Key factors in transforming university internationalization into commercial activity in Finland. Case of University of Turku

Globalization, developments in ICT, emergence of knowledge society and other changes have reformed the environment for international higher education during the past few decades. Consequently, higher education sector has moved towards more marketing-oriented system, and universities have started to undertake commercial activities as part of their internationalization. This development has emerged to Finland as well, which forms the basis for this study. The purpose is to examine commercialization in Finnish university landscape and to investigate the ways Finnish university could capitalize its international activities and educational knowledge for export. The research question of the study is: What are the key factors in transforming university internationalization into commercial activity in the Finnish university landscape? The main problem is further divided into three sub-questions: 1) How can a university internationalize; 2) what are the motivational factors behind university internationalization and commercialization; and 3) how can higher education be developed into export services and products? The research was conducted as a qualitative case study of University of Turku. Methods used for gathering and examining data were interviewing and document analysis. Primary data was collected through four individual semi-structured interviews, which were conducted face-to-face. Secondary data that included reports, articles and electronic materials such as university web pages, was used to complement the primary data. The results were analyzed by theming the data into three broader categories of internationalization activities; drivers and motivations and; education export activities. After the data was organized in themes, analysis continued by comparing different parts of data and finding patterns that would explain the phenomenon in Finnish universities. According to the empirical data, University of Turku is currently on the growth state of internationalization with strategies such as internationalization of curriculum, establishment of international research groups, mobility of students and academics, international networking and support services. Commercialization phenomenon is still rather new to the case university, but it has already developed educational products and services for export. The study concludes that university internationalization cannot be directly transformed into commercial activities in the Finnish context, but the universities need to be active in actually creating educational products. The key factors found in this study include: 1) the Finnish government policies behind the current hype of export education; 2) the potential and knowledge capacity of universities for exports; 3) need for additional profits; 4) further internationalization through commercial activities; 5) recognizing and exploiting the specific areas of strength and 6) establishing of cooperative partnerships for better products.

Key factors in U.S. Government support of business internationalization in Finland Case: U.S. Embassy in Helsinki

This study discusses the importance of government intervention for companies and the expansion of national innovation systems. The purpose of the study is to examine the impact which the U.S. Embassy in Helsinki can have on Finnish businesses through their business support programs and events. The embassy has shifted focus in recent years with the creation of an innovation center and increased business services. The study has sub-objectives to discover the critical factors for producing impact, host and home based factor interaction, and effects produced by these initiatives. The theoretical background of the study consists of literature relating to the concepts of national innovation systems and government intervention. The empirical research conduct for this study is based on interviews with experts from the environment surrounding the U.S. Embassy in Helsinki, Finland and participation in embassy events. The data was collected between March 2014 and September 2015. Seven interviews were conducted; five with representatives of the U.S. Embassy and two with related organizations. Thematic analysis was used to categorize and interpret interview and observation data. The use of an impact radar was implemented as a basis for analysis. This study finds that the internationalization of national innovation systems provides interesting opportunities and challenges for national governments. The opportunity to provide services to foreign companies by an embassy in a stable environment opens the possibility to create positive notice and relations with the host country. The increased connections and inputs to the national innovation system of the home country have the potential to increase knowledge absorption and create positive growth. The most effective way for governments to encourage businesses is to create incentives and reduce barriers. The services are best aimed at small to medium sized companies in the early stages of development. The findings of this report suggest that the most critical factors for producing impact on companies are the ability to disseminate information effectively, the ability to create a positive image of the country, the ability to foster effective networks between the two countries, and the ability to facilitate the internationalization of companies. In the best cases, the embassy is able to create incentives to internationalize to the United States and reduce barriers which are encountered by companies. Future research is necessary to fully understand the impact of business services provided by an embassy can have on the political and economic relations of countries, and on particular industry sectors. The institutional setting provided by the embassy’s focus on business relations provides a rich environment for further study in a number of areas.

