Sustainability of protein production by bioreactor processes using wind and solar power as energy sources

Food production account for significant share of global environmental impacts. Impacts are global warming, fresh water use, land use and some non-renewable substance consumption like phosphorous fertilizers. Because of non-sustainable food production, the world is heading to different crises. Both food- and freshwater crises and also land area and phosphorous fertilizer shortages are one of many challenges to overcome in near future. The major protein sources production amounts, their impacts on environment and uses are show in this thesis. In this thesis, a more sustainable than conventional way of biomass production for food use is introduced. These alternative production methods are photobioreactor process and syngas-based bioreactor process. The processes’ energy consumption and major inputs are viewed. Their environmental impacts are estimated. These estimations are the compared to conventional protein production’s impacts. The outcome of the research is that, the alternative methods can be more sustainable solutions for food production than conventional production. However, more research is needed to verify the exact impacts. Photobioreactor is more sustainable process than syngas-based bioreactor process, but it is more location depended and uses more land area than syngas-based process. In addition, the technology behind syngas-based application is still developing and it can be more efficient in the future.

Time consumption and damage to the remaining stock in mechanised and motor manual pre-commercial thinning

Abstract

Time consumption analysis of the mechanized cut-to-length harvesting system

[Abstract]

Information and Communication Society's Impact on Global Paper Consumption

Tämän tutkielman tavoitteena on selvittää informaatio- ja kommunikaatioyhteiskunnan vaikutusta paperin kulutukseen maailmanlaajuisesti. Tarkoituksena on löytää informaatio- ja kommunikaatioyhteiskuntaa kuvaavia mittareita, joiden avulla voidaan vertailla kehittyneitä ja kehittyviä markkina-alueita keskenään. Tutkimusongelmaan haetaan ratkaisua tutkimalla sekä kirjallisuutta että tilastoja, ja vertaamalla niitä esitettyihin teorioihin informaatio- ja kommunikaatioyhteiskunnan kehityksestä. Tutkielman avulla pyritään arvioimaan ja kuvaamaantoimintaympäristön muutoksia paperin kulutuksen suhteen pitkällä aikavälillä informaatio- ja kommunikaatioyhteiskunnan näkökulmasta.

Optimization of energy consumption in wastewater pumping

Pumppauksessa arvioidaan olevan niin teknisesti kuin taloudellisestikin huomattavia mahdollisuuksia säästää energiaa. Maailmanlaajuisesti pumppaus kuluttaa lähes 22 % sähkö-moottorien energiantarpeesta. Tietyillä teollisuudenaloilla jopa yli 50 % moottorien käyttämästä sähköenergiasta voi kulua pumppaukseen. Jäteveden pumppauksessa pumppujen toiminta perustuu tyypillisesti on-off käyntiin, jolloin pumpun ollessa päällä se käy täydellä teholla. Monissa tapauksissa pumput ovat myös ylimitoitettuja. Yhdessä nämä seikat johtavat kasvaneeseen energian kulutukseen. Työn teoriaosassa esitellään perusteet jätevesihuollosta ja jäteveden käsittelystä sekä pumppaussysteemin pääkomponentit: pumppu, putkisto, moottori ja taajuusmuuttaja. Työn empiirisessä osassa esitellään työn aikana kehitetty laskuri, jonka avulla voidaan arvioida energiansäästöpotentiaalia jäteveden pumppaussysteemeissä. Laskurilla on mandollista laskea energiansäästöpotentiaali käytettäessä pumpun tuoton ohjaustapana pyörimisnopeuden säätöä taajuusmuuttajalla on-off säädön sijasta. Laskuri ilmoittaa optimaalisimmanpumpun pyörimisnopeuden sekä ominaisenergiankulutuksen. Perustuen laskuriin, kolme kunnallista jätevedenpumppaamoa tutkittiin. Myös laboratorio-testitsuoritettiin laskurin simuloimiseksi sekä energiansäästöpotentiaalin arvioimiseksi. Tutkimukset osoittavat, että jätevedenpumppauksessa on huomattavia mandollisuuksia säästää energiaa pumpun pyörimisnopeutta pienentämällä. Geodeettisen nostokorkeuden ollessa pieni, voidaan energiaa säästää jopa 50 % ja pitkällä aikavälillä säästö voi olla merkittävä. Tulokset vahvistavat myös tarpeen jätevedenpumppaussysteemien toiminnan optimoimiseksi.

