On-line –jatkojalostuksen integrointi mäntysahan tuotantoprosessiin

Diplomityön tavoitteena oli selvittää erilaisia jatkojalostusmahdollisuuksia, joilla voidaan nostaa suuren mäntysahan tuotteiston arvoa. Lisäksi tuli tarkastella jalostuksen integrointia sahan tuotantoprosessiin. Työn taustalla on toisaalta puutuotemarkkinoiden muuttuminen ja toisaalta raaka-aineen laadullinen huononeminen. Molemmat seikat vaikuttavat negatiivisesti perinteisen mäntysahan kannattavuuteen .Jatkojalostuksen integroinnilla sahatavaraprosessiin saavutetaan säästöjä tuotantokustannuksissa, kun tarkastellaan koko prosessia tukista jatkojalosteeksi. Myös raaka-aineen tuottavuutta voidaan nostaa integraation avulla. Jatkojalostus voidaan integroida sahatavaraprosessiin raaka-aineen valikoinnilla sahatavaraprosessin eri osissa, on-line –jalostuksella sekä taloudellisesti. Sahatavaraprosessissa tapahtuva raaka-aineen valikointi voidaan suorittaa tukeista ja sahatavarasta. Valikointikriteerinä voi olla puun ominaisuudet, sahatavaran mitat ja laatu. Valikointiin voidaan nykyteknologiasta hyödyntää röntgentekniikkaa sekä konenäköä. On-line –jalostus tarkoittaa kiinteästi sahatavaraprosessiin liittyvää jalostusta, jolloin ns. turhia prosessivaiheita jää pois ja syntyy säästöjä. On-line –jalostuksen edellytys on raaka-aineen jonkin asteinen valikointi, esim. pituus. Taloudellisesti integroitu jalostus tarkoittaa, että jalostuslaitoksella pyritään nollatulokseen ja jalostuksen lisäarvo palautetaan sahan toimittamaan raaka-aineen hintaan. Tällainen toiminta yhtiön sisällä poistaa turhaa keskustelua raaka-aineen siirtohinnoista ja siten vapauttaa osaltaan resursseja tuottavampaan toimintaan. Erilaisten jatkojalostusmuotojen ja puun ominaisuuksien hyödyntämisen seulonnan perusteella löytyi yksi jalostusmuoto, jolla voidaan kohottaa mäntysahan tuotteiston arvoa. Työn tuloksena syntyi investointiehdotus aihiotankotuotannosta ikkunateollisuuden tarpeisiin. Raaka-aineen hyödynnettäviä ominaisuuksia ovat männyn sydänpuun luonnollinen kestävyys sekä keskimääräinen oksaväli. Valikointi tehdään välitukeista, joiden sahaamisen kannattavuus on männyn rungon osista heikoin. Aihiotankoprosessissa hyödynnetään konenäköä ja sormijatkostekniikkaa. Jatkojalostuksen integrointi sahatavaraprosessiin toteutetaan rakentamalla on-line –jalostuslaitos sekä soveltamalla röntgentekniikkaa raaka-aineen valinnassa.

Models for vertical wood density of Scots pine, Norway spruce and birch stems, and their application to determine average wood density

Abstract

Distance Transforms on Gray-Level Surfaces

This thesis studies gray-level distance transforms, particularly the Distance Transform on Curved Space (DTOCS). The transform is produced by calculating distances on a gray-level surface. The DTOCS is improved by definingmore accurate local distances, and developing a faster transformation algorithm. The Optimal DTOCS enhances the locally Euclidean Weighted DTOCS (WDTOCS) with local distance coefficients, which minimize the maximum error from the Euclideandistance in the image plane, and produce more accurate global distance values.Convergence properties of the traditional mask operation, or sequential localtransformation, and the ordered propagation approach are analyzed, and compared to the new efficient priority pixel queue algorithm. The Route DTOCS algorithmdeveloped in this work can be used to find and visualize shortest routes between two points, or two point sets, along a varying height surface. In a digital image, there can be several paths sharing the same minimal length, and the Route DTOCS visualizes them all. A single optimal path can be extracted from the route set using a simple backtracking algorithm. A new extension of the priority pixel queue algorithm produces the nearest neighbor transform, or Voronoi or Dirichlet tessellation, simultaneously with the distance map. The transformation divides the image into regions so that each pixel belongs to the region surrounding the reference point, which is nearest according to the distance definition used. Applications and application ideas for the DTOCS and its extensions are presented, including obstacle avoidance, image compression and surface roughness evaluation.

