Statistical Inversion Theory in X-ray Tomography

In this thesis the X-ray tomography is discussed from the Bayesian statistical viewpoint. The unknown parameters are assumed random variables and as opposite to traditional methods the solution is obtained as a large sample of the distribution of all possible solutions. As an introduction to tomography an inversion formula for Radon transform is presented on a plane. The vastly used filtered backprojection algorithm is derived. The traditional regularization methods are presented sufficiently to ground the Bayesian approach. The measurements are foton counts at the detector pixels. Thus the assumption of a Poisson distributed measurement error is justified. Often the error is assumed Gaussian, altough the electronic noise caused by the measurement device can change the error structure. The assumption of Gaussian measurement error is discussed. In the thesis the use of different prior distributions in X-ray tomography is discussed. Especially in severely ill-posed problems the use of a suitable prior is the main part of the whole solution process. In the empirical part the presented prior distributions are tested using simulated measurements. The effect of different prior distributions produce are shown in the empirical part of the thesis. The use of prior is shown obligatory in case of severely ill-posed problem.

Hybrid LC Filter for Power Electronic Drives: Theory and Implementation

Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns (“intra capacitance”) of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be iron or even air as in the filter considered in this work. One of the foils, called the main foil, can be placed between the inverter and the motor cable. Other ones, called auxiliary foils, may be connected in star to create differential-mode noise paths, and then coupled to the DC link midpoint to guarantee a traveling path, especially for the common-mode currents. This way, there is a remarkable capacitance between the main foil and the auxiliary foil. Investigations showed that such a system can be described by a simple equivalent LC filter in a wide range of frequencies. Because of its simple hybrid construction, the proposed LC filter can be a cost-effective and competitive solution for modern power drives. In the thesis, the application field of the proposed filter is considered and determined. The basics of hybrid LC filter design are developed further. High-frequency behaviour of the proposed filter is analysed by simulations. Finally, the thesis presents experimental data proving that the hybrid LC filter can be used for du/dt of PWM pulses and reduction of common-mode currents.

Extreme Observables and Optimal Measurements in Quantum Theory

Optimization of quantum measurement processes has a pivotal role in carrying out better, more accurate or less disrupting, measurements and experiments on a quantum system. Especially, convex optimization, i.e., identifying the extreme points of the convex sets and subsets of quantum measuring devices plays an important part in quantum optimization since the typical figures of merit for measuring processes are affine functionals. In this thesis, we discuss results determining the extreme quantum devices and their relevance, e.g., in quantum-compatibility-related questions. Especially, we see that a compatible device pair where one device is extreme can be joined into a single apparatus essentially in a unique way. Moreover, we show that the question whether a pair of quantum observables can be measured jointly can often be formulated in a weaker form when some of the observables involved are extreme. Another major line of research treated in this thesis deals with convex analysis of special restricted quantum device sets, covariance structures or, in particular, generalized imprimitivity systems. Some results on the structure ofcovariant observables and instruments are listed as well as results identifying the extreme points of covariance structures in quantum theory. As a special case study, not published anywhere before, we study the structure of Euclidean-covariant localization observables for spin-0-particles. We also discuss the general form of Weyl-covariant phase-space instruments. Finally, certain optimality measures originating from convex geometry are introduced for quantum devices, namely, boundariness measuring how ‘close’ to the algebraic boundary of the device set a quantum apparatus is and the robustness of incompatibility quantifying the level of incompatibility for a quantum device pair by measuring the highest amount of noise the pair tolerates without becoming compatible. Boundariness is further associated to minimum-error discrimination of quantum devices, and robustness of incompatibility is shown to behave monotonically under certain compatibility-non-decreasing operations. Moreover, the value of robustness of incompatibility is given for a few special device pairs.

A conspectus on estimating function theory and its applicability to recurrent modeling issues in forest biometry

