The effects of location, feedstock availability, and supply-chain logistics on the greenhouse gas emissions of forest-biomass energy utilization in Finland

Forest biomass represents a geographically distributed feedstock, and geographical location affects the greenhouse gas (GHG) performance of a given forest-bioenergy system in several ways. For example, biomass availability, forest operations, transportation possibilities and the distances involved, biomass end-use possibilities, fossil reference systems, and forest carbon balances all depend to some extent on location. The overall objective of this thesis was to assess the GHG emissions derived from supply and energy-utilization chains of forest biomass in Finland, with a specific focus on the effect of location in relation to forest biomass’s availability and the transportation possibilities. Biomass availability and transportation-network assessments were conducted through utilization of geographical information system methods, and the GHG emissions were assessed by means of lifecycle assessment. The thesis is based on four papers in which forest biomass supply on industrial scale was assessed. The feedstocks assessed in this thesis include harvesting residues, smalldiameter energy wood and stumps. The principal implication of the findings in this thesis is that in Finland, the location and availability of biomass in the proximity of a given energyutilization or energy-conversion plant is not a decisive factor in supply-chain GHG emissions or the possible GHG savings to be achieved with forest-biomass energy use. Therefore, for the greatest GHG reductions with limited forest-biomass resources, energy utilization of forest biomass in Finland should be directed to the locations where most GHG savings are achieved through replacement of fossil fuels. Furthermore, one should prioritize the types of forest biomass with the lowest direct supply-chain GHG emissions (e.g., from transport and comminution) and the lowest indirect ones (in particular, soil carbon-stock losses), regardless of location. In this respect, the best combination is to use harvesting residues in combined heat and power production, replacing peat or coal.

Greenhouse gas emissions from peat and biomass-derived fuels, electricity and heat — Estimation of various production chains by using LCA methodology

More discussion is required on how and which types of biomass should be used to achieve a significant reduction in the carbon load released into the atmosphere in the short term. The energy sector is one of the largest greenhouse gas (GHG) emitters and thus its role in climate change mitigation is important. Replacing fossil fuels with biomass has been a simple way to reduce carbon emissions because the carbon bonded to biomass is considered as carbon neutral. With this in mind, this thesis has the following objectives: (1) to study the significance of the different GHG emission sources related to energy production from peat and biomass, (2) to explore opportunities to develop more climate friendly biomass energy options and (3) to discuss the importance of biogenic emissions of biomass systems. The discussion on biogenic carbon and other GHG emissions comprises four case studies of which two consider peat utilization, one forest biomass and one cultivated biomasses. Various different biomass types (peat, pine logs and forest residues, palm oil, rapeseed oil and jatropha oil) are used as examples to demonstrate the importance of biogenic carbon to life cycle GHG emissions. The biogenic carbon emissions of biomass are defined as the difference in the carbon stock between the utilization and the non-utilization scenarios of biomass. Forestry-drained peatlands were studied by using the high emission values of the peatland types in question to discuss the emission reduction potential of the peatlands. The results are presented in terms of global warming potential (GWP) values. Based on the results, the climate impact of the peat production can be reduced by selecting high-emission-level peatlands for peat production. The comparison of the two different types of forest biomass in integrated ethanol production in pulp mill shows that the type of forest biomass impacts the biogenic carbon emissions of biofuel production. The assessment of cultivated biomasses demonstrates that several selections made in the production chain significantly affect the GHG emissions of biofuels. The emissions caused by biofuel can exceed the emissions from fossil-based fuels in the short term if biomass is in part consumed in the process itself and does not end up in the final product. Including biogenic carbon and other land use carbon emissions into the carbon footprint calculations of biofuel reveals the importance of the time frame and of the efficiency of biomass carbon content utilization. As regards the climate impact of biomass energy use, the net impact on carbon stocks (in organic matter of soils and biomass), compared to the impact of the replaced energy source, is the key issue. Promoting renewable biomass regardless of biogenic GHG emissions can increase GHG emissions in the short term and also possibly in the long term.

