Professional sports and gambling regulation in Finland - Examining the institutional factors of gambling affecting professional sport clubs in Finland

This study examines how to institutional environment of gambling is currently in motion both in Europe and Finland. Furthermore, it examines the criticism by Finnish professional sport clubs directed towards the national gambling monopolies, especially Veikkaus Oy. This criticism addresses the acclaimed issue of low or non-existing sponsorship funds coming to the clubs despite the clubs’ duties to promote Veikkaus Oy in their stadiums etc. In essence the main research objective was to examine the interaction and institutional environments of both Finnish professional sport clubs and gambling regulation. This was done through three sub-objectives: 1) to analyze professional sport as business and its institutional environment 2) to analyze the institutions of gambling in their current state and their potential future 3) to evaluate the potential impact of an institutional change in gambling legislation to the professional sport clubs The findings from Finland were then compared to those of Denmark where an institutional change had occurred in gambling regulation. Empirical data was collected through multiple interviews. Interviewees represented sport clubs (7), sport association (1), sport league (1), Finnish monopoly representatives (2), commercial gambling providers (1), Danish monopoly system representatives (1), Danish sport club (1). In addition a vast amount of secondary data (e.g. Green and white books by EU, court decisions, a variety of studies etc.). Theoretically this study combines the aspects of institutional theory with the theory of professional sports as business. This proved to be a rather new approach and no published literature was found to have done specifically this. The findings of this study are twofold, on the European level it is clear that the momentum if towards a more liberated gambling market while Finland is at the moment trying to go the opposite direction and uphold its monopoly. From the sport club’s level the findings suggest that currently sport clubs do not directly benefit from the funds originated from Veikkaus Oy as these funds are more or less used on the association/league levels. However, the clubs themselves are also lacking in self-criticism as they are lacking in clear sponsorship packages/programs which Veikkaus Oy might be interested in participating. If liberation of the gambling market would occur it is highly possible that that the largest clubs in football and ice-hockey would be the main beneficiaries while smaller clubs and sports could possibly be worse off than currently. These interpretations were well supported by the findings from Denmark.

Psychosocial aspects of cleft lip and palate. Implications for parental education

Lectio praecursoria

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

Harmonization ofsignificant environmental aspects and their risk assessment in UPM paper and pulp mills

Työn tavoite onharmonisoida yhtenäiset rakenteet UPM:n paperi- ja sellutehtaiden merkittävilleympäristönäkökohdille sekä niiden ympäristöriskienhallintajärjestelmille. Näin saavutetaan yhteneväiset tavoitteet ja analysointikeinot yrityksen yksiköille. Harmonisointiprosessi on osa koko yrityksen ympäristöhallintajärjestelmän kehittämistä. Ja konsernin EMS -prosessi puolestaan konvergoi konsernin integroidun johtamisjärjestelmän kehitystä. Lisäksi työn tapaustutkimuksessa selvitettiin riskienhallintajärjestelmien integroitumispotentiaalia. Sen avulla saavutettaisiin paremmin suuren yrityksen synergia-etuja ja vuorovaikutteisuutta toimijoiden kesken, sekä parannettaisiin riskienhallintajärjestelmän mukautuvuutta ja käytettävyyttä. Työssä käsitellään kolmea esimerkkiä, joiden pohjalta tehdään esitys harmonisoiduille merkittäville ympäristönäkökohdille sekä riskienhallintajärjestelmien parametreille. Tutkimusongelmaa lähestytään haastattelujen, kirjallisuuden, yrityksen PWC:llä teettämän selvityksen sekä omien päätelmien avulla. Lisäksi työssä esitetään ympäristöhallintajärjestelmän tehokkuuden todentaminen ympäristösuorituskyvyn muuttujiin suhteutettuna. Pohjana jatkuvan kehityksen päämäärälle on organisaatio-oppiminen, niin yksittäisen työntekijän, tiimien kuin eri yksiköiden kesken. Se antaa sysäyksen aineettoman omaisuuden, kuten ympäristö-osaamisen, hyödyntämiseen parhaalla mahdollisella tavalla. Tärkeimpinä lopputuloksina työssä ovat ehdotukset harmonisoiduille merkittäville ympäristönäkökohdille sekä ympäristöriskienhallintajärjestelmän määritetyille komponenteille. Niitä ovat määritelmät ja skaalat riskien todennäköisyydelle, seurauksille sekä riskiluokille. Työn viimeisenä osana luodaan pohja tapaustutkimuksen avulla Rauman tehtaan jätevedenpuhdistamon kahden erilaisen riskienhallintajärjestelmän integroitumiselle.

