Food packaging indicators and sensors

Various categories of food packaging indicators namely; VTT, Ageless Eye, Mocon, Åbo Akademi and Impak were selected and incorporated into food trays manufactured at LUT packaging laboratory. Each of these food packaging indicators was used to investigate (visually and qualitatively) the transmission of oxygen through the seal, and tray material, as well as to detect microbial activity within the content of the package. Applications of different methods of gas flushing, content variation and introduction of two distinct levels of oxygen scavengers were employed as treatments to evaluate the packaging performance of the food packaging indicators. Ease of handling of each food packaging indicator was also taken into considerations. Findings showed that for packages, which contained chicken product, the amount of oxygen in the package, measured immediately after the sealing operation on the first day gradually decreased to zero percent by the third day of the storage period. The oxygen level remained at this point throughout the duration of storage for the chicken packages. Besides, level of oxygen in the packages without product continued to increase with the storage time, at moderate rate of 0.1% for 100%N2 and 0.3% for 30%CO2/70%N2 empty packages. More carbon dioxide gas was recorded for packages flushed with 30%CO2/70%N2. Results also revealed that visual analysis of one of the color indicators for example Ageless Eye, conformed to the data derived from the luminescence food-packaging indicator. This shows that packaging operation of the packaging line was considerably stable, and efficient with negligible exception. However, it was found that most of the food packaging indicators investigated in this research study exhibited considerable packaging challenges, such as, reaction with the content of the package (Impak); over sensitivity (Åbo Akademi and Impak); ease of handling problem (Åbo Akademi); and ease of activation problem (VTT indicators). In this study, the strengths and limitations of different indicators were analyzed. This study demonstrates the applicability of various indicators in MAP using chicken package application.

Rankapuun ja -hakkeen laadun vaihtelu terminaalivarastoinnissa

Työssä tutkittiin polttoaineterminaalissa varastoitavan puupolttoaineen laadunmuutoksia. Tutkimuksessa tarkasteltiin hakettamattomien rankapuiden ja rankapuuhakkeen kosteuden ja lämpöarvon muutosta. Myös kuiva-ainetappiota tutkittiin aikaisempien tutkimusten perusteella. Tutkimusaineisto kerättiin Etelä-Savon Energian polttoaineterminaaleista. Kosteus-pitoisuuksia mitattiin Hydromette M2050 -pikakosteusmittarilla ja uunikuivaus-menetelmällä standardin SFS-EN 14774 mukaisesti. Tutkimuksessa huomattiin pikakosteusmittarin toimivan riittävän luotettavalla tasolla rankapuiden mittauksissa, mutta hakkeen mittauksissa mittari osoittautui toimimattomaksi. Varastointiaika ei vaikuttanut polttoaineiden lämpöarvoihin, mutta kosteuspitoisuus vaihteli suuresti. Tutkimustuloksista pääteltiin rangan kuivuvan terminaalivarastossa ja hakkeen kosteuden pysyvän vakiona. Energiasisällön puolesta rankapuuta voidaan varastoida yli 2 vuotta, mutta hakkeen varastointiaika tulisi pitää mahdollisimman lyhyenä.

Hakkuutähteen arvoketjun analysointi ja kannattavuuden tehostaminen

Suomen tavoitteena on nostaa metsähakkeen käyttö 25 TWh:iin vuoteen 2020 mennessä. Tavoitteen saavuttaminen edellyttää, että metsähakkeen käyttö ja tuotanto on kannatta-vuudeltaan houkuttelevaa. Suuri osa Suomen energiapuusta saadaan ainespuun hakkuun yhteydessä kerättävistä hakkuutähteistä, josta valmistetaan haketta lämpölaitosten tarpee-seen. Tämän työn tavoitteena oli tarkastella suomalaisen metsäteollisuusyrityksen metsähak-keen tuottamiseen liittyvää arvoketjua ja löytää sieltä ne prosessin osat, joissa arvoa syn-tyy eniten sekä ne prosessin osat, joissa arvoa mahdollisesti menetetään. Arvoketjun tarkastelun lisäksi työn tavoitteena oli selvittää mahdollisuuksia latvusmassa-hakkeen kannattavuuden parantamiseen case yrityksessä. Arvoketju analyysiin perustuen tutkimuksessa voitiin todeta suurimman metsäenergian arvon syntyvän hakkuutähteen kuivumisen seurauksena. Liian pitkä varastointiaika sitä vastoin aiheuttaa kuiva-ainetappiosta johtuvaa arvon menetystä hankintaketjussa. Suurin vaikutus hakkuutähdehakkeen kannattavuuteen on hakkeen alhaisella kosteudella. Tutkimuksessa todettiin lisäksi kaukokuljetuskustannusten vaikuttavan erityisen suuresti haketuotannon kannattavuuteen.

