Inventory of sparse forest populations using adaptive cluster sampling

Abstract

Evaluation of performance analysis software for Linux computing cluster

Tietokonejärjestelmän osien ja ohjelmistojen suorituskykymittauksista saadaan tietoa,jota voidaan käyttää suorituskyvyn parantamiseen ja laitteistohankintojen päätöksen tukena. Tässä työssä tutustutaan suorituskyvyn mittaamiseen ja mittausohjelmiin eli ns. benchmark-ohjelmistoihin. Työssä etsittiin ja arvioitiin eri tyyppisiä vapaasti saatavilla olevia benchmark-ohjelmia, jotka soveltuvat Linux-laskentaklusterin suorituskyvynanalysointiin. Benchmarkit ryhmiteltiin ja arvioitiin testaamalla niiden ominaisuuksia Linux-klusterissa. Työssä käsitellään myös mittausten tekemisen ja rinnakkaislaskennan haasteita. Benchmarkkeja löytyi moneen tarkoitukseen ja ne osoittautuivat laadultaan ja laajuudeltaan vaihteleviksi. Niitä on myös koottu ohjelmistopaketeiksi, jotta laitteiston suorituskyvystä saisi laajemman kuvan kuin mitä yhdellä ohjelmalla on mahdollista saada. Olennaista on ymmärtää nopeus, jolla dataa saadaan siirretyä prosessorille keskusmuistista, levyjärjestelmistä ja toisista laskentasolmuista. Tyypillinen benchmark-ohjelma sisältää paljon laskentaa tarvitsevan matemaattisen algoritmin, jota käytetään tieteellisissä ohjelmistoissa. Benchmarkista riippuen tulosten ymmärtäminen ja hyödyntäminen voi olla haasteellista.

Competitive Analysis of the Northwest Russian Transport Logistics Cluster – Finnish Perspective

Tutkimus tarkastelee Luoteis-Venäjän liikennelogistiikkaklusteria. Tarkoitus on selvittää klusterin nykyinen rakenne ja kilpailukyky sekä klusterin tarjoamat liiketoimintamahdollisuudet suomalaisille logistiikkayrityksille. Työssä käsitellään neljää perusliikennemuotoa: rautatie-, maantie-, meri- ja sisävesi-, sekä ilmaliikennettä. Tutkimuksen aineisto on kerätty tutkimusta varten laadituista kyselyistä, haastatteluista sekä aiemmin julkaistusta materiaalista. Venäjä on suunnitellut kehittävänsä voimakkaasti liikenneinfrastruktuuria, mm. julkaisemalla protektionistisen liikennestrategiasuunnitelman. Ongelmana ovat olleet toteutukset, jotka ovat jääneet yleensä puutteellisiksi. Tällä hetkellä todellista kilpailukykyä löytyy ainoastaan rautatieliikenteestä, muut kolme liikennemuotoa omaavat potentiaalisen kilpailukyvyn. Venäjällä on mahdollisuus hyötyä laajasta pinta-alastaan Aasian ja Euroopan liikenteen yhdistäjänä. Yksi konkreettisimmista esimerkeistä on Trans Siperian rautatie, joka kaipaisi vielä lisäkehitystä. Suomi on toiminut Venäjän liikenteessä arvotavaran kauttakulkumaana, vuonna 2003 noin 30–40 % Venäjän tuonnin arvosta kulki Suomen kautta. Venäjälle tullaan tuomaan arvotavaraa vielä useita vuosia, mutta reittien osalta kilpailu on tiukentunut. Suomalaisten yritysten liiketoimintamahdollisuuksiin esitetään kaksi mallia: kauttakulkuliikenteen lisäarvologistiset (VAL) operaatiot Suomessa tai etabloituminen Venäjän logistisiin ketjuihin. Suomalaisten olisi syytä parantaa yhteistyötään yritysten ja yliopistojen ym. koulutuslaitosten välillä. Myös yhteistyökumppaneiden hakeminen esimerkiksi Ruotsista voisi tuoda merkittäviä etuja. Suomalaista osaamista voitaisiin hyödyntää parhaiten etabloitumalla Venäjän markkinoille, esimerkiksi keskittymällä Venäjän logististen ketjujen johtamiseen. Myös VAL palveluiden johtamiseen Venäjällä olisi erittäin hyvä tilaisuus, koska Venäjän oma tietotaito logistiikassa ei ole vielä kehittynyt kansainväliselle tasolle, mutta kustannustaso on alhaisempi kuin Suomessa.

