RADAR Roadmap: The application of EPrints for the continued development of RADAR at The Glasgow School of Art

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Radar cross-section measurement using the Doppler effect

In this Master Thesis we discuss issues related to the measurement of the effective scattering surface, based on the Doppler Effect. Modeling of the detected signal was made. Narrowband signal filtering using low-frequency amplifier was observed. Parameters of the proposed horn antennas were studied; radar cross section charts for three different objects were received.

Aircraft tracking and classification with vhf passive bistatic radar

Since the times preceding the Second World War the subject of aircraft tracking has been a core interest to both military and non-military aviation. During subsequent years both technology and configuration of the radars allowed the users to deploy it in numerous fields, such as over-the-horizon radar, ballistic missile early warning systems or forward scatter fences. The latter one was arranged in a bistatic configuration. The bistatic radar has continuously re-emerged over the last eighty years for its intriguing capabilities and challenging configuration and formulation. The bistatic radar arrangement is used as the basis of all the analyzes presented in this work. The aircraft tracking method of VHF Doppler-only information, developed in the first part of this study, is solely based on Doppler frequency readings in relation to time instances of their appearance. The corresponding inverse problem is solved by utilising a multistatic radar scenario with two receivers and one transmitter and using their frequency readings as a base for aircraft trajectory estimation. The quality of the resulting trajectory is then compared with ground-truth information based on ADS-B data. The second part of the study deals with the developement of a method for instantaneous Doppler curve extraction from within a VHF time-frequency representation of the transmitted signal, with a three receivers and one transmitter configuration, based on a priori knowledge of the probability density function of the first order derivative of the Doppler shift, and on a system of blocks for identifying, classifying and predicting the Doppler signal. The extraction capabilities of this set-up are tested with a recorded TV signal and simulated synthetic spectrograms. Further analyzes are devoted to more comprehensive testing of the capabilities of the extraction method. Besides testing the method, the classification of aircraft is performed on the extracted Bistatic Radar Cross Section profiles and the correlation between them for different types of aircraft. In order to properly estimate the profiles, the ADS-B aircraft location information is adjusted based on extracted Doppler frequency and then used for Bistatic Radar Cross Section estimation. The classification is based on seven types of aircraft grouped by their size into three classes.

Metal surface and subsurface inspection using nondestructive optical methods

This thesis considers nondestructive optical methods for metal surface and subsurface inspection. The main purpose of this thesis was to study some optical methods in order to find out their applicability to industrial measurements. In laboratory testing the simplest light scattering approach, measurement of specular reflectance, was used for surface roughness evaluation. Surface roughness, curvature and finishing process of metal sheets were determined by specular reflectance measurements. Using a fixed angleof incidence, the specular reflectance method might be automated for industrialinspection. For defect detection holographic interferometry and thermography were compared. Using either holographic interferometry or thermography, relativelysmall-size defects in metal plates could be revealed. Holographic techniques have some limitations for industrial measurements. On the contrary, thermography has excellent prospects for on-line inspection, especially with scanning techniques.