Kestävän kehityksen näkökulmien huomioiminen kunnan energiaratkaisussa

Diplomityön tavoitteena on tuottaa informaatiota kunnalliseen päätöksentekoon, jonka avulla kestävän kehityksen näkökulmia voidaan huomioida kunnan energiaratkaisusta päätettäessä. Yhtenä työn lähtökohtana on ollut myös uusi EU-direktiivi, jonka mukaan ympäristönäkökohtia voidaan huomioida julkisten hankintojen tarjouspyyntömenettelyssä valintaperusteena. Tarkastelun kohteena oli kokoluokaltaan 0,5–3 MW:n aluelämpölaitokset sekä polttoaineiden tuotantoketjut. Työssä vertailtavat polttoaineet olivat metsähake, raskas polttoöljy, kevyt polttoöljy ja turve. Diplomityössä on perehdytty kestävän kehityksen käsitteeseen ja muodostettu sen mukaan ekologiselle, sosiaaliselle ja taloudelliselle näkökulmalle kunnallisen energiaratkaisun indikaattoreita. Empiirisessä osassa käsitellään kestävän kehityksen näkökulmien muodostumista Enon energiaosuuskunnan toimintaan perustuen. Käytettävät kestävän kehityksen näkökulmien mukaiset indikaattorit ovat polttoaineen tuotannosta ja käytöstä aiheutuvat kasvihuonekaasupäästöt, polttoaineen tuotannon työllisyysvaikutukset sekä energian hinnan muodostuminen osuuskunnan asiakkaille. Tässä diplomityössä tarkastelluilla kestävän kehityksen indikaattoreilla mitattuna, metsähakkeen käytöllä energiantuotannossa on positiivinen vaikutus niin kunnan kasvihuonekaasutaseessa, työllisyystilanteessa sekä myös enemmän kuluttajaystävällinen asema, lämmön hinnan vakauden ansiosta, kuin muilla työssä käsiteltävillä polttoaineilla. Polttoaineen tuotantoketjun osalta metsähakkeelle saatiin tuotannon ja käytön aiheuttamaksi kasvihuonekaasupäästöksi 2,9–4,2 g CO2-ekv/MJ. Tulos perustuu Enon energiaosuuskunnan polttoaineen hankinnassa käytössä oleviin keskimääräisiin etäisyyksiin metsäkuljetuksessa (250 m) ja kaukokuljetuksessa (15 km). Tuotannon ja käytön aiheuttamat kasvihuonekaasupäästöt olivat raskaalla polttoöljyllä 88,2 g CO2-ekv/MJ, kevyellä polttoöljyllä 85,0 g CO2-ekv/MJ ja turpeella 104,0–108,1 g CO2-ekv/MJ. Metsähakkeen osalta polttoaineen tuotannon osuus koko tarkastellun energiaketjun kasvihuonekaasupäästöistä oli noin 43–57 %. Enon energiaosuuskunnan tapauksessa vuoden 2005 odotetulla toiminta-asteella metsähakkeella tuotetun lämmön tuotantoketjun kasvihuonekaasupäästöt ovat noin 160 t CO2-ekv. Kevyellä polttoöljyllä tuotetun lämmön tuotantoketjun kasvihuonekaasupäästöt olisivat noin 3700 t CO2-ekv sekä turpeen (50 %) ja metsähakkeen (50 %) seoskäyttöön perustuvalla ketjulla noin 2300–2400 t CO2-ekv. Samaisella toiminta-asteella työllisyysvaikutukset ovat käytettäessä metsähaketta 2,2–8,6 htv, raakaöljyä 0,12 htv ja turvetta 1,4–1,6 htv. Metsähakkeen käyttö aluelämpölaitosten pääpolttoaineena takaa myös vakaan hintakehityksen osuuskunnan asiakkaille.

