Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

TransPromo communication as a part of company’s marketing communications when the e-bill is a medium

The goal of this thesis was to research what TransPromo is, why companies want to implement TransPromo communication, and what the elements of effective Transpromo communication are. Furthermore, the goal was to develop a TransPromo communication strategy and a normative model for TeliaSonera Finland, which depicts the elements of effective TransPromo communication when the electronic bill is a medium. Abductive reasoning was utilized in this thesis, which means that empirical and theoretical worlds are alternating in researcher’s reasoning process. This thesis didn’t rely on any specific theory nor did it utilize any previous theoretical model. However, certain theoretical connections existed so this thesis cannot be considered purely inductive. The empirical part of this thesis was conducted by examining secondary industry data and by conducting specialist interviews at TeliaSonera Finland and Strålfors. Grounded Theory approach was utilized in the analysis of the interview data and content analysis was used in the analysis of secondary industry data. This thesis increases knowledge in the area of TransPromo communication, and provides one definition of TransPromo communication. As a result of this thesis, a TransPromo communication strategy and a normative model for TeliaSonera Finland was built. The model depicts the elements of the effective TransPromo communication when the e-bill is a medium. The TranPromo communication objective is to utilize transaction documents, such as bills, in order to deliver targeted and personalized marketing messages to current customers. The aim is to strengthen the customer relationship, and to enforce up-sell and cross-sell opportunities and cost savings.

Determination of slurry’s viscosity using case based reasoning approach

Case-based reasoning (CBR) is a recent approach to problem solving and learning that has got a lot of attention over the last years. In this work, the CBR methodology is used to reduce the time and amount of resources spent on carry out experiments to determine the viscosity of the new slurry. The aim of this work is: to develop a CBR system to support the decision making process about the type of slurries behavior, to collect a sufficient volume of qualitative data for case base, and to calculate the viscosity of the Newtonian slurries. Firstly in this paper, the literature review about the types of fluid flow, Newtonian and non-Newtonian slurries is presented. Some physical properties of the suspensions are also considered. The second part of the literature review provides an overview of the case-based reasoning field. Different models and stages of CBR cycles, benefits and disadvantages of this methodology are considered subsequently. Brief review of the CBS tools is also given in this work. Finally, some results of work and opportunities for system modernization are presented. To develop a decision support system for slurry viscosity determination, software application MS Office Excel was used. Designed system consists of three parts: workspace, the case base, and section for calculating the viscosity of Newtonian slurries. First and second sections are supposed to work with Newtonian and Bingham fluids. In the last section, apparent viscosity can be calculated for Newtonian slurries.

Marketers’ perception of the implementation of social media marketing: Evidence from large Finnish companies’ marketing campaigns

Social media is a multidimensional marketing and communications channel which can support and enhance a business’ reputation, sales and even longevity. Social media as a business tool encourages an interaction between customers and companies which gives opportunities for a company to better understand their customers, to target them more effectively and to collaborate and create dialogues with them which is not possible through traditional media channels. The aim of a social media strategy is to increase brand awareness, image, loyalty and recognition. The peer networks that social media creates allows a company to disseminate information through loyal customers to new and prospective customers to ultimately increase reach. The purpose of the study is to understand the marketer’s perspective of social media marketing use and how it is currently utilized in marketing and communications activities in Finland. Three companies were interviewed covering fourteen different implementations of social media marketing campaigns. These were then analysed to ascertain the utilization methods and experience gained on recent campaigns in the Finnish market The utilization of social media marketing was analysed using the methods of thematic analysis and inductive and abductive reasoning. Elements and themes were drawn out of the separate interviews to create a framework with which to explore, evaluate and match theories that define social media usage by companies. It became clear from all of the interviews that social media as a tool is most effective when it captures the viewer’s interest through rich and entertaining content. This directed the theoretical research towards Engagement Theory and Content Marketing which look to emphasize the importance of communities, collaboration, interaction, and peer-sharing as the key drivers of a social media marketing campaign.

