Perspectives for the production and usage of wood chips as a source of energy in the North-West of Russia

The development of bioenergy on the basis of wood fuels has received considerable attention in the last decades. The combination of large forest resources and reliance on fossil fuels makes the issue of wood chips usage in Russia an actual topic for the analysis. The main objective of this study is to disclose the current state and perspectives for the production of wood chips and their usage as a source of energy in the North-West of Russia. The study utilizes an integrated approach to explore the market of wood chips on the basis of comprehensive analysis of documentation and expert opinions. The analysis of wood chips market was performed for eight regions of the North-West district of Russia within two major dimensions: its current state and perspectives in the nearest five years. The results of the study show a comprehensive picture of the wood chips market, including the potential for wood chips production, the specific features of production and consumption and the perspectives for the market development within the regions of the North-West district of Russia. The study demonstrated that the market of wood chips is underdeveloped in the North-West of Russia. The findings of the work may be used by forest companies for the strategic planning.

Modernization of protection and control system of HV/MV substation in Russia

This work describes different possibilities of protection and control system improvement of primary distribution substation. The status of condition and main problems of power networks from reliability point of view in Russia are described. This work studies technologies used today in Russia for protection of distribution networks with their disadvantages. Majority of medium voltage networks (6-35 kV) has isolated network point. There is still no any protection available on the market which allows to estimate distance to fault in case of earth fault. The thesis analyses methods of earth fault distance calculation. On the basis of computer simulation the influence of various factors on calculation accuracy is studied. The practical implementation of the method presupposes usage of digital relay. Application of digital relay is accompanied by numerous opportunities which are described in this work. Also advantages of system implemented on the basis of IEC 61850 standard are examined. Finally, suitability of modern digital relays from GOST standard point of view is analyzed.

On the potential utilisation of sawdust and wood chip screenings

This work is based on the utilisation of sawdust and wood chip screenings for different purposes. A substantial amount of these byproducts are readily available in the Finnish forest industry. A black liquor impregnation study showed that sawdust-like wood material behaves differently from normal chips. Furthermore, the fractionation and removal of the smallest size fractions did not have a significant effect on the impregnation of sawdust-like wood material. Sawdust kraft cooking equipped with an impregnation stage increases the cooking yield and decreases the lignin content of the produced pulp. Impregnation also increases viscosity of the pulp and decreases chlorine dioxide consumption in bleaching. In addition, impregnation increases certain pulp properties after refining. Hydrotropic extraction showed that more lignin can be extracted from hardwood than softwood. However, the particle size had a major influence on the lignin extraction. It was possible to extract more lignin from spruce sawdust than spruce chips. Wood chip screenings are usually combusted to generate energy. They can also be used in the production of kraft pulp, ethanol and chemicals. It is not economical to produce ethanol from wood chip screenings because of the expensive wood material. Instead, they should be used for production of steam and energy, kraft pulp and higher value added chemicals. Bleached sawdust kraft pulp can be used to replace softwood kraft pulp in mechanical pulp based papers because it can improve certain physical properties. It is economically more feasible to use bleached sawdust kraft pulp in stead of softwood kraft pulp, especially when the reinforcement power requirement is moderate.

Effect of different potassium sources on the seasonal variation of potassium and free polyamines in scots pine needles

Summary

Extending the planting period of dormant and growing Norway spruce container seedlings to early summer