Effect of harvest time on storage loss and sprouting in onion

Selostus: Sadonkorjuuajan vaikutus sipulin varastohävikkiin ja varastoinnin jälkeiseen versomiseen

Modeling and Simulation ofReal-Time System as a Tool to Improve Capacity Management - Case Fenix

Tämän tutkimustyön kohteena on TietoEnator Oy:n kehittämän Fenix-tietojärjestelmän kapasiteettitarpeen ennustaminen. Työn tavoitteena on tutustua Fenix-järjestelmän eri osa-alueisiin, löytää tapa eritellä ja mallintaa eri osa-alueiden vaikutus järjestelmän kuormitukseen ja selvittää alustavasti mitkä parametrit vaikuttavat kyseisten osa-alueiden luomaan kuormitukseen. Osa tätä työtä on tutkia eri vaihtoehtoja simuloinnille ja selvittää eri vaihtoehtojen soveltuvuus monimutkaisten järjestelmien mallintamiseen. Kerätyn tiedon pohjaltaluodaan järjestelmäntietovaraston kuormitusta kuvaava simulaatiomalli. Hyödyntämällä mallista saatua tietoa ja tuotantojärjestelmästä mitattua tietoa mallia kehitetään vastaamaan yhä lähemmin todellisen järjestelmän toimintaa. Mallista tarkastellaan esimerkiksi simuloitua järjestelmäkuormaa ja jonojen käyttäytymistä. Tuotantojärjestelmästä mitataan eri kuormalähteiden käytösmuutoksia esimerkiksi käyttäjämäärän ja kellonajan suhteessa. Tämän työn tulosten on tarkoitus toimia pohjana myöhemmin tehtävälle jatkotutkimukselle, jossa osa-alueiden parametrisointia tarkennetaan lisää, mallin kykyä kuvata todellista järjestelmää tehostetaanja mallin laajuutta kasvatetaan.

On Distributed Storage Codes

Distributed storage systems are studied. The interest in such system has become relatively wide due to the increasing amount of information needed to be stored in data centers or different kinds of cloud systems. There are many kinds of solutions for storing the information into distributed devices regarding the needs of the system designer. This thesis studies the questions of designing such storage systems and also fundamental limits of such systems. Namely, the subjects of interest of this thesis include heterogeneous distributed storage systems, distributed storage systems with the exact repair property, and locally repairable codes. For distributed storage systems with either functional or exact repair, capacity results are proved. In the case of locally repairable codes, the minimum distance is studied. Constructions for exact-repairing codes between minimum bandwidth regeneration (MBR) and minimum storage regeneration (MSR) points are given. These codes exceed the time-sharing line of the extremal points in many cases. Other properties of exact-regenerating codes are also studied. For the heterogeneous setup, the main result is that the capacity of such systems is always smaller than or equal to the capacity of a homogeneous system with symmetric repair with average node size and average repair bandwidth. A randomized construction for a locally repairable code with good minimum distance is given. It is shown that a random linear code of certain natural type has a good minimum distance with high probability. Other properties of locally repairable codes are also studied.

Integrated energy storage tank for large scale power-to-gas applications

The global interest towards renewable energy production such as wind and solar energy is increasing, which in turn calls for new energy storage concepts due to the larger share of intermittent energy production. Power-to-gas solutions can be utilized to convert surplus electricity to chemical energy which can be stored for extended periods of time. The energy storage concept explored in this thesis is an integrated energy storage tank connected to an oxy-fuel combustion plant. Using this approach, flue gases from the plant could be fed directly into the storage tank and later converted into synthetic natural gas by utilizing electrolysis-methanation route. This work utilizes computational fluid dynamics to model the desublimation of carbon dioxide inside a storage tank containing cryogenic liquid, such as liquefied natural gas. Numerical modelling enables the evaluation of the transient flow patterns caused by the desublimation, as well as general fluid behaviour inside the tank. Based on simulations the stability of the cryogenic storage and the magnitude of the key parameters can be evaluated.

Dynamic model development of adiabatic compressed air energy storage

The share of variable renewable energy in electricity generation has seen exponential growth during the recent decades, and due to the heightened pursuit of environmental targets, the trend is to continue with increased pace. The two most important resources, wind and insolation both bear the burden of intermittency, creating a need for regulation and posing a threat to grid stability. One possibility to deal with the imbalance between demand and generation is to store electricity temporarily, which was addressed in this thesis by implementing a dynamic model of adiabatic compressed air energy storage (CAES) with Apros dynamic simulation software. Based on literature review, the existing models due to their simplifications were found insufficient for studying transient situations, and despite of its importance, the investigation of part load operation has not yet been possible with satisfactory precision. As a key result of the thesis, the cycle efficiency at design point was simulated to be 58.7%, which correlated well with literature information, and was validated through analytical calculations. The performance at part load was validated against models shown in literature, showing good correlation. By introducing wind resource and electricity demand data to the model, grid operation of CAES was studied. In order to enable the dynamic operation, start-up and shutdown sequences were approximated in dynamic environment, as far as is known, the first time, and a user component for compressor variable guide vanes (VGV) was implemented. Even in the current state, the modularly designed model offers a framework for numerous studies. The validity of the model is limited by the accuracy of VGV correlations at part load, and in addition the implementation of heat losses to the thermal energy storage is necessary to enable longer simulations. More extended use of forecasts is one of the important targets of development, if the system operation is to be optimised in future.