The structure and development of Russia's food retail sector from the point of view of Finnish food industry

Tämän diplomityön tavoitteena on selvittää Venäjän ruoan vähittäiskaupan rakenne ja sen tuleva kehitys. Tällä hetkellä se on yksi maailman nopeimmin kasvavista markkinoista. Kasvun syynä on korkea öljyn hinta, jokaon kumuloitunut ihmisten palkkoihin. Kuitenkin vaikka tulot kasvavat, ruokaan käytetty osuus tuloista on pysynyt suhteellisen vakaana. Kulutus on siis siirtymässä laadukkaampiin ja arvokkaampiin tuotteisiin Modernien kauppojen osuus markkinoista on vielä pieni, koska Venäjän vähittäiskauppasektori on yhä hajaantunut perinteisiin kauppaformaatteihin kuten kioskeihin, toreille ja pieniin ruokakauppoihin. Kauppaketjut ovat kuitenkin tulossa merkittävämmiksi. Suurin markkina-alue vähittäiskauppiaille on Moskova, mutta tällä hetkellä ketjut laajentavat toimintojaan nopeasti myös muille Venäjän alueille. Parhaat kasvunäkymät ovat alueilla, vaikka Moskovan markkinat eivät olekaan kyllästyneet. Tärkein kasvua rajoittava tekijä Moskovassa on rakennustonttien ja kiinteistöjen saatavuus. Vähittäiskauppamarkkinat lähestyvät kyllästymispistettä, josta seuraa markkinoiden konsolidaatio. Tämä prosessi on jo alkanut, mutta kovin paljon yritysostoja ei ole vielätehty. Toistaiseksi kauppaketjut ovat tyytyneet muodostamaan alliansseja. Ketjut pyrkivät parantamaan asemaansa hintaneuvotteluissa muodostamalla osto-alliansseja, luomalla omia brändejä ja käyttämällä alueellista laajentumista lyömäaseena. Jotta ruoan tuottaja pääsisi myös alueellisille markkinoille, on sen ehkä suostuttava myymään tuotteitaan edullisempaan hintaan. Tavarantoimittajat ovat vahvassa asemassa silloin, kun heillä on toimiva jakeluverkko, kyky JIT-toimituksiin,kunnollinen dokumentaatiokäytäntö, vahva brändi ja edullinen hinta. Ns. listausmaksun suuruus voi määrittää tuottajan tuotteilleen saaman hyllytilan koon.

Russia's food retail sector from the point of view of Finnish food producers

This research paper focuses on the Russian food retail sector and its structure and development. At the momentit is one of the fastest growing markets today with 12.1% growth last year (2004). The growth originates from high oil price, which has been accumulated to people's wages. They are growing nominally more than 20% annually. But even though the income increases, the share of food of all retailtrade has been fairly stable with only a slight decline. Thus, the consumption is shifting to products with more quality and value. The shareof modern retail outlets is low, as the Russian retail sector is still very dispersed to traditional retail outlets such as kiosks, open markets and small grocery stores. The store chains are, however, becoming more and more significant. The biggest market for retailers is Moscow but nowadays the chains are expanding rapidly into other regions. Even though the markets have not been saturated in Moscow, the best prospects for growth are in the regions. The most important factor restricting the growth in Moscowis the availability of real estate and land plots for stores. The market is moving forward to saturation, and a consolidation process will follow. In fact, it has already started but not many acquisitions have been made so far. To this point the domestic chains have settled to form only alliances. The foreign players will be very strong in the tightening competition in the future. The problem of domestic chains is that the stores are nonstandardized, which is not cost-efficient. The chains are trying to enhance their power in price negotiations by forming purchasing alliances, introducing private label goods and using the regional expansion as a striking weapon. In order to follow the growing chains to other regions the producer must sell its products to the chains at favorable terms. Suppliers are strong in negotiations when they have a functioning distribution network, ability to JIT deliveries, proper documentationpolicies, a strong brand, reliability in deliveries and a fair price. The size of the entry ticket, i.e. the listing fee may define the shelf space a producer gets in the stores.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Database Rights in Safe European Home: The Path to More Rigorous Protection of Information