Abstract

Low-ARPU mobile offering in the selected markets of Russia and Eurasia

Tutkimuksen tavoitteena on analysoida alhaisen tuloluokan segmentille kohdennettavaa mobiilituotetarjoomaa lähtien kohdesegmenttien määrittelystä aina suositeltavien tuoteominaisuuksien rajaamiseen. Taustatutkimuksen avulla selvitetään mobiilimarkkinoiden kehitykseen vaikuttavia tekijöitä asiakaspotentiaalin ja tulevaisuudennäkymien arvioimiseksi. Haastattelututkimuksen avulla on selvitetty kohdesegmentin mobiilipalvelujen tarvetta ja kyseisten markkinoiden tarjoamia mahdollisuuksia, jotta tähän tarpeeseen voidaan kannattavasti vastata. Mobiilipalveluiden saattamiseksi myös alhaisten tuloluokkien ulottuville, on loppuasiakkaalle mobiililiittymän hankkimisesta aiheutuva kokonaiskustannus saatava laskettua huomattavasti nykyistä alhaisemmalle tasolle. Tämä edellyttää, että operaattorin on voitava karsia omia kustannuksiaan jokaisella osa-alueella, ja kehitettävä uusia liiketoimintamalleja kannattavuuden säilyttämiseksi. Pohjimmiltaan tämä tarkoittaa sujuvaa yhteistyötä verkkojen ja mobiilipuhelinten valmistajien kanssa, huolellista markkinoiden segmentointia sekä tuotetarjooman kohdentamista.

The Key Features of Knowledge and Knowledge Management in Product Development Process

Tutkimusongelmana oli kuinka tiedon johtamisella voidaan edesauttaa tuotekehitysprosessia. Mitkä ovat ne avaintekijät tietoympäristössä kuin myös itse tiedossa, joilla on merkitystä erityisesti tuotekehitysprosessin arvon muodostumiseen ja prosessien kehittämiseen? Tutkimus on laadullinen Case-tutkimus. Tutkimusongelmat on ensin selvitetty kirjallisuuden avulla, jonka jälkeen teoreettinen viitekehys on rakennettu tutkimaan rajattua ongelma-aluetta case-yrityksestä. Empiirisen tutkimuksen materiaali koostuu pääasiallisesti henkilökohtaisten teemahaastattelujen aineistosta. Tulokset merkittävimmistä tiedon hyväksikäytön haittatekijöistä, kuten myös parannusehdotukset on lajiteltu teoreettisessa viitekehyksessä esitettyjen oletustekijöiden mukaan. Haastatteluissa saadut vastaukset tukevat kirjallisuudesta ja alan ammattilaiselta saatua käsitystä tärkeimmistä vaikuttavista tekijöistä. Tärkeimmät toimenpiteet ja aloitteet joilla parannettaisiin tiedon muodostumista, koskivat ennnen kaikkea työnteon ulkoisia olosuhteita, eikä niinkään tiedon muodostumisen prosessia itseään. Merkittävimpiä haittatekijöitä olivat kultturiin, fyysiseen ja henkiseen tilaan ja henkilöstöresursseihin liittyvät ongelmat. Ratkaisuja ongelmiin odotettiin saatavan lähinnä tietotekniikan, henkilöstöresurssien ja itse tiedon muokkaamisen avulla. Tuotekehitysprosessin ydin tietovirtojen ja –pääomien luokittelu ja tulkitseminen tiedon muodostusta kuvaavan Learning Spiralin avulla antoi lähinnä teoreettisia viitteitä siitä millaisia keinoja on olemassa tiedon lisäämiseen ja jakamiseen eri tietotyypeittäin. Tulosten perusteella caseyrityksessä pitäisi kiinnittää erityistä huomiota tiedon dokumentointiin ja jakamiseen erityisesti sen tiedon osalta, joka on organisaatiossa vain harvalla ja/tai luonteeltaan hyvin tacitia.

