Sensor communication in Smart cities and regions: An efficient IoT-based remote health monitoring system

Recent advances in Information and Communication Technology (ICT), especially those related to the Internet of Things (IoT), are facilitating smart regions. Among many services that a smart region can offer, remote health monitoring is a typical application of IoT paradigm. It offers the ability to continuously monitor and collect health-related data from a person, and transmit the data to a remote entity (for example, a healthcare service provider) for further processing and knowledge extraction. An IoT-based remote health monitoring system can be beneficial in rural areas belonging to the smart region where people have limited access to regular healthcare services. The same system can be beneficial in urban areas where hospitals can be overcrowded and where it may take substantial time to avail healthcare. However, this system may generate a large amount of data. In order to realize an efficient IoT-based remote health monitoring system, it is imperative to study the network communication needs of such a system; in particular the bandwidth requirements and the volume of generated data. The thesis studies a commercial product for remote health monitoring in Skellefteå, Sweden. Based on the results obtained via the commercial product, the thesis identified the key network-related requirements of a typical remote health monitoring system in terms of real-time event update, bandwidth requirements and data generation. Furthermore, the thesis has proposed an architecture called IReHMo - an IoT-based remote health monitoring architecture. This architecture allows users to incorporate several types of IoT devices to extend the sensing capabilities of the system. Using IReHMo, several IoT communication protocols such as HTTP, MQTT and CoAP has been evaluated and compared against each other. Results showed that CoAP is the most efficient protocol to transmit small size healthcare data to the remote servers. The combination of IReHMo and CoAP significantly reduced the required bandwidth as well as the volume of generated data (up to 56 percent) compared to the commercial product. Finally, the thesis conducted a scalability analysis, to determine the feasibility of deploying the combination of IReHMo and CoAP in large numbers in regions in north Sweden.

Biogeochemistry in acid sulphate soil landscapes and small urban centres in Western Finland

The overall purpose of this thesis was to increase the knowledge on the biogeochemistry of rural acid sulphate (AS) soil environments and urban forest ecosystems near small towns in Western Finland. In addition, the potential causal relationship between the distribution of AS soils and geographical occurence of multiple sclerosis (MS) disease was assessed based on a review of existing literature and data. Acid sulphate soils, which occupy an area of approximately 17–24 million hectare worldwide, are regarded as the nastiest soils in the world. Independent of the geographical locality of these soils, they pose a great threat to their surrounding environment if disturbed. The abundant metal-rich acid drainage from Finnish AS soils, which is a result of sulphide oxidation due to artificial farmland drainage, has significant but spatially and temporally variable ecotoxicological impacts on biodiversity and community structure of fish, benthic invertebrates and macrophytes. This has resulted in mass fish kills and even eradication of sensitive fish species in affected waters. Moreover, previous investigations demonstrated significantly enriched concentrations of Co, Ni, Mn and Al, metals which are abundantly mobilised in AS soils, in agricultural crops (timothy grass and oats) and approximately 50 times higher concentrations of Al in cow milk originating from AS soils in Western Finland. Nevertheless, the results presented here demonstrate, in general, relatively moderate metal concentrations in oats and cabbage grown on AS soils in Western Finland, although some of the studied fields showed anomalous values of metals (e.g. Co and Ni) in both the soil and target plants (especially oats), similar to that of the previous investigations. The results indicated that the concentrations of Co, Ni, Mn and Zn in oats and Co and Zn in cabbage were governed by soil geochemistry as these metals were correlated with corresponding concentrations extracted from the soil by NH4Ac-EDTA and NH4Ac, respectively. The concentrations of Cu and Fe in oats and cabbage were uncorrelated to that of the easily soluble concentrations in the soils, suggesting that biological processes (e.g. plant-root processes) overshadow geochemical variation. The concentrations of K and Mg in cabbage, which showed a low spread and were strongly correlated to the NH4Ac extractable contents in the soil, were governed by both the bioavailable fractions in the topsoil and plant-uptake mechanisms. The plant´s ability to regulate its uptake of Ca and P (e.g. through root exudates) seemed to be more important than the influence of soil geochemistry. The distribution of P, K, Ca, Mg, Mn and S within humus, moss and needles in and around small towns was to a high degree controlled by biological cycling, which was indicated by the low correlation coefficients for P, K, Ca, Mg and S between humus and moss, and the low spread of these nutrients in moss and needles. The concentration variations of elements in till are mainly due to natural processes (e.g. intrusions, weathering, mineralogical variations in the bedrock). There was a strong spatial pattern for B in humus, moss and needles, which was suggested to be associated with anthropogenic emissions from nearby town centres. Geogenic dust affected the spatial distribution of Fe and Cr in moss, while natural processes governed the Fe anomaly found in the needles. The spatial accumulation patterns of Zn, Cd, Cu, Ni and Pb in humus and moss were strong and diverse, and related to current industry, the former steel industry, coal combustion, and natural geochemical processes. An intriguing Cu anomaly was found in moss. Since it was located close to a main railway line and because the railway line´s electric cables are made of Cu, it was suggested that the reason for the Cu anomaly is corrosion of these cables. In Western Finland, where AS soils are particularly abundant and enrich the metal concentrations of stream waters, cow milk and to some extent crops, an environmental risk assessment would be motivated to elucidate if the metal dispersion affect human health. Within this context, a topic of concern is the distribution of multiple sclerosis as high MS prevalence rates are found in the main area of AS soils. Regionally, the AS soil type in the Seinäjoki area has been demonstrated to be very severe in terms of metal leaching, this area also shows one of the highest MS rates reported worldwide. On a local scale, these severe AS soil types coincide well with the corresponding MS clustering along the Kyrönjoki River in Seinäjoki. There are reasons to suspect that these spatial correlations are causal, as multiple sclerosis has been suggested to result from a combination of genetic and environmental factors.