Optimised Utilization of Bioenergy in Poland

The aim of the study was to ford out the availability of biomasses, which are available for energy production, in Poland. Biomasses which were examined were forest residues and surplus straw. Availability was examined by 16 Polish voivodeships, which are provinces in Poland. After fording out the amounts of biomasses for energy production was examined the need of biomass in the biggest CHP plants in Poland. It was expected that all the plants uses 15 % of biomass as the fuel. In the first parts of the report are explained the legislation which effects to biomass use in energy production in EU level and in Polish level. Also the combustion methods best for biomasses are explained by examples. After this, is studied the general situation of renewable energy use in Poland and the facts about the country. In the last parts it's explained the calculations and is shown the example cases. When it was found out the needs and supply of biomass it was examined by examples how it could be transported to the plants from the producers. Also was examined costs effected, if there were logistical terminals between the producer and the end user. The estimation was done by setting prices for the biomass, and fording out average costs for producing and transporting biomass. There are a lot of surplus biomasses in Poland which could be used for energy production, and this is a one way to reach the goals that EU has set of renewable energies. But because biomasses doesn't have such a good calorific value, it isn't worth able to transport it very long distances. In the research was set the prices for producer 9€/MWh and for end user 15€/MWh, the maximum transportation distance for forest residues was 52 km and for straw 56 km. These are example estimations and it has to be remembered that there are a lot of factors that makes inaccurate. The model is really sensitive and by changing one parameter the results change a lot.

New Distance Transforms for Gray Level Image Compression

This thesis deals with distance transforms which are a fundamental issue in image processing and computer vision. In this thesis, two new distance transforms for gray level images are presented. As a new application for distance transforms, they are applied to gray level image compression. The new distance transforms are both new extensions of the well known distance transform algorithm developed by Rosenfeld, Pfaltz and Lay. With some modification their algorithm which calculates a distance transform on binary images with a chosen kernel has been made to calculate a chessboard like distance transform with integer numbers (DTOCS) and a real value distance transform (EDTOCS) on gray level images. Both distance transforms, the DTOCS and EDTOCS, require only two passes over the graylevel image and are extremely simple to implement. Only two image buffers are needed: The original gray level image and the binary image which defines the region(s) of calculation. No other image buffers are needed even if more than one iteration round is performed. For large neighborhoods and complicated images the two pass distance algorithm has to be applied to the image more than once, typically 3 10 times. Different types of kernels can be adopted. It is important to notice that no other existing transform calculates the same kind of distance map as the DTOCS. All the other gray weighted distance function, GRAYMAT etc. algorithms find the minimum path joining two points by the smallest sum of gray levels or weighting the distance values directly by the gray levels in some manner. The DTOCS does not weight them that way. The DTOCS gives a weighted version of the chessboard distance map. The weights are not constant, but gray value differences of the original image. The difference between the DTOCS map and other distance transforms for gray level images is shown. The difference between the DTOCS and EDTOCS is that the EDTOCS calculates these gray level differences in a different way. It propagates local Euclidean distances inside a kernel. Analytical derivations of some results concerning the DTOCS and the EDTOCS are presented. Commonly distance transforms are used for feature extraction in pattern recognition and learning. Their use in image compression is very rare. This thesis introduces a new application area for distance transforms. Three new image compression algorithms based on the DTOCS and one based on the EDTOCS are presented. Control points, i.e. points that are considered fundamental for the reconstruction of the image, are selected from the gray level image using the DTOCS and the EDTOCS. The first group of methods select the maximas of the distance image to new control points and the second group of methods compare the DTOCS distance to binary image chessboard distance. The effect of applying threshold masks of different sizes along the threshold boundaries is studied. The time complexity of the compression algorithms is analyzed both analytically and experimentally. It is shown that the time complexity of the algorithms is independent of the number of control points, i.e. the compression ratio. Also a new morphological image decompression scheme is presented, the 8 kernels' method. Several decompressed images are presented. The best results are obtained using the Delaunay triangulation. The obtained image quality equals that of the DCT images with a 4 x 4