1. Introduction "The one that has compiled ... a database, the collection, securing the validity or presentation of which has required an essential investment, has the sole right to control the content over the whole work or over either a qualitatively or quantitatively substantial part of the work both by means of reproduction and by making them available to the public", Finnish Copyright Act, section 49.1 These are the laconic words that implemented the much-awaited and hotly debated European Community Directive on the legal protection of databases,2 the EDD, into Finnish Copyright legislation in 1998. Now in the year 2005, after more than half a decade of the domestic implementation it is yet uncertain as to the proper meaning and construction of the convoluted qualitative criteria the current legislation employs as a prerequisite for the database protection both in Finland and within the European Union. Further, this opaque Pan-European instrument has the potential of bringing about a number of far-reaching economic and cultural ramifications, which have remained largely uncharted or unobserved. Thus the task of understanding this particular and currently peculiarly European new intellectual property regime is twofold: first, to understand the mechanics and functioning of the EDD and second, to realise the potential and risks inherent in the new legislation in economic, cultural and societal dimensions. 2. Subject-matter of the study: basic issues The first part of the task mentioned above is straightforward: questions such as what is meant by the key concepts triggering the functioning of the EDD such as presentation of independent information, what constitutes an essential investment in acquiring data and when the reproduction of a given database reaches either qualitatively or quantitatively the threshold of substantiality before the right-holder of a database can avail himself of the remedies provided by the statutory framework remain unclear and call for a careful analysis. As for second task, it is already obvious that the practical importance of the legal protection providedby the database right is in the rapid increase. The accelerating transformationof information into digital form is an existing fact, not merely a reflection of a shape of things to come in the future. To take a simple example, the digitisation of a map, traditionally in paper format and protected by copyright, can provide the consumer a markedly easier and faster access to the wanted material and the price can be, depending on the current state of the marketplace, cheaper than that of the traditional form or even free by means of public lending libraries providing access to the information online. This also renders it possible for authors and publishers to make available and sell their products to markedly larger, international markets while the production and distribution costs can be kept at minimum due to the new electronic production, marketing and distributionmechanisms to mention a few. The troublesome side is for authors and publishers the vastly enhanced potential for illegal copying by electronic means, producing numerous virtually identical copies at speed. The fear of illegal copying canlead to stark technical protection that in turn can dampen down the demand for information goods and services and furthermore, efficiently hamper the right of access to the materials available lawfully in electronic form and thus weaken the possibility of access to information, education and the cultural heritage of anation or nations, a condition precedent for a functioning democracy. 3. Particular issues in Digital Economy and Information Networks All what is said above applies a fortiori to the databases. As a result of the ubiquity of the Internet and the pending breakthrough of Mobile Internet, peer-to-peer Networks, Localand Wide Local Area Networks, a rapidly increasing amount of information not protected by traditional copyright, such as various lists, catalogues and tables,3previously protected partially by the old section 49 of the Finnish Copyright act are available free or for consideration in the Internet, and by the same token importantly, numerous databases are collected in order to enable the marketing, tendering and selling products and services in above mentioned networks. Databases and the information embedded therein constitutes a pivotal element in virtually any commercial operation including product and service development, scientific research and education. A poignant but not instantaneously an obvious example of this is a database consisting of physical coordinates of a certain selected group of customers for marketing purposes through cellular phones, laptops and several handheld or vehicle-based devices connected online. These practical needs call for answer to a plethora of questions already outlined above: Has thecollection and securing the validity of this information required an essential input? What qualifies as a quantitatively or qualitatively significant investment? According to the Directive, the database comprises works, information and other independent materials, which are arranged in systematic or methodical way andare individually accessible by electronic or other means. Under what circumstances then, are the materials regarded as arranged in systematic or methodical way? Only when the protected elements of a database are established, the question concerning the scope of protection becomes acute. In digital context, the traditional notions of reproduction and making available to the public of digital materials seem to fit ill or lead into interpretations that are at variance with analogous domain as regards the lawful and illegal uses of information. This may well interfere with or rework the way in which the commercial and other operators have to establish themselves and function in the existing value networks of information products and services. 4. International sphere After the expiry of the implementation period for the European Community Directive on legal protection of databases, the goals of the Directive must have been consolidated into the domestic legislations of the current twenty-five Member States within the European Union. On one hand, these fundamental questions readily imply that the problemsrelated to correct construction of the Directive underlying the domestic legislation transpire the national boundaries. On the other hand, the disputes arisingon account of the implementation and interpretation of the Directive on the European level attract significance domestically. Consequently, the guidelines on correct interpretation of the Directive importing the practical, business-oriented solutions may well have application on European level. This underlines the exigency for a thorough analysis on the implications of the meaning and potential scope of Database protection in Finland and the European Union. This position hasto be contrasted with the larger, international sphere, which in early 2005 does differ markedly from European Union stance, directly having a negative effect on international trade particularly in digital content. A particular case in point is the USA, a database producer primus inter pares, not at least yet having aSui Generis database regime or its kin, while both the political and academic discourse on the matter abounds. 5. The objectives of the study The above mentioned background with its several open issues calls for the detailed study of thefollowing questions: -What is a database-at-law and when is a database protected by intellectual property rights, particularly by the European database regime?What is the international situation? -How is a database protected and what is its relation with other intellectual property regimes, particularly in the Digital context? -The opportunities and threats provided by current protection to creators, users and the society as a whole, including the commercial and cultural implications? -The difficult question on relation of the Database protection and protection of factual information as such. 6. Dsiposition The Study, in purporting to analyse and cast light on the questions above, is divided into three mainparts. The first part has the purpose of introducing the political and rationalbackground and subsequent legislative evolution path of the European database protection, reflected against the international backdrop on the issue. An introduction to databases, originally a vehicle of modern computing and information andcommunication technology, is also incorporated. The second part sets out the chosen and existing two-tier model of the database protection, reviewing both itscopyright and Sui Generis right facets in detail together with the emergent application of the machinery in real-life societal and particularly commercial context. Furthermore, a general outline of copyright, relevant in context of copyright databases is provided. For purposes of further comparison, a chapter on the precursor of Sui Generi, database right, the Nordic catalogue rule also ensues. The third and final part analyses the positive and negative impact of the database protection system and attempts to scrutinize the implications further in the future with some caveats and tentative recommendations, in particular as regards the convoluted issue concerning the IPR protection of information per se, a new tenet in the domain of copyright and related rights.

