Ja vet int va de heter på svenska : interaktion mellan tvåspråkiga elever och deras lärare i en enspråkig klassrumsdiskurs

This is a study about language and learning aspects in the interaction between pupils and teachers in classrooms, where the majority of the pupils are bilingual. The aim of the dissertation is to develop the understanding of interactional learning possibilities and constraints in relation to a bilingual context. Language related learning is used as an overall conception which covers learning related to classroom discourse, language and subject. The empirical study has been made in a Swedish speaking school in a strongly Finnish dominated environment in the south of Finland. In the material, mainly consisting of video recorded lessons in forms one to three, the interaction between the pupils and the teachers is analysed. Building on a social constructionist perspective, where learning is regarded as a social phenomenon, situated and visible in changing participation, sequences where pupils or teachers make the language relevant are emphasised. The sequences are analysed in line with the conversation analytic (CA) approach. A fundamental result is an understanding of a monolingual classroom discourse, jointly constructed by teachers and pupils and visible in the pupils' interactionally problematized code-switching. This means that the pupils are not victims of a top-driven language policy; they are active co-constructors of the monolingual discourse. Through different repair initiations the pupils are doing interactional work in positioning themselves correctly in the monolingual discourse, which they simultaneously maintain. This work has a price in relation to time, knowledge and exactness. The pupils' problematized code-switching is often directly and shortly repaired by the teachers. This kind of repair promotes the pupils' participation and is not, as opposed to the results of research in everyday talk, dispreferred in pupil-teacher talk. When the pupils use the possibility to, in a comparatively easy way, participate and thus express their knowledge through codeswitching, and simultaneously talk a monolingual discourse into being, the teacher can, through direct repair, show an understanding in regard to the content, facilitate language learning and simultaneously confirm the pupils as competent speakers and bilingual individuals. Furthermore, significant results show that the monolingual norm has a function of a contrasting background which gives the pupils and the teachers a possibility to use language alternation as a functional and meaningful activity. The pupils use codeswitching as a way of protesting or expressing non-participation in the classroom talk. By making the pupils' bilingualism relevant, the teachers express understanding and empathy and encourage the pupils' participation in the classroom talk. Bilingualism is a nonpreferred, but functioning, resource in the interaction between pupils and teachers.

Antecedents and Performance Outcomes of Entrepreneurial Orientation: a Comparative Cross-Country Study

Development of entrepreneurial orientation (EO) within a company is considered to be significant for firm performance in a contemporary market society with constantly changing environment. Considered as entrepreneurial, the firm is able to innovate, make risky investments and be proactive. The purpose of the thesis is to investigate factors which influence EO, the impact of EO on firm performance, and a mediating role of EO in developed and emerging market contexts. The empirical research is conducted quantitatively in a form of a survey in Russia and Finland. The results of the thesis have shown that the relationship between antecedents, EO and firm performance outcomes is different in developed and emerging contexts and can be explained by cultural differences and institutional development. The empirical research has both theoretical and practical novelty. It contributes to the existing literature on EO by the usage of comparative cross-country approach and a broader three-way interaction model between the variables. A general practical implication of the research is that managers may benefit from developing entrepreneurial strategic posture in particular contexts.

Magnetic Resonance Experiments with Atomic Hydrogen

In this thesis three experiments with atomic hydrogen (H) at low temperatures T<1 K are presented. Experiments were carried out with two- (2D) and three-dimensional (3D) H gas, and with H atoms trapped in solid H2 matrix. The main focus of this work is on interatomic interactions, which have certain specific features in these three systems considered. A common feature is the very high density of atomic hydrogen, the systems are close to quantum degeneracy. Short range interactions in collisions between atoms are important in gaseous H. The system of H in H₂ differ dramatically because atoms remain fixed in the H₂ lattice and properties are governed by long-range interactions with the solid matrix and with H atoms. The main tools in our studies were the methods of magnetic resonance, with electron spin resonance (ESR) at 128 GHz being used as the principal detection method. For the first time in experiments with H in high magnetic fields and at low temperatures we combined ESR and NMR to perform electron-nuclear double resonance (ENDOR) as well as coherent two-photon spectroscopy. This allowed to distinguish between different types of interactions in the magnetic resonance spectra. Experiments with 2D H gas utilized the thermal compression method in homogeneous magnetic field, developed in our laboratory. In this work methods were developed for direct studies of 3D H at high density, and for creating high density samples of H in H₂. We measured magnetic resonance line shifts due to collisions in the 2D and 3D H gases. First we observed that the cold collision shift in 2D H gas composed of atoms in a single hyperfine state is much smaller than predicted by the mean-field theory. This motivated us to carry out similar experiments with 3D H. In 3D H the cold collision shift was found to be an order of magnitude smaller for atoms in a single hyperfine state than that for a mixture of atoms in two different hyperfine states. The collisional shifts were found to be in fair agreement with the theory, which takes into account symmetrization of the wave functions of the colliding atoms. The origin of the small shift in the 2D H composed of single hyperfine state atoms is not yet understood. The measurement of the shift in 3D H provides experimental determination for the difference of the scattering lengths of ground state atoms. The experiment with H atoms captured in H2 matrix at temperatures below 1 K originated from our work with H gas. We found out that samples of H in H2 were formed during recombination of gas phase H, enabling sample preparation at temperatures below 0.5 K. Alternatively, we created the samples by electron impact dissociation of H₂ molecules in situ in the solid. By the latter method we reached highest densities of H atoms reported so far, 3.5(5)x10¹⁹ cm^-3. The H atoms were found to be stable for weeks at temperatures below 0.5 K. The observation of dipolar interaction effects provides a verification for the density measurement. Our results point to two different sites for H atoms in H2 lattice. The steady-state nuclear polarizations of the atoms were found to be non-thermal. The possibility for further increase of the impurity H density is considered. At higher densities and lower temperatures it might be possible to observe phenomena related to quantum degeneracy in solid.