The effect of information and communication technology on global paper consumption

The objective of this thesis is to find out how information and communication technology affects the global consumption of printing and writing papers. Another objective is to find out, whether there are differences between paper grades in these effects. The empirical analysis is conducted by linear regression analysis using three sets of country-level panel data from 1990-2006. Data set of newsprint contains 95 countries, data set of uncoated woodfree paper 61 countries and data set of coated mechanical paper 42 countries. The material is based on paper consumption data of RISI’s Industry Statistics Database and on the information and communication technology data of GMID-database. Results indicate that number of Internet users has statistically significant negative effect on the consumption of newsprint and on the consumption of coated mechanical paper and number of mobile telephone users has positive effect on the consumptions of these papers. Results also indicate that information and communication technologies have only small effect on consumption of uncoated woodfree paper or no significant effect at all, but these results are more uncertain to some extent.

Ethnic sensitive substance abuse work : services for non-Finnish speaking clients in substance abuse treatment units in Finland today

The purpose of this study was to examine the current situation in substance abuse treatment units in Finland in taking non-Finnish speaking clients into consideration. The initiative for this research came from the Development of Alcohol and Drugs Intervention group at Stakes (National Research and Development Centre for Welfare and Health). Their aim was to gather information about the functioning and relevance of the quality assessment forms based on the quality recommendations for substance abuse work, filled in by substance abuse treatment units. The ethnic issue was chosen as the main approach in the study. The aim of this research was to answer the following questions: what is the readiness and competence in substance abuse treatment units in Finland to receive and encounter non-Finnish speaking clients, how is the quality of these services assessed and/or developed in the units, and what has been the role and functioning of the quality recommendations and quality assessment forms in working with non-Finnish speaking clients. The research methods used in the study were both quantitative and qualitative. The information concerning language services provided in the units was gathered from the quality assessment forms and basic information forms found in the database maintained by Stakes. The total amount of units found in the database was 267. In addition to that, semi-structured theme-interviews were carried out in four substance abuse treatment units in order to get a more deep understanding of how the services function in practice. The few number of non-Finnish speaking clients in the units may explain to a certain degree the results of the research. The results however showed that there is still space for improving the services. In the light of quality recommendations, the degree of language options provided in substance abuse treatment units in Finland today is low. Also the quantity of interpreter services provided in the units is scarce. There could also be unified guidelines specially tailored for substance abuse treatment units on how to work with ethnic minorities, as the knowledge is currently adopted from several different instances. The quality recommendations as well as quality assessment forms were valued and applied in the units appropriately and were also perceived to have an effect on the functioning, and quality, in the units.

Predictors and Correlates of Substance Use among Young Men. The Longitudinal “From a Boy to a Man” Birth Cohort Study.

Substance use is one of our most important public health problems. Studying risk factors in a longitudinal study setting helps to identify subgroups of young people at greater risk for substance-use-related problems, and to facilitate targeted prevention efforts. The aim of this thesis was to study childhood predictors and correlates of substance-use-related outcomes among young men in a longitudinal, nationwide birth cohort study. The study population included 10% of all Finnish-speaking boys born in Finland in 1981 (n=2946, 97% of the target population). In 1989, at age eight, valid measures of psychiatric symptoms (Rutter questionnaires and Children’s Depression Inventory) were obtained from parents, teachers and the boys themselves. In 1999, at age 18, boys were reached at their obligatory military call-up (n=2348, 80% of the boys attending the study in 1989). Self-reports of substance use, psychopathology, adaptive functioning (Young Adult Self-Report), and mental health service use were obtained through questionnaires. Information about psychiatric diagnoses from the Military Register (age 18-23 years) and information about offending from the National Police Register (age 16-20 years) were collected in early adulthood (92% of the 1989sample). Boys with childhood conduct, hyperactive, and comorbid conduct-emotional problems had elevated rates of substance use and substance-use-related crime in early adulthood. Depressive symptoms predicted daily smoking, especially among boys of low-educated fathers. Emotional problems predicted lower occurrence of drunkenness-related alcohol use and smoking. Teacher reports on boys’ problem behaviour had the best predictive power for later substance use. At age 18, frequent drunkenness associated with delinquency, smoking and illicit drug use, and having friends. Occasional drunkenness associated with better psychosocial functioning in general compared to boys with frequent drunkenness or without drunkenness-related alcohol use. Illicit drug use without drug offending was not predicted by childhood psychiatric symptoms, but 22% of boys with illicit drug use had a psychiatric diagnosis in early adulthood. Drug offenders, in turn, had psychiatric problems both in childhood and in adulthood. Psychiatric disorders were common among young men with substance-use-related crime. Recidivist crime associated strongly with having a substance use disorder diagnosis according to the Military Register. At age 18, frequent drunkenness was common among boys entering mental health services, but entering substance use treatment was non-existent. According to the findings of this thesis, substance-use-related outcomes accumulate in boys having psychiatric problems both in childhood and in early adulthood. Targeted early interventions in school health care systems, particularly for boys with childhood hyperactive, conduct, and comorbid conduct-emotional problems are recommended. Psychiatric problems and risky behaviours, such as delinquency should always be assessed alongside substance use. Specialized and multidisciplinary care are required for young men who have multiple or complex needs, for instance, for young men with drug offending and recidivist crime. Integrating a substance use treatment perspective with other services where young men are encountered is emphasized.

