On sliding mode control ofhydraulic servo systems and a manipulator

The aim of the study is to developa novel robust controller based on sliding mode control technique for the hydraulic servo system with flexible load and for a flexible manipulator with the lift and jib hydraulic actuators. For the purpose of general control design, a dynamic model is derived describing the principle physical behavior for both the hydraulic servo system and the flexible hydraulic manipulator. The mechanism of hydraulic servo systems is described by basic mathematical equations of fluid powersystems and the dynamics of flexible manipulator is modeled by the assumed modemethod. The controller is constructed so as to track desired trajectories in the presence of model imprecision. Experimental and simulation results demonstratethat sliding mode control has benefits which can be used to guarantee stabilityin uncertain systems and improve the system performance and load tolerance.

Sliding Mode Control for Switched Mode Power Supplies

Control applications of switched mode power supplies have been widely investigated. The main objective ofresearch and development (R&D) in this field is always to find the most suitable control method to be implemented in various DC/DC converter topologies. Inother words, the goal is to select a control method capable of improving the efficiency of the converter, reducing the effect of disturbances (line and load variation), lessening the effect of EMI (electro magnetic interference), and beingless effected by component variation. The main objective of this research work is to study different control methods implemented in switched mode power supplies namely (PID control, hysteresis control, adaptive control, current programmed control, variable structure control (VSC), and sliding mode control (SMC). The advantages and drawbacks of each control method are given. Two control methods, the PID and the SMC are selected and their effects on DC/DC (Buck, Boost, and Buck-Boost) converters are examined. Matlab/SimulinkTM is used to implement PID control method in DC/DC Buck converter and SMC in DC/DC (Buck, and Buck Boost) converters. For the prototype, operational amplifiers (op-amps) are used to implement PID control in DC/DC Buck converter. For SMC op-amps are implemented in DC/DC Buck converter and dSPACETM is used to control the DC/DC Buck-Boost converter. The SMC can be applied to the DC/DC (Buck, Boost, and Buck-Boost) converters. A comparison of the effects of the PID control and the SMC on the DC/DC Buck converter response in steady state, under line variations, load variations, and different component variations is performed. Also the Conducted RF-Emissions between the PID and SMC DC/DC Buck Converter are compared. The thesis shows that, in comparison with the PID control, the SMC provides better steady-state response, better dynamic response, less EMI, inherent order reduction, robustness against system uncertainty disturbances, and an implicit stability proof. Giving a better steady-state and dynamic response, the SMC is implemented in a DC/DC resonant converter. The half-wave zero current switching (HWZCS) DC/DC Buck converter is selected as a converter topology. A general guideline to select the tank component values, needed for the designing of a HWZCS DC/DC Buck, is obtained. The implementation of the SMC to a HWZCS DC/DC Buck converter is analysed. The converter response is investigated in the steady-state region and in the dynamic region.

Customer Research on a Group of European Book Publishers: Trends, Modes of Operation and Decision-Making Processes

Työn päätarkoitus oli tuottaa Stora Enson käyttöön tietoa kirjakustantajista, yhdestä yrityksen asiakassegmentistä. Yritys oli kiinnostunut useista asioista, jotka koskivat asiakkaita ja heidän mielipiteitään. Tarkoitus on, että Stora Enso voi käyttää tutkimuksella koottua tietoa oman toimintansa suunnittelun tukena. Kerätty sekundääritieto esittelee eurooppalaisen kirjakustantamisen nykytilaa ja tulevaisuutta sekä teorioita, jotka tukevat tutkittuja aihealueita. Primääritieto kerättiin henkilökohtaisilla haastatteluilla. Otanta koostui kymmenestä kirjakustantajasta, jotka toimivat Suomessa sekä Stora Enson päämarkkina-alueilla. Tutkimus tarjoaa päivitetyn kuvauksen kirjakustantamisesta. Haastateltavien mielipiteet alan trendeistä olivat yhteneviä yleisen mielipiteen kanssa, eikä suuria mielipide-eroavaisuuksia havaittu. Kustantajien toimintatapoja ja päätöksentekoprosesseja voidaan kuvata monimutkaisiksi, koska useat asiat vaikuttavat kirjan syntyyn ja paperin ostoprosessiin. Lisäksi tutkimus esittelee haastateltavien mielipiteitä paperin merkityksestä heidän liiketoiminnassaan.