Future prospects of short distance rail based passenger transport in Northern Europe

The worlds’ population is increasing and cities have become more crowded with people and vehicles. Communities in the fringe of metropolitans’ increase the traffic done with private cars, but also increase the need for public transportation. People have typically needs traveling to work located in city centers during the morning time, and return to suburbs in the afternoon or evening. Rail based passenger transport is environmentally friendly transport mode with high capacity to transport large volume of people. Railways have been regulated markets with national incumbent having monopoly position. Opening the market for competition is believed to have a positive effect by increasing the efficiency of the industry. National passenger railway market is opened for competition only in few countries, where as international traffic in EU countries was deregulated in 2010. The objective of this study is to examine the passenger railway market of three North European countries, Sweden, Denmark and Estonia. The interest was also to get an understanding of the current situation and how the deregulation has proceeded. Theory of deregulation is unfolded with literature analyses and empirical part of the study is constructed from two parts. Customer satisfaction survey was chosen as a method to collect real life experiences from the passengers and measure their knowledge of the market situation and possible changes appeared. Interviews of experts from the industry and labor unions give more insights and able better understanding for example of social consequences caused from opening the market for competition. Expert interviews were conducted by using semi-structured theme interview. Based on the results of this study, deregulation has proceeded quite differently in the three countries researched. Sweden is the most advanced country, where the passenger railway market is open for new entrants. Denmark and Estonia are lagging behind. Opening the market is considered positive among passengers and most of the experts interviewed. Common for the interviews were the labour unions negative perspective concerning deregulation. Despite the fact deregulation is considered positive among the respondents of the customer satisfaction survey, they could not name railway undertakings operating in their country. Generally respondents were satisfied with the commuter trains. Ticket price, punctuality of trains and itinerary affect the most to customer satisfaction.

Performance characteristic of moving average trading rules in the Finnish stock market

The thesis examines the profitability of DMAC trading rules in the Finnish stock market over the 1996-2012 period. It contributes to the existing technical analysis literature by comparing for the first time the performance of DMAC strategies based on individual stock trading portfolios to the performance of index trading strategies based on the trading on the index (OMX Helsinki 25) that consists of the same stocks. Besides, the market frictions including transaction costs and taxes are taken into account, and the results are reported from both institutional and individual investor’s perspective. Performance characteristic of DMAC rules are evaluated by simulating 19,900 different trading strategies in total for two non- overlapping 8-year sub-periods, and decomposing the full-sample-period performance of DMAC trading strategies into distinct bullish- and bearish-period performances. The results show that the best DMAC rules have predictive power on future price trends, and these rules are able to outperform buy-and-hold strategy. Although the performance of the DMAC strategies is highly dependent on the combination of moving average lengths, the best DMAC rules of the first sub-period have also performed well during the latter sub-period in the case of individual stock trading strategies. According to the results, the outperformance of DMAC trading rules over buy-and-hold strategy is mostly attributed to their superiority during the bearish periods, and particularly, during stock market crashes.