Governmental Measures to Enhance the Finnish Innovation System to Respond to the Challenge of Mitigating Climate Change

Climate innovations, that cover both technological applications and process and service innovations, play a key role in climate change mitigation. The purpose of this study was to examine how the Finnish innovation system could be enhanced with governmental measures so that the diffusion of climate innovations could be speeded up. During the study, it became evident that the governmental measures need to support the whole innovation chain, which comprises of research, development, demonstration and deployment. Only this can lead to the successful birth and diffusion of low carbon innovations. The study found that the strengths of the Finnish innovation system are research and development, and the current national innovation policies strongly support these activities. However, these have been emphasised at the expense of the demonstration and deployment. Consequently, the biggest bottlenecks in the Finnish innovation landscape are the lack of pilot and demonstration projects and slow commercialisation, thus the high price of the innovation. To meet with the challenge, the government should firstly promote strict greenhouse gas emission reduction targets. This would boost up the innovation activities, which would also lower the prices of the innovations. To speed up the commercialisation process, measures that stimulate the domestic market, such as feed-in-tariffs and public procurements, are needed. Special attention should also be paid to the measures that could shift the traditional closed innovation chain towards open innovation. This means that the product development should involve experts from several fields such as the user and marketing experts to speed up the commercialisation. In addition, efficient innovation co-operation between both private and public sector is essential. Finally, as the domestic resources are not adequate for producing all the innovations needed, the domestic innovation activities should be focused on a few sectors, and at the same time promote efficient import policies.

