Lähtölogistiikanstrateginen tarkastelu Imatran terästehtaalla

Tämän diplomityön aiheena on lähtölogistiikan strateginen tarkastelu tutkimuksen kohdeyrityksenä olevassa terästehtaassa. Tavoitteena oli lähtölogistiikan tulevaisuusskenaarioiden laatiminen. Diplomityössä tarkastellaan mm. logistiikan epävarmuustekijöitä ja haasteita, erilaisten kuljetusmuotojen käyttöä sekä kohdeyrityksen materiaalivirtojen suuntautumista tulevaisuudessa. Työssä luodaan katsaus logistisen asiakaspalvelun elementteihin ja tutkitaan, mitä elementtejä asiakkaat pitävät tärkeinä. Lisäksi tarkastellaan, miten asiakkaiden vaatimukset kehittyvät tulevaisuudessa. Tutkimus toteutettiin laadullisena tapaustutkimuksena. Empiirinen aineisto kerättiin haastattelujen, sähköpostikyselyn sekä havainnoinnin avulla. Diplomityössä laadittujen skenaarioiden aiheiksi valikoituivat kuljettaminen, Venäjä sekä tuotteet, volyymi ja markkina-alueet. Positiivisen skenaarion mukaan kasvavat materiaalivirrat suuntautuvat Suomen lisäksi Ruotsiin, Keski-Eurooppaan sekä Itä-Eurooppaan, joka on noussut uudeksi markkina-alueeksi. Negatiivisessa skenaariossa kilpailu on kiristynyt ja Ovako Imatran asiakkaat ovat muuttaneet joukolla Aasiaan, jonne teräksen vieminen Suomesta ei olekannattavaa. Tutkimus osoitti, että trendi tilauserien pienentymisestä ja toimitussyklin tihentymisestä pätee myös Ovako Imatran asiakkaiden kohdalla. Erityisen tärkeiksi logistisen asiakaspalvelun elementeiksi nousivat toimitusvarmuus sekä joustavuus toimituksissa. Tutkimuksessa havaittiin, että asiakkaat haluaisivat saada informaatiota tuotteen toimitustilasta online-järjestelmän kautta.

Uudet DCHP-prosessit

Diplomityön tavoitteena on selvittää viiden uuden yhdistetyn sähkön- ja lämmöntuotantoprosessin taloudellisuus Suomessa ja Keski-Euroopassa. Polttoaineena käytetään maakaasua. Tehoalue on 1 kW – 1 MW. Työn alkuosassa on kerrottu kyseisten prosessien tekniset ominaisuudet ja käyttö tällä hetkellä. Työn loppuosassa on laskettu jokaisen prosessin taloudellisuus viidessä eri maassa (Suomessa, Alankomaassa, Belgiassa, Iso-Britanniassa ja Saksassa) viidessä eri skenaariossa (omakotitalot, rivitalot, kerrostalot, pienteollisuus ja keskisuuri teollisuus). Toisena aihepiirinä diplomityössä on verrattu kompressori- ja absorptiojäähdyttimiä keskenään ja kerrottu kaukokylmän tekemisestä. Työn tuloksena saatiin arvio siitä, miten taloudellisesti kannattavia kyseiset prosessit ovat tällä hetkellä verrattuna perinteisiin sähkön- ja lämmöntuotantotapoihin.