Päätöspuun käyttö tutkamaalien initialisoinnissa

Suomen ilmatilaa valvotaan reaaliaikaisesti, pääasiassa ilmavalvontatutkilla. Ilmatilassa on lentokoneiden lisäksi paljon muitakin kohteita, jotka tutka havaitsee. Tutka lähettää nämä tiedot edelleen ilmavalvontajärjestelmään. Ilmavalvontajärjestelmä käsittelee tiedot, sekä lähettää ne edelleen esitysjärjestelmään. Esitysjärjestelmässä tiedot esitetään synteettisinä merkkeinä, seurantoina joista käytetään nimitystä träkki. Näiden tietojen puitteissa sekä oman ammattitaitonsa perusteella ihmiset tekevät päätöksiä. Tämän työn tarkoituksena on tutkia tutkan havaintoja träkkien initialisointipisteessä siten, että voitaisiin määritellä tyypillinen rakenne sille mikä on oikea ja mikä väärä tai huono träkki. Tämän lisäksi tulisi ennustaa, mitkä Irakeista eivät aiheudu ilma- aluksista. Saadut tulokset voivat helpottaa työtä havaintojen tulkinnassa - jokainen lintuparvi ei ole ehdokas seurannaksi. Havaintojen luokittelu voidaan tehdä joko neurolaskennalla tai päätöspuulla. Neurolaskenta tehdään neuroverkoilla, jotka koostuvat neuroneista. Päätöspuu- luokittelijat ovat oppivia tietorakenteita kuten neuroverkotkin. Yleisin päätöpuu on binääripuu. Tämän työn tavoitteena on opettaa päätöspuuluokittelija havaintojen avulla siten, että se pystyy luokittelemaan väärät havainnot oikeista. Neurolaskennan mahdollisuuksia tässä työssä ei käsitellä kuin teoreettisesti. Työn tuloksena voi todeta, että päätöspuuluokittelijat ovat erittäin kykeneviä erottamaan oikeat havainnot vääristä. Vaikka tulokset olivat rohkaiseva, lisää tutkimusta tarvitaan määrittelemään luotettavammin tekijät, jotka parhaiten suorittavat luokittelun.

Proportionality and Party Success in Europe

This thesis consists of four articles and an introductory section. The main research questions in all the articles are about proportionality and party success in Europe, at European, national or district levels. Proportionality in this thesis denotes the proximity of seat shares parties receive compared to their respective vote shares, after the electoral system’s allocation process. This proportionality can be measured through numerous indices that illustrate either the overall proportionality of an electoral system or a particular election. The correspondence of a single party’s seat shares to its vote shares can also be measured. The overall proportionality is essential in three of the articles (1, 2 and 4), where the system’s performance is studied by means of plots. In article 3, minority party success is measured by advantage-ratios that reveal single party’s winnings or losses in the votes to seat allocation process. The first article asks how proportional are the European parliamentary (EP) electoral systems, how do they compare with results gained from earlier studies and how do the EP electoral systems treat different sized parties. The reasons for different outcomes are looked for in explanations given by traditional electoral studies i.e. electoral system variables. The countries studied (EU15) apply electoral systems that vary in many important aspects, even though a certain amount of uniformity has been aspired to for decades. Since the electoral systems of the EP elections closely resemble the national elections, the same kinds of profiles emerge as in the national elections. The electoral systems indeed treat the parties differentially and six different profile types can be found. The counting method seems to somewhat determine the profile group, but the strongest variables determining the shape of a countries’ profile appears to be the average district magnitude and number of seats allocated to each country. The second article also focuses on overall proportionality performance of an electoral system, but here the focus is on the impact of electoral system changes. I have developed a new method of visualizing some previously used indices and some new indices for this purpose. The aim is to draw a comparable picture of these electoral systems’ changes and their effects. The cases, which illustrate this method, are four elections systems, where a change has occurred in one of the system variables, while the rest remained unchanged. The studied cases include the French, Greek and British European parliamentary systems and the Swedish national parliamentary system. The changed variables are electoral type (plurality changed to PR in the UK), magnitude (France splitting the nationwide district into eight smaller districts), legal threshold (Greece introducing a three percent threshold) and counting method (d’Hondt was changed to modified Sainte-Laguë in Sweden). The radar plots from elections after and before the changes are drawn for all country cases. When quantifying the change, the change in the plots area that is created has also been calculated. Using these radar plots we can observe that the change in electoral system type, magnitude, and also to some extent legal threshold had an effect on overall proportionality and accessibility for small parties, while the change between the two highest averages counting method had none. The third article studies the success minority parties have had in nine electoral systems in European heterogeneous countries. This article aims to add more motivation as to why we should care how different sized parties are treated by the electoral systems. Since many of the parties that aspire to represent minorities in European countries are small, the possibilities for small parties are highlighted. The theory of consociational (or power-sharing) democracy suggests that, in heterogeneous societies, a proportional electoral system will provide the fairest treatment of minority parties. The OSCE Lund Recommendations propose a number of electoral system features, which would improve minority representation. In this article some party variables, namely the unity of the minority parties and the geographical concentration of the minorities were included among possible explanations. The conclusions are that the central points affecting minority success were indeed these non-electoral system variables rather than the electoral system itself. Moreover, the size of the party was a major factor governing success in all the systems investigated; large parties benefited in all the studied electoral systems. In the fourth article the proportionality profiles are again applied, but this time to district level results in Finnish parliamentary elections. The level of proportionality distortion is also studied by way of indices. The average magnitudes during the studied periodrange from 7.5 to 26.2 in the Finnish electoral districts and this opens up unequal opportunities for parties in different districts and affects the shape of the profiles. The intra-country case allows the focus to be placed on the effect of district magnitude, since all other electoral systems are kept constant in an intra-country study. The time span in the study is from 1962 to 2007, i.e. the time that the districts have largely been the same geographically. The plots and indices tell the same story, district magnitude and electoral alliances matter. The district magnitude is connected to the overall proportionality of the electoral districts according to both indices, and the profiles are, as expected, also closer to perfect proportionality in large districts. Alliances have helped some small parties to gain a much higher seat share than their respective vote share and these successes affect some of the profiles. The profiles also show a consistent pattern of benefits for the small parties who ally with the larger parties.