Sensory and Non-sensory Factors Behind the Liking and Choice of Healthy Food Products

A healthy and balanced diet can reduce health problems, such as overweight and metabolic syndrome. In general, people have a considerably good knowledge of what constitutes a healthy diet and how they could achieve it with their food choices. Besides, people argue that health is among their top five food choice motives. Nevertheless, the prevalence of overweight is increasing and other food choice motives, such as taste, seem to conflict with the health. Liking for food does not necessarily determine acceptance alone, thus several non-sensory factors, such as brand, country of origin and nutrition claim, can also influence. Moreover, consumers are individuals in how they prioritize sensory and nonsensory factors of foods, but e.g. increasing age, female gender and health concern have been connected to a more health-oriented dietary behaviour. To sum up, identifying different factors that can increase the liking and consumption of healthy food is essential in order to develop more attractive healthful food products. Adding vitamins, minerals, fibre or other ingredients to a food product can be used to enrich the nutritional quality of the products. However, this may be difficult in practice as regards the sensory quality and pleasantness of the foods. Generally, consumers are not willing to compromise on taste in food. On the other hand, consumers are very heterogeneous in their likings, and their personal values and attitudes may interact with preferences for specific sensory characteristics. The aims of this study were to investigate the effects of intrinsic product characteristics on sensory properties and hedonic responses; to determine the impact of few non-sensory factors; and to examine the interaction between sensory and non-sensory factors with consumers’ demographics, values and attitudes in liking of healthy model foods. The results showed that product composition influenced sensory quality and had an effect on hedonic responses. Adding flaxseed to bakery products showed a significant improvement in the nutritional quality without negative effects on sensory properties. On the other hand, the fortification of wellness beverages with vitamins and minerals may impart off-flavours. In general, sweetness of yoghurts, freshness of wellness beverages and low intensity of rye bread flavour appealed to consumers. Information about the domestic origin of yoghurts and claiming a specific function for wellness beverages enhanced liking. However, consumers who were more concerned about their health and considered natural content as an important food choice motive, rated sourer and less sweet yoghurts and wellness beverages as more pleasant. In addition, interest in health increased the consumption of rye breads and other whole grain breads among adolescents. The results showed that the optimal product quality in terms of intrinsic and extrinsic factors differs between individual consumers, and personal values and food choice motives can be connected to preferences for specific sensory characteristics of foods. This indicates that each food product needs to be considered in relation to its specific market niche, and to which segment of consumer will respond most positively to its characteristics.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

The collective dimension of freedom of religion or belief in international law : the application of findings to the case of Turkey

Pertinent domestic and international developments involving issues related to tensions affecting religious or belief communities have been increasingly occupying the international law agenda. Those who generate and, thus, shape international law jurisprudence are in the process of seeking some of the answers to these questions. Thus the need for reconceptualization of the right to freedom of religion or belief continues as demands to the right to freedom of religion or belief challenge the boundaries of religious freedom in national and international law. This thesis aims to contribute to the process of “re-conceptualization” by exploring the notion of the collective dimension of freedom of religion or belief with a view to advance the protection of the right to freedom of religion or belief. The case of Turkey provides a useful test case where both the domestic legislation can be assessed against international standards, while at the same time lessons can be drawn for the improvement of the standard of international review of the protection of the collective dimension of freedom of religion or belief. The right to freedom of religion or belief, as enshrined in international human rights documents, is unique in its formulation in that it provides protection for the enjoyment of the rights “in community with others”.1 It cannot be realized in isolation; it crosses categories of human rights with aspects that are individual, aspects that can be effectively realized only in an organized community of individuals and aspects that belong to the field of economic, social and cultural rights such as those related to religious or moral education. This study centers on two primary questions; first, what is the scope and nature of protection afforded to the collective dimension of freedom of religion or belief in international law, and, secondly, how does the protection of the collective dimension of freedom of religion or belief in Turkey compare and contrast to international standards? Section I explores and examines the notion of the collective dimension of freedom of religion or belief, and the scope of its protection in international law with particular reference to the right to acquire legal personality and autonomy religious/belief communities. In Section II, the case study on Turkey constitutes the applied part of the thesis; here, the protection of the collective dimension is assessed with a view to evaluate the compliance of Turkish legislation and practice with international norms as well as seeking to identify how the standard of international review of the collective dimension of freedom of religion or belief can be improved.