Kallet til livets embete : mødre i helse og lidelse

Mothers represent the natural caring. Natural caring is the object of caring science and of research interest because it establishes the central core of professional caring. In this study, we encounter patients who are mothers in need of care in a psychiatric context. Motherhood involves taking responsibility that extends beyond one's own life, because the child represents possibilities in a yet unknown future. Understanding and knowledge about the mothers' struggle in health and suffering are of crucial importance to enable clinical practice to make provisions for and adapt to the individual patient. The overall purpose of this dissertation is to illuminate how the innermost essence of caring emerges in health and suffering in patients who are mothers in psychiatric care. The purpose of the study in a clinical sense is to seek to understand and illuminate the patient's inner world in health and suffering in terms of contextual, existential, ontological and ethical dimensions. The dissertation is exploratory and descriptive in nature and encompasses induction, deduction and abduction as logics tools of reasoning. A theoretical model of natural caring and a universal theoretical model of the innermost essence of caring is developed as seen from the patient's world in a psychiatric context. The dissertation is anchored in human science's view of the human being and the world and in caring science's perspective. Caring science's view of the human being as a unity comprising body, soul and spirit is central in the study's concept of the patient. This multi-dimensional conception of the human being encompasses the dissertation's basic values and is decisive for choice of methodology. Hermeneutic epistemology guided the interpretation of the empirical data, the paradigmatic theses and assumptions. The dialectical movement in interpretation moves back and forth between empirical data, caring science theory and philosophical theory and reveals deeper insight into meaningful content in the clinical context. The interpretation process comprises four levels of abstraction: rational, contextual, existential and ontological. Hermeneutic philosophy guides the inductive and deductive approach to interpretation, as well as the movement between the clinical context and the caring science paradigm. In this encounter between the visible and invisible reality, the image of natural caring – motherliness emerged. The dissertation consists of four studies. The first study is a systematic review of nineteen research articles. The three other studies are hermeneutical interpretations based on text materials from open interviews. Fifteen participants were interviewed, all of whom are mothers of children between 0 and 18 years of age. All were outpatients in the psychiatric specialist health service. In the interpretation process, the mothers' struggle in health and suffering emerges as a struggle between the inner and outer world. Being a mother and patient in health and suffering in a psychiatric context means to struggle to be oneself, to create oneself, to live and realize one's good deeds as a mother and human being. To be oneself, to possess oneself as a mother is not only a question of tending, playing and learning in order to master a practical situation or to survive. It involves constituting a deep, inner desire to courageously create oneself so that the child is able to realize his or her potential in health and suffering. Motherliness manifests itself in caring as a call to ministering humanity and life. The voice of motherliness is understood as the voice of life—the eternal, inner call of love and freedom. The inner call craves fulfilment. Motherliness in natural caring does not retreat. Motherliness defines the Other as freedom and proceeds without regard for all other exterior requirements to realizing wellbeing. The inner essence of caring is attentive, aware and heeds the call of the heart. The innermost essence of caring is to be and to make oneself responsible for the Other. Responsibility cannot be relinquished; free choice consists in whether or not to follow the call. To renounce the inner call to responsibility is to deny oneself and one's dignity as a human being. The theoretical models provide clinical and systematic caring science with knowledge and understanding based on the natural caring spirit inherent in the human being. The study elucidates and strengthens the ontological basic assumptions about the human being as a unity of body, soul and spirit, the sanctity of the human being and the core of caring, ethos. The results of the dissertation will provide clinical practice with knowledge about the inner movements of the mothers' souls in relation to their responsibility as mothers and human beings. Being able to understand the basic conditions for responsibility is crucial for developing care that encompasses mother and child and the mutual relationship between them. This is basic knowledge for developing attitudes and actions that meet and provide for the needs of the patient as mother and as a whole, suffering human being.