Studies on the Multifaceted Interaction of Atoms and an Electromagnetic Field

In this Thesis the interaction of an electromagnetic field and matter is studied from various aspects in the general framework of cold atoms. Our subjects cover a wide spectrum of phenomena ranging from semiclassical few-level models to fully quantum mechanical interaction with structured reservoirs leading to non-Markovian open quantum system dynamics. Within closed quantum systems, we propose a selective method to manipulate the motional state of atoms in a time-dependent double-well potential and interpret the method in terms of adiabatic processes. Also, we derive a simple wave-packet model, based on distributions of generalized eigenstates, explaining the finite visibility of interference in overlapping continuous-wave atom lasers. In the context of open quantum systems, we develop an unraveling of non-Markovian dynamics in terms of piecewise deterministic quantum jump processes confined in the Hilbert space of the reduced system - the non-Markovian quantum jump method. As examples, we apply it for simple 2- and 3-level systems interacting with a structured reservoir. Also, in the context of ion-cavity QED we study the entanglement generation based on collective Dicke modes in experimentally realistic conditions including photonic losses and an atomic spontaneous decay.

Interaction with industrial customers from a project selling company's perspective

This thesis studied the issue of interaction in industrial buyer-seller relationships. The aim of the thesis was to study the interaction from the seller’s perspective, especially from a project selling company’s perspective. The purpose of the thesis was to offer suggestions for the case company on how to improve interaction. The theoretical part of the study introduced the interaction framework of buyer-seller interaction, and the concept of interaction mechanisms. The focus was on studying the seller’s ways and means to utilize the interaction mechanisms. A case study research was conducted in the empirical part of the study, in which interaction in the case company was observed at a general level and through three different projects. The case company of the study was a project selling company. The case study data was gathered through individual interviews. Content Analysis was used as a research method for analyzing the case study data. Based on the case study findings, the results were drawn. The results indicated what should be done, in order to develop interaction in the case company. Finally, suggestions were provided for the case company on how to improve interaction, and a suggested interaction model was established for the case company. Although the thesis studied the topic from the viewpoint of only one specific company, it also offers outlook for other seller companies to improve their interaction.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

An interaction framework for deploying the knowledge of diasporas: Using Finland as an example

This study discusses the importance of diasporas’ knowledge with regard to the national competitive advantage of Finland. The purpose of this study is to suggest an interaction framework, which illustrates how diasporas can benefit the host country via intentional knowledge spillovers, with two sub-objectives: to seek which features are crucial for productive interaction between a host government and diasporas, and to scrutinize the modes of interaction currently effective in Finland. The theoretical background of the study consists of literature relating to the concepts of diaspora and knowledge. The empirical research conducted for this study is based on expert interviews. The interview data was collected between September and November 2013. Eight interviews were made; five with representatives of expert organizations, and three with immigrants. Thematic analysis was used to categorize and interpret the interview data. In addition, thematic networks were built to act as a basis of analysis. This study finds that knowledge, especially new combinations of knowledge, is a significant input in innovation. Innovation is found to be the basis of national competitive advantage. Thus the means through which knowledge is transferred are of key importance. Diasporas are found a good source of new knowledge, and thus may aid the innovative process. Host country stance and policy are found to have a major impact on the ability of the host country to benefit from diasporas’ knowledge. As a host country, this study finds Finland to have a very fragmented strategy field and a prejudiced attitude, which currently make it difficult to utilize the potential of diasporas. The interaction framework based on these findings suggests ways in which Finland can improve its national competitive advantage through acquiring the innovative potential of diasporas. Strategy revision and increased promotion are discussed as means towards improved interaction. In addition, the importance of learning is emphasized. The findings of this study enhance understanding of the relationship between the concepts of diaspora and knowledge. In addition, this study ties the relationship to economic benefit. Future research is, however, necessary in order to fully understand the meaning of the relationship, as well as to increase understanding of the generalizability of the interaction framework.