Key factors affecting purchase intention in Russian online context

Russian e-commerce has drawn a lot of attention in academic publications as well as in public media lately. The market is growing with a speed of rocket offering companies enormous business opportunities. However, combination of Russian culture, consumer online purchasing and decision-making process forms a subject yet completely unknown. From international online business perspective it is vital for companies to know how a culture affects consumer’s purchase decision and what are the key elements that need to be modified in order to successfully expand online operations to Russian market. Here, the main purpose is to define the key factors affecting Russian consumer’s online purchase intention. In order to answer the main research question, firstly the role of culture in purchase intention context is researched. Secondly, focus is drawn to the factors that affect online purchase intention. Lastly, it is researched how Russian culture is affecting e-commerce attributes modification. The objective is not only to expand the theoretical understanding of the subject but also to provide companies with a clear vision on how the online operations should be conducted in Russian online market. Ranganathan’s and Jha’s conceptual framework was chosen as a ground theory in this study. Here, three main categories Computer Self-Efficacy and Past Online Experience, Website Quality and Costumer Concerns form basis for the study. Various articles and academic literature supplemented this theoretical approach. Qualitative research method was adapted and the study was conducted through five expert interviews. As a conclusion it can be stated that culture forms a ground for entire purchase decision-making process in online context. Results from the interviews were grouped according to main three theoretic categories and placed with Ranganathan’s and Jha’s original framework. This formed a new theoretical framework that defines diverse factors affecting specifically Russian consumer’s online purchase intention. This study suggests that following factors need to be taking into serious consideration in Russian online context: photography style, detailed product and company information, colors, language, product variety, reviews, recommendations, strong social media presence, fast check out and minimalistic order information, counterfeit fear, cash on delivery payment, training and guidance, extensive customer service, consumers’ insecurity, inexperience, high interest for technology and their individualistic personality.

Success factors of commercial open source software projects

Open source and open source software development have been interesting phenomena during the past decade. Traditional business models do not apply with open source, where the actual product is free. However, it is possible to make business with open source, even successfully, but the question is: how? The aim of this study is to find the key factors of successfully making business out of commercial open source software development. The task is achieved by finding the factors that influence open source projects, finding the relation between those factors, and find out why some factors explain the success more than others. The literature review concentrates first on background of open innovation, open source and open source software. Then business models, critical success factors and success measures are examined. Based on existing literature a framework was created. The framework contains categorized success factors that influence software projects in general as well as open source software projects. The main categories of success factors in software business are divided into community management, technology management, project management and market management. In order to find out which of the factors based on the existing literature are the most critical, empirical research was done by conducting unstructured personal interviews. The main finding based on the interviews is that the critical success factors in open source software business do not differ from those in traditional software business or in fact from those in any other business. Some factors in the framework came out in the interviews that can be considered as key factors: establishing and communicating hierarchy (community management), localization (technology management), good license know-how and IPR management (project management), and effective market management (market management). The critical success factors according to the interviewees are not listed in the framework: low price, good product and good business model development.

Local and Regional Scale Determinants of Biodiversity Patterns in Boreal Agricultural Landscapes

This thesis examines the local and regional scale determinants of biodiversity patterns using existing species and environmental data. The research focuses on agricultural environments that have experienced rapid declines of biodiversity during past decades. Existing digital databases provide vast opportunities for habitat mapping, predictive mapping of species occurrences and richness and understanding the speciesenvironment relationships. The applicability of these databases depends on the required accuracy and quality of the data needed to answer the landscape ecological and biogeographical questions in hand. Patterns of biodiversity arise from confounded effects of different factors, such as climate, land cover and geographical location. Complementary statistical approaches that can show the relative effects of different factors are needed in biodiversity analyses in addition to classical multivariate models. Better understanding of the key factors underlying the variation in diversity requires the analyses of multiple taxonomic groups from different perspectives, such as richness, occurrence, threat status and population trends. The geographical coincidence of species richness of different taxonomic groups can be rather limited. This implies that multiple geographical regions should be taken into account in order to preserve various groups of species. Boreal agricultural biodiversity and in particular, distribution and richness of threatened species is strongly associated with various grasslands. Further, heterogeneous agricultural landscapes characterized by moderate field size, forest patches and non-crop agricultural habitats enhance the biodiversity of rural environments. From the landscape ecological perspective, the major threats to Finnish agricultural biodiversity are the decline of connected grassland habitat networks, and general homogenization of landscape structure resulting from both intensification and marginalization of agriculture. The maintenance of key habitats, such as meadows and pastures is an essential task in conservation of agricultural biodiversity. Furthermore, a larger landscape context should be incorporated in conservation planning and decision making processes in order to respond to the needs of different species and to maintain heterogeneous rural landscapes and viable agricultural diversity in the future.