Reasoning over knowledge-based generation of situations in context spaces to reduce food waste

With the ever-growing amount of connected sensors (IoT), making sense of sensed data becomes even more important. Pervasive computing is a key enabler for sustainable solutions, prominent examples are smart energy systems and decision support systems. A key feature of pervasive systems is situation awareness which allows a system to thoroughly understand its environment. It is based on external interpretation of data and thus relies on expert knowledge. Due to the distinct nature of situations in different domains and applications, the development of situation aware applications remains a complex process. This thesis is concerned with a general framework for situation awareness which simplifies the development of applications. It is based on the Situation Theory Ontology to provide a foundation for situation modelling which allows knowledge reuse. Concepts of the Situation Theory are mapped to the Context Space Theory which is used for situation reasoning. Situation Spaces in the Context Space are automatically generated with the defined knowledge. For the acquisition of sensor data, the IoT standards O-MI/O-DF are integrated into the framework. These allow a peer-to-peer data exchange between data publisher and the proposed framework and thus a platform independent subscription to sensed data. The framework is then applied for a use case to reduce food waste. The use case validates the applicability of the framework and furthermore serves as a showcase for a pervasive system contributing to the sustainability goals. Leading institutions, e.g. the United Nations, stress the need for a more resource efficient society and acknowledge the capability of ICT systems. The use case scenario is based on a smart neighbourhood in which the system recommends the most efficient use of food items through situation awareness to reduce food waste at consumption stage.

Induktiosilmukka kuulolaitteen käyttäjän apuvälineenä

Tämä insinöörityö tehtiin Kuulonhuoltoliitto ry:n Esteetön kuuntelu -projektille. Työ käsittelee kuulolaitteen käyttäjän apuvälineenä käytettäviä induktiosilmukkajärjestelmiä. Induktiivisen äänensiirtojärjestelmän avulla huonokuuloinen saa kuunteluympäristöstään paremman signaali-kohinasuhteen ilman tilan kaikua ja taustahälyä. Tämä helpottaa kuuntelua esimerkiksi puhetilaisuuksissa. Työn tarkoituksena oli päivittää aiempia tutkimuksia kokoamalla uusin tietous induktiosilmukoiden tekniikasta. Kirjallisuustutkimuksen lisäksi kartoitettiin nykyinen silmukkavahvistinkanta haastattelemalla maahantuojia ja jälleenmyyjiä. Silmukkavahvistimien hintakartoituksen tarkoituksena oli rakentaa perusteet sopivan tehoisen ja hintaisen vahvistimen hankintaa varten suunniteltaessa induktiivisella äänensiirtojärjestelmällä varustettavia tiloja. Työ tarkastelee induktiivisen äänensiirtojärjestelmän ensisijaisen kohderyhmän, kuulokojeita käyttävien huonokuuloisten keskeisiä tarpeita ja heidän käyttämäänsä apuvälinetekniikkaa. Työ käy läpi audiotekniikan perusteita, sähkömagneettisen induktioilmiön, induktiivisen äänensiirtojärjestelmän rakenteen, sen ylikuulumisongelmat ja häiriötekijät sekä IEC:n 60118-4 edition 2.0 standardin CDV-luonnoksen mukaiset periaatteelliset asennusja mittausohjeet. IEC:n tuleva standardi tekee työstä ajankohtaisen. Työn tuloksena saatua tietoa voidaan käyttää Kuulonhuoltoliitto ry:n opas- ja tiedotusmateriaalin uudistamisessa, pohjana hyvän kuunteluympäristön malliratkaisujen ja esteettömyyskriteerien soveltamisessa. Työstä on hyötyä erityisesti Kuulonhuoltoliitto ry:n vapaaehtoiskartoittajille kuten myös kenelle tahansa aiheesta syvemmin kiinnostuneelle.

Patient-perceived health-related quality of life during recovery after total hip arthroplasty – a 6-month follow-up study