Development a distributed simulation environment on a cluster of workstations

Simulation has traditionally been used for analyzing the behavior of complex real world problems. Even though only some features of the problems are considered, simulation time tends to become quite high even for common simulation problems. Parallel and distributed simulation is a viable technique for accelerating the simulations. The success of parallel simulation depends heavily on the combination of the simulation application, algorithm and message population in the simulation is sufficient, no additional delay is caused by this environment. In this thesis a conservative, parallel simulation algorithm is applied to the simulation of a cellular network application in a distributed workstation environment. This thesis presents a distributed simulation environment, Diworse, which is based on the use of networked workstations. The distributed environment is considered especially hard for conservative simulation algorithms due to the high cost of communication. In this thesis, however, the distributed environment is shown to be a viable alternative if the amount of communication is kept reasonable. Novel ideas of multiple message simulation and channel reduction enable efficient use of this environment for the simulation of a cellular network application. The distribution of the simulation is based on a modification of the well known Chandy-Misra deadlock avoidance algorithm with null messages. The basic Chandy Misra algorithm is modified by using the null message cancellation and multiple message simulation techniques. The modifications reduce the amount of null messages and the time required for their execution, thus reducing the simulation time required. The null message cancellation technique reduces the processing time of null messages as the arriving null message cancels other non processed null messages. The multiple message simulation forms groups of messages as it simulates several messages before it releases the new created messages. If the message population in the simulation is suffiecient, no additional delay is caused by this operation A new technique for considering the simulation application is also presented. The performance is improved by establishing a neighborhood for the simulation elements. The neighborhood concept is based on a channel reduction technique, where the properties of the application exclusively determine which connections are necessary when a certain accuracy for simulation results is required. Distributed simulation is also analyzed in order to find out the effect of the different elements in the implemented simulation environment. This analysis is performed by using critical path analysis. Critical path analysis allows determination of a lower bound for the simulation time. In this thesis critical times are computed for sequential and parallel traces. The analysis based on sequential traces reveals the parallel properties of the application whereas the analysis based on parallel traces reveals the properties of the environment and the distribution.

On the effects of welding parameters on weld quality of plasma arc keyhole welding of structural steels

The possibility and the usefulness of applying plasma keyhole welding to structural steels with different compositions and material thicknesses, and in various welding positions has been examinated. Single pass butt welding with I groove in flat, horizontal vertical and vertical positions and root welding with V , Y and U grooves of thick plate material in flat position have been studied and the welds with high quality has been obtained. The technological conditions for successful welding are presented. The single and interactive effects of welding parameters on weld quality, especially on surface weld defects, geometrical form errors, internal defects and mechanical properties (strength, ductility, impact toughness, hardness and bendability) of weld joint, are presented. Welding parameter combinations providing the best quality welds are also presented.

The effects of real time control of welding parameters on weld quality in plasma arc keyhole welding

Joints intended for welding frequently show variations in geometry and position, for which it is unfortunately not possible to apply a single set of operating parameters to ensure constant quality. The cause of this difficulty lies in a number of factors, including inaccurate joint preparation and joint fit up, tack welds, as well as thermal distortion of the workpiece. In plasma arc keyhole welding of butt joints, deviations in the gap width may cause weld defects such as an incomplete weld bead, excessive penetration and burn through. Manual adjustment of welding parameters to compensate for variations in the gap width is very difficult, and unsatisfactory weld quality is often obtained. In this study a control system for plasma arc keyhole welding has been developed and used to study the effects of the real time control of welding parameters on gap tolerance during welding of austenitic stainless steel AISI 304L. The welding tests demonstrated the beneficial effect of real time control on weld quality. Compared with welding using constant parameters, the maximum tolerable gap width with an acceptable weld quality was 47% higher when using the real time controlled parameters for a plate thickness of 5 mm. In addition, burn through occurred with significantly larger gap widths when parameters were controlled in real time. Increased gap tolerance enables joints to be prepared and fit up less accurately, saving time and preparation costs for welding. In addition to the control system, a novel technique for back face monitoring is described in this study. The test results showed that the technique could be successfully applied for penetration monitoring when welding non magnetic materials. The results also imply that it is possible to measure the dimensions of the plasma efflux or weld root, and use this information in a feedback control system and, thus, maintain the required weld quality.