Business Development Efforts and Performance Improvements in SMEs Case Study of Business Development Projects Implemented in SME

Under the circumstances of the increasing market pressure, enterprises try to improve their competitive position by development efforts, and a business development project is one tool for that. There are not many answers to the question of how the development projects launched to improve the business performance in SMEs have succeeded. Theacademic interest in the business development project success has mainly focused on projects implemented in larger organisations rather than in SMEs. The previous studies on the business success of SMEs have mainly focused on new business ventures rather than on existing SMEs. However, nowadays a large number of business development projects are undertaken in existing SMEs, where they can pose a great challenge. This study focuses on business development success in SMEs thathave already established their business. The objective of the present study is to gain a deep understanding on business development project success in the SME-context and to identify the dimensions and factors affecting the project success. Further, the aim is to clarify how the business development projects implemented in SMEs have affected their performance. The empirical evidence is based on multiple case study. This study builds a framework for a generic theory of business development success in the SME-context, based on literature from the areas ofproject and change management, entrepreneurship and small business management, as well as performance measurement, and on empirical evidence from SMES. The framework consists of five success dimensions: entrepreneurial, project preparation, change management, project management and project success. The framework provides a systematic way for analysing the business development project and its impact on the performance and on the performing company. This case evidence indicates that successful business development projects have a balanced, high performance concerning all the dimensions. Good performance in one dimension is not enoughfor the project success, but it gives a good ground for the other dimensions. The other way round, poor performance in one success dimension affects the others, leading to poor performance of the project. In the SME-context the business development project success seems to be dependent on several interrelated dimensions and factors. Success in one area leads to success in other areas, and so creates an upward success spiral. Failure in one area seems to lead to failure in other areas, creating a downward failure spiral. The study indicates that the internal business development projects have affected the SMEs' performance widely also on areas and functions not initially targeted. The implications cover all thesuccess categories: the project efficiency, the impact on the customer, the business success and the future potentiality. With successful cases, the success tends to spread out to areas and functions not mentioned as the project goals, andwith unsuccessful cases the failure seems to spread out widely to the SMEs' other functions. This study also indicates that the most important key factors for successful business development project implementation are the strength of intention, business ability, knowledge, motivation and participation of the employees, as well as adequate and well-timed training provided to the employees.

Learning in Product Development Projects - Responding to challenges in global industrial company