SAHAUSTEKNOLOGIA TEOLLISILLA SAHALAITOKSILLA NYT JA TULEVAISUUDESSA

Diplomityössä on selvitetty teollisen sahaustekniikan nykytilaa ja sahausprosessissa käytettävien sahakoneiden teknistä kehitystä Pohjois- ja Keski-Euroopassa. Sahakonevalmistajia on tutkittu niiden tuottamien laitteiden kautta sekä yleisen saatavilla olevan taloudellisen ja tieteellisten tutkimusten tarjoaman informaation avulla. Tutkimuksessa mukana oleviin sahakoneisiin tutustuminen suoritettiin sahalaitosvierailuilla suomalaisilla sahalaitoksilla kevään 2002 aikana. Tieteellisten julkaisujen tietoja verrattiin samalla vallitsevaan tilanteeseen sahoilla. Samalla tehtyjen haastatteluiden avulla selvitettiin sahakoneisiin liittyvien investointien vaikuttimia. Haastatteluiden kohteena olivat sahateollisuuden tuotannosta ja teknisestä suunnittelusta sekä johtamisesta vastaavia henkilöitä erikokoisista sahateollisuusyrityksistä. Myös muutamat sahakonevalmistajien edustajat antoivat haastattelun omia laitteitaan koskien. Sahaustuotannon raaka-ainetilannetta tutkittiin tutkimusalueella maakohtaisesti. Sahaustekniikkana nelisahaus on vallitseva työstömuoto. Siinä käytettävät sahakoneet ovat pelkkahakkuri, joka hakettaa tukin sivut sivutuotehakkeeksi, profilointiyksiköt, jotka työstävät tukin tai pelkan pintaan sivutavarakappaleiden leveyden ennen tai jälkeen pyörösahayksiköitä, jotka erottavat sahatavarakappaleet toisistaan. Merkittävimmät oheislaitteet ovat tukin ja pelkan mittauslaitteet sekä tukinsyöttölaitteet, joiden perusteella puun käytön optimointi sahausprosessissa ja suuntaus sahakoneisiin tapahtuu. Mittatarkimmat ja tuotantonopeudeltaan nopeimmat pyörösahayksiköt ovat kaksiakselisia, profiloivia sahakoneita. Näillä ominaisuuksilla on suurin painoarvo myös sahojen investointisuunnittelussa nopean käyntiinajon lisäksi. Sahakoneiden kehitykseen vaikuttavia seikkoja ovat tulevaisuudessa tukkien koon pieneneminen istutusmetsien jalostuksen lisääntyessä ja suurten aarniometsien vähetessä. Terätekniikan kehitys on tuottaa edelleen ohuempia teriä teräohjaimin, luomalla teriin sisäisiä jännityksiä tai kehittämällä uusia terägeometrioita.

Animals in an Urban Context. A Zooarchaeological study of the Medieval and Post-Medieval town of Turku

The aim of this study is to explore the role and importance of different animal species in Turku through an analysis of osteological data and documentary evidence. The osteological material used in this study is derived from two town plots in Turku dating from the 13th century to the 19th century. The osteological material deposited in Turku represents animals bred both in the town and in the surrounding landscape. Animal husbandry in SW-Finland can also be examined through a number of historical documents. The importance of animals in Turku and its hinterland are closely connected and therefore the roles of the animals in both urban and rural settings are examined. The study has revealed the complexity of the depositional patterns in medieval and post-medieval Turku. In the different areas of Turku, characteristic patterns in the osteological material and different deposit types were evident. These patterns are reflections of the activities and therefore of the lifestyles practiced in Turku. The results emphasise the importance of context- awareness in the study of material culture from archaeological sites. Both the zooarchaeological and historical sources indicate that cattle were important in animal husbandry in Turku from the Middle Ages up to the 19th century. Sheep were the second most common species. When taking into consideration the larger size of cattle, the dominance of these animals when it come to meat consumption seems clear even in those phases where sheep bones are more abundant. Pig is less abundant in the material than either cattle or sheep and their importance for subsistence was probably fairly modest, albeit constant. Goats were not abundant in the material. Most of the identified goat bones came from low utility body parts (e.g. skulls and lower extremities), but some amount of goat meat was also consumed. Wild species were of minor importance when it came to consumption practices in Turku. The changes in Turku’s animal husbandry patterns between the medieval and post medieval periods is reflected in the change in age of the animals slaughtered, which was part of a wider pattern seen in North- and Central Europe. More mature animals are also present in the assemblages. This pattern is related to the more pronounced importance of cattle as a manure producer and a draught animal as a result of the intensification of crop cultivation. This change seems to occur later in Finland than in the more Southerly regions, and indeed it did not necessarily take hold in all parts of the country.