Summary

Kunnan ympäristönsuojelumääräykset case Kotka

Ympäristönsuojelulain (86/2000) 19 §:n nojalla kunnilla voi olla ympäristönsuojelumääräykset. Määräysten antaminen on kunnille vapaaehtoista. Määräysten tulee olla ympäristönsuojelulain täytäntöönpanon kannalta tarpeellisia, kunnan paikallisista olosuhteista johtuvia kuntaa tai sen osaa koskevia yleisiä määräyksiä. Määräykset antaa kunnanvaltuusto. Ympäristönsuojelumääräyksillä on muuta lainsäädäntöä täydentävä, ei korvaava asema. Tämän työn tavoitteena oli laatia Kotkan kaupungille ehdotus kunnan ympäristönsuojelumääräyksiksi. Työn teoriaosassaon selvitetty kunnan ympäristönsuojelumääräysten oikeudelliset lähtökohdat ja suhde muuhun lainsäädäntöön. Tulososassa on selvitetty mitä toimintoja Kotkassa tulisi säännellä kunnan ympäristönsuojelumääräyksin. Työn toimeksiantajan kannalta oleellisimmat tulokset on esitetty työn liiteosassa. Ehdotuksen määräykset koskevat jätevesien käsittelyä, lumenkaatopaikkojen aiheuttamia ympäristöhaittoja, pölyn torjuntaa, tilapäisen melun torjuntaa, öljysäiliöiden tarkastamista ja käytöstä poistamista sekä hevosten pidon ympäristövaikutuksia. Ympäristönsuojelumääräysten voimaantulon myötä osa ympäristönsuojeluviranomaisen antamista suosituksista saa sitovan vaikutuksen. Ympäristönsuojelumääräykset osaltaan selventävät ympäristönsuojeluviranomaisen mahdollisuuksia puuttua eri toimintojen ympäristövaikutuksiin ennakolta.

Consumers' use of nutrition-related endorsement symbol to help their purchase decisions: An extension of the theory of planned behaviour

Tutkimuksessa haluttiin selvittää, mitkä tekijät vaikuttavat ravintoon liittyvän suositusmerkin käyttöön kuluttajan ostopäätöksen apuna. Tutkimuksen viitekehyksen pohjaksi valittiin suunnitellun toiminnan teoria, joka on osoittautunut selittämään hyvin useaa ravintoon- ja terveyteen liittyvää käyttäytymistä. Tutkimustoteutettiin kyselytutkimuksella, jonka aineisto kerättiin Internetissä julkaistulla kyselylomakkeella. Tulokset osoittivat, että kuluttajan aikomus käyttää suositusmerkkiä oli mallin vahvin selittäjä. Lisäksi merkin käyttöä selitti kuluttajan kokema sisäinen kontrolli, johon ulkoinen kontrolli vahvasti vaikuttaa. Ostopäätössitoutumisen havaittiin vaikuttavan aikomuksen ja todellisen merkin käytön väliseen yhteyteen. Yleisesti tulokset osoittivat, että kuluttajilla on aikomusta käyttää merkkiä, mutta todellinen käyttö on huomattavasti vähäisempää.

Analyzing dynamic intellectual capital: System-based theory and application

This research report presents an application of systems theory to evaluating intellectual capital (IC) as organization's ability for self-renewal. As renewal ability is a dynamic capability of an organization as a whole, rather than a static asset or an atomistic competence of separate individuals within the organization, it needs to be understood systemically. Consequently, renewal ability has to be measured with systemic methods that are based on a thorough conceptual analysis of systemic characteristics of organizations. The aim of this report is to demonstrate the theory and analysis methodology for grasping companies' systemic efficiency and renewal ability. The volume is divided into three parts. The first deals with the theory of organizations as self-renewing systems. In the second part, the principles of quantitative analysis of organizations are laid down. Finally, the detailed mathematics of the renewal indices are presented. We also assert that the indices produced by the analysis are an effective tool for the management and valuation of knowledge-intensive companies.

Field Sales Management Control: Towards a Multi-Level Theory

The purpose of this dissertation is to increase the understanding and knowledge of field sales management control systems (i.e. sales managers monitoring, directing, evaluating and rewarding activities) and their potential consequences on salespeople. This topic is important because research conducted in the past has indicated that the choice of control system type can on the other hand have desirable consequences, such as high levels of motivation and performance, and on the other hand leadto harmful unintended consequences, such as opportunistic or unethical behaviors. Despite the fact that marketing and sales management control systems have been under rigorous research for over two decades, it still is at a very early stage of development, and several inconsistencies can be found in the research results. This dissertation argues that these inconsistencies are mainly derived from misspecification of the level of analysis in the past research. These different levels of analysis (i.e. strategic, tactical, and operational levels) involve very different decision-making situations regarding the control and motivation of sales force, which should be taken into consideration when conceptualizing the control. Moreover, the study of salesperson consequences of a field sales management control system is actually a cross-level phenomenon, which means that at least two levels of analysis are simultaneously involved. The results of this dissertation confirm the need to re-conceptualize the field sales management control system concept. It provides empirical evidence for the assertion that control should be conceptualized with more details atthe tactical/operational level of analysis than at the strategic levelof analysis. Moreover, the results show that some controls are more efficiently communicated to field salespeople than others. It is proposed that this difference is due to different purposes of control; some controls aredesigned for influencing salespersons' behavior (aim at motivating) whereas some controls are designed to aid decision-making (aim at providing information). According to the empirical results of this dissertation, the both types of controls have an impact to the sales force, but this impactis not as strong as expected. The results obtained in this dissertation shed some light to the nature of field sales management control systems, and their consequences on salespeopl