Verkostoitunut kansainvälinen tuotekehitys on tärkeä osa menestystä nykypäivän muuttuvassa yritysmaailmassa. Toimintojen tehostamiseksi myös projektitoiminnot on sopeutettava kansainväliseen toimintaympäristöön. Kilpailukyvyn säilyttämiseksi projektitoimintoja on lisäksi jatkuvasti tehostettava. Yhtenäkeinona nähdään projektioppiminen, jota voidaan edistää monin eri tavoin. Tässätyössä keskitytään projektitiedonhallinnan kehittämisen tuomiin oppimismahdollisuuksiin. Kirjallisuudessa kerrotaan, että projektitiedon jakaminen ja sen hyödyntäminen seuraavissa projekteissa on eräs projektioppimisen edellytyksistä. Tämäon otettu keskeiseksi näkökulmaksi tässä tutkimuksessa. Lisäksi tutkimusalueen rajaamiseksi työ tarkastelee erityisesti projektioppimista kansainvälisten tuotekehitysprojektien välillä. Työn tavoitteena on esitellä keskeisiä projektioppimisen haasteita ja etsiä konkreettinen ratkaisu vastaamaan näihin haasteisiin. Tuotekehitystoiminnot ja kansainvälinen hajautettu projektiorganisaatio kohtaavat lisäksi erityisiä haasteita, kuten tiedon hajautuneisuus, projektihenkilöstön vaihtuvuus, tiedon luottamuksellisuus ja maantieteelliset haasteet (esim. aikavyöhykkeet ja toimipisteen sijainti). Nämä erityishaasteet on otettu huomioon ratkaisua etsittäessä. Haasteisiin päädyttiin vastaamaan tietotekniikkapohjaisella ratkaisulla, joka suunniteltiin erityisesti huomioiden esimerkkiorganisaation tarpeet ja haasteet. Työssä tarkastellaan suunnitellun ratkaisun vaikutusta projektioppimiseen ja kuinka se vastaa havaittuihin haasteisiin. Tuloksissa huomattiin, että projektioppimista tapahtui, vaikka oppimista oli vaikea suoranaisesti huomata tutkimusorganisaation jäsenten keskuudessa. Projektioppimista voidaan kuitenkin sanoa tapahtuvan, jos projektitieto on helposti koko projektiryhmän saatavilla ja se on hyvin järjesteltyä. Muun muassa nämä ehdot täyttyivät. Projektioppiminen nähdään yleisesti haastavana kehitysalueena esimerkkiorganisaatiossa. Suuri osa tietämyksestä on niin sanottua hiljaistatietoa, jota on hankala tai mahdoton saattaa kirjalliseen muotoon. Näin olleen tiedon siirtäminen jää suurelta osin henkilökohtaisen vuorovaikutuksen varaan. Siitä huolimatta projektioppimista on mahdollista kehittää erilaisin toimintamallein ja menetelmin. Kehitys vaatii kuitenkin resursseja, pitkäjänteisyyttä ja aikaa. Monet muutokset voivat vaatia myös organisaatiokulttuurin muutoksen ja vaikuttamista organisaation jäseniin. Motivaatio, positiiviset mielikuvat ja selkeät strategiset tavoitteet luovat vakaan pohjan projektioppimisen kehittämiselle.

Suomen PK -rakennusyritysten kilpailukyky

Tutkimuksen tavoitteena on tutkia Suomen PK -rakennusyritysten kilpailukykyä yleensä sekä antaa parannusehdotuksia rakennusalan kansallisen kilpailukyvyn parantamiseksi. Tutkimusaineisto on koottu sekä kirjallisuustutkimuksena että tekemällä haastattelututkimus Rakennusteollisuus RT ry:n talonrakennusjaoston jäsenyritysten omistajille. Saatuja tuloksia on syvennetty Rakennusteollisuus RT ry:n talonrakennusjaoston jäsenyritysten kehitysjohtajille suunnatuilla workshop -menettelyllä. Tutkimuksessa esitetyt mallit pyrkivät löytämään tekijöitä, joiden avulla kilpailukyky olisi selkeästi määriteltävissä. Measuring Construction Competitiveness in Selected Countries -tutkimuksen luoma kilpailukykykuutio ja sen käyttäminen tässä tutkimuksessa muodostavat kilpailukyvyn osa-alueiden käsittelytavalle tutkimuksessa käytetyn viitekehyksen. Tutkimuksessa esitettyjen kilpailukykyä vahvistavien tekijöiden huomattiin siirtyneen puhtaasta sopimuksenhallinnasta alueellista yhteistyötä rakentamisen osapuolien välillä korostavaan suuntaan. Rakentaminen halutaan nähdä useiden toimijoiden sopuisana suorituksena, missä yhdessä sopimisella on keskeinen merkitys. Suomen PK -rakennusyritysten kilpailukyvyn parantamiseen tähtääviä toimenpide-ehdotuksia olivat rakennusalan eri toimijoiden verkottuminen sekä yrityksen henkilöresurssien motivointi.