Quality potential of DIP and hardwood CTMP based raw materials in woodcontaining printing paper

The objective of the thesis was to define the quality potential of DIP and hardwood CTMP based raw material furnish for a printing paper production and to define the end product's pulp-based boundary conditions especially when thinking of Chinese markets. Although the Chinese paper industry expands rapidly, the production of some paper grades is still exiguous. Especially the softwood resources are limited in Asia, thus the purpose of the thesis was to find out the possibilities to produce printing paper in China from local raw materials. Bleached CTMP can be produced, for example, from fast-growing hardwood species like eucalyptus and poplar. Therefore in this thesis it was examined if good quality printing paper is possible to produce by using deinked pulp and hardwood CTMP based furnish. In the first section of experimental part, various deinked pulps and chemithermomechanical pulps were compared. The deinked pulps were from China, Central Europe and Finland. Central European was made for magazine papers, and the Chinese as well as the Finnish pulps were made for newsprints. Two of the BCTMPs were from China and those both were made from poplar, whereas one BCTMP was made from eucalyptus in a pilot plant. There were significant differences especially between BCTMPs and their paper properties. In the second section of experimental part, the deinked pulp and eucalyptus BCTMP were blended to produce handsheets. The results show that producing the highest quality printing paper would be difficult from these raw materials. Deinked pulp affected especially the strength and optical properties as well as calender blackening. The BCTMP was found to have effects mostly on the smoothness, strength and optical properties as well as calender blackening.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.

Tasehallinnan kehittäminen Suomen sähkömarkkinoilla

Tämän diplomityön tavoitteena oli tutkia tasehallinnan kehittämismahdollisuuksia Suomessa järjestelmävastaavan näkökulmasta. Sähköjärjestelmässä tulee vallita jatkuvasti tasapaino tuotannon ja kulutuksen välillä, tämän järjestelmävastaavan vastuulla olevan tasapainon ylläpitoa kutsutaan tehotasapainon hallinnaksi. Työssä pääasiasiallinen huomio oli markkinalähtöisessä tehotasapainon hallinnan kehittämisessä. Tuotantosuunnitelmat ovat ratkaisevassa osassa sähköjärjestelmän muutoksia ennustettaessa ja suunniteltaessa. Pääasiassa tutkimus kohdistuu tuotantosuunnitelmien tarkentamisen mahdollisuuksien analysointiin sekä tarkentamisesta aiheutuvien muutosten selvittämiseen. Työn yhteydessä toteutettiin sopivalla otannalla kyselytutkimus, jonka oli tarkoitus antaa tietoa Eurooppalaisista käytännöistä asian suhteen. Tutkimusten pohjalta päädyttiin malliin, jossa tuotantosuunnitelmien jaksonpituutta lyhennettäisiin nykyisestä 60 minuutista 15 minuuttiin. 15 minuutin jaksonpituus ulottuisi koko tuotantotaseen käsittelyyn, mukaan lukien säätösähkömarkkinat ja muut tehokaupat.

