10 resultados para Topology in art
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Fuel cells are a promising alternative for clean and efficient energy production. A fuel cell is probably the most demanding of all distributed generation power sources. It resembles a solar cell in many ways, but sets strict limits to current ripple, common mode voltages and load variations. The typically low output voltage from the fuel cell stack needs to be boosted to a higher voltage level for grid interfacing. Due to the high electrical efficiency of the fuel cell, there is a need for high efficiency power converters, and in the case of low voltage, high current and galvanic isolation, the implementation of such converters is not a trivial task. This thesis presents galvanically isolated DC-DC converter topologies that have favorable characteristics for fuel cell usage and reviews the topologies from the viewpoint of electrical efficiency and cost efficiency. The focus is on evaluating the design issues when considering a single converter module having large current stresses. The dominating loss mechanism in low voltage, high current applications is conduction losses. In the case of MOSFETs, the conduction losses can be efficiently reduced by paralleling, but in the case of diodes, the effectiveness of paralleling depends strongly on the semiconductor material, diode parameters and output configuration. The transformer winding losses can be a major source of losses if the windings are not optimized according to the topology and the operating conditions. Transformer prototyping can be expensive and time consuming, and thus it is preferable to utilize various calculation methods during the design process in order to evaluate the performance of the transformer. This thesis reviews calculation methods for solid wire, litz wire and copper foil winding losses, and in order to evaluate the applicability of the methods, the calculations are compared against measurements and FEM simulations. By selecting a proper calculation method for each winding type, the winding losses can be predicted quite accurately before actually constructing the transformer. The transformer leakage inductance, the amount of which can also be calculated with reasonable accuracy, has a significant impact on the semiconductor switching losses. Therefore, the leakage inductance effects should also be taken into account when considering the overall efficiency of the converter. It is demonstrated in this thesis that although there are some distinctive differences in the loss distributions between the converter topologies, the differences in the overall efficiency can remain within a range of a few percentage points. However, the optimization effort required in order to achieve the high efficiencies is quite different in each topology. In the presence of practical constraints such as manufacturing complexity or cost, the question of topology selection can become crucial.
Resumo:
This research deals with obstacles and opportunities with respect to creativity. It mainly focuses on the author's most meaningful discoveries as an individual and a professional in the field of theatre during the past two years of her education. The research is a description of that transitional phase in her life. Firstly, the research discusses creativity and presence. Secondly, it describes the author personally and professionally and compares her earlier and current ways of working. It contemplates the obstacles and opportunities considering her self-knowledge and creativity, and disucsses the problems she has faced on the way to freedom and well-being. Following this, the author presents the tools for increasing her creativity, self-knowledge and body awareness in theatre work: the Gestalt Method, Acting with the Inner Partner and the Authentic Movement. She discusses the relativity between overall well-being in life and the quality of theatre work. The final section of the present research discusses the process of directing the play Suurin on rakkaus in 2006. It deals with issues such as self-knowledge in directing, group management, the importance of terror and excitement in directing and ways of enduring both. The conclusion explanes the reasons behind the author's capability of working with small groups, with creative and passionate theatre workers. It also lists the benefits of exploring one's passions, cooperating with enthusiastic and creative artists and the pursuit for balance in art and in everyday life.
Resumo:
Medium-voltage motor drives extend the power rating of AC motor drives in industrial applications. Multilevel converters are gaining an ever-stronger foothold in this field. This doctoral dissertation introduces a new topology to the family of modular multilevel converters: the modular double-cascade converter. The modularity of the converter is enabled by the application of multiwinding mediumfrequency isolation transformers. Owing to the innovative transformer link, the converter presents many advantageous properties at a concept level: modularity, high input and output power quality, small footprint, and wide variety of applications, among others. Further, the research demonstrates that the transformer link also plays a key role in the disadvantages of the topology. An extensive simulation study on the new converter is performed. The focus of the simulation study is on the development of control algorithms and the feasibility of the topology. In particular, the circuit and control concepts used in the grid interface, the coupling configurations of the load inverter, and the transformer link operation are thoroughly investigated. Experimental results provide proof-of-concept results on the operation principle of the converter. This work concludes a research collaboration project on multilevel converters between LUT and Vacon Plc. The project was active from 2009 until 2014.
The art of "touching the kantele" : aspects of the effect of posture and movement in kantele playing
Resumo:
Utgångspunkten för avhandlingen är finländska konstnärsresor till Spanien under 1800-talet, och kontakterna med spansk konst och kultur. Endast ett fåtal finländare reste till Spanien, och inledningsvis utrycktes intresset för spansk konst i form av kopior efter gamla mästare, utförda både efter original utanför Spanien, och reproduktioner. Denna föga imponerande start efterföljdes av ett litet antal målare som verkligen reste till Spanien under 1800-talets senare hälft: Adolf von Becker (1831–1909), Albert Edelfelt (1854–1905) och Venny Soldan (1863–1945). Jag undersöker hur deras syn på landet manifesterades i deras resebilder i förhållande till den växande turistindustrin. Syftet med avhandlingen är att visa hur den resande målaren, likt en turist, föreställde sig, upplevde och tolkade den främmande kulturen, och hur detta avbildades och uttrycktes i deras resebilder. Vid sidan av ikonografisk analys och stilkritik utnyttjas forskningsmetoder från turismteorin. Resultatet av undersökningen visar att de flesta konstnärerna dyrkade konsten på Prado-museet, beundrade flamenco, Andalusiens vackra kvinnor, tjurfäktningar och zigenarna. De längtade efter en förgången och exotisk tid, samtidigt som de följde de vältrampade turiststigarna och hänfördes av de sedvanliga sevärdheterna; de reste i ett delvis mytiskt och delvis verkligt land. Likt turister (i allmänhet), såg de det de ville se, och sökte sig till på förhand inpräntade mentala (före)bilder. Resebilderna kan med fog tolkas som medvetet konstruerade minnen från resan, souvenirs d’Espagne. Samtidigt förstärkte och upprätthöll valen av motiv uppfattningen att Spaniens äldre konst och samtida kultur var mer ”äkta” (autentiska) än den kultur man själv tillhörde. Spanien uppfattades som en kvarleva från en förgången tid som hölls levande i nuet
Resumo:
Digital reproduction, The National Library of Finland, Centre for Preservation and Digitisation, Mikkeli
Resumo:
As the rapid development of the society as well as the lifestyle, the generation of commercial waste is getting more complicated to control. The situation of packaging waste and food waste – the main fractions of commercial waste in different countries in Europe and Asia is analyzed in order to evaluate and suggest necessary improvements for the existing waste management system in the city of Hanoi, Vietnam. From all waste generation sources of the city, a total amount of approximately 4000 tons of mixed waste is transported to the composting facility and the disposal site, which emits a huge amount of 1,6Mt of GHG emission to the environment. Recycling activity is taking place spontaneously by the informal pickers, leads to the difficulty in managing the whole system and uncertainty of the overall data. With a relative calculation, resulting in only approximately 0,17Mt CO2 equivalent emission, incinerator is suggested to be the solution of the problem with overloaded landfill and raising energy demand within the inhabitants.
Resumo:
Dedikaatio: Carolus Mannerheim.