Studying the recent situation of information and communication technology industry

Globaalinen liiketoimintaympäristö on muutoksessa. Uudet teknologiat muuttavat toimintaympäristöä ja talouden säännöt muuttuvat nopeasti. Uusia liiketoimintamalleja tarvitaan. Tutkimuksen tavoitteena oli analysoida tieto- ja viestintäteollisuuden (ICT-teollisuus) nykytilannetta strategisesta ja kilpailuanalyyttisestä näkökulmasta, sekä luoda kuva ICT-teollisuudesta ja sen suurista pelureista Euroopassa ja USA:ssa. Tutkimus analysoi viittä suurta ICT-alan yritystä. Tutkimus oli luonteeltaan sekä kvalitatiivinen että kvantitatiivinen. Yrityksiä analysoitiin käyttäen numeerista ja laadullista materiaalia. Tutkimus perustui kirjallisuuteen, artikkeleihin, tutkimusraportteihin, yritysten internet-kotisivuihin ja vuosikertomuksiin. Tutkimuksen tuloksena voitiin löytää sekä yhtäläisyyksiä että eroavaisuuksia yritysten liiketoimintamallien ja taloudellisen menestymisen väliltä.

Capability matrix – Identifying and evaluating the key capabilities of purchasing and supply management

Organizations gain resources, skills and technologies to find out the ultimate mix of capabilities to be a winner in the competitive market. These are all important factors that need to be taken into account in organizations operating in today's business environment. So far, there are no significant studies on the organizational capabilities in the field of PSM. The literature review shows that the PSM capabilities need to be studied more comprehensively. This study attempts to reveal and fill this gap by providing the PSM capability matrix that identifies the key PSM capabilities approached from two angles: there are three primary PSM capabilities and nine subcapabilities and, moreover, the individual and organizational PSM capabilities are identified and evaluated. The former refers to the PSM capability matrix of this study which is based on the strategic and operative PSM capabilities that complement the economic ones, while the latter relates to the evaluation of the PSM capabilities, such as the buyer profiles of individual PSM capabilities and the PSMcapability map of the organizational ones. This is a constructive case study. The aim is to define what the purchasing and supply management capabilities are and how they can be evaluated. This study presents a PSM capability matrix to identify and evaluate the capabilities to define capability gaps by comparing the ideal level of PSM capabilities to the realized ones. The research questions are investigated with two case organizations. This study argues that PSM capabilities can be classified into three primary categories with nine sub-categories and, thus, a PSM capability matrix with four evaluation categories can be formed. The buyer profiles are moreover identified to reveal the PSM capability gap. The resource-based view (RBV) and dynamic capabilities view (DCV) are used to define the individual and organizational capabilities. The PSM literature is also used to define the capabilities. The key findings of this study are i) the PSM capability matrix to identify the PSM capabilities, ii) the evaluation of the capabilities to define PSM capability gaps and iii) the presentation of the buyer profiles to identify the individual PSM capabilities and to define the organizational PSM capabilities. Dynamic capabilities are also related to the PSM capability gap. If a gap is identified, the organization can renew their PSM capabilities and, thus, create mutual learning and increase their organizational capabilities. And only then, there is potential for dynamic capabilities. Based on this, the purchasing strategy, purchasing policy and procedures should be identified and implemented dynamically.

Reaction Kinetics and Viscosity Modelling in the Fusion Syntheses of Ca- and Ca/Mg-resinates