Logistics of North-West Russia and Rail Baltica: Standpoints of Private Sector

The main aims of the present report are to describe the current state of railway transport in Russia, and to gather standpoints of Russian private transportation logistics sector towards the development of new railway connection called Rail Baltica Growth Corridor, connecting North-West Russia with Germany through the Baltic States and Poland. North-West Russia plays important role not only in Russian logistics, but also wider European markets as in container sea ports handling is approx. 2.5 mill. TEU p.a. and handling volume in all terminals is above 190 million tons p.a. The whole transportation logistics sector is shortly described as an operational environment for railways – this is done through technical and economic angles. Transportation development is always going in line with economics of the country, so the analysis on economical development is also presented. Logistics integration of the country is strongly influenced by its engagement in the international trade. Although, raw material handling at sea ports and container transports (imports) are blossoming, domestic transportation market is barely growing (in long-term perspective). Thus, recent entrance of Russia into World Trade Organization (WTO) is analyzed theme in this research, as the WTO is an important regulator of the foreign trade and enabler of volume growth in foreign trade related transportation logistics. However, WTO membership can influence negatively the development of Russia’s own industry and its volumes (these have been uncompetitive in global markets for decades). Data gathering in empirical part was accomplished by semi-structured case study interviews among North-West Russian logistics sector actors (private). These were conducted during years 2012-2013, and research compiles findings out of ten case company interviews. Although, there was no sea port involved in the study, most of the interviewed companies relied in European Logistics within significant parts in short sea shipping and truck combined transportation chains (in Russian part also using railways). As the results of the study, it could be concluded that Rail Baltica is seen as possible transport corridor in most of the interviewed companies, if there is enough cargo available. However, interviewees are a bit sceptical, because major and large-scale infrastructural improvements are needed. Delivery time, frequency and price level are three main factors influencing the attractiveness of Rail Baltica route. Price level is the most important feature, but if RB can offer other advantages such as higher frequency, shorter lead times or more developed set of value-added services, then some flexibility is possible for the price level. Environmental issues are not the main criteria of today, but are recognized and discussed among customers. Great uncertainty exists among respondents e.g. on forthcoming sulphur oxide ban on Baltic Sea shipping (whether or not it is going to be implemented in Russia). Rather surprisingly, transportation routes to Eastern Europe and Mediterranean area are having higher value and price space than those to Germany/Central Europe. Border crossing operations (traction monopoly at rails and customs), gauge widths as well as unclear decision-making processes (in Russia), are named as hindering factors. Performance standards for European connected logistics among Russian logistics sector representatives are less demanding as compared to neighbourhood countries belonging to EU.

Improving Cost-Efficiency and Reducing Environmental Impacts of Intermodal Transportation with Dry Port Concept – Major Rail Transport Corridor in Baltic Sea Region

Transportation plays a major role in the gross domestic product of various nations. There are, however, many obstacles hindering the transportation sector. Cost-efficiency along with proper delivery times, high frequency and reliability are not a straightforward task. Furthermore, environmental friendliness has increased the importance of the whole transportation sector. This development will change roles inside the transportation sector. Even now, but especially in the future, decisions regarding the transportation sector will be partly based on emission levels and other externalities originating from transportation in addition to pure transportation costs. There are different factors, which could have an impact on the transportation sector. IMO’s sulphur regulation is estimated to increase the costs of short sea shipping in the Baltic Sea. Price development of energy could change the roles of different transport modes. Higher awareness of the environmental impacts originating from transportation could also have an impact on the price level of more polluting transport modes. According to earlier research, increased inland transportation, modal shift and slowsteaming can be possible results of these changes in the transportation sector. Possible changes in the transportation sector and ways to settle potential obstacles are studied in this dissertation. Furthermore, means to improve cost-efficiency and to decrease environmental impacts originating from transportation are researched. Hypothetical Finnish dry port network and Rail Baltica transport corridor are studied in this dissertation. Benefits and disadvantages are studied with different methodologies. These include gravitational models, which were optimized with linear integer programming, discrete-event and system dynamics simulation, an interview study and a case study. Geographical focus is on the Baltic Sea Region, but the results can be adapted to other geographical locations with discretion. Results indicate that the dry port concept has benefits, but optimization regarding the location and the amount of dry ports plays an important role. In addition, the utilization of dry ports for freight transportation should be carefully operated, since only a certain amount of total freight volume can be cost-efficiently transported through dry ports. If dry ports are created and located without proper planning, they could actually increase transportation costs and delivery times of the whole transportation system. With an optimized dry port network, transportation costs can be lowered in Finland with three to five dry ports. Environmental impacts can be lowered with up to nine dry ports. If more dry ports are added to the system, the benefits become very minor, i.e. payback time of investments becomes extremely long. Furthermore, dry port network could support major transport corridors such as Rail Baltica. Based on an analysis of statistics and interview study, there could be enough freight volume available for Rail Baltica, especially, if North-West Russia is part of the Northern end of the corridor. Transit traffic to and from Russia (especially through the Baltic States) plays a large role. It could be possible to increase transit traffic through Finland by connecting the potential Finnish dry port network and the studied transport corridor. Additionally, sulphur emission regulation is assumed to increase the attractiveness of Rail Baltica in the year 2015. Part of the transit traffic could be rerouted along Rail Baltica instead of the Baltic Sea, since the price level of sea transport could increase due to the sulphur regulation. Both, the hypothetical Finnish dry port network and Rail Baltica transport corridor could benefit each other. The dry port network could gain more market share from Russia, but also from Central Europe, which is the other end of Rail Baltica. In addition, further Eastern countries could also be connected to achieve higher potential freight volume by rail.