Potilaiden käsitys terveyteen liittyvästä elämänlaadusta lonkan tekonivelleikkauksen jälkeisenä toipumisaikana – kuuden kuukauden seurantatutkimus Tässä kaksivaiheisessa seurantatutkimuksessa tarkasteltiin potilaiden käsitystä terveyteen liittyvästä elämänlaadusta lonkan tekonivelleikkauksen jälkeisenä toipumisaikana. Tutkimuksen ensimmäisessä vaiheessa tarkoituksena oli sekä kuvailla potilaiden kokemuksia potilaana olosta, saamastaan hoidosta ja terveyspalveluorganisaatiosta että analysoida aikaisempien tutkimusten perusteella leikkauksen tuloksia potilaan kannalta. Toisessa vaiheessa tarkoituksena oli arvioida potilaiden kokemaa elämänlaatua leikkauksen jälkeen, ja sitä vaikuttivatko primaaritulokset (fyysinen toimintakyky, kipu, ahdistus) tai taloudelliset seuraukset (potilaiden itsensämaksamat kustannukset, palvelujen käyttö) terveyteen liittyvään elämänlaatuun. Tutkimuksen tavoitteena oli löytää mahdolliset kriittiset ajankohdat tai tekijät, jotka saattavat hidastaa toipumista ja siten huonontaa potilaiden elämänlaatua. Tätä tietoa voidaan käyttää hoitotyössä kun suunnitellaan sopivaa hoitoa ja tukea toipumisajalle. Tutkimuksen ensimmäisessä vaiheessa primaarileikkaukseen tulevat potilaat (n = 17) kuvailivat teemahaastatteluissa kokemuksiaan kahdesti leikkauksen jälkeen. Haastatteluaineisto analysoitiin induktiivisella sisällönanalyysilla. Lisäksi 17 tutkimusartikkelista analysoitiin deduktiivisella sisällönanalyysilla leikkauksen tuloksia potilaalle, tuloksiin vaikuttavia tekijöitä ja käytetyt tutkimusmetodit. Toisessa vaiheessa primaari- tai revisioleikkaukseen tulevat potilaat (n = 100) arvioivat leikkauksen tuloksia kuuden kuukauden ajan leikkauksen jälkeen: terveyteen liittyvää elämänlaatua, primaarituloksia ja taloudellisia seurauksia. Aineisto kerättiin erilaisilla mittareilla: Sickness Impact Profile, Finnish Version, Stait-Trait Anxiety Inventory, ja Numeric Rating Scale. Lisäksi käytettiin tätä tutkimusta varten tehtyjä kyselylomakkeita: Fyysinen toimintakyky-mittari, Palvelujen käyttö-mittari ja Kustannusmittari. Tutkimuksen toiseen vaiheen tulokset analysoitiin tilastollisilla menetelmillä. Potilaiden terveyteen liittyvä elämänlaatu parani ja kipu lievittyi leikkauksen jälkeen ja fyysinen toimintakyky lisääntyi toipumisaikana. Positiivisista muutoksista huolimatta potilaat kokivat ahdistusta samassa määrin kuin ennen leikkaustakin. Palvelujen käyttö vaihteli toipumisajan kuluessa ja potilaiden maksamissa kustannuksissa oli suuria vaihteluita. Fyysisen toimintakyvyn lisääntyminen ja kivun lieveneminen paransivat terveyteen liittyvää elämänlaatua. Sen sijaan huonompi elämänlaatu toipumisaikana oli yhteydessä suurempaan palvelujen käyttöön, kun taas kustannuksilla ei ollut yhteyttä elämänlaatuun. Potilaiden ominaispiirteet tulisi ottaa enemmän huomioon suunniteltaessa sopivaa leikkauksenjälkeistä hoitoa ja tukea. Potilaat tarvitsevat yksilöllisiä ohjeita, sillä monet taustatekijät (esim. ikä, sukupuoli, preoperatiivinen kipu, siviilisääty, ja leikkaustyyppi) vaikuttavat toipumiseen.

Oops! Another medication error : a literature review of contributing factors and methods to prevent medication errors

The purpose of this bachelor's thesis was to chart scientific research articles to present contributing factors to medication errors done by nurses in a hospital setting, and introduce methods to prevent medication errors. Additionally, international and Finnish research was combined and findings were reflected in relation to the Finnish health care system. Literature review was conducted out of 23 scientific articles. Data was searched systematically from CINAHL, MEDIC and MEDLINE databases, and also manually. Literature was analysed and the findings combined using inductive content analysis. Findings revealed that both organisational and individual factors contributed to medication errors. High workload, communication breakdowns, unsuitable working environment, distractions and interruptions, and similar medication products were identified as organisational factors. Individual factors included nurses' inability to follow protocol, inadequate knowledge of medications and personal qualities of the nurse. Developing and improving the physical environment, error reporting, and medication management protocols were emphasised as methods to prevent medication errors. Investing to the staff's competence and well-being was also identified as a prevention method. The number of Finnish articles was small, and therefore the applicability of the findings to Finland is difficult to assess. However, the findings seem to fit to the Finnish health care system relatively well. Further research is needed to identify those factors that contribute to medication errors in Finland. This is a necessity for the development of methods to prevent medication errors that fit in to the Finnish health care system.