Flexible multibody dynamics and intelligent control of a hydraulically driven hybrid redundant robot machine

The assembly and maintenance of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV) is highly challenging since the tasks performed by the robot involve welding, material handling, and machine cutting from inside the VV. The VV is made of stainless steel, which has poor machinability and tends to work harden very rapidly, and all the machining operations need to be carried out from inside of the ITER VV. A general industrial robot cannot be used due to its poor stiffness in the heavy duty machining process, and this will cause many problems, such as poor surface quality, tool damage, low accuracy. Therefore, one of the most suitable options should be a light weight mobile robot which is able to move around inside of the VV and perform different machining tasks by replacing different cutting tools. Reducing the mass of the robot manipulators offers many advantages: reduced material costs, reduced power consumption, the possibility of using smaller actuators, and a higher payload-to-robot weight ratio. Offsetting these advantages, the lighter weight robot is more flexible, which makes it more difficult to control. To achieve good machining surface quality, the tracking of the end effector must be accurate, and an accurate model for a more flexible robot must be constructed. This thesis studies the dynamics and control of a 10 degree-of-freedom (DOF) redundant hybrid robot (4-DOF serial mechanism and 6-DOF 6-UPS hexapod parallel mechanisms) hydraulically driven with flexible rods under the influence of machining forces. Firstly, the flexibility of the bodies is described using the floating frame of reference method (FFRF). A finite element model (FEM) provided the Craig-Bampton (CB) modes needed for the FFRF. A dynamic model of the system of six closed loop mechanisms was assembled using the constrained Lagrange equations and the Lagrange multiplier method. Subsequently, the reaction forces between the parallel and serial parts were used to study the dynamics of the serial robot. A PID control based on position predictions was implemented independently to control the hydraulic cylinders of the robot. Secondly, in machining, to achieve greater end effector trajectory tracking accuracy for surface quality, a robust control of the actuators for the flexible link has to be deduced. This thesis investigates the intelligent control of a hydraulically driven parallel robot part based on the dynamic model and two schemes of intelligent control for a hydraulically driven parallel mechanism based on the dynamic model: (1) a fuzzy-PID self-tuning controller composed of the conventional PID control and with fuzzy logic, and (2) adaptive neuro-fuzzy inference system-PID (ANFIS-PID) self-tuning of the gains of the PID controller, which are implemented independently to control each hydraulic cylinder of the parallel mechanism based on rod length predictions. The serial component of the hybrid robot can be analyzed using the equilibrium of reaction forces at the universal joint connections of the hexa-element. To achieve precise positional control of the end effector for maximum precision machining, the hydraulic cylinder should be controlled to hold the hexa-element. Thirdly, a finite element approach of multibody systems using the Special Euclidean group SE(3) framework is presented for a parallel mechanism with flexible piston rods under the influence of machining forces. The flexibility of the bodies is described using the nonlinear interpolation method with an exponential map. The equations of motion take the form of a differential algebraic equation on a Lie group, which is solved using a Lie group time integration scheme. The method relies on the local description of motions, so that it provides a singularity-free formulation, and no parameterization of the nodal variables needs to be introduced. The flexible slider constraint is formulated using a Lie group and used for modeling a flexible rod sliding inside a cylinder. The dynamic model of the system of six closed loop mechanisms was assembled using Hamilton’s principle and the Lagrange multiplier method. A linearized hydraulic control system based on rod length predictions was implemented independently to control the hydraulic cylinders. Consequently, the results of the simulations demonstrating the behavior of the robot machine are presented for each case study. In conclusion, this thesis studies the dynamic analysis of a special hybrid (serialparallel) robot for the above-mentioned special task involving the ITER and investigates different control algorithms that can significantly improve machining performance. These analyses and results provide valuable insight into the design and control of the parallel robot with flexible rods.