Reduction of Greenhouse Gas Emissions in North-West Russia - Finnish Business Opportunities

Tutkimus suomalaisten yritysten liiketoimintamahdollisuuksista hiilidoksidipäästöjen vähentämisen parissa Luoteis-Venäjällä.

Mitigation possibilities to Greenhouse gas emissions from power production in India

Global warming is assertively the greatest environmental challenge for humans of 21st century. It is primarily caused by the anthropogenic greenhouse gas (GHG) that trap heat in the atmosphere. Because of which, the GHG emission mitigation, globally, is a critical issue in the political agenda of all high-profile nations. India, like other developing countries, is facing this threat of climate change while dealing with the challenge of sustaining its rapid economic growth. India’s economy is closely connected to its natural resource base and climate sensitive sectors like water, agriculture and forestry. Due to Climate change the quality and distribution of India’s natural resources may transform and lead to adverse effects on livelihood of its people. Therefore, India is expected to face a major threat due to the projected climate change. This study proposes possible solutions for GHG emission mitigation that are specific to the power sector of India. The methods discussed here will take Indian power sector from present coal dominant ideology to a system, centered with renewable energy sources. The study further proposes a future scenario for 2050, based on the present Indian government policies and global energy technologies advancements.

Biopolttoaineiden lisäämismahdollisuudet kaukolämmön tuotannossa pienen kokoluokan tuotantolaitoksissa Lahden seudulla

Tämä diplomityö on tehty IMMU-hankkeeseen, jossa selvitetään konkreettisia keinoja ilmastonmuutoksen hillintään Lahden seudulla. Diplomityössä tarkastellaan mahdollisuuksia lisätä biopolttoaineita pienen kokoluokan kaukolämmön tuotantolaitoksissa. Teoria osuuden pohjalta luodaan skenaariot Nastolaan ja Vääksyyn (Asikkala). Skenaarioissa tarkastellaan biopolttoaineiden lisäämisen vaikutuksia kasvihuonekaasu- ja hiukkaspäästöihin käyttämällä elinkaariarviointimenetelmää. Taloudellisia seikkoja tarkastellaan laskemalla takaisinmaksuaikoja eri biolaitosratkaisuille nettonykyarvomenetelmällä. Tutkimuksen tuloksena saatiin, että kasvihuonekaasupäästöt tuotannon elinkaaren ajalta vähenevät eniten tuottamalla kaukolämmön perustuotanto Nastolassa ja Vääksyssä bio-CHP-laitoksella haketta polttamalla. Kiinteitä biopolttoaineita poltettaessa tulevat kuitenkin suurimmat hiukkaspäästöt, mikä vaikuttaa asuinympäristön viihtyvyyteen tuotantolaitoksen läheisyydessä. Bio-CHP-laitoksen investointikustannukset ovat suurimmat ja takaisinmaksuaika pisin. Nastolan kulutusperusteisiä päästöjä pystytään vähentämään eniten investoimalla biolämpölaitokseen tai bio-CHP-laitokseen. Päästöjä Nastolassa pystyttäisiin kyseisillä investoinneilla vähentämään enimmillään 6,4 %. Lahti energian kokonaispäästöjä pystyttäisiin enimmillään vähentämään noin 1,6 %. Johtopäätöksenä tutkimuksesta voidaan sanoa, että kasvihuonekaasupäästöjä pystytään vähentämään investointien avulla. Toiset ratkaisut ovat vain kalliimpia kuin toiset. Lisäksi kiinteitä biopolttoaineita käytettäessä jotkut poltto-ominaisuudet voivat heiketä esim. verrattuna maakaasun polttoon. Biopolttoaineiden lisäämisellä kuitenkin päästään irti riippuvuudesta fossiilisiin polttoaineisiin kuten öljyyn ja maakaasuun. Investointeja tehdessä on vaikea sanoa suoraan, mikä vaihtoehto on paras tapa tuottaa kaukolämpöä. Investointipäätöksiä tehdessä päätökseen vaikuttaa se, mitä tuotannon ominaispiirteitä painotetaan eniten.