Design and Drive-Cycle Based Analysis of Direct-Driven Permanent Magnet Synchronous Machine for a Small Urban Use Electric Vehicle

A direct-driven permanent magnet synchronous machine for a small urban use electric vehicle is presented. The measured performance of the machine at the test bench as well as the performance over the modified New European Drive Cycle will be given. The effect of optimal current components, maximizing the efficiency and taking into account the iron loss, is compared with the simple id=0 – control. The machine currents and losses during the drive cycle are calculated and compared with each other.

Kaupungin ja maaseudun vuorovaikutus alueellisessa kehittämispolitiikassa

In Finland, European Union membership and economic globalisation have changed the position of regions from closed territorial systems to nodes of open international networks. The increasing complexity of cities as globalised knowledge centres and functionally specialised and diversified rural areas, and on the other hand growing disparities between prosperous urban cores and lagging peripheral areas are also essential features in contemporary regional development. These trends have produced new needs to promote mutual dialogue between cities and the countryside in western market economies. Urban-rural interaction is an idea which was developed in the late 1990s within regional policy to pull together these new challenges to regional development and handle cities and the countryside as a whole. The aim of my study is to conceptualise the idea of urban-rural interaction, explain the phenomenon theoretically, clarify past and present urban and rural development and analyse regional policies from the interaction angle. The ultimate purpose is to illustrate the existence and nature of particular interaction policy in a globalising society. The general method is discourse analysis, which I use in three cases: Central Finland, South-Ostrobothnia and South-West Finland. Theoretically I have a two-dimensional approach. On the first hand I use World-System theory to explain how the global economy is moulding urban and rural structures at the regional level. On the other hand I use regime theory to explain local political actions and practises between cities and the countryside under the overlapping pressures deriving from reformulated regional structures and policies.

Adaptation to globalisation in Finland has been carried out by strengthening urban centres. The stress in regional policy has been in urban development. The development of the countryside has mostly been implemented by a separate rural policy. At the end of the 1990s and early 2000s Finnish cities have actually shown themselves to be competitive in global markets. The drawbacks of the new growth centre policy have been the sparse network of prosperous cities and their weak spreading effects, which have hindered comprehensive regional development. Tensions between urban and rural areas have also deepened. In this situation the interaction policy is used as a way of balancing development and moderate conflicts within the regions. From this point of view urban-rural interaction can be seen as a way of tackling the challenges of globalisation.

On the other hand the results emphasise that actors involved in regional development still believe, although the hegemonic discourse is on urban policy, that there are opportunities to stimulate progress in the countryside as well. In the situation where regional authorities control development resources, rural development can be successful only if rural actors manage to establish fruitful relationships with their urban partners. This is also the weakness of the programme-based regional policy. If rural municipalities or other actors are for any reason incapable of building development regimes with cities, the offers of interaction policy will be useless.

The problem of the interaction policy is that the focus and methods of it have so far been rather underdeveloped. In order to improve the efficiency of the interaction policy, further research should concentrate on the social processes which define the position of cities and the countryside as partners of interaction, and practises which promote or prohibit the possibilities of developing the interaction policy. The efforts to define different contents of urban-rural interaction or promote interaction projects should not have such an important role in the future as they have had so far. Instead, the focus of interaction policy should be on questions such as how to manage the political tensions between town and country and how to create a positive atmosphere for regional policy where the needs of urban and rural development are promoted equally.