Careers of Managers, Comparison between ICT and Paper Business Sectors

The purpose of this study is to increase understanding of how the managers build their early career in information and communication technology industry (ICT business sector) and pulp- and paper industry (paper business sector). The focus of the study is to explore the importance differing a business sectors have in influencing managerial careers. Business sectors can affect careers in several ways.Sectors have different history and traditions. Also the age structure of ICT personnel differs from the age structure of personnel in the paper industry. Managers in the ICT and paper sector are technically educated but in different disciplines. Differences exist also in ways of recruiting and developing commitment inpersonnel. The target group of this research, middle management engineering personnel, work in Finnish ICT and paper companies. Research data were gathered in April-December 2002 in South-Karelia by interviewing 30 managers and six directors working in three Finnish ICT companies and in three paper companies. The research issue is approached on two levels: the individual level and the organizational level. The managers related their career stories in focused interviews. Directors, representing the organizations, described the generalities of the business sector and gave background information on company policies, human relationshippractices, as well as career and human resource development. Results of the study contribute to research discussions of career, life-span reasoning, socialization and commitment. Career is conceived as a series of positions including everykind of hierarchical mobility and all kinds of positions in work. A manager's career develops in interaction with the organization and it can be seen as involving a socializing process in an organization as a consequence of experiences andchanges in positions. This research contributes to the understanding of the nature of career in the context of two business sectors. Universal career theories,for the most part, do not perceive the importance of business sector in determining career experience. This study concentrates on describing and understanding early careers in two different business areas, elements committing managers to particular business sectors and the actions of companies in that particular sector. While career research began in the middle of 1950s, the theoretical basis of career research seems to be quite fragmented still. However, a dichotomy is consistently presented between traditional, hierarchical career research and boundaryless career thinking. In this research we examine how these old and new career concepts are evidence in the ICT and paper sectors. Careers are changing from formal, hierarchy-based structures to more fluid arrangements. The new boundaryless career concept captures territory from old career thinking. Mobility between employers, networks, and changing hierarchical structures in organizations, as well as personal and family reasons are theorized to bring changes to careers patterns in the future. However, the pace of this change in careers will vary between the ICT and paper business sectors. Findings of this research indicate that business sector has an effect on how managerial careers develop. The environment where career is developed differs between ICT and paper sectors. Careers begin differently in the two environments and the speed of career progression is distinct. ICT careers are built within the business sector whereas paper careers are made inside one company. Also recruiting and socialization practices differ from one sector to the other.

A mathematical study of fuzzy logic; an algebraic approach

Fuzzy set theory and Fuzzy logic is studied from a mathematical point of view. The main goal is to investigatecommon mathematical structures in various fuzzy logical inference systems and to establish a general mathematical basis for fuzzy logic when considered as multi-valued logic. The study is composed of six distinct publications. The first paper deals with Mattila'sLPC+Ch Calculus. THis fuzzy inference system is an attempt to introduce linguistic objects to mathematical logic without defining these objects mathematically.LPC+Ch Calculus is analyzed from algebraic point of view and it is demonstratedthat suitable factorization of the set of well formed formulae (in fact, Lindenbaum algebra) leads to a structure called ET-algebra and introduced in the beginning of the paper. On its basis, all the theorems presented by Mattila and many others can be proved in a simple way which is demonstrated in the Lemmas 1 and 2and Propositions 1-3. The conclusion critically discusses some other issues of LPC+Ch Calculus, specially that no formal semantics for it is given.In the second paper the characterization of solvability of the relational equation RoX=T, where R, X, T are fuzzy relations, X the unknown one, and o the minimum-induced composition by Sanchez, is extended to compositions induced by more general products in the general value lattice. Moreover, the procedure also applies to systemsof equations. In the third publication common features in various fuzzy logicalsystems are investigated. It turns out that adjoint couples and residuated lattices are very often present, though not always explicitly expressed. Some minor new results are also proved.The fourth study concerns Novak's paper, in which Novak introduced first-order fuzzy logic and proved, among other things, the semantico-syntactical completeness of this logic. He also demonstrated that the algebra of his logic is a generalized residuated lattice. In proving that the examination of Novak's logic can be reduced to the examination of locally finite MV-algebras.In the fifth paper a multi-valued sentential logic with values of truth in an injective MV-algebra is introduced and the axiomatizability of this logic is proved. The paper developes some ideas of Goguen and generalizes the results of Pavelka on the unit interval. Our proof for the completeness is purely algebraic. A corollary of the Completeness Theorem is that fuzzy logic on the unit interval is semantically complete if, and only if the algebra of the valuesof truth is a complete MV-algebra. The Compactness Theorem holds in our well-defined fuzzy sentential logic, while the Deduction Theorem and the Finiteness Theorem do not. Because of its generality and good-behaviour, MV-valued logic can be regarded as a mathematical basis of fuzzy reasoning. The last paper is a continuation of the fifth study. The semantics and syntax of fuzzy predicate logic with values of truth in ana injective MV-algerba are introduced, and a list of universally valid sentences is established. The system is proved to be semanticallycomplete. This proof is based on an idea utilizing some elementary properties of injective MV-algebras and MV-homomorphisms, and is purely algebraic.