Spin-Dynamics in Cold Gases of 87Rb and Atomic Hydrogen. The spins they are a-changin’

In this thesis the dynamics of cold gaseous atoms is studied. Two different atomic species and two different experimental techniques have been used. In the first part of the thesis experiments with Bose-Einstein condensates of Rb-87 are presented. In these experiments the methods of laser cooling and magnetic trapping of atoms were utilized. An atom chip was used as the experimental technique for implementation of magnetic trapping. The atom chip is a small integrated instrument allowing accurate and detailed manipulation of the atoms. The experiments with Rb-87 probed the behaviour of a falling beam of atoms outcoupled from the Bose-Einstein condensate by electromagnetic field induced spin flips. In the experiments a correspondence between the phases of the outcoupling radio frequency field and the falling beam of atoms was found. In the second part of the thesis experiments of spin dynamics in cold atomic hydrogen gas are discussed. The experiments with atomic hydrogen are conducted in a cryostat using a dilution refrigerator as the cooling method. These experiments concentrated on explaining and quantifying modulations in the electron spin resonance spectra of doubly polarized atomic hydrogen. The modifications to the previous experimental setup are described and the observation of electron spin waves is presented. The observed spin wave modes were caused by the identical spin rotation effect. These modes have a strong dependence on the spatial profile of the polarizing magnetic field. We also demonstrated confinement of these modes in regions of strong magnetic field and manipulated their spatial distribution by changing the position of the field maximum.

Automatic traffic sign inventory- and condition analysis

This thesis researches automatic traffic sign inventory and condition analysis using machine vision and pattern recognition methods. Automatic traffic sign inventory and condition analysis can be used to more efficient road maintenance, improving the maintenance processes, and to enable intelligent driving systems. Automatic traffic sign detection and classification has been researched before from the viewpoint of self-driving vehicles, driver assistance systems, and the use of signs in mapping services. Machine vision based inventory of traffic signs consists of detection, classification, localization, and condition analysis of traffic signs. The produced machine vision system performance is estimated with three datasets, from which two of have been been collected for this thesis. Based on the experiments almost all traffic signs can be detected, classified, and located and their condition analysed. In future, the inventory system performance has to be verified in challenging conditions and the system has to be pilot tested.

Testing FCM technique for the wind energy scenarios in Finland

In the latter days, human activities constantly increase greenhouse gases emissions in the atmosphere, which has a direct impact on a global climate warming. Finland as European Union member, developed national structural plan to promote renewable energy generation, pursuing the aspects of Directive 2009/28/EC and put it on the sharepoint. Finland is on a way of enhancing national security of energy supply, increasing diversity of the energy mix. There are plenty significant objectives to develop onshore and offshore wind energy generation in country for a next few decades, as well as another renewable energy sources. To predict the future changes, there are a lot of scenario methods developed and adapted to energy industry. The Master’s thesis explored “Fuzzy cognitive maps” approach in scenarios developing, which captures expert’s knowledge in a graphical manner and using these captures for a raw scenarios testing and refinement. There were prospects of Finnish wind energy development for the year of 2030 considered, with aid of FCM technique. Five positive raw scenarios were developed and three of them tested against integrated expert’s map of knowledge, using graphical simulation. The study provides robust scenarios out of the preliminary defined, as outcome, assuming the impact of results, taken after simulation. The thesis was conducted in such way, that there will be possibilities to use existing knowledge captures from expert panel, to test and deploy different sets of scenarios regarding to Finnish wind energy development.

Growth of and partitioning between shoot and storage root of carrot in a northern climate

Selostus: Porkkanan kasvu ja biomassan jakautuminen varastojuuren ja verson välillä pohjoisissa oloissa