Sadevälkkeen mallinnus ilmavalvontatutkajärjestelmää varten

Tutkat muodostavat Suomen rauhanajan ilmavalvonnan rungon. Ilmatilassa on lentokoneiden lisäksi paljon muitakin kohteita, jotka ilmavalvontatutka havaitsee. Naita ei toivottuja kaikuja kutsutaan välkkeeksi. Sadevälke on tilavuusvälkettä. Tämän työn tarkoituksena on löytää menetelmä tai malli, jolla voitaisiin mallintaa sadevälkkeen vaikutus ilmavalvontatutkassa. Toisaalta myös sadevälkkeen suodatus on työn keskeinen tavoite. Käytettyjä suodatusmenetelmiä olivat adaptiivinen suodatus ja doppler-suodatus. Suodinpankkiin eli doppler-suodatukseen lisättiin vielä CFAR Työn tuloksena voi todeta, että sadevälkkeen suodatus onnistui hyvin mutta itse sadevälkkeen mallintamista tulee kehittää edelleen. Työssä käytetyt menetelmät on esitetty algoritmimuodossa. Mittausaineiston keräys suoritettiin keskivalvontatutkalla ja SP-testerillä. Varsinaiset suodatuskokeet ja mallin testaus tehtiin Matlab-ohjelmistolla.