Consumption of Fashion Luxury Brands

The main objective of this study is to find out why people buy luxury brands and which factors influence their decisions. The elements of luxury brands as well as motivation, culture and self-concept is researched as being the main factors behind luxury consumption. It was important to conduct this study because the luxury market is growing with a fast pace and it has hardly been research before. This study was conducted as a qualitative research. Theoretical part is based on the literature and on researches conducted before about the matter. Purposeful sampling method was used in empirical part by interviewing designers Jukka Rintala and Hanna Sarén as well as consumers of luxury brands, who work in the fashion industry. Two different viewpoints were chosen in order to research if designers’ and consumers’ thoughts differed. This study shows that the elements of luxury brands are deemed pretty much the same all around the world and also between the designers and consumers interviewed. Exclusivity referring to unique design and “hard to get” as well as good quality meaning superior materials, were mentioned as the most important elements of luxury brands. According to this study motivation behind luxury consumption is to a great extent dependent on the culture where the luxuries are consumed. However, self-concept has the biggest effect on luxury consumption. This study shows that people in individualistic cultures buy luxuries because they want to. People tend to spoil themselves and show off, thus making them feel good when buying luxuries. However, uniqueness is appreciated. On contrast, in collectivistic cultures people buy luxuries because they have to. Social pressure is much greater in Eastern than in Western culture that being the reason wealth is expected show. This study shows that in some cases designers' and consumers' thoughts about luxury consumption differ. Especially, a big gap was found when talking about materialism behind luxury consumption. The designers did not believe it to be the reason behind luxury consumption where consumers strongly did.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.

Reduction of specific energy consumption of a thermomechanical pulping plant

Kuumahiertoprosessi on erittäin energiaintensiivinen prosessi, jonka energianominaiskulutus (EOK) on yleisesti 2–3.5 MWh/bdt. Noin 93 % energiasta kuluu jauhatuksessa jakautuen niin, että kaksi kolmasosaa kuluu päälinjan ja yksi kolmasosa rejektijauhatuksessa. Siksi myös tämän työn tavoite asetettiin vähentämään energian kulutusta juuri pää- ja rejektijauhatuksessa. Päälinjan jauhatuksessa tutkimuskohteiksi valittiin terityksen, tehojaon ja tuotantotason vaikutus EOK:een. Rejektijauhatuksen tehostamiseen pyrittiin yrittämällä vähentää rejektivirtaamaa painelajittelun keinoin. Koska TMP3 laitoksen jauhatuskapasiteettia on nostettu 25 %, tavoite oli nostaa päälinjan lajittelun kapasiteettia saman verran. Toisena tavoitteena oli pienentää rejektisuhdetta pää- ja rejektilajittelussa ja siten vähentää energiankulutusta rejektijauhatuksessa. Näitä tavoitteita lähestyttiin vaihtamalla päälinjan lajittimiin TamScreen-roottorit ja rejektilajittimiin Metso ProFoil-roottorit ja optimoimalla kuitufraktiot sihtirumpu- ja prosessiparametrimuutoksin. Syöttävällä terätyypillä pystyttiin vähentämään EOK:ta 100 kWh/bdt, mutta korkeampi jauhatusintensiteetti johti myös alempiin lujuusominaisuuksiin, korkeampaan ilmanläpäisyyn ja korkeampaan opasiteettiin. Myös tehojaolla voitiin vaikuttaa EOK:een. Kun ensimmäisen vaiheen jauhinta kuormitettiin enemmän, saavutettiin korkeimmillaan 70 kWh/bdt EOK-vähennys. Tuotantotason mittaamisongelmat heikensivät tuotantotasokoeajojen tuloksia siinä määrin, että näiden tulosten perusteella ei voida päätellä, onko EOK tuotantotasoriippuvainen vai ei. Päälinjan lajittelun kapasiteettia pystyttiin nostamaan TS-roottorilla vain 18 % jääden hieman tavoitetasosta. Rejektilajittelussa pystyttiin vähentämään rejektimäärää huomattavasti Metso ProFoil-roottorilla sekä sihtirumpu- ja prosessiparametrimuutoksin. Lajittamokehityksellä saavutettu EOK-vähennys arvioitiin massarejektisuhteen pienentymisen ja rejektijauhatuksessa käytetyn EOK:n avulla olevan noin 130 kWh/bdt. Yhteenvetona voidaan todeta, että tavoite 300 kWh/bdt EOK-vähennyksestä voidaan saavuttaa työssä käytetyillä tavoilla, mikäli niiden täysi potentiaali hyödynnetään tuotannossa.