Haja-asutusalueiden sakokaivolietteiden kalkkistabilointi ja hyötykäyttö maataloudessa

In the sparsely populated areas of Finland there are approximately 350 000 households and 450 000 leisure time residences outside sewer networks. According to the Finnish domestic wastewater act outside sewer networks, the Finnish Government is reducing the environmental load of domestic wastewaters by the year 2017. The law is aimed at restricting the quality of sludge from domestic wastewater purification systems. The wastewater purification systems are complex systems, which often include sedimentation basins. The sedimentation basins remove most of the nutrients from the domestic wastewaters. The Finnish Government has decided that sedimentation basin sludge must be treated before reusing. One possibility is to stabilise domestic sludge with slaked lime and to reuse treated sludge in agriculture. According to this master’s thesis lime stabilisation can be done in sedimentation basins or in decanting tanks. Decanting tanks must be under 100 m3. Dosage of stabilisation is 8,5 kg/m3 of lime. If you are treading sludge that is highly hydrous, you need 13,5 kg/m3 of lime. In stabilisation lime and sludge must be thoroughly mixed. Mixed sludge must be in sedimentation basin at least two hours. If there is evidence that sludge contains salmonella or if it’s decanting tank stabilisation time is 48 hours. Sludge must be mixed at least once during the longer stabilisation time. Lime destroys Esherichia coli and enterococcus concentrations below accepted level. Lime also destroys Salmonella bacterium. After treating, sludge’s can be distributed over a field. You can safely spread lime treated domestic sludge’s about 40 m3/ha. Lime stabilisation can also be used to treat separately and collectively collected domestic wastewaters.

Tuotannon kehittäminen aihiotehtaassa

Työn tavoitteena oli kuvata Artowood Oy:ssä toteutettu tuotannon kehittämishanke sekä arvioida sen nykyistä tuotantoa. Lisäksi käsiteltiin yrityksen asemaa alihankintayrityksenä. Teoriaosuudessa verrattiin eri tuotannonohjausteorioita, käsiteltiin tuotannon ajoitukseen liittyviä kysymyksiä sekä paneuduttiin tuotannon kehittämiseen ja laatuun. Johtopäätöksenä, kehitetty tuotannonohjausjärjestelmä on toimiva nykyisissä olosuhteissa, mutta yrityksen kasvaessaon kiinnitettävä enemmän huomiota tuotannon ajoitusongelmien hallintaan. Lisäksi tuotannon laatua on joka tapauksessa kehitettävä. Artowood Oy on käynnistänyt toimenpiteet oman suoran viennin aloittamiseksi, sillä kotimaan markkinat ovat epävakaat kausivaihteluiden ja kiristyneen kilpailun seurauksena. Vientiprojektinonnistuminen on tärkeää, sillä kotimaassa on liian vähän sellaisia asiakkaita, joilla on tarve Artowood Oy:n tuotantoteknologian kannalta riittävän suurille valmistuserille.

Yhteisö-tv palvelukonseptina, case: Finnish Satellite Television Oy

Menestyäkseen nykymaailmassa ihmiset ovat turvautuneet toisiinsa muodostaen samallaerilaisia yhteisöjä ja verkostoja. Näille yhteisöille on tunnusomaista, että niissä vaikuttavien jäsenien ajatustavat yhtyvät keskenään. Yhteisöissä syntyy uusia ideoita ja keksintöjä. Niiden välittäminen maailmalle on usein kuitenkin ongelmallista. Digitaalisuus, Internet ja monet muut uudet teknologiat tuovat yhden ratkaisun ongelmaan. Eräs uuden teknologian mahdollistama kanava on yhteisötelevisio, jonka kautta yhteisön viestintää voidaan tehokkaasti välittää. Yhteisöilläei kuitenkaan ole teknistä taitoa toteuttaa tällaista palvelua. Yhteisöille, kuten pk-yrityksille, kouluille, seuroille, yhdistyksille ja jopa yksittäisille ihmisille, tuleekin pystyä tarjoamaan valmis konsepti, joka on helposti heidän käytettävissään. Tämä diplomityö toimii teknisenä pohjana Finnish Satellite Television Oy:n yhteisö-tv -palvelukonseptille, joka tullaan ottamaan laajamittaiseen käyttöön vuoden 2007 aikana. Työssä käydään läpi yhteisön ja yhteisöllisyyden tunnusmerkit ja peruspiirteet, luodaan katsaus yhteisötelevision alkutaipaleisiin, nykytilaan ja sen eri ratkaisuihin. Lisäksi tutustutaan yhteisö-tv:n kansainvälisiin ja kotimaisiin kokeiluihin ja pilottiprojekteihin. Työn teknisessä osassa tutkitaan yhteisötelevision mahdollistaviin teknologioihin, siirtoteihin sekä digitaalisiin tuotantojärjestelmiin. Lopuksi työssä kootaan yhteen käytettävyydeltään, liikutettavuudeltaan ja kustannustehokkuudeltaan sopivimmat tekniset toteutusvaihtoehdot konseptin käyttöönottoa varten.