DFM(A)-Aspects of an Advanced Cable Gland Design

Nowadays typical motor junction boxes do not incorporate cable glands, which would provide good electrical performance interms of electromagnetic compatibility. In this paper, a manufacturability and assembly analysis for the new construction of a rigid body feeder cable junction of an electric motor is presented especially for converter drives (practical tests were carried out at LUT during 2007). Although the cable junction should also clamp the cable to provide enough tensile strength, the phase conductors should not get squashed by the groundingconnection. In order to ensure good performance in an electrical mean especially in converter drives, the grounding of the cable should be connected 360 degrees around the cable. In this paper, following manufacturing technologies are discussed: traditional turning, precision and centrifugal casting, and rotation moulding. DFM(A)-aspects are presented in detail.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

Selected Aspects Related to Pre-development Stages of International Software projects. Case of Finland and Russia

The question of Pilot Project creation, due to support pre-development stage of software product elaboration, nowadays might be used as an approach, which allows improving the whole scheme of information technology project running. This subject is not new, but till now no model has been presented, which gives deep description of this important stage on the early phase of project. This Master's Thesis represents the research's results and findings concerning the pre-development study from the Software Engineering point of view. The aspects of feasibility study, pilot prototype developments are analyzed in this paper. As the result, the technique of Pilot Project is formulated and scheme has been presented. The experimental part is focused on particular area Pilot Project scheme's implementation- Internationally Distributed Software projects. The specific characteristic, aspects, obstacles, advantages and disadvantages are considered on the example of cross border region of Russia and Finland. The real case of Pilot Project technique implementation is given.

Technical Aspects of Internet-Shopping, Comparative study in Finland/Russia

Isot ja keskikokoiset yritykset harkitsevat sähköistä kaupankäyntiä Internetissä, Internet - kauppojen muodossa. Organisaatiot pyrkivät kilpailukykyiseen ja moderniin tyyliin kaupankäynnissä sekä yrityksen eri prosessien automatisointiin. Yrityksen on onnistuttava uusimpien tekniikoiden ja työkalujen omaksumisessa kilpailukykynsä parantamiseksi. Sähköinen kaupankäynti on suhteellisen uusi tekniikka, joka mahdollistaa kaupankäynnin esittämisen uudessa, sähköisessä muodossa. Tämä työ sisältää katsauksen yrityksen mahdollisiin sähköisen kaupankäynnin eri muotoihin. Työ sisältää mahdollisia ratkaisuja Internet-kaupan rakentamiseen, sähköisen kaupankäynnin hallintaan sekä erityyppisten Internet- kauppojen kuvauksia. Sähköisen kaupankäynnin ongelmat ovat myös tarkastelussa. Välttämättömät asiat sähköisen kaupankäynnin perustamiseksi on lueteltu. Työn kokeellinen osuus sisältää vertailututkimusta sähköisen kaupankäynnin muodoista Suomessa ja Venäjällä. Sähköisen kaupankäynnin ongelmat, niiden mahdolliset ratkaisut, eroavaisuudet sekä samankaltaisuudet molempien maiden välillä on esitetty tässä työssä. Työssä on arvioitu Internet-kaupan kehittämistä sekä edistämistä esimerkein. Tutkimuksen tulokset on esitetty.