Early modes of exegesis : ideal figures in Malachi as a test case

Antikens judiska bibeltolkare hade ett annorlunda sätt att läsa Bibeln än den som moderna läsare är vana vid. Dessa tidiga exegeter tänkte att texten som nu finns i den hebreiska Bibeln, de kristnas Gamla Testamente, är helig ordagrant i den form som den fanns i under deras tid, att den inte innehåller några fel, och att Gud har en övergripande plan gällande helheten, så att man vid behov kan förklara ett Bibelställe med hjälp av ett annat. Dessa antaganden reflekteras i det sätt på vilket antikens exegeter läste och tolkade sin Bibel. Det här ser man då man läser deras texter, från 400-talet före vår tideräknings början till de första århundradena enligt vår tideräkning. Ett verktyg som antikens skrifttolkare ofta använde var den så kallade gezera shava -metoden, där de jämförde identiska ord och fraser i Bibeln för att skänka belysning åt oklara textställen. Hebreiskan, särskilt den ovokaliserade konsonanttexten, innehåller många homonyma ord, alltså ord som ser likadana ut men har olika betydelser. De tidiga exegeterna utnyttjade ofta de möjligheter till alternativa tolkningar som uppstår ur denna tvetydighet. Ibland kunde de dock tvärtom också dra paralleller ur kontextuella likheter, alltid efter behov. I denna avhandling står dessa tidiga anonyma bibeltolkare och deras tolkningar i fokus. Malakis bok, som härstammar från ca år 475 f.v.t., kan ses som ett viktigt tidigt exempel på denna tendens till nytolkning av traditioner. Boken själv har dock också blivit föremål till nytolkningar, redan i de tilläggsverser som finns i dess slut, men särskilt i senare judisk litteratur och i Nya Testamentet. I avhandlingen granskas de fem bibliska gestalter som nämns i Malaki: Jakob, Esau, Levi, Mose och Elia. Hur används de i boken och hur har senare traditioner som anknyter till dem influerats av Malaki? ------------------------------------------------ Antiikin juutalaiset raamatunselittäjät lukivat Raamattua eri tavoin kuin moderni lukija. Heidän näkemyksensä mukaan se teksti, joka nykyään löytyy heprealaisesta Raamatusta eli kristittyjen Vanhasta testamentista, oli pyhä juuri sellaisessa muodossa, jossa se oli heille välittynyt. Se oli virheetön, ja Jumalalla oli siitä kokonaisnäkemys, joka voisi selvitä myös tulkitsijalle, kun tämä vain tutkisi tekstiä riittävän tarkkaan. Nämä perusoletukset näkyvät tavassa, jolla antiikin eksegeetit lukivat ja tulkitsivat Raamattuaan. Se voidaan huomata heidän jälkeensä jättämistään teksteistä, alkaen noin 400-luvulta ennen ajanlaskumme alkua ja jatkuen ajanlaskumme ensimmäisiin vuosisatoihin. Antiikin raamatunselittäjät käyttivät yleisesti muun muassa metodia, joka rabbiinisessa kirjallisuudessa tunnetaan nimellä gezera shava. Raamatussa kahdessa tai useammassa kohtaa esiintyviä samoja sanoja ja ilmauksia verrattiin tällöin toisiinsa ja pyrittiin siten saamaan valaistusta epäselvinä pidettyihin tekstinkohtiin. Heprealle, etenkin sen vokalisoimattomassa muodossa, on tyypillistä homonyymisyys. Samannäköiset sanat voivat eri yhteyksissä tarkoittaa eri asioita. Varhaiset eksegeetit päätyivät usein tästä ilmiöstä nouseviin, keskenään vaihtoehtoisiin tulkintoihin. Toisaalta he saattoivat myös tarvittaessa selittää tekstinkohtaa toisella tekstinkohdalla ainoastaan näiden sisällöllisenkin yhtäläisyyden perusteella. Tässä väitöstutkimuksessa tarkastellaan näitä varhaisia, meille nimettömiksi jääneitä raamatunselittäjiä ja heidän tulkintojaan käyttämällä tutkimuksen lähtökohtana Malakian kirjaa. Malakiaa, joka on peräisin noin vuodelta 475 ennen ajanlaskumme alkua, voidaan pitää yhtenä tärkeimmistä ja varhaisimmista teksteistä, joissa traditioita yhdistellään ja kerrotaan uudelleen edellä mainittuihin perusajatuksiin nojaten ja niihin pohjautuvia menetelmiä käyttäen. Toisaalta Malakian kirjaa on myös tulkittu samojen periaatteiden mukaisesti jo sen myöhemmältä ajalta peräisin olevissa loppujakeissa, ja sittemmin muussa varhaisessa juutalaisessa kirjallisuudessa sekä Uudessa testamentissa. Väitöstutkimuksessa tarkastellaan erityisesti niitä viittä henkilöä, jotka mainitaan Malakian kirjassa: Jaakobia, Esauta, Leeviä, Moosesta ja Eliaa. Kirjoittaja tutkii, miten heidän hahmojaan on käytetty Malakian kirjassa, millaisiin heitä koskeviin traditioihin tämä käyttötapa perustuu, ja missä määrin Malakian kirjan vaikutus on havaittavissa myöhemmässä näihin henkilöihin liitetyssä perinteessä.