Performance Evaluation of Six-Sectored Configuration in Hexagonal WCDMA (UMTS) Cellular Network Layout

The objective of this master's thesis is to evaluate the optimum performance of sixsectored hexagonal layout of WCDMA (UMTS) network and analyze the performance at the optimum point. The maximum coverage and the maximum capacity are the main concern of service providers and it is always a challenging task for them to achieve economically. Because the optimum configuration of a network corresponds to a configuration which minimizes the number of sites required to provide a target service probability in the planning area which in turn reduces the deployment cost. The optimum performance means the maximum cell area and themaximum cell capacity the network can provide at the maximum antenna height satisfying the target service probability. Hexagon layout has been proven as the best layout for the cell deployment. In this thesis work, two different configurations using six-sectored sites have been considered for the performance comparison. In first configuration, each antenna is directed towards each corner of hexagon, whereas in second configurationeach antenna is directed towards each side of hexagon. The net difference in the configurations is the 30 degree rotation of antenna direction. The only indoor users in a flat and smooth semi-urban environment area have been considered for the simulation purpose where the traffic distribution is 100 Erl/km2 with 12.2 kbps speech service having maximum mobile speed of 3 km/hr. The simulation results indicate that a similar performance can be achieved in both the configurations, that is, a maximum of 947 m cellrange at antenna height of 49.5 m can be achieved when the antennas are directed towards the corner of hexagon, whereas 943.3 m cell range atantenna height of 54 m can be achieved when the antennas are directed towards the side of hexagon. However, from the interference point of view the first configuration provides better results. The simulation results also show that the network is coverage limited in both the uplink and downlink direction at the optimum point.

Transparent and secure remote network storage system using an untrusted server

Työssä kehitettin läpinäkyvä Internet Small Computer Systems Interface-verkkolevyä (iSCSI) käyttävä varmistusjärjestelmä. Verkkolevyn sisältö suojattiin asiakaspään salauskerroksella (dm-crypt). Järjestely mahdollisti sen, että verkkolevylle tallennetut varmuuskopiot pysyivät luottamuksellisina, vaikka levypalvelinta tarjoava taho oli joko epäluotettava tai suorastaan vihamielinen. Järjestelmän hyötykäyttöä varten kehitettiin helppokäyttöinen prototyyppisovellus. Järjestelmän riskit ja haavoittuvuudet käytiin läpi ja analysoitiin. Järjestelmälle tehtiin myös karkea kryptoanalyysi sen teknistenominaisuuksien pohjalta. Suorituskykymittaukset tehtiin sekä salatulle että salaamattomalle iSCSI-liikenteelle. Näistä todettiin, että salauksen vaikutus suorituskykyyn oli häviävän pieni jopa 100 megabittiä sekunnissa siirtävillä verkkonopeuksilla. Lisäksi pohdittiin teknologian muita sovelluskohteita ja tulevia tutkimusalueita.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Analysis of the voltage source inverter with small DC-link capacitor

IIn electric drives, frequency converters are used to generatefor the electric motor the AC voltage with variable frequency and amplitude. When considering the annual sale of drives in values of money and units sold, the use of low-performance drives appears to be in predominant. These drives have tobe very cost effective to manufacture and use, while they are also expected to fulfill the harmonic distortion standards. One of the objectives has also been to extend the lifetime of the frequency converter. In a traditional frequency converter, a relatively large electrolytic DC-link capacitor is used. Electrolytic capacitors are large, heavy and rather expensive components. In many cases, the lifetime of the electrolytic capacitor is the main factor limiting the lifetime of the frequency converter. To overcome the problem, the electrolytic capacitor is replaced with a metallized polypropylene film capacitor (MPPF). The MPPF has improved properties when compared to the electrolytic capacitor. By replacing the electrolytic capacitor with a film capacitor the energy storage of the DC-linkwill be decreased. Thus, the instantaneous power supplied to the motor correlates with the instantaneous power taken from the network. This yields a continuousDC-link current fed by the diode rectifier bridge. As a consequence, the line current harmonics clearly decrease. Because of the decreased energy storage, the DC-link voltage fluctuates. This sets additional conditions to the controllers of the frequency converter to compensate the fluctuation from the supplied motor phase voltages. In this work three-phase and single-phase frequency converters with small DC-link capacitor are analyzed. The evaluation is obtained with simulations and laboratory measurements.

Regional Data Transmission Network

The globalization and development of an information society promptly change shape of the modern world. Cities and especially megacities including Saint-Petersburg are in the center of occuring changes. As a result of these changes the economic activities connected to reception and processing of the information now play very important role in economy of megacities what allows to characterize them as "information". Despite of wide experience in decision of information questions Russia, and in particular Saint-Petersburg, lag behind in development of information systems from the advanced European countries. The given master's thesis is devoted to development of an information system (data transmission network) on the basis of wireless technology in territory of Saint-Petersburg region within the framework of FTOP "Electronic Russia" and RTOP "Electronic Saint-Petersburg" programs. Logically the master's thesis can be divided into 3 parts: 1. The problems, purposes, expected results, terms and implementation of the "Electronic Russia" program. 2. Discussion about wireless data transmission networks (description of technology, substantiation of choice, description of signal's transmission techniques and types of network topology). 3. Fulfillment of the network (organization of central network node, regional centers, access lines, description of used equipment, network's capabilities), financial provision of the project, possible network management models.