Diffusion of Smart Meters in Central East Europe

The present study deals with innovation diffusion as the central component of innovation process and takes smart meters as a concrete example from the electric power industry. Smart meters are seen as key enablers of the industry-wide shift towards smart grids and are recognized by the European Union as means of reaching its environmental and energy goals. However, the spread of smart meters through the market, especially in Central East Europe (CEE), is not corresponding to the expectations and identified benefits. The current work synthesizes available data for the under-researched geographical region of CEE and clarifies the process of smart meter diffusion and drivers behind it. In addition to innovation theories the methods applied are rate of adoption and thematic analysis. The results prove the large gap between optimal and actual diffusion as well as the lagging position of CEE in comparison to the EU’s market leaders. The smart metering market is driven from bottom-up and the majority of CEE countries have already carried out or started the initial activities. Therefore, in coming years more intensive smart meters deployment will be seen.

Integrating open articles with open data in the life sciences with Europe PubMed Central.

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Hands-On: Interlinking Institutional Repositories and Europe PubMed Central

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Europe PubMed Central

Workshop presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

External Location Factors of Finnish Direct Investment in Central and Eastern European Transitional Economies

Tutkimuksen päätavoitteena oli selvittää suomalaisten suorien investointien maan valintaan vaikuttavia tekijöitä Itä- ja Keski-Euroopan kymmenessä siirtymätaloudessa. Empiirisessä osuudessa tarkasteltiin suomalaisten yritysten tärkeimpiä sijaintitekijöitä alueella ja yrityskohtaisten tekijöiden vaikutusta sijaintitekijöihin. Tutkimuksessa selvitettiin myös yritysten päämotiiveja investoida maihin. Laaditun investointikriteeristön mukaan maat pystyttiin laittamaan paremmuusjärjestykseen suomalaisen investoijan kannalta. Empiirisen osuuden aineisto kerättiin postikyselylomakkeella yrityksiltä, joilla on tai jotka ovat suunnittelemassa investointeja näihin maihin. Tutkimusote oli kvantitatiivinen. Tutkimustulokset osoittavat, että suomalaiset investoijat valitsevat Itä- ja Keski-Euroopan maan investointikohteeksi pääasiassa markkinapotentiaalin ja edullisten kustannusten perusteella. Myös infrastruktuuri vaikuttaa maan valintaan. Eri aloilla toimivien yritysten sijaintitekijöiden painotuksissa havaittiin eroja. Yrityksen koko ja päämotiivi vaikuttivat sijaintitekijöiden painotuksiin. Investointikriteereiden mukaan kaksi parasta investointimaata suomalaisille investoijille ovat Puola ja Viro. Vertailtaessa investointikriteereitä toteutuneisiin investointeihin voidaan todeta, että suomalaiset investoijat eivät ole hyödyntäneet investoinneilla saatavia etuja kaikissa kohdemaissa.