Kansainvälisen suunnitteluprojektin malliproseduuri ja riskit - Case Viro

Useissa suomalaisissa rakennus- tai suunnitteluyrityksissä on selkeät tavoitteet ja odotukset liiketoiminnan kasvulle. Kasvun mahdollisuudet kotimarkkinoilla ovat rajalliset. Liiketoiminnan kasvua on haettava kotimarkkinoiden ulkopuolelta.Liiketoiminnan kasvua haettaessa alan yritykset ovat nopeasti kansainvälistyneet ja etabloituneet lähialueille. Erityisesti etabloitumista on tapahtunut Baltiaan, Viroon. Heräte tämän työn tekemiseen syntyi case-yrityksentoimenpiteistä kansainväistymisessä ja etabloitumisen aiheuttamasta oletettua suuremmasta kustannusten kehittymisestä. Tutkimuksella ja toimenpiteillä tuetaan etabloitumiskehitystä ja parannetaan liiketoimintaprojektin kustannustehokkuutta. Tutkimuksen tavoitteena oli case-yrityksen toimitusprosessin kuvaaminen, suositeltavan toimitusmallin rakentaminen liiketoimintaprojektille ja kohdemaan riskien kuvaaminen projektiriskikartalle. Kansainvälisen projektiliiketoiminnan erityispiirteitä ovat toimintaympäristön ja asiakkaiden erilaisuus, erilaiset pelisäännöt ja tavat toimia, erilainen kulttuuri ja arvot, tuntematon markkinoiden kysyntä- ja tarjontatilanne. Kansainvälisessä projektiliiketoiminnassa joudumme sopeutumaan ja sopeuttamaan totuttua toimintaamme toisenlaisiin olosuhteisiin. Toisenlaisista olosuhteista johtuen kotimarkkinoille ja kotimaisiin asiakastoimituksiin laadittuun toimintajärjestelmään kuvattu prosessimalli ei sellaisenaan ole toimiva. Samanaikaisesti riskikartta muodostuu kohdemaasta johtuen hyvin erilaiseksi. Tutkimuksen lähtökohta oli toisenlaisesta markkinasta, valituista toimitusprojekteista ja kokemuksesta oppiminen. Tutkimuksen tuloksena rakentui liiketoimintaprojektimalli, joka on selkeästivaiheistettu, roolitettu ja vastuutettu. Lisäksi toisenlaisista markkinoista ja projektimallista johtuen kuvattiin kohdemaan projektiriskikartta. Tutkimuksessa kuvattu liiketoimintaprojektimalli ja kohdemaan mukainen projektiriskikartta toimivat yrityksen seuraavana kehitysaskeleena toiminnan vakauttamisessa. Henkilöstön roolia ja kumppanuuksia tulee kuitenkin jatkossa tarkastella. Työn tuloksena syntyi yksittäisen yrityksen liiketoimintaprojektimallin projektiosien ja roolien kuvaus sekä riskikartta. Työn tuloksen arvioidaan selkeyttävän yrityksen liiketoimintaa ja osaltaan varmistavan yrityksen kansainvälisen liiketoiminnan tavoitteiden saavuttamista.