Cultural distance and negotiation behavior : Perception of entrepreneurs operating in Turku

This thesis investigates the influence of cultural distance on entrepreneurs’ negotiation behaviour. For this purpose, Turku was chosen as the unit of analysis due to the exponential demographic change experienced during the last two decades that has derived in a more diversified local environment. The research aim set for this study was to identify to what extent entrepreneurs face cultural distance, how cultural distance influences the entrepreneur’s negotiation behaviour and how can it be addressed in order to turn dissimilarities into opportunities. This study presented the relation and apparent dichotomy of cultural distance and global culture, including the component of diversity. The impact of cultural distance in the entrepreneurial mindset and its consequent effect in negotiation behaviour was presented too. Addressing questions about the way individuals perceive, behave and interact allowed the use of interviews for this qualitative research study. In the empirical part of this study it was found that negotiation behaviour differed in terms of how congenial entrepreneurs felt when managing cultural distance, encompassing their performance. It was also acknowledged that after time and effort, some of the personal traits were enhanced while others reduced, allowing for more flexibility and adaptation. Furthermore, depending on the level of trust and shared interests, entrepreneurs determined their attitudinal approach, being adaptive or reactive subject to situational aspects. Additionally, it was found that the acquisition of cultural savvy not necessarily conveyed to more creativity. This experiential learning capability led to the proposition of new ways of behaviour. Likewise, it was proposed that growing cultural intelligence bridge distances, reducing mistrusts and misunderstandings. The capability of building more collaborative relationships allows entrepreneurs to see cultural distance as a cultural perspective instead of as a threat. Therefore it was recommended to focus on proximity rather than distance to better identify and exploit untapped opportunities and better perform when negotiating in whichever cultural conditions.

On Distributed Storage Codes

Distributed storage systems are studied. The interest in such system has become relatively wide due to the increasing amount of information needed to be stored in data centers or different kinds of cloud systems. There are many kinds of solutions for storing the information into distributed devices regarding the needs of the system designer. This thesis studies the questions of designing such storage systems and also fundamental limits of such systems. Namely, the subjects of interest of this thesis include heterogeneous distributed storage systems, distributed storage systems with the exact repair property, and locally repairable codes. For distributed storage systems with either functional or exact repair, capacity results are proved. In the case of locally repairable codes, the minimum distance is studied. Constructions for exact-repairing codes between minimum bandwidth regeneration (MBR) and minimum storage regeneration (MSR) points are given. These codes exceed the time-sharing line of the extremal points in many cases. Other properties of exact-regenerating codes are also studied. For the heterogeneous setup, the main result is that the capacity of such systems is always smaller than or equal to the capacity of a homogeneous system with symmetric repair with average node size and average repair bandwidth. A randomized construction for a locally repairable code with good minimum distance is given. It is shown that a random linear code of certain natural type has a good minimum distance with high probability. Other properties of locally repairable codes are also studied.

Benchmark of routing protocols regarding green considerations

In Mobile Ad-hoc Networks (MANET) the participating nodes have several roles such as sender, receiver and router. Hence there is a lot of energy consumed by the nodes for the normal working of the network since each node has many different roles. Also in MANET the nodes keep moving constantly and this in turn consumes a lot of energy. Since battery capacity of these nodes is limited it fails to fulfil the high demand of energy. The scarcity of energy makes the energy conservation in mobile ad-hoc networks an important concern. There is several research carried out on the energy consumption of mobile ad-hoc networks these days. Some of this research suggests sleep mode, transmission power control, load balancing etc. In this thesis, we are comparing various proposed energy efficient models for some of the ad-hoc protocols. We compare different energy efficient models for Optimised Linked State Algorithm (OLSR) and Ad-hoc On Demand Distance Vector (AODV). The routing protocols are compared for different parameters such as average remaining energy, number of nodes alive, payload data received and performance with different mobility speed. The simulation results helps in benchmarking the various energy efficient routing models for OLSR and AODV protocols. The benchmarking of the routing protocols can be based on many factors but this thesis concentrates on benchmarking the MANET routing protocols mainly based on the energy efficiency and increased network lifetime.