Oman varastoinnin ja toimittajavarastoinnin vertailu - Case teollisuusyritys

Työn tavoitteena oli selvittää, kumpi kahdesta varastointitavasta, oma varastointi vai toimittajavarastointi, on tutkimuksen toimeksiantajayrityksen kannalta edullisempi vaihtoehto varastoida kunnossapidon varaosia. Tarkoituksena oli selvittää case-yrityksen oman varastoinnin aiheuttamat kustannukset ja verrata niitä toimittajavarastoinnin kustannuksiin. Varastointikustannuksia tarkasteltiin tutkimukseen valittujen varaosanimikkeiden avulla. Kyseessä oli kvalitatiivinen tutkimus, jossa aineistonkeruumenetelminä käytettiin haastatteluja ja erilaisia valmiita dokumentteja. Työn teoriaosassa käsiteltiin varastointia, varastoinnin ulkoistamista, toimittajavarastointia sekä varastoinnista aiheutuneita kustannuksia. Teoriaosa pohjautui aikaisempiin tutkimuksiin ja alan kirjallisuuteen. Empiirisessä osassa perehdyttiin tutkimuksen toimeksiantajayrityksen varaosien varastointiin sekä selvitettiin tarkasteluun valittujen varaosanimikkeiden osalta varastoinnista aiheutuneet kustannukset. Tutkimuksen tulosten pohjalta tehtiin taulukkolaskentaohjelmalla niin kutsuttu simulointimalli, jonka avulla tutkimuksen varastointikustannuksiin liittyviä laskelmia voidaan käyttää hyväksi myös case-yrityksen muiden varaosanimikkeiden kohdalla. Malli tarjoaa yksinkertaisen tavan kohdistaa varastointikustannuksia varaosanimikkeille. Mallin avulla on siis mahdollista saada suuntaa-antaviavastauksia oman varastoinnin ja toimittajavarastoinnin kannattavuuden vertailussa.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Suomen öljytaseen laskenta kansainvälisessä raportoinnissa ja kansallisessa tilastoinnissa

Työn kohteena olivat Suomen öljytaseeseen liittyvät kansainväliset vuosikyselyt, joiden raportoinnista Suomessa vastaa Tilastokeskus. Samalla tarkasteltiin Tilastokeskuksen laatimia kansallisia energiatilastoja, jotka liittyvät öljyn hankintaan, jalostukseen ja käyttöön. Työn pääpaino oli kuitenkin kansainvälisissä raportoinneissa. Työn tavoitteena oli kehittää Eurostatin, IEA:n ja YK:n vuosittaisen öljykyselyn sekä YK:n ilmastosopimukselle laadittavaan kasvihuonekaasuinventaarioon liittyvän Reference Approach -laskennan raportointia. Selvitysten toivottiin pienentävän öljynhankinnan ja kulutuksen välisistä tase-eroista johtuvia tilastovirheitä. Kansainvälisten raportointien tutkimuksesta odotettiin myös löytyvän kehittämisehdotuksia kansallisiin energiatilastoihin. Vuosittaisten energiakyselyiden pohjalta syntyvät merkittävimmät kansainväliset energiatilastotietokannat. Tietoja käytetään useisiin tarkoituksiin muun muassa energian riittävyyden jakulutuksen analysointiin globaalisti. Reference Approach on taas vaihtoehtoinenlaskentatapa energiakäytöstä ja -tuotannosta aiheutuville hiilidioksidipäästöille. Reference Approach raportoidaan vuosittain YK:n ilmastosopimukselle. Työ toteutettiin tarkastelemalla kansainvälisen öljykyselyn rakennetta ja useista eri lähteistä saatuja öljytuotteiden lähtötietoja. Vuoden 2004 öljykyselyä täydennettiin ja tietoja verrattiin alkuperäiseen raporttiin. Reference Approach -laskennan tutkiminen toteutettiin tarkistamalla öljytuotteiden lähtötiedot ja loppukäytön jakaantuminen energiakäytön ja raaka-ainekäytön välillä. Tutkimuksien pohjalta Reference Approach -aikasarja laskettiin uudelleen ja tuloksia verrattiin alkuperäiseen aikasarjaan. Työn tuloksena saatiin sekä kansainvälistä öljykyselyä että Reference Approach -laskentaa tarkennettua huomattavasti. Samalla tilastovirheet pienenivät merkittävästi. Työssä tehtyjä havaintoja ja tuloksia tullaan hyödyntämään jatkossa sekä Suomen kasvihuonekaasupäästöjen laskennassa että kansainvälisen öljykyselyn raportoinnissa.