Suomalaisten jäte- ja jätevesialan yritysten yhteistyömahdollisuudet sekä uudet tuotekonseptit koti- ja ulkomaisen liiketoiminnan kehittämisessä

Diplomityö on tehty osana InnoEnvi-hanketta, joka on Etelä-Suomen ympäristöalan verkostoitumiseen ja tietoyhteiskunnan kehittymiseen tähtäävä toimintakokonaisuus. InnoEnvi on osa Etelä-Suomen maakuntien valmistelemaa InnoElli-ohjelmaa. InnoEnvi-hankkeen päätavoitteena on kehittyvän ympäristöklusterin luominen Etelä-Suomeen. Monet suomalaiset ympäristöalalle erikoistuneet yritykset ovat vielä tänä päivänä pieniä, nuoria ja pirstaleisia, minkä vuoksi ne tarvitsevat tukea ja yhteistyötä varsinkin vientimarkkinoille pyrkiessään. Tämän työn oleellisimpana tavoitteena oli kartoittaa Etelä-Suomen jäte- ja jätehuoltoalan yritysten yhteistyön mahdollisuuksia ja etuja, sekä yhteistyön tuomaa vaikutusta koti- ja ulkomaiseen liiketoimintaan. Tutkimusongelmaa lähestyttiin kartoittamalla Suomen tämänhetkistä jäte- ja jätevesihuollon tilaa ja käytössä olevaa teknologiaa sekä ympäristöliiketoimintaan vaikuttavia ohjauskeinoja. Ympäristöalan liiketoimintakenttään syvennyttiin tutkimalla alan verkostoitumista ja uusia verkostoitumisen mahdollisuuksia. Verkostoituneita yrityksiä ja yhteistyön lisätarvetta selvitettiin InnoEnvissä tehtyjen aiempien tutkimustulosten sekä tässä tutkimuksessa tehtyjen yrityshaastattelujen avulla. Uudet EU-maat panostavat tiukentuvien ympäristösäädösten takia ympäristönsuojeluun, mikä tekee niistä houkuttelevan ympäristöteknologian vientikohteen. Tässä työssä valittiin tutkimuksen kohteiksi Latvia ja Puola, joiden ympäristöteknologian tasoa ja kehitystarpeita selvitettiin vientipotentiaalin hahmottamiseksi. Molempien maiden jätevesi- ja varsinkin jätehuollossa on paljon kehitettävää, ja maissa panostetaankin kehitystoimiin monin erilaisin valtiollisin ohjelmin. Kotimaisen ympäristöliiketoiminnan kehittämiseksi työssä käsiteltiin neljää tuote- ja palvelukonseptia, jotka valittiin InnoEnvi-hankkeessa tehdystä ajankohtaisesta ympäristöalan investointihankekartoituksesta. Valitut konseptit ovat: REF-valmistuslaitos, jätevesilietteen käsittelylaitteisto, pilaantuneiden maiden käsittelytoimet sekä kaatopaikan lopettaminen. Tuotekonseptit jaettiin osatuotteisiin ja –palveluihin, joita verkostoituneet yritykset voisivat yhdessä tuottaa. Työkaluiksi yritysten kontakteihin nähtiin InnoEnvi-hankkeessa muodostetut miniklusterit ja niiden sisällä kehittyvä toiminta sekä hankkeessa rakennettu www-pohjainen Matching-palvelu. Tutkimuksessa löydettiin uusia mahdollisuuksia yhteistyötoiminnalle. Verkostoitumisessa nähdään haastattelujen mukaan monia etuja: tiedonsaanti, taloudelliset edut, toiminnan luotettavuus sekä uudet virikkeet markkinointiin ja tuotekehitykseen. Lisäyhteistyökumppaneille on haastattelujen mukaan tarvetta. Verkostoituminen tuo vientitoimintaa aloitteleville pk-sektorin yrityksille mahdollisuuden saavuttaa kansainvälistymiseen tarvittavia resursseja. Niin koti- kuin ulkomaisessakin liiketoiminnassa verkoston tärkeimmäksi tekijäksi osoittautui veturiyritys, joka voi vastata verkostossa muun muassa markkinoinnista ja tuotekehityksestä Vientitoiminnassa kohdemaan lainsäädännön ja yleisien toimintatapojen tunteminen on tärkeää. Paikalliset kohdemaan suunnittelu- ja urakointiyritykset ovat tärkeitä yhteistyökumppaneita vientihankkeessa. Latviassa jätehuoltoteknologian kehittämisen tarve on niin yhdyskunta-, ongelma- kuin teollisuusjätteidenkin osalta merkittävä. Puolassa jätesektorin ajankohtaisia aiheita ovat muun muassa kaatopaikkojen vähentäminen ja pakkausjätteen käsittely. Molempien esimerkkimaiden kohdalla jätevesihuollossa tullaan keskittymään lietteiden käsittelyn vaatimiin teknologian tarpeisiin. Vientiosiossa tehtiin vientiyhteistyöesimerkki, jossa tutkittiin kuvitteellista rakennusjätteen käsittelylaitoksen toimittamisprojektia Puolaan. Esimerkkiin saatiin tietoja InnoEnvissä tehdystä Puolan markkinatutkimuksesta. Tulokseksi saatiin viitteitä mahdollisista suomalaisista laitetoimittajista, viisi potentiaalista puolalaista suunnitteluyritystä sekä viisi puolalaista urakoitsijaa. On tärkeää, että kotimaisella yritysryppäällä on kokemusta sujuvasta yhteistyöstä ennen vientiprojektin toteuttamista. Tuotekonseptiesimerkkeihin kartoitettiin pääosa eteläsuomalaisista tuotteiden ja palvelujen tarjoajista. Tarkasteluun otettiin mukaan myös yrityksiä, joiden tuotteet tai palvelut olivat lähellä käsiteltyä konseptia. Tehtyjen yrityslistojen avulla on tarkoitus antaa virikkeitä uusien yritysryppäiden muodostamisesta sekä uusista tuote- ja palveluideoista, joille on nähtävissä markkinapotentiaalia. InnoEnvi-hankkeessa valmisteltujen työkalujen avulla eteläsuomalaiset yhteistyöstä kiinnostuneet yritykset voivat luoda kontakteja ja kokoontua miettimään tulevien investointihankkeiden toteuttamista kotimaassa ja myöhemmin jopa ulkomailla. Työn tuloksia esitellään InnoEnvi-hankkeen toimijoiden kautta jäteminiklusterissa toimiville eteläsuomalaisille yrityksille.