Spatiotemporal Aspects of Environmental Monitoring in the Complex Coastal Region of Southwest Finland

The management and conservation of coastal waters in the Baltic is challenged by a number of complex environmental problems, including eutrophication and habitat degradation. Demands for a more holistic, integrated and adaptive framework of ecosystem-based management emphasize the importance of appropriate information on the status and changes of the aquatic ecosystems. The thesis focuses on the spatiotemporal aspects of environmental monitoring in the extensive and geomorphologically complex coastal region of SW Finland, where the acquisition of spatially and temporally representative monitoring data is inherently challenging. Furthermore, the region is subject to multiple human interests and uses. A holistic geographical approach is emphasized, as it is ultimately the physical conditions that set the frame for any human activity. Characteristics of the coastal environment were examined using water quality data from the database of the Finnish environmental administration and Landsat TM/ETM+ images. A basic feature of the complex aquatic environment in the Archipelago Sea is its high spatial and temporal variability; this foregrounds the importance of geographical information as a basis of environmental assessments. While evidence of a consistent water turbidity pattern was observed, the coastal hydrodynamic realm is also characterized by high spatial and temporal variability. It is therefore also crucial to consider the spatial and temporal representativeness of field monitoring data. Remote sensing may facilitate evaluation of hydrodynamic conditions in the coastal region and the spatial extrapolation of in situ data despite their restrictions. Additionally, remotely sensed images can be used in the mapping of many of those coastal habitats that need to be considered in environmental management. With regard to surface water monitoring, only a small fraction of the currently available data stored in the Hertta-PIVET register can be used effectively in scientific studies and environmental assessments. Long-term consistent data collection from established sampling stations should be emphasized but research-type seasonal assessments producing abundant data should also be encouraged. Thus a more comprehensive coordination of field work efforts is called for. The integration of remote sensing and various field measurement techniques would be especially useful in the complex coastal waters. The integration and development of monitoring system in Finnish coastal areas also requires further scientific assesement of monitoring practices. A holistic approach to the gathering and management of environmental monitoring data could be a cost-effective way of serving a multitude of information needs, and would fit the holistic, ecosystem-based management regimes that are currently being strongly promoted in Europe.

Handover aspects in Unlicensed Mobile Access Technology

Fixed Mobile Convergence is the recent buzz in the field of telecommunication technology. Unlicensed Mobile Access (UMA) technology is a realistic implementation of Fixed Mobile Convergence. UMA involves communication between different types of networks. Handover is a very important issue in UMA. The study is an analysis of theoretical handover mechanism and practical test results. It includes a new proposal for handover performance test in UMA. It also provides an overview of basic handover operation on different scenarios in UMA. The practical test involves an experiment on handover performance test using network analyzers. The new proposal provides a different approach for an experimental setting on handover performance test without using network analyzers. The approach is not be implemented because of some technical problem in a network equipment in UMA. The analysis of the test results reveals that time of handover between UMA and Global System for Mobile Communication (GSM) network is similar to time of handover between inter base station controller (BSC) handover in GSM networks. The new approach is simple and provides measurement at the end point communicating entities. The study gives a general understanding of handover operation, an analysis of handover performance in UMA and specifically provides a new approach useful for further study of handover in different real world environments and scenarios.

Adaptive optimization schemes for mobile VoIP applications Battery life and call quality aspects

In this thesis programmatic, application-layer means for better energy-efficiency in the VoIP application domain are studied. The work presented concentrates on optimizations which are suitable for VoIP-implementations utilizing SIP and IEEE 802.11 technologies. Energy-saving optimizations can have an impact on perceived call quality, and thus energy-saving means are studied together with those factors affecting perceived call quality. In this thesis a general view on a topic is given. Based on theory, adaptive optimization schemes for dynamic controlling of application's operation are proposed. A runtime quality model, capable of being integrated into optimization schemes, is developed for VoIP call quality estimation. Based on proposed optimization schemes, some power consumption measurements are done to find out achievable advantages. Measurement results show that a reduction in power consumption is possible to achieve with the help of adaptive optimization schemes.