Market Orientation in Rapidly Internationalizing Small Companies — Evidence from the Software Industry

For more than a decade, researchers have been aware of the increased pace of small-firm internationalization and the greater effect of these rapidly growing small businesses on the wealth, international trade, and job-creation opportunities of countries. Due to the small size of the home market, Finnish companies have been generally considered highly interested in internationalization. One particular domain in which rapid internationalization has been considered feasible is the global software business, with its knowledge-intensive nature and high growth potential. However, over time the failure rate of small entrepreneurial firms has remained especially high in high-technology markets. One of the reasons for this seems to lie in the fact that these companies are often formed by people with a strong technological background but limited competences in other areas. Further, research on the marketing capabilities of rapidly internationalizing high-tech firms has been scarce thus far. In addition, while there is much research on the first years of operations of rapidly internationalizing companies, it is not well known what becomes of them later on. Therefore, there is a need for more investigation into the managerial mindset, competences and decision-making in these small companies, especially from the perspective of how they acquire and exploit market knowledge, and enhance their networking capabilities in order to promote international expansion. The present study focuses on market orientation in small software firms that internationalize their operations rapidly in global software markets. It builds on qualitative data to illustrate how these companies develop their market-oriented product-market strategies during the process of increasing international commitment. It also shows how they manage their network relationships in order to be able to offer better customer service and to thrive in the fierce global competition. The study was conducted in the empirical context of Finnish small software companies, and the main data consists of interviews with top managers in these businesses. The interviews were designed to cover a minimum period of five years of the company's international operations, thus offering a retrospective in-depth perspective on market orientation, internationalization and partnerships in the given context. One particular focus is on less successfully internationalized software companies, and the challenges they face when approaching international markets. This study makes a significant contribution to the literature on market orientation for several reasons. First, building on data from the software industry, it clarifies the existing theory in the context of rapid internationalization and network relationships. Secondly, it provides a good body of evidence on market orientation in both successfully and less successfully internationalized companies, and identifies the key related differences between the two company groups. Thirdly, it highlights the importance of inter-firm networks in the rapid internationalization of small software firms, providing companies with important market knowledge and, in some cases, management challenges. Fourthly, this investigation clarifies market orientation in the context of different software-product strategies, thus, combining the perspectives of market orientation in both manufacturing and services. In sum, the results of the study are significant for both small software firms and public-policy makers since they shed light on the market-oriented managerial mindset and the market-information gathering and sharing processes that are needed in successful rapid internationalization.

Small scale waste management. Composting project in selected schools in Mwanza, Tanzania

No 2/2008, sivu 8.

Small scale energy production in Helsinki Metropolitan area in emission trading point of view

Emission trading with greenhouse gases and green certificates are part if the climate policy the main target of which is reduce greenhouse gas emissions. The carbon dioxide and fine particle emissions of energy production in Helsinki Metropolitan area are calculated in this study. The analysis is made mainly by district heating point of view and the changes of the district heating network are assessed. Carbon dioxide emissions would be a bit higher, if the district heating network is expanded, but then the fine particle emissions would be much lower. Carbon dioxide emissions are roughly 10 % higher, if the district heating network is expanded at same rate as it has in past five years in the year 2030. The expansion of district heating network would decrease the fine particle emissions about 40 %. The cost of the expansion is allocated to be reduction cost of the fine particle emissions, which is considerably higher than the traditional reduction methods costs. The possible new nuclear plant would reduce the emissions considerably and the costs of the nuclear plant would be relatively low comparing the other energy production methods.

The Role of Network Competence in Internationalization of SMEs

Network competence is the ability of firms to manage their network of business relationships and to deal effectively with interactions in these relationships. The relationship between level of business relationship abilities of firms and their internationalization has been researched before, and found to be positive. However, what network competence specifically offers is an established scale with which to perform this examination quantitatively. This master’s thesis examined the role which this network competence plays in the internationalization of firms, more specifically in Finnish small and medium sized enterprises (SMEs). The theoretical part of the thesis consisted of examination into the nature of internationalization of SMEs, their business relationships, network competence and related concepts. The empirical part was conducted statistically with quantitative methods on data gathered from Finnish SMEs through a web-survey during 2008. Network competence was found to result in better internationalization among the examined Finnish SMEs with both subjective and objective performance measures, and firms with higher levels of network competence were found to be more likely to become international. On the other hand, speed of internationalization could not be linked to better network competence, and no clear industry-specific differences were found. The results show that by developing their network competence, Finnish SMEs can increase their chances of success and performance in their internationalization process