Tiedon jakaminen heterogeenisessa projektiverkostossa

Tutkielman tavoitteena on selvittää, mitkä tekijät vaikuttavat tiedon jakamiseen heterogeenisessa projektiverkostossa. Tutkielma sisältää sekä teoreettisen että empiirisen osan. Teoriaosassa käsitellään kahta pääaihetta: tiedon jakamisen verkostomaista kontekstia ja projektiverkostoon sekä sen toimijoihin liittyviä, tiedon jakamiseen vaikuttavia tekijöitä. Empiirinen osuus sisältää kvalitatiivisen haastattelututkimuksen, missä on kerätty case-projektin toimijoiden mielipiteitä niistä seikoista, jotka vaikuttavat tiedon jakamiseen projektiverkostossa. Tutkielman lopuksi kirjallisuuskatsauksen ja haastattelujen tuloksia on verrattu toisiinsa. Tutkielman tulosten perusteella voidaan todeta, että tiedon jakamiseen vaikuttavat projektiverkoston rakenne, projektikumppaneiden motivaatio, osaaminen ja resurssit, projektintarjoama tiedon jakamisen infrastruktuuri, projektin päämäärän selkeys, projektin toimintaa varten laaditut pelisäännöt, sekä projektikoordinaattorin kyky johtaa ja ohjata projektin toimintaa.

Prosessien hallinnastako avain tuloksellisempaan valtionhallintoon?

Valtionhallinnon muutosprosessissa on huomattu tulosohjaukseen liittyvät rakenteelliset ongelmat. 2000-luvun puolivälissä prosessiajattelu nousee uudelleen esiin. Sitä esitetään aidosti ratkaisumalliksi julkisten palvelujen järjestämiseen. Prosessit ovattulleet ajankohtaisiksi. Tutkielman päätavoitteena oli prosessijohtamisen ja muutosjohtamisen lähtökohtien syventäminen. Alatavoitteina olivat prosessien suoritusmittarit ja onnistuneen muutoshallinnan avaintekijät. Tutkimus perustuu lähdekirjallisuuteen ja asiantuntijoiden haastatteluihin. Prosessilähtöisyys valtionhallinnossa on huomion kiinnittämistä ulkoisen asiakkaan tarpeiden tyydyttämiseen sekä yhteiskunnallisten vaikuttavuustavoitteiden saavuttamiseen. Muutos vaatiinimenomaan johtamista sekä sitkeyttä ja vastarinnan sietämistä. Lisäksi se vaatii johdon sitoutumista ja määrätietoista työtä tavoitteiden saavuttamiseksi. Rohkeus ja avoimuus uusille asioille ovat myös tärkeitä. Valtionhallinnon organisaatioissa tarvitaan lähitulevaisuudessa entistä enemmän muutosagentteja, muutosjohtajia ja uudenlaista osaamista.