Adding Value to Message Mediation in Multioperator MMS Network Architecture

Mobiiliviestintään käytetystä lyhytsanomapalvelusta (Short Messaging Service, SMS) on tullut ilmiömäinen menestys. SMS-palvelulle on tulossa seuraaja, jota kutsutaan monimediaviestipalveluksi (Multimedia Messaging Service, MMS). MMS-viestit voivat sisältää useita erilaisia kuva-, ääni- ja videoformaatteja. Vaikka yhteensopimattomia SMS-keskuksia yhdistämään tarvitaan Intellitel Messaging Gatewayn kaltaisia sanomanvälitystuotteita, ei tällainen SMS-keskeinen lähestyminen sanomanvälitykseen ole MMS-kykyisen sanomanvälittimen kannalta järkevä ratkaisu. MMS-kykyisen sanomanvälittimen täytyy lisätä arvoa itse sanomanvälitysprosessiin, jotta tuotteesta tulisi menestyksekäs. Tässä työssä käsitellään MMS-sanomanvälityksen ongelmallisuuksia. Erityisesti painotetaan MMS-kykyisen sanomanvälittimen kehittämistä olemassaolevasta SMS-sanomanvälitintuotteesta, sekä selvitetään syitä arvonlisäyksen välttämättömyydelle. Työssä esitetään myös erilaisia arvonlisäystapoja MMS-sanomanvälitykseen. Eräitä esitetyistä arvonlisäystavoista käytetään käytännön osassa toteutetussa Nokian MMS-keskuksen MM7/VAS-rajapintaan kytkeytymään kykenevässä sanomanvälityskomponentissa.

Palveluyrityksen strateginen ohjaus ja tavoiteasetanta tiimiorganisaatiossa. Case: Etelä-Karjalan Osuuspankki

Tutkielman tavoitteena oli selvittää talouden ohjauksen tila case -yrityksessä, pyrkiä tunnistamaan kehityskohteita ohjauksessa ja ehdottaa mallia, joka huomioi tunnistetut kehittämiskohteet. Teoriaosassa analysoidaan yrityksen ohjausta aiemman teoreettisen kirjoittelun perusteella ja esitetään käsitteet sekä viitekehys. Empiirisessä osassa analysoidaan case -yrityksen ohjauksen nykytilaa ja tunnistetaan kehityskohteita ohjauksessa. Tutkielmassa on käytetty sekä hermeneuttista että normatiivista tutkimusotetta Tutkimuksessa havaittiin strategian jalkautumisen jäävän puutteelliseksi ja tämän vaikeuttavan tavoitteiden takana olevan ajattelun ymmärtämistä. Tavoitteisiin sitoutumista vaikeutti myös näkemys, jonka mukaan tavoitteet tulivat liikaa annettuina tekijöinä. Tutkielman lopuksi kehitettiin case-yritykselle tavoiteasetantamalli, jonka nähtiin auttavan strategian jalkauttamista ja sitouttamista yrityksen myyntitavoitteisiin.