Yhdyskuntajätevesien yhteispuhdistus sellu- ja paperitehtaan aktiivilietelaitoksessa

Työn tavoitteena on ollutselvittää kustannukset, joita syntyy, jos Kuusankosken kaupungin puhdistamolta johdetaan jätevedet UPM-Kymmene Oyj:n Kymin aktiivilietelaitokselle puhdistettaviksi, ja kustannukset, joita aiheutuu kaupungin puhdistamon laajentamisesta typenpoistoon sopivaksi sekä verrata näiden hankkeiden kustannuksia. Työssä selvitetään myös muutokset, joita yhteispuhdistukseen siirtymisestä aiheutuu Kymin aktiivilietelaitokselle ja miten jätevesikuormitus Kymijokeen muuttuu. Lisäksi työssäon tarkasteltu yhdyskuntajätevedenpuhdistamoilta tuotujen lietteiden vaikutustaKymin aktiivilietelaitoksen toimintaan ja luotu katsaus käytössä olevien metsäteollisuusyritysten ja kaupunkien yhteispuhdistamojen toimintaan Raumalla ja Grand Rapids:ssa. Yhdyskuntajätevesien yhteispuhdistuksesta sellu- ja paperitehtaan aktiivilietelaitoksessa on saatu hyviä kokemuksia Raumalta. Kokonaistyppikuormitus Rauman merialueelle on puolittunut ja lisäksi fosfori- ja BOD-kuormitukset ovat vähentyneet. Ravinteiden tarve puhdistamolla on kuitenkin ennakoitua suurempija ravinteiden kulutusta voidaan selittää monella tekijällä mm. lämpötilan laskulla ja lietekuorman lisääntymisellä. Kymin puhdistamolle on tuotu Akanojan puhdistamon ylijäämäliete vuodesta 1996 lähtien. Vuoden 2004 marras- ja joulukuussa suoritetussa kokeilussa Kymin puhdistamolle tuotiin Akanojan lietteiden lisäksi osa Kouvolan puhdistamolla syntyneistä lietteistä. Kokeilun perusteella voidaan todeta, että yhdyskuntajätevesilietteiden tuonnilla voidaan korvata puhdistamolla tarvittavia ravinteita. Uusi jätteenpolttodirektiivi tuskin aiheuttanee ongelmia poltettaessa voimalaitoksella ylijäämälietettä, joka sisältää myös yhdyskuntajätevesistä peräisin olevaa lietettä. Kymin aktiivilietelaitoksen lämpötila tulee laskemaan yhteispuhdistukseen siirryttäessä viileiden yhdyskuntajätevesien vaikutuksesta. Yhteispuhdistustilanteessa Kuusankosken keskustan jokialueen bakteeritilanteeseen ei ole todennäköisesti tulossa muutosta, mutta virustilanteen muuttuminen voi olla mahdollista. Yhteispuhdistukseen siirryttäessä Kymin puhdistamon kapasiteettia tarvitsee kasvattaa ainoastaan jälkiselkeytyksen suhteen. Yhteispuhdistustilanteessa jätevesikuormitus Kymijokeen tulee pienenemään erityisesti typen osalta ja myös BOD- ja fosforikuormat pienenevät. COD-kuormitus pysyy lähes ennallaan ja kiintoainekuorma saattaa lisääntyä hiukan. Yhteispuhdistustilanteessa Kymijokeen aiheutuu jätevesikuormitusta myös ohituksista, kun yhdyskuntajätevesimäärä ylittää hetkellisesti esimerkiksi rankkasateen sattuessa mitoitusvirtaamansa arvon. Investointikustannukseksi, Kuusankosken kaupungin puhdistamon muuttamisesta typenpoistoon sopivaksi, arvioitiin mitoitusvirtaamasta riippuen 3 210 000 ¤ tai 2 460 000 ¤. Yhteispuhdistukseen siirtyminen aiheuttaa kaupungille n. 3 755 000 ¤ investointikustannuksen ja Kymin puhdistamolle n. 365 000 ¤. Investointikustannuksiltaan yhteispuhdistukseen siirtyminen tulee kaupungille kalliimmaksi mutta pitkällä aikavälillä tarkasteltuna edullisempi vaihtoehto Kuusankosken kaupungin kannalta on siirtyminen yhteispuhdistukseen.

Feasibility study of submerged membrane bioreactor (MBR) as an alternative to conventional activated sludge process (CASP) for municipal wastewater treatment: A pilot scale study

The conventional activated sludge processes (CAS) for the treatment of municipal wastewater are going to be outdated gradually due to more stringent environmental protection laws and regulations. The Membrane bioreactors (MBRs) are the most promising modern technology widely accepted in the world of wastewater treatment due to their highly pronounced features such as high quality effluent, less foot print and working under high MLSS concentration. This research project was carried out to investigate the feasibility and effectiveness of MBR technology compare to the CAS process based on the scientific facts and results. The pilot scale MBR pilot plant was run for more than 150 days and the analysis results were evaluated. The prime focus of the project was to evaluate the correlation of permeate flux under different operating MLSS concentrations. The permeate flux was found almost constant regardless of variations in MLSS concentrations. The removal of micropollutant such as heavy metals, PCPPs, PFCs, steroidal hormones was also studied. The micropollutant removal performance of MBR process was found relatively effective than CAS process. Furthermore, the compatibility of submerged membranes within the bioreactor had truly reduced the process footprint.