Lämpökäsitellyn puun logistiikkaketju

Työn tavoitteena oli selvittää lämpöpuukäsittelijän mahdollisuuksia laajentaa toimintaansa alihankinnan avulla lämpökäsiteltyjen tuotteiden loppuvalmistajiksi mahdollisesti myös uusilla tuotteilla. Ensin selvitettiin markkinoilla jo olevat lämpöpuusta tehdyt tuotteet. Tämän jälkeen kartoitettiin Suomessa ja ulkomailla toimivat lämpökäsittelylaitokset sekä niiden prosessit. Kirjallisuuden perusteella kerättiin tietoa lämpöpuun ominaisuuksista; eli mitä vaikutuksia lämpökäsittelyllä on puuhun. Edelleen kartoitettiin lämpöpuun logistiikkaketju puun valinnasta ja kaadosta aina loppukäyttäjälle asti. Lisäksi selvitettiin lämpökäsitellyn puun kustannusrakenne Suomessa. Lämpökäsittely on vasta kehittelyvaiheessa, joten lämpökäsittelystä puusta tehtyjä tuotteita on Suomessa saatavana lähinnä puualan liikkeistä tai suoraan lämpökäsittelylaitoksilta. Tällä hetkellä Suomessa eniten lämpökäsitellystä puusta tehtyjä tuotteita ovat saunat ja kalusteet. Suurin osa lämpöpuusta viedäänkin ulkomaille, jossa sitä käytetään lähinnä ulkoverhouksena.Lämpökäsittelyn puun menekin kasvua hidastaa lämpöpuun korkea hinta sekä tiedon puute jatkojalostajilla. Tiedon puutteen takia lämpökäsitelty puu onkin saanut maineeseensa kolauksen väärien työmenetelmien vuoksi. Lämpöpuun kehitys- sekä tutkimistyötä on vielä jatkettava. Laatu on avainasemassa näillä markkinoilla.