Organizing for Systemic Innovations – Research on Knowledge, Interaction and Organizational Interdependencies

Systemic innovation has emerged as an important topic due to the interconnected technological and sociotechnical change of our current complex world. This study approaches the phenomenon from an organizing perspective, by analyzing the various actors, collaborative activities and resources available in innovation systems. It presents knowledge production for innovation and discusses the organizational challenges of shared innovation activities from a dynamic perspective. Knowledge, interaction, and organizational interdependencies are seen as the core elements of organizing for systemic innovations. This dissertation is divided into two parts. The first part introduces the focus of the study and the relevant literature and summarizes conclusions. The second part includes seven publications, each reporting on an important aspect of the phenomenon studied. Each of the in-depth single-case studies takes a distinct and complementary systems approach to innovation activities – linking the refining of knowledge to the enabling of organizations to participate in shared innovation processes. These aspects are summarized as theoretical and practical implications for recognizing innovation opportunities and turning ideas into innovations by means of using information and organizing activities in an efficient manner. Through its investigation of the existing literature and empirical case studies, this study makes three main contributions. First, it describes the challenges inherent in utilizing information and transforming it into innovation knowledge. Secondly, it presents the role of interaction and organizational interdependencies in innovation activities from various novel perspectives. Third, it highlights the interconnection between innovations and organizations, and the related path dependency and anticipatory aspects in innovation activities. In general, the thesis adds to our knowledge of how different aspects of systems form innovations through interaction and organizational interdependencies. It highlights the continuous need to redefine information and adjust organizations and networks based on ongoing activities – stressing the emergent, systemic nature of innovation.

Integrated reporting – a new form of a firm’s interaction with stakeholders

This study examines a new kind of public reporting, called integrated reporting as a form of a firm’s interaction with stakeholders. The study concerned issues such as how the studied organization defined its stakeholders and how this definition evolved during the transition period from 2009 to 2013, how has the integrated reporting of the organization evolved as an instrument of interaction with stakeholders over the transition period, and how the organization reported its value creation according to the international integrated reporting framework in the final, full-featured report. In examining the theory, the study used a qualitative analysis method that allowed deriving conceptual tools necessary to carry out the study. This study is based on the material of the five integrated reports written in Russian from a subsidiary of a Russian public company. The subsidiary carried out the transition to an integrated reporting for the five years from 2009 to 2013. A comparative qualitative method was used in reviewing the empirical material. During the research, an active cooperation of the organization with key stakeholders was revealed, which occurred during the whole period of development of integrated reporting. As a result, integrated reports were produced in cooperation with various key stakeholders, allowing balancing the financial and non-financial information in the reports. The study found that during the transition period, integrated reports gradually changed in the direction of greater clarity and ease of access to perception, consistency of presentation and materiality. The integrated reporting of the organization began reflect the basic requirements of the international integrated reporting framework regarding the content elements and guiding principles. Thus, the organization’s reports began including features of financial and non-financial reporting and connecting the three aspects of the organization's activities: economic, environmental and social. This study reveals the importance of identifying key stakeholders and their influence on the creation of organizational value. The new form of reporting suits better the requirements of modern organizations to interact with their stakeholder groups. The integrated reporting, which reflects the principles of the international integrated reporting framework, is an active resource for companies to communicate with stakeholders and a platform of transmission the necessary information on the creation of value in the long term.

Foreign direct investment motives and location decision factors under economic recession: Three cases of Finnish FDI in Portugal

The purpose of this thesis was to study how uncertainty in economic conditions of the FDI host country affects location decision of an investment, and what kinds of motives are behind the investment decision to a country in economic recession, in this case Portugal. The country has attracted foreign direct investment steadily, but it is evident that most multinational firms and investors tend to be more interested in emerging economies in general. The aim was to find out also which host country specific advantages are important in this kind of cross-border investment and which factors are important for an FDI to succeed under economic uncertainty at the host country. The study was done by analyzing three Finnish case companies: a private equity and real estate investment firm Pontos Group, A wave energy technology research and development company AW Energy and NSN, Nokia Solutions and Networks, a global telecommunications company. The research was done empirically, by interviewing experts on the subject, mainly persons representing these companies. In addition relevant articles, journals and content from case companies’ web-pages is used for the desk research regarding the topic. The results of this thesis showed that the FDIs with strategic asset-seeking investments seem most profitable FDI types under uncertain economic conditions. This kind of investments aim to strengthen the company’s long-term strategy, including the time after recession. Firm-specific ownership advantages that bring competitive advantage proved out to be important under these circumstances, as well as first-mover advantages and externally created assets such as government promotional policies regarding FDI incentives. Also the location was considered suitable for resource- or efficiency seeking motives, based on the lowered price level at the host country. Problems were related mainly to financing, but as foreign companies receive financing usually from their home countries, the economic recession of the host country does not have significant effect for FDI decision, according to this study