Interdependence of Macroeconomics Variables, Stock Market Returns and Stock Market Volatility in Latin America

This thesis examines the interdependence of macroeconomic variables, stock market returns and stock market volatility in Latin America between 2000 and 2015. Argentina, Brazil, Chile, Colombia, Mexico and Peru were chosen as the sample markets, while inflation, interest rate, exchange rate, money supply, oil and gold were chosen as the sample macroeconomic variables. Bivariate VAR (1) model was applied to examine the mean return spillovers between the variables, whereas GARCH (1, 1) – BEKK model was applied to capture the volatility spillovers. The sample was divided into two smaller sub-periods, where the first sub-period covers from 2000 to 2007, and the second sub-period covers from 2007 to 2015. The empirical results report significant shock transmissions and volatility spillovers between inflation, interest rate, exchange rate, money supply, gold, oil and the selected markets, which suggests interdependence between the variables.

Peso problem anddevaluation expectations: Evidence from Latin America

Tämän tutkielman tavoitteena on tutkia peso-ongelmaa sekä devalvaatio-odotuksia seuraavissa Latinalaisen Amerikan maissa: Argentiina, Brasilia, Costa Rica, Uruguay ja Venezuela. Lisäksi tutkitaan, onko peso-ongelmalla mahdollista selittää korkojen epäsäännöllistä käyttäytymistä ennen todellisen devalvaation tapahtumista. Jotta näiden tutkiminen olisi mahdollista, lasketaan markkinoiden odotettu devalvaation todennäköisyys tutkittavissa maissa. Odotettu devalvaation todennäköisyys lasketaan aikavälillä tammikuusta 1996 joulukuuhun 2006 käyttäen kahta erilaista mallia. Korkoero-mallin mukaan maiden välisestä korkoerosta on mahdollista laskea markkinoiden devalvaatio-odotukset. Toiseksi, Probit-mallissa käytetään useita makrotaloudellisia tekijöitä selittävinä muuttujina laskettaessa odotettua devalvaation todennäköisyyttä. Lisäksi tutkitaan, miten yksittäisten makrotaloudellisten muuttujien kehitys vaikuttaa odotettuun devalvaation todennäköisyyteen. Empiiriset tulokset osoittavat, että tutkituissa Latinalaisen Amerikan maissa oli peso-ongelma aikavälillä tammikuusta 1996 joulukuuhun 2006. Korkoero-mallin tulosten mukaan peso-ongelma löytyi kaikista muista tutkituista maista lukuun ottamatta Argentiinaa. Vastaavasti Probit-mallin mukaan peso-ongelma löytyi kaikista tutkituista maista. Tulokset osoittavat myös, että korkojen epäsäännöllinen kehitys ennen varsinaista devalvaatiota on mahdollista selittää peso-ongelmalla. Probit-mallin tulokset osoittavat lisäksi, että makrotaloudellisten muuttujien kehityksellä ei ole mitään tiettyä kaavaa liittyen siihen, kuinka ne vaikuttavat markkinoiden devalvaatio-odotuksiin Latinalaisessa Amerikassa. Pikemmin vaikutukset näyttävät olevan maakohtaisia.

Quantitative market and sales forecast accuracy analysis

The main objective of this master’s thesis was to quantitatively study the reliability of market and sales forecasts of a certain company by measuring bias, precision and accuracy of these forecasts by comparing forecasts against actual values. Secondly, the differences of bias, precision and accuracy between markets were explained by various macroeconomic variables and market characteristics. Accuracy and precision of the forecasts seems to vary significantly depending on the market that is being forecasted, the variable that is being forecasted, the estimation period, the length of the estimated period, the forecast horizon and the granularity of the data. High inflation, low income level and high year-on-year market volatility seems to be related with higher annual market forecast uncertainty and high year-on-year sales volatility with higher sales forecast uncertainty. When quarterly market size is forecasted, correlation between macroeconomic variables and forecast errors reduces. Uncertainty of the sales forecasts cannot be explained with macroeconomic variables. Longer forecasts are more uncertain, shorter estimated period leads to higher uncertainty, and usually more recent market forecasts are less uncertain. Sales forecasts seem to be more uncertain than market forecasts, because they incorporate both market size and market share risks. When lead time is more than one year, forecast risk seems to grow as a function of root forecast horizon. When lead time is less than year, sequential error terms are typically correlated, and therefore forecast errors are trending or mean-reverting. The bias of forecasts seems to change in cycles, and therefore the future forecasts cannot be systematically adjusted with it. The MASE cannot be used to measure whether the forecast can anticipate year-on-year volatility. Instead, we constructed a new relative accuracy measure to cope with this particular situation.

Konkurssin ennustaminen ja makrotaloudelliset muuttujat: rakennusalan pk-yritykset

Tämän tutkimuksen tavoitteena on selvittää kannattaako makrotaloudellisia muuttujia käyttää tunnuslukujen lisäksi yrityksen konkurssin ennustamisessa. Perinteiset konkurssinennustamismallit hyödyntävät pelkästään tilinpäätöksestä saatavia tunnuslukuja eivätkä huomioi yrityksen toimintaympäristöä ja sen muutoksia. Aiemmissa tutkimuksissa makrotaloudellisilla muuttujilla on pystytty parantamaan perinteisiä ennustamismalleja. Tutkimus toteutetaan luomalla kolme erilaista konkurssinennustamismallia logistista regressioanalyysiä hyödyntäen ja vertailemalla niiden paremmuutta. Tutkimustulokset osoittavat, että rakennusalan pk-yritysten konkursseja pystytään ennustamaan kolmen tunnusluvun mallilla. Taloudellisen ajanjakson, jolta yrityksen tiedot ovat peräisin, huomioiminen ei tuo malliin lisäarvoa eikä paranna ennustamiskykyä merkittävästi.