Rosin is a natural product from pine forests and it is used as a raw material in resinate syntheses. Resinates are polyvalent metal salts of rosin acids and especially Ca- and Ca/Mg- resinates find wide application in the printing ink industry. In this thesis, analytical methods were applied to increase general knowledge of resinate chemistry and the reaction kinetics was studied in order to model the non linear solution viscosity increase during resinate syntheses by the fusion method. Solution viscosity in toluene is an important quality factor for resinates to be used in printing inks. The concept of critical resinate concentration, c crit, was introduced to define an abrupt change in viscosity dependence on resinate concentration in the solution. The concept was then used to explain the non-inear solution viscosity increase during resinate syntheses. A semi empirical model with two estimated parameters was derived for the viscosity increase on the basis of apparent reaction kinetics. The model was used to control the viscosity and to predict the total reaction time of the resinate process. The kinetic data from the complex reaction media was obtained by acid value titration and by FTIR spectroscopic analyses using a conventional calibration method to measure the resinate concentration and the concentration of free rosin acids. A multivariate calibration method was successfully applied to make partial least square (PLS) models for monitoring acid value and solution viscosity in both mid-infrared (MIR) and near infrared (NIR) regions during the syntheses. The calibration models can be used for on line resinate process monitoring. In kinetic studies, two main reaction steps were observed during the syntheses. First a fast irreversible resination reaction occurs at 235 °C and then a slow thermal decarboxylation of rosin acids starts to take place at 265 °C. Rosin oil is formed during the decarboxylation reaction step causing significant mass loss as the rosin oil evaporates from the system while the viscosity increases to the target level. The mass balance of the syntheses was determined based on the resinate concentration increase during the decarboxylation reaction step. A mechanistic study of the decarboxylation reaction was based on the observation that resinate molecules are partly solvated by rosin acids during the syntheses. Different decarboxylation mechanisms were proposed for the free and solvating rosin acids. The deduced kinetic model supported the analytical data of the syntheses in a wide resinate concentration region, over a wide range of viscosity values and at different reaction temperatures. In addition, the application of the kinetic model to the modified resinate syntheses gave a good fit. A novel synthesis method with the addition of decarboxylated rosin (i.e. rosin oil) to the reaction mixture was introduced. The conversion of rosin acid to resinate was increased to the level necessary to obtain the target viscosity for the product at 235 °C. Due to a lower reaction temperature than in traditional fusion synthesis at 265 °C, thermal decarboxylation is avoided. As a consequence, the mass yield of the resinate syntheses can be increased from ca. 70% to almost 100% by recycling the added rosin oil.

Studies on the Multifaceted Interaction of Atoms and an Electromagnetic Field

In this Thesis the interaction of an electromagnetic field and matter is studied from various aspects in the general framework of cold atoms. Our subjects cover a wide spectrum of phenomena ranging from semiclassical few-level models to fully quantum mechanical interaction with structured reservoirs leading to non-Markovian open quantum system dynamics. Within closed quantum systems, we propose a selective method to manipulate the motional state of atoms in a time-dependent double-well potential and interpret the method in terms of adiabatic processes. Also, we derive a simple wave-packet model, based on distributions of generalized eigenstates, explaining the finite visibility of interference in overlapping continuous-wave atom lasers. In the context of open quantum systems, we develop an unraveling of non-Markovian dynamics in terms of piecewise deterministic quantum jump processes confined in the Hilbert space of the reduced system - the non-Markovian quantum jump method. As examples, we apply it for simple 2- and 3-level systems interacting with a structured reservoir. Also, in the context of ion-cavity QED we study the entanglement generation based on collective Dicke modes in experimentally realistic conditions including photonic losses and an atomic spontaneous decay.

Did Jesus cite Isa 6:9-10? : Jesus’ saying in Mark 4:11-12 and the Isaianic idea of hardening and remnant

Mark 4:11-12 innehåller en av Jesu mest gåtfulla utsagor. När Jesus citerar Jes 6:9-10, ser det ut som om han skulle mena att han använder liknelserna för att hindra vissa människor att förstå vad han säger, ända därhän att de därigenom utesluts från möjligheten att göra bättring och att få förlåtelse av Gud. Men utryckte Jesus sig verkligen på detta sätt? Formulerades inte utsagan snarare av den tidiga kyrkan eller evangelisten? Eller gav utsagan - vare sig den härstammade från Jesus eller kyrkan - från början alls uttryck åt tanken att liknelserna hade en förstockande funktion? Under mera än ett århundrade har forskarna ställt frågor av detta slag. Denna forskning syftar till att undersöka om man kan finna en plausibel jesuansk mening hos utsagan. Den utgår från förutsättningen att den mening och funktion som man gav åt Jes 6:9-10 i den palestinska, judiska kontexten under andra Templets period är avgörande för att hitta en jesuansk mening hos utsagan.