of women. The main aim was to test the effect of dietary counselling and probiotic intervention on dietary intake and maternal body weight during and after pregnancy. In addition to dietary counselling, the effect of other factors, such as eating behaviour on dietary intake and body weight control after pregnancy was assessed. Another aim was also to evaluate dietary counselling practices by nurses (n = 327) in Finnish health clinics assessed by a questionnaire. At the beginning of the pregnancy, women (n = 256) enrolled in a dietary intervention study, were randomised into three groups. One group received dietary counselling with probiotics, one had counselling with placebo and the third group was the control group. The control group consisted of women whom did not receive counselling and took placebo. Probiotics and placebo supplements were used until the end of exclusive breastfeeding or six months after pregnancy. Women were followed from early pregnancy up to four years after pregnancy. Follow-up visits took place three times during pregnancy, at one and six months, and one, two and four years after pregnancy. Dietary counselling, provided by a nutritionist, aimed to influence the quality of dietary fat intake. Dietary counselling is important to provide in clinics, as determined by the nurses, and these nurses expressed a want to improve their own nutritional knowledge through education. The nurses had varying knowledge of current dietary recommendations. Dietary counselling for women during and after pregnancy resulted in beneficial changes in dietary intake up to one year after pregnancy and body weight and waist circumference up to four years after pregnancy. Probiotics had a beneficial effect together with dietary counselling on waist circumference until one year after pregnancy, but not throughout the long term, four years after pregnancy. Other factors, such as eating behaviour, associated with dietary intake and body weight control after pregnancy. Specifically, dietary recommendations are reached amongst women whom had high cognitive restraint in their eating behaviour and did not demonstrate uncontrolled eating. Overweight women more frequently emotionally ate compared to normal weight women and women with central adiposity related more frequently to having an uncontrolled eating behaviour than women with normal waist circumference. In addition, being overweight prior to pregnancy and excessive weight gain during pregnancy associated with increased body weight retention after pregnancy. This study showed that individual dietary counselling is useful in influencing dietary intake which adheres to dietary recommendations and this counselling influences, favourably, body weight after pregnancy. Especially, women with the risk for weight retention, such as women who have emotional and uncontrolled eating behaviours, who were overweight prior to pregnancy or those who had excessive weight gain during pregnancy, may benefit from individual dietary counselling. This study underscores the need to develop dietary counselling practices for pregnant women and their follow-up after pregnancy in Finnish health clinics. These practices include increasing the efficacy of the counselling such as collaboration with families, having knowledgable health professionals and having sufficient resources.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Metal additive manufacturing of internal flow channels with powder bed fusion processes

This thesis studies the advantages, disadvantages and possibilities of additive manufacturing in making components with internal flow channels. These include hydraulic components, components with cooling channels and heat exchangers. Processes studied in this work are selective laser sintering and selective laser melting of metallic materials. The basic principles of processes and parameters involved in the process are presented and different possibilities of internal channel manufacturing and flow improvement are introduced

Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Weldability of powder bed fusion (PBF) fabricated components has come to discussion in past two years due to resent developments in the PBF technology and limited size of the machines used in the fabrication process. This study concentrated on effects of energy input of welding on mechanical properties and microstructural features of welds between PBF fabricated stainless steel 316L sheets and cold rolled sheet metal of same composition by the means of destructive testing and microscopic analysis. Optical fiber diameter, laser power and welding speed were varied during the experiments that were executed following one variable at a time (OVAT) method. One of the problems of welded PBF fabricated components has been lower elongations at break comparing to conventionally manufactured components. Decreasing energy input of the laser keyhole welding decreased elongations at break of the welded specimens. Ultimate tensile strengths were not affected significantly by the energy input of the welding, but fracturing of the specimens welded using high energy input occurred from the weld metal. Fracturing of the lower energy input welds occurred from the PBF fabricated base metal. Energy input was found to be critical factor for mechanical properties of the welds. Multioriented grain growth and formation of neck at fusion zone boundary on the cold rolled side of the weld was detected and suspected to be result from weld pool flows caused by differences in molten weld pool behaviour between the PBF fabricated and cold rolled sides of the welds.