Multifrequency VLBI Observations of Selected Active Galactic Nuclei

In this dissertation, active galactic nuclei (AGN) are discussed, as they are seen with the high-resolution radio-astronomical technique called Very Long Baseline Interferometry (VLBI). This observational technique provides very high angular resolution (_ 10−300 = 1 milliarcsecond). VLBI observations, performed at different radio frequencies (multi-frequency VLBI), allow to penetrate deep into the core of an AGN to reveal an otherwise obscured inner part of the jet and the vicinity of the AGN’s central engine. Multi-frequency VLBI data are used to scrutinize the structure and evolution of the jet, as well as the distribution of the polarized emission. These data can help to derive the properties of the plasma and the magnetic field, and to provide constraints to the jet composition and the parameters of emission mechanisms. Also VLBI data can be used for testing the possible physical processes in the jet by comparing observational results with results of numerical simulations. The work presented in this thesis contributes to different aspects of AGN physics studies, as well as to the methodology of VLBI data reduction. In particular, Paper I reports evidence of optical and radio emission of AGN coming from the same region in the inner jet. This result was obtained via simultaneous observations of linear polarization in the optical and in radio using VLBI technique of a sample of AGN. Papers II and III describe, in detail, the jet kinematics of the blazar 0716+714, based on multi-frequency data, and reveal a peculiar kinematic pattern: plasma in the inner jet appears to move substantially faster that that in the large-scale jet. This peculiarity is explained by the jet bending, in Paper III. Also, Paper III presents a test of the new imaging technique for VLBI data, the Generalized Maximum Entropy Method (GMEM), with the observed (not simulated) data and compares its results with the conventional imaging. Papers IV and V report the results of observations of the circularly polarized (CP) emission in AGN at small spatial scales. In particular, Paper IV presents values of the core CP for 41 AGN at 15, 22 and 43 GHz, obtained with the help of the standard Gain transfer (GT) method, which was previously developed by D. Homan and J.Wardle for the calibration of multi-source VLBI observations. This method was developed for long multi-source observations, when many AGN are observed in a single VLBI run. In contrast, in Paper V, an attempt is made to apply the GT method to single-source VLBI observations. In such observations, the object list would include only a few sources: a target source and two or three calibrators, and it lasts much shorter than the multi-source experiment. For the CP calibration of a single-source observation, it is necessary to have a source with zero or known CP as one of the calibrators. If the archival observations included such a source to the list of calibrators, the GT could also be used for the archival data, increasing a list of known AGN with the CP at small spatial scale. Paper V contains also calculation of contributions of different sourced of errors to the uncertainty of the final result, and presents the first results for the blazar 0716+714.

SAR-satelliittien hyödyntäminen merivalvonnassa

Yhteiskunnan eri toimijoiden riippuvuus avaruustoiminnasta on kasvamassa. Satelliittien paikka- ja aikatietojen lisäksi satelliittien valvontakyvyn hyödyntäminen on lisääntymässä. Merivoimat on mukana kansainvälisissä merivalvontahankkeissa, muun muassa Euroopan puolustusviraston johtamassa Maritime Surveillance -hankkeessa, jossa hyödynnetään satelliittien valvontakykyä merialueiden valvonnassa. Tämä tutkimuksen tavoitteena on selvittää miten SAR (Synthetic Aperature Radar) -satelliitteja voidaan hyödyntää merivalvonnassa ja mitkä ovat merivalvonnan tietotarpeet sekä SAR-aineistojen saatavuus.