Konkurssin ennustaminen ja makrotaloudelliset muuttujat: rakennusalan pk-yritykset

Tämän tutkimuksen tavoitteena on selvittää kannattaako makrotaloudellisia muuttujia käyttää tunnuslukujen lisäksi yrityksen konkurssin ennustamisessa. Perinteiset konkurssinennustamismallit hyödyntävät pelkästään tilinpäätöksestä saatavia tunnuslukuja eivätkä huomioi yrityksen toimintaympäristöä ja sen muutoksia. Aiemmissa tutkimuksissa makrotaloudellisilla muuttujilla on pystytty parantamaan perinteisiä ennustamismalleja. Tutkimus toteutetaan luomalla kolme erilaista konkurssinennustamismallia logistista regressioanalyysiä hyödyntäen ja vertailemalla niiden paremmuutta. Tutkimustulokset osoittavat, että rakennusalan pk-yritysten konkursseja pystytään ennustamaan kolmen tunnusluvun mallilla. Taloudellisen ajanjakson, jolta yrityksen tiedot ovat peräisin, huomioiminen ei tuo malliin lisäarvoa eikä paranna ennustamiskykyä merkittävästi.

Osakkeiden hintojen muutokset makrotalouden muuttujia ennakoivina tekijöinä 2001-2011: BRIC-maat , euroalue, Japani ja USA.

The aim of this thesis is to examine stock returns as predictive indicators to macroeconomic variables in BRIC-countries, Japan, USA and euro area. We picked to represent macroeconomic variables interest rate, inflation, currency, gross domestic product and industrial production. For the beginning we examined previous studies and theory about the subject. Hypothesis of this thesis were derived from the previous studies. To conduct the results we used tests such augmented Dickey-Fuller, Engle-Granger co-integration, Granger causality and lagged distribution model. According to results stock returns do predictive macroeconomic variables and specifically changes of GDP and industrial production. There were few evidences of stock returns predictive power of inflation.

Dynamic linkages of real estate and stock markets in Finland

Traditionally real estate has been seen as a good diversification tool for a stock portfolio due to the lower return and volatility characteristics of real estate investments. However, the diversification benefits of a multi-asset portfolio depend on how the different asset classes co-move in the short- and long-run. As the asset classes are affected by the same macroeconomic factors, interrelationships limiting the diversification benefits could exist. This master’s thesis aims to identify such dynamic linkages in the Finnish real estate and stock markets. The results are beneficial for portfolio optimization tasks as well as for policy-making. The real estate industry can be divided into direct and securitized markets. In this thesis the direct market is depicted by the Finnish housing market index. The securitized market is proxied by the Finnish all-sectors securitized real estate index and by a European residential Real Estate Investment Trust index. The stock market is depicted by OMX Helsinki Cap index. Several macroeconomic variables are incorporated as well. The methodology of this thesis is based on the Vector Autoregressive (VAR) models. The long-run dynamic linkages are studied with Johansen’s cointegration tests and the short-run interrelationships are examined with Granger-causality tests. In addition, impulse response functions and forecast error variance decomposition analyses are used for robustness checks. The results show that long-run co-movement, or cointegration, did not exist between the housing and stock markets during the sample period. This indicates diversification benefits in the long-run. However, cointegration between the stock and securitized real estate markets was identified. This indicates limited diversification benefits and shows that the listed real estate market in Finland is not matured enough to be considered a separate market from the general stock market. Moreover, while securitized real estate was shown to cointegrate with the housing market in the long-run, the two markets are still too different in their characteristics to be used as substitutes in a multi-asset portfolio. This implies that the capital intensiveness of housing investments cannot be circumvented by investing in securitized real estate.

Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Determinants of capital expenditures: Evidence from oil and mining sectors in Russia

This master’s thesis investigates the significant macroeconomic and firm level determinants of CAPEX in Russian oil and mining sectors. It also studies the Russian oil and mining sectors, its development, characteristics and current situation. The panel data methodology was implemented to identify the determinants of CAPEX in Russian oil and mining sectors and to test derived hypotheses. The core sample consists of annual financial data of 45 publicly listed Russian oil and mining sector companies. The timeframe of the thesis research is a six year period from 2007 to 2013. The findings of the master’s thesis have shown that Gross Sales, Return On Assets, Free Cash Flow and Long Term Debt are firm level performance variables along with Russian GDP, Export, Urals and the Reserve Fund are macroeconomic variables that determine the magnitude of new capital expenditures reported by publicly listed Russian oil and mining sector companies. These results are not controversial to the previous research paper, indeed they confirm them. Furthermore, the findings from the emerging countries, such as Malaysia, India and Portugal, are analogous to Russia. The empirical research is edifying and novel. Findings from this master’s thesis are highly valuable for the scientific community, especially, for researchers who investigate the determinant of CAPEX in developing countries. Moreover, the results can be utilized as a cogent argument, when companies and investors are doing strategic decisions, considering the Russian oil and mining sectors.

Variation in biomass related variables of reed canary grass

Selostus: Ruokohelven biomassan tuotantoon vaikuttavien ominaisuuksien vaihtelu

Stratified estimation of forest inventory variables using spatially summarized stratifications

Abstract

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.