Entry Modes for Finnish Firms into the Zambian Renewable Energy Industry

The renewable energy industry in Zambia is poised for growth and offers many possibilities for Finnish firms willing to enter the market. The Zambian government’s deliberate policy measures aim at attracting foreign direct investment (FDI) into this sector. This study rationalises that this could be the pull factor for Finnish firms. The thesis gives an overview of the industry and investigates an appropriate mode of entry, basing its arguments on the comparison analysis of the two economies with the use of the world forum’s stages of economic development as a framework. The theoretical part of the study examines internationalisation theories, entry mode choice and factors influencing the choice. The multiple case study approach is implored, analysing four case companies from Finland with the use of extant literature on internationalisation relevant to the study. The research design involves the use of documentation, secondary data, interviews and observation. The results of the case analyses show that the Finnish firm’s most preferred entry mode initially is exporting because it is considered to be less risky. Additionally, the findings also reveal that the selection of a suitable mode of entry is dependent on the firms’ size, orientation and international experience and could therefore be considered to be subjective. Paramount is the act of gaining market knowledge. The study shows that only hydro-electrical, solar energies and biomass are by far the most used and known forms of renewable energy in Zambia, while other alternative sources still remain un-exploited thus highlighting a growth potential. However, policy formulation and the regulatory framework in the renewable energy sector were found to be wanting.

Defining the keyhole modes – the effects on the weld geometry and the molten pool behaviour in high power laser welding of stainless steels

Keyhole welding, meaning that the laser beam forms a vapour cavity inside the steel, is one of the two types of laser welding processes and currently it is used in few industrial applications. Modern high power solid state lasers are becoming more used generally, but not all process fundamentals and phenomena of the process are well known and understanding of these helps to improve quality of final products. This study concentrates on the process fundamentals and the behaviour of the keyhole welding process by the means of real time high speed x-ray videography. One of the problem areas in laser welding has been mixing of the filler wire into the weld; the phenomena are explained and also one possible solution for this problem is presented in this study. The argument of this thesis is that the keyhole laser welding process has three keyhole modes that behave differently. These modes are trap, cylinder and kaleidoscope. Two of these have sub-modes, in which the keyhole behaves similarly but the molten pool changes behaviour and geometry of the resulting weld is different. X-ray videography was used to visualize the actual keyhole side view profile during the welding process. Several methods were applied to analyse and compile high speed x-ray video data to achieve a clearer image of the keyhole side view. Averaging was used to measure the keyhole side view outline, which was used to reconstruct a 3D-model of the actual keyhole. This 3D-model was taken as basis for calculation of the vapour volume inside of the keyhole for each laser parameter combination and joint geometry. Four different joint geometries were tested, partial penetration bead on plate and I-butt joint and full penetration bead on plate and I-butt joint. The comparison was performed with selected pairs and also compared all combinations together.

Entry Modes of Finnish Food Enterprises in Chinese Market

China’s phenomenal economic growth and social development have brought along interesting opportunities for Finnish companies. One intriguing sector offering significant growth potential is the food industry. Due to the local food safety issues, rising disposable income level and changing consumer habits, the demand for foreign food is increasing. Finnish food companies have much to offer in terms of high quality, food safety in production, technological development and innovation. The purpose of this study is to examine how the Finnish food enterprises choose their entry modes in the Chinese market. This study increases understanding of entry modes the Finnish companies can use to successfully enter the unpredictable market of China in the food industry context. The study examines the industry specific challenges and the possible solutions to them. Qualitative research is selected as research methodology for this study because the intention is to understand the reasons behind the Finnish food enterprises’ entry mode choices in the Chinese market. The study is conducted as a qualitative case analysis. Six Finnish case companies operating in the food industry were interviewed. The results of the research indicate that most of the food industry companies use exporting as their entry mode to China; only one case company used an investment mode. This study illustrates the significance of the factors related to company’s background, mode concerns and Chinese market influences in the entry mode choice.

Failure modes of passive decay heat removing safety systems of modern nuclear power plants

The purpose of this master’s thesis is to gain an understanding of passive safety systems’ role in modern nuclear reactors projects and to research the failure modes of passive decay heat removal safety systems which use phenomenon of natural circulation. Another purpose is to identify the main physical principles and phenomena which are used to establish passive safety tools in nuclear power plants. The work describes passive decay heat removal systems used in AES-2006 project and focuses on the behavior of SPOT PG system. The descriptions of the main large-scale research facilities of the passive safety systems of the AES-2006 power plant are also included. The work contains the calculations of the SPOT PG system, which was modeled with thermal-hydraulic system code TRACE. The dimensions of the calculation model are set according to the dimensions of the real SPOT PG system. In these calculations three parameters are investigated as a function of decay heat power: the pressure of the system, the natural circulation mass flow rate around the closed loop, and the level of liquid in the downcomer. The purpose of the calculations is to test the ability of the SPOT PG system to remove the decay heat from the primary side of the nuclear reactor in case of failure of one, two, or three loops out of four. The calculations show that three loops of the SPOT PG system have adequate capacity to provide the necessary level of safety. In conclusion, the work supports the view that passive systems could be widely spread in modern nuclear projects.