Länsimaisten SAR/GMTI-tutkien suorituskyky

SAR/GMTI-tutka (Synthetic Aperture Radar/Ground Moving Target Indicator) tuottaa tiedustelutietoa johtamisen, tiedustelun, valvonnan ja maalinosoituksen tueksi. SAR/GMTI -tutka on luotettava tiedusteluväline tutkataajuusalueella tapahtuvan tiedustelutiedon tuottamisen ansiosta, jolloin tutkan käyttö ja tiedustelutiedon tuottaminen onnistuvat huonoissakin sääolosuhteissa. SAR/GMTI-tutkien käyttö on yleistynyt sotilaskäytössä viimeisen kahdenkymmenen vuoden aikana ja niillä on ollut suuri merkitys kaikissa suuremmissa konflikteissa kylmän sodan loppumisen jälkeen. SAR-tutka käyttää lavettina liikkuvaa alustaa, useimmiten lentokonetta, muodostaakseen virtuaalisen antenniryhmän ja signaaliprosessoinnin avulla, jolloin vastaanottimeen palautuvat kaiut sijoitetaan kohdilleen ja muodostetaan SAR-kuvaa. Tarkimmillaan nykyisten SARtutkien resoluutio on muutaman kymmenen senttimetrin luokkaa ja mittausetäisyydet suurimmillaan satoja kilometrejä. GMTI-tutka havaitsee liikkuvat kohteet, kun liikkuvista kohteista palautuvat kaiuilla on eri taajuus kuin ympäröivästä maastosta palautuvilla kaiuilla ja kohteet pystytään erottelemaan välkkeen seasta. GMTI-tutkan toiminta perustuu doppler-ilmiöön. SAR-tutkaa pystytään useimmiten käyttämään GMTI-moodissa. Sotilaskäytössä olevat GMTI-tutkat pystyvät havaitsemaan keskimäärin noin henkilöauton kokoisen maalin, joka liikkuu noin 5 km/h nopeudella. SAR/GMTI-tutkia on käytetty menestyksellisesti molemmissa Irakin sodissa Yhdysvaltojen toimesta, kun tasainen aavikko ei aiheuttanut juurikaan ongelmia alueen valvontaan ilmasta käsin. Sen sijaan haasteita SAR/GMTI-tutkille ovat aiheuttaneet operaatiot Balkanilla ja Afganistanissa korkean vuoriston, peitteisen maaston ja kohteiden hankalan tunnistettavuuden takia. Suoraan taistelun tukemiseen liittyen GMTI-tutkat ovat olleet hyödyllisiä, kun valvontakoneilta saadut tiedot liikkuvista vihollisosastoista on voitu lähettää datalinkkien kautta lähestulkoon reaaliajassa. SAR-tutkat ovat olleet hyödyllisiä ennen taisteluiden alkua tiedustelutiedon keräämisessä ja vaikeakulkuisessa maastossa SAR-tutkia on käytetty esimerkiksi taisteluvaikutuksen jälkiarviointiin. SAR/GMTI-tutkien suorituskyky kehittyy jatkuvasti laitteiden resoluution ja koon pienentyessä. Datalinkeillä voidaan välittää tietoa alajohtoportaille ja SAR/GMTI-tutkia on voitu sijoittaa esimerkiksi UAV-lennokkeihin (Unmanned Aerial Vehicle), joilla on voitu suorittaa tarkempaa aluevalvontaa kuin mitä isomman kokoluokan valvontakoneilla voitaisiin toteuttaa.

Key factors in U.S. Government support of business internationalization in Finland Case: U.S. Embassy in Helsinki

This study discusses the importance of government intervention for companies and the expansion of national innovation systems. The purpose of the study is to examine the impact which the U.S. Embassy in Helsinki can have on Finnish businesses through their business support programs and events. The embassy has shifted focus in recent years with the creation of an innovation center and increased business services. The study has sub-objectives to discover the critical factors for producing impact, host and home based factor interaction, and effects produced by these initiatives. The theoretical background of the study consists of literature relating to the concepts of national innovation systems and government intervention. The empirical research conduct for this study is based on interviews with experts from the environment surrounding the U.S. Embassy in Helsinki, Finland and participation in embassy events. The data was collected between March 2014 and September 2015. Seven interviews were conducted; five with representatives of the U.S. Embassy and two with related organizations. Thematic analysis was used to categorize and interpret interview and observation data. The use of an impact radar was implemented as a basis for analysis. This study finds that the internationalization of national innovation systems provides interesting opportunities and challenges for national governments. The opportunity to provide services to foreign companies by an embassy in a stable environment opens the possibility to create positive notice and relations with the host country. The increased connections and inputs to the national innovation system of the home country have the potential to increase knowledge absorption and create positive growth. The most effective way for governments to encourage businesses is to create incentives and reduce barriers. The services are best aimed at small to medium sized companies in the early stages of development. The findings of this report suggest that the most critical factors for producing impact on companies are the ability to disseminate information effectively, the ability to create a positive image of the country, the ability to foster effective networks between the two countries, and the ability to facilitate the internationalization of companies. In the best cases, the embassy is able to create incentives to internationalize to the United States and reduce barriers which are encountered by companies. Future research is necessary to fully understand the impact of business services provided by an embassy can have on the political and economic relations of countries, and on particular industry sectors. The institutional setting provided by the embassy’s focus on business relations provides a rich environment for further study in a number of areas.