Treatment-related renal side-effects in pediatric cancer patients

Background: The long-term side-effects of cancer treatments are of growing importance, since the number of pediatric cancer survivors has considerably increased. Renal side-effects should be noted early to prevent further deterioration. Renal dysfunction may also develop long after cancer treatment. Easy and reliable methods for assessing renal function are needed. Aims: The aims were to find the mechanisms behind methotrexate-induced renal damage by studying renal tubular cells (LLC-PK1cells), and to evaluate the usefulness of laboratory tests in assessing glomerular function in pediatric cancer patients by comparing an isotope clearance method with alternative methods. The aim was also to study the long-term effects of bone marrow transplantation (BMT) and high-dose methotrexate (HD-MTX) treatment in renal function. Results: Methotrexate induced time-dependent renal tubular cell swelling and cell death. In patients treated with HD-MTX a significant decrease in GFR was noted after a follow-up time of one to ten years. One year after BMTthe GFR was reduced, especially in patients treated with total body irradiation (TBI). GFR recovered slightly but remained stable thereafter. In glomerular function assessment the serum cystatin C (cysC) concentration showed a significant association with GFR measured by the isotope method. Conclusions: Methotrexate induced acute damage in renal tubular cells. In assessing GFR the isotope method still remains the method of choice, but the assay of cystatin C was the most reliable of other alternatives. Long-term follow-up of renal function is needed in BMT patients and patients treated with HD-MTX.

Surgical Treatment of Colorectal Cancer. Controversial Issues

Aims: This study was carried out to evaluate surgical treatment of colorectal cancer (CRC) with special interest in present status and controversial issues: stenting as a palliative procedure for metastasized CRC (I), duration of thromboprophylaxis after the surgical treatment of CRC (II), treatment of the increasing population of elderly people (III) and the quality of life (QoL) after surgery for rectal cancer with special reference to pelvic floor dysfunction (IV). Materials and methods: The material consisted of patients with CRC operated on at Turku University Hospital between 2003 and 2008. In study II the data was collected retrospectively from electronic archives. In other studies the follow-up data was collected at postoperative control visits. In study IV the RAND-36 standardized questionnaire and additional questions assessing urinary, sexual and anorectal dysfunction were used. Results: The results of the current study showed that self-expanding metallic stents provided an alternative to palliative surgery in the treatment of obstructive CRC. Low molecular heparin given s.c. for a median of 11 days until hospital discharge seemed to provide sufficient thromboprophylaxis after surgery. With preoperative selection elderly patients with rectal cancer were suitable for major surgery for rectal cancer with morbidity and mortality rates comparable to those in younger patients. There was no difference between preoperative and one year postoperative general QoL for operated rectal cancer patients. Postoperative pelvic dysfunction was associated with an impaired QoL in some dimensions. Conclusions: Many individual factors regarding the patient and the disease must be taken into account when making treatment decisions in CRC to ensure successful treatment of CRC, patient satisfaction and QoL.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.

Developing Service-based Solutions for Water Treatment in Finnish Mining Industry

The aim of this master’s thesis is to analyze the mining industry customers' current and future needs for the water treatment services and discover new business development opportunities in the context of mine water treatment. In addition, the study focuses on specifying service offerings needed and evaluate suitable revenue generation models for them. The main research question of the study is: What kind of service needs related to water treatment can be identified in the Finnish mining industry? The literature examined in the study focused on industrial service classification and new service development process as well as the revenue generation of services. A qualitative research approach employing a case study method was chosen for the study. The present study uses customer and expert interviews as primary data source, complemented by archival data. The primary data was gathered by organizing total of 13 interviews, and the interviews were analyzed by using qualitative content analysis. The abductive-logic was chosen as the way of conducting scientific reasoning in this study. As a result, new service proposals were developed for Finnish mine industry suppliers. The main areas of development were on asset efficiency services and process support services. The service needs were strongly associated with suppliers’ know-how of water treatment process optimization, cost-effectiveness as well as on alternative technologies. The study provides an insight for managers that wish to pursue a water treatment services as a part of their business offering.

Modified nano- and microcellulose based adsorption materials in water treatment

In recent decades, industrial activity growth and increasing water usage worldwide have led to the release of various pollutants, such as toxic heavy metals and nutrients, into the aquatic environment. Modified nanocellulose and microcellulose-based adsorption materials have the potential to remove these contaminants from aqueous solutions. The present research consisted of the preparation of five different nano/microcellulose-based adsorbents, their characterization, the study of adsorption kinetics and isotherms, the determination of adsorption mechanisms, and an evaluation of adsorbents’ regeneration properties. The same well known reactions and modification methods that were used for modifying conventional cellulose also worked for microfibrillated cellulose (MFC). The use of succinic anhydride modified mercerized nanocellulose, and aminosilane and hydroxyapatite modified nanostructured MFC for the removal of heavy metals from aqueous solutions exhibited promising results. Aminosilane, epoxy and hydroxyapatite modified MFC could be used as a promising alternative for H2S removal from aqueous solutions. In addition, new knowledge about the adsorption properties of carbonated hydroxyapatite modified MFC as multifunctional adsorbent for the removal of both cations and anions ions from water was obtained. The maghemite nanoparticles (Fe3O4) modified MFC was found to be a highly promising adsorbent for the removal of As(V) from aqueous solutions due to its magnetic properties, high surface area, and high adsorption capacity . The maximum removal efficiencies of each adsorbent were studied in batch mode. The results of adsorption kinetics indicated very fast removal rates for all the studied pollutants. Modeling of adsorption isotherms and adsorption kinetics using various theoretical models provided information about the adsorbent’s surface properties and the adsorption mechanisms. This knowledge is important for instance, in designing water treatment units/plants. Furthermore, the correspondence between the theory behind the model and properties of the adsorbent as well as adsorption mechanisms were also discussed. On the whole, both the experimental results and theoretical considerations supported the potential applicability of the studied nano/microcellulose-based adsorbents in water treatment applications.