Influence of plasma modification on surface properties and offset printability of coated paper

The properties of the paper surface play a crucial role in ensuring suitable quality and runnability in various converting and finishing operations, such as printing. Plasma surface modification makes it possible to modify the surface chemistry of paper without altering the bulk material properties. This also makes it possible to investigate the role of the surface chemistry alone on printability without influencing the porous structure of the pigment-coated paper. Since the porous structure of a pigment coating controls both ink setting and optical properties, surface chemical changes created by a plasma modification have a potential to decouple these two effects and to permit a better optimization of them both. The aim of this work was to understand the effects of plasma surface modification on paper properties, and how it influences printability in the sheet-fed offset process. The objective was to broaden the fundamental understanding of the role of surface chemistry on offset printing. The effects of changing the hydrophilicity/ hydrophobicity and the surface chemical composition by plasma activation and plasma coatings on the properties of coated paper and on ink-paper interactions as well as on sheet-fed offset print quality were investigated. In addition, the durability of the plasma surface modification was studied. Nowadays, a typical sheet-fed offset press also contains units for surface finishing, for example UVvarnishing. The role of the surface chemistry on the UV-varnish absorption into highly permeable and porous pigment-coated paper was also investigated. With plasma activation it was possible to increase the surface energy and hydrophilicity of paper. Both polar and dispersion interactions were found to increase, although the change was greater in the polar interactions due to induced oxygen molecular groups. The results indicated that plasma activation takes place particularly in high molecular weight components such as the dispersion chemicals used to stabilize the pigment and latex particles. Surface composition, such as pigment and binder type, was found to influence the response to the plasma activation. The general trend was that pilot-scale treatment modified the surface chemistry without altering the physical coating structure, whereas excessive laboratory-scale treatment increased the surface roughness and reduced the surface strength, which led to micro-picking in printing. It was shown that pilot-scale plasma activation in combination with appropriate ink oils makes it possible to adjust the ink-setting rate. The ink-setting rate decreased with linseed-oil-based inks, probably due to increased acid-base interactions between the polar groups in the oil and the plasma-treated paper surface. With mineral-oil-based inks, the ink setting accelerated due to plasma activation. Hydrophobic plasma coatings were able to reduce or even prevent the absorption of dampening water into pigmentcoated paper, even when the dampening water was applied under the influence of nip pressure. A uniform hydrophobic plasma coating with sufficient chemical affinity with ink gave an improved print quality in terms of higher print density and lower print mottle. It was also shown that a fluorocarbon plasma coating reduced the free wetting of the UV-varnish into the highly permeable and porous pigment coating. However, when the UV-varnish was applied under the influence of nip pressure, which leads to forced wetting, the role of the surface chemical composition seems to be much less. A decay in surface energy and wettability occurred during the first weeks of storage after plasma activation, after which it leveled off. However, the oxygen/carbon elemental ratio did not decrease as a function of time, indicating that ageing could be caused by a re-orientation of polar groups or by a contamination of the surface. The plasma coatings appeared to be more stable when the hydrophobicity was higher, probably due to fewer interactions with oxygen and water vapor in the air.

Cluster structure of atomic nuclei

Kirjallisuusarvostelu

Activation of supply relationships : a study of main providers in the Turku logistics cluster

Företag inom industri och handel väljer allt oftare att låta ett logistikföretag sköta stora delar av sina logistiska processer. Logistikföretagen i sin tur överlåter utförandet av enskilda tjänster, som t.ex. olika typer av transport, till olika samarbetspartners inom branschen. I avhandlingen studeras hur logistikföretag går till väga då de väljer vilka av deras samarbetspartners som ska engageras för att delta i utförandet av ett logistiktjänstepaket, en arbetsprocess som här kallas aktivering. Fokus ligger på aktiveringens innehåll och de faktorer som inverkar på hur den går till och vilka samarbetsparter som kommer att engageras. Arbetet bygger på nätverksansatsen för studier av företagsrelationer på industriella marknader. Aktiveringsprocessen uppfattas som en rätt ordinär, rutinmässig verksamhet i företaget, men den kan också förväntas inverka på hur företagets samarbetsnätverk utvecklas över tiden, genom att vissa relationer förstärks medan andra försvagas. I den empi riska undersökningen deltog 29 logistikföretag i Åboregionen som utgående från ett diskussionsunderlag fick berätta om hur de går till väga vid aktivering.