Pumpunvalitsimet integroidussa simulointiympäristössä

Työssä on tutkittu pumpun valintaa integroidussa simulointiympäristössä. Tutkimuksen avulla on tarkoitus kehittää tieto- ja malligallerian (Galleria) infrastuktuuria ja käytössä olevia työvälineitä siihen suuntaan, että ulkoisten valitsinkomponenttien implementoiminen Gallerian tietokantaan olisi lähitulevaisuudessa helppoa ja nopeaa. Prosessi-integraation tieto- ja malligalleria on infrastruktuurimäärittely ja työvälineistö prosessikomponenttien ja osaprosessien simulointiin tarvittavien malli- ja parametritietojen kirjastoimiseksi internetpohjaiseen tietokantaan, josta ne ovat simulointiohjelmien käyttäjien ja muiden prosessisuunnittelijoiden helposti saatavilla. Tutkimuksen kirjallisessa osassa on keskitytty tutkimaan pumpun valinnan etenemistä ja valintaan vaikuttavia tekijöitä prosessisuunnittelijan näkökulmasta. Tutkimuksen soveltavassa osassa luotiin pumpunvalitsin ja sitä testattiiin Galleria- ympäristöä vastaavassa kehitysympäristössä. Pumpunvalitsimen kehittämisessä on käytetty apuna laitevalmistajalta saatua prosessikomponenttitietoa. Pumpunvalitsimen toteutus perustuu pumpun hydrauliseen valintaan ja esimerkkitapauksena käytettiin keskipakopumppua

Soodakattilan vesi-höyrykierron simulointi

Työssä tutkitaan soodakattilan vesi-höyrykierron laskentaa APROS-simulointiohjelman avulla sekä mahdollisuutta rakentaa soodakattilalle oma mallikirjasto. Lisäksi tarkasteltiin mahdollisuuksia räätälöidä APROS:ista yrityksen omaa tarvetta vastaava simulointiohjelma. Kirjallisuusosuudessa esitellään soodakattilan rakenne pääpiirteittäin sekä APROS-simulointiohjelman ja Nowa-kiertolaskuohjelman laskentaperusteet. Tässä osuudessa kerrotaan myös yleisesti ohjelmien sisällöstä, rakenteesta sekä niiden käytöstä. Työn kokeellisessa osassa on kerrottu soodakattilan vesi-höyrykierron mallinnuksesta APROS:in avulla sekä mallikirjaston luomisen perusteet. Lisäksi tässä osuudessa kerrotaan alimallien tekemisestä ja niiden tarpeellisuudesta sekä simuloinnin ongelmakohdista. Työstä saatujen tulosten perusteella dynaamisen simuloinnin ja mallikirjaston avulla saadaan kiertolaskuja laskettua helposti ja luotettavasti. Alimallikirjastoa ylläpitämällä nopeutetaan kiertolaskuvariaatioden tekoa huomattavasti.

Euron käyttöönoton hallinta keskisuuressa yrityksessä

Työn tavoitteena oli laatia euron käyttöönottosuunnitelma. Ensin selvitettiin euron syntyvaiheet ja yhteisen valuutan käsittelysäännöt. Sen jälkeen käydään läpi eräs käyttökelpoinen suunnitelma euron käyttöönottamiseksi, johon kuuluu euron käyttöönoton and speed up the implementation of external selection components. Model and Parametrisation Gallery for Process Integration is specification of an infrastructure and a set of tools which are built for storing process component and model library data into an internet based database from where it can be easily used by simulator users and other process designers. This work consists of two parts. In the literature survey pump selection and the factors that affects selection particularly on process designers point of view are studied. In the applied part a pump selector was created and tested in the test environment which is comparable to Gallery environment. This was done to ease the deployment of the selector to the actual working environment. Process component data of a manufacturer was used on the development of the pump selector. The execution of the selector is based on the hydraulic selection of pumps. Centrifugal pump was used as an example case.

A System-Level Simulation Model for a Protocol Processor

As the development of integrated circuit technology continues to follow Moore’s law the complexity of circuits increases exponentially. Traditional hardware description languages such as VHDL and Verilog are no longer powerful enough to cope with this level of complexity and do not provide facilities for hardware/software codesign. Languages such as SystemC are intended to solve these problems by combining the powerful expression of high level programming languages and hardware oriented facilities of hardware description languages. To fully replace older languages in the desing flow of digital systems SystemC should also be synthesizable. The devices required by modern high speed networks often share the same tight constraints for e.g. size, power consumption and price with embedded systems but have also very demanding real time and quality of service requirements that are difficult to satisfy with general purpose processors. Dedicated hardware blocks of an application specific instruction set processor are one way to combine fast processing speed, energy efficiency, flexibility and relatively low time-to-market. Common features can be identified in the network processing domain making it possible to develop specialized but configurable processor architectures. One such architecture is the TACO which is based on transport triggered architecture. The architecture offers a high degree of parallelism and modularity and greatly simplified instruction decoding. For this M.Sc.(Tech) thesis, a simulation environment for the TACO architecture was developed with SystemC 2.2 using an old version written with SystemC 1.0 as a starting point. The environment enables rapid design space exploration by providing facilities for hw/sw codesign and simulation and an extendable library of automatically configured reusable hardware blocks. Other topics that are covered are the differences between SystemC 1.0 and 2.2 from the viewpoint of hardware modeling, and compilation of a SystemC model into synthesizable VHDL with Celoxica Agility SystemC Compiler. A simulation model for a processor for TCP/IP packet validation was designed and tested as a test case for the environment.

Defining a framework model to determine total costs of managed desktops using ITIL best practices

In modern day organizations there are an increasing number of IT devices such as computers, mobile phones and printers. These devices can be located and maintained by using specialized IT management applications. Costs related to a single device accumulate from various sources and are normally categorized as direct costs like hardware costs and indirect costs such as labor costs. These costs can be saved in a configuration management database and presented to users using web based development tools such as ASP.NET. The overall costs of IT devices during their lifecycle can be ten times higher than the actual purchase price of the product and ability to define and reduce these costs can save organizations noticeable amount of money. This Master’s Thesis introduces the research field of IT management and defines a custom framework model based on Information Technology Infrastructure Library (ITIL) best practices which is designed to be implemented as part of an existing IT management application for defining and presenting IT costs.

Developing A Knowledge Management Process Model for Internal IT Organization, Case: Stora Enso Oyj, Corporate IT

The objectives of this Master’s Thesis were to find out what kind of knowledge management strategy would fit best an IT organization that uses ITIL (Information Technology Infrastructure Library) framework for IT Service Management and to create a knowledge management process model to support chosen strategy. The empirical material for this research was collected through qualitative semi-structured interviews of a case organization Stora Enso Corporate IT. The results of the qualitative interviews indicate that codification knowledge management strategy would fit best for the case organization. The knowledge management process model was created based on earlier studies and a literature of knowledge management. The model was evaluated in the interview research and the results showed that the created process model is realistic, useful, and it responds to a real life phenomenon.

Biodiversity Heritage Library: a global open repository

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A Model for Integrating the Publication and Preservation of Journal Articles

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014