Yrityksen arvoa lisäävä tuotekehitys Case Ovako Imatra

Tutkimuksen tavoitteena oli tapaustutkimuksen avulla analysoida case yrityksen tuotekehitystoiminnan menestyksen kulmakivet ja edellytykset yrityksen arvon lisäämiseksi. Case osa toteutettiin kolmen toisiaan tukevan aineiston avulla. Tiedonkeruumenetelminä olivat haastattelu, kyselytutkimussekä yrityksessä toteutettujen projektien analysointi. Tutkielman teoriaosan ensimmäisessä vaiheessa analysoitiin tuotekehityksen avaintekijöitä. Käsittelyn lähtökohtana toimi kolme tuotekehityksen perustekijää: tuotestrategia, kehitysprosessi ja saatavilla olevat resurssit. Teoriaosuudessa analysoitiin myös tuotekehitystoiminnan menestyksen mittaamista. Kolmas osa kirjallisuusosuudessa on tuotekehitykseen olennaisesti kuuluva riskien tunnistaminen ja hallinta. Tutkielman empiirisessä osiossa nostettiin esiin kohdeyrityksen tuotekehitystoiminnan tärkeimmät tekijät. Tulokseksi saatiin, että asiakasyhteistyö, tuotteen laadun varmistava projektin toteutus sekä resurssien määrä määrittävät pitkälti tuotekehitystoiminnan tason yrityksessä. Näiden tekijöiden onnistuneella yhteensovittamisella yritys pystyy säilyttämään kilpailuasemansa. Pitkän aikavälin arvoa lisäävä tuotekehitystoiminta edellyttää edellä olleiden tekijöiden ohella myös panostusta innovatiivisuuteen, riskinhallintanäkökulman huomioimiseen projektien valinnassa sekä tuotetun arvon mittaamiseen. Kilpailuedun saavuttaminen uusilla innovatiivisilla tuotteilla, joustavuuden lisääminen projekteihin sekä oppiminen toteutetuista hankkeista ovat avaintekijöitä tulevaisuuden menestykselle

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Web-palvelutekniikka teollisuuden tietojärjestelmäintegraation kehitysvälineenä

Tänä päivänä tiedon nopea saatavuus ja hyvä hallittavuus ovat liiketoiminnan avainasioita. Tämän takia nykyisiä tietojärjestelmiä pyritään integroimaan. Integraatio asettaa monenlaisia vaatimuksia, jolloin sopivan integraatiomenetelmän ja -teknologian valitsemiseen pitää paneutua huolella. Integraatiototeutuksessa tulisi pyrkiä ns. löyhään sidokseen, jonka avulla voidaan saavuttaa aika-, paikka- ja alustariippumattomuus. Tällöin integraation eri osapuolien väliset oletukset saadaan karsittua minimiin, jonka myötä integraation hallittavuus ja vikasietoisuus paranee. Tässä diplomityössä keskitytään tutkimaan nykyisin teollisuuden käytössä olevien integraatiomenetelmien ja -teknologioiden ominaisuuksia, etuja ja haittoja. Lisäksi työssä tutustutaan Web-palvelutekniikkaan ja toteutetaan asynkroninen tiedonkopiointisovellus ko. teknologian avulla. Web-palvelutekniikka on vielä kehittyvä palvelukeskeinen teknologia, jolla pyritään voittamaan monet aiempia teknologioita vaivanneet ongelmat. Yhtenä teknologian päätavoitteista on luoda löyhä sidos integroitavien osapuolien välille ja mahdollistaa toiminta heterogeenisessa ympäristössä. Teknologiaa vaivaa kuitenkin vielä standardien puute esimerkiksi tietoturva-asioissa sekä päällekkäisten standardien kehitys eri valmistajien toimesta. Jotta teknologia voi yleistyä, on nämä ongelmat pystyttävä ratkaisemaan.

Hyvän hyötysuhteen moottorilla saavutettavat säästöt

Työssä on tutkittu milloin kannattaa hankkia hyvän hyötysuhteen moottori tavallisen moottorin sijasta. Työ on tehty UPM-Kymmene Oyj:n Kaukaan tehtailla. Ensiksi selvitettiin millaisessa kuormassa moottorit Kaukaan sellu- ja paperitehtaalla käyvät. Sen jälkeen työssä laskettiin, milloin hyvän hyötysuhteen moottorilla saavutetaan niin suuret säästöt, että se kannattaa hankkia. Hyvän hyötysuhteen moottorin hankinnalle laskettiin myös takaisinmaksuaika ja sisäinen korko. Herkkyysanalyysillä tutkittiin muuttuuko moottori-investoinnin kannattavuus, kun hankkeen kriittisiä tekijöitä muutetaan. Oleellista moottori-investoinnissa on moottoreiden hinta ja hyötysuhde-ero sekä moottorin käyntiaika ja kuormitusprosentti. Työn perusteella selvisi, että ainakin pienet moottorit kannattaa hankkia hyvän hyötysuhteen moottoreina.