Experimental thermal hydraulic studies on the enhancement of safety of LWRs

The safe use of nuclear power plants (NPPs) requires a deep understanding of the functioning of physical processes and systems involved. Studies on thermal hydraulics have been carried out in various separate effects and integral test facilities at Lappeenranta University of Technology (LUT) either to ensure the functioning of safety systems of light water reactors (LWR) or to produce validation data for the computer codes used in safety analyses of NPPs. Several examples of safety studies on thermal hydraulics of the nuclear power plants are discussed. Studies are related to the physical phenomena existing in different processes in NPPs, such as rewetting of the fuel rods, emergency core cooling (ECC), natural circulation, small break loss-of-coolant accidents (SBLOCA), non-condensable gas release and transport, and passive safety systems. Studies on both VVER and advanced light water reactor (ALWR) systems are included. The set of cases include separate effects tests for understanding and modeling a single physical phenomenon, separate effects tests to study the behavior of a NPP component or a single system, and integral tests to study the behavior of the whole system. In the studies following steps can be found, not necessarily in the same study. Experimental studies as such have provided solutions to existing design problems. Experimental data have been created to validate a single model in a computer code. Validated models are used in various transient analyses of scaled facilities or NPPs. Integral test data are used to validate the computer codes as whole, to see how the implemented models work together in a code. In the final stage test results from the facilities are transferred to the NPP scale using computer codes. Some of the experiments have confirmed the expected behavior of the system or procedure to be studied; in some experiments there have been certain unexpected phenomena that have caused changes to the original design to avoid the recognized problems. This is the main motivation for experimental studies on thermal hydraulics of the NPP safety systems. Naturally the behavior of the new system designs have to be checked with experiments, but also the existing designs, if they are applied in the conditions that differ from what they were originally designed for. New procedures for existing reactors and new safety related systems have been developed for new nuclear power plant concepts. New experiments have been continuously needed.

An Image Enhancement Technique using MTF of Human eye

Image filtering is a highly demanded approach of image enhancement in digital imaging systems design. It is widely used in television and camera design technologies to improve the quality of an output image to avoid various problems such as image blurring problem thatgains importance in design of displays of large sizes and design of digital cameras. This thesis proposes a new image filtering method basedon visual characteristics of human eye such as MTF. In contrast to the traditional filtering methods based on human visual characteristics this thesis takes into account the anisotropy of the human eye vision. The proposed method is based on laboratory measurements of the human eye MTF and takes into account degradation of the image by the latter. This method improves an image in the way it will be degraded by human eye MTF to give perception of the original image quality. This thesis gives a basic understanding of an image filtering approach and the concept of MTF and describes an algorithm to perform an image enhancement based on MTF of human eye. Performed experiments have shown quite good results according to human evaluation. Suggestions to improve the algorithm are also given for the future improvements.

Minimum error contrast enhancement

Contrast enhancement is an image processing technique where the objective is to preprocess the image so that relevant information can be either seen or further processed more reliably. These techniques are typically applied when the image itself or the device used for image reproduction provides poor visibility and distinguishability of different regions of interest inthe image. In most studies, the emphasis is on the visualization of image data,but this human observer biased goal often results to images which are not optimal for automated processing. The main contribution of this study is to express the contrast enhancement as a mapping from N-channel image data to 1-channel gray-level image, and to devise a projection method which results to an image with minimal error to the correct contrast image. The projection, the minimum-error contrast image, possess the optimal contrast between the regions of interest in the image. The method is based on estimation of the probability density distributions of the region values, and it employs Bayesian inference to establish the minimum error projection.

Overture de l'opera Le Roi Theodore par mr Paesiello

Simananniemen käsikirjoituskokoelma.

Enhancement of R&D project management system

Stora Enso has research centres in Finland, Sweden and Germany. The research centres use PIMS as a research project invoicing and monitoring system. Possible reorganization and new financing model for R&D functions have been considered and the project management system should be developed to support the new operation model. The objective of this thesis is to find a model for R&D project management, and to present the project management system of Stora Enso, and to discuss if the current system could be developed to respond to the new needs or should it be replaced with another system. The theoretical part of the study describes challenges in R&D project management, and presents different project characteristics, and methods for managing R&D project portfolio. It is also described how the project management system can support project monitoring and controlling, and how inter-project learning can be enhanced. The empirical part of the study presents the current project management system of Stora Enso and how the system should be developed to support Stora Enso’s R&D functions better. In conclusion, it is stated that there is no relevant reason to replace PIMS with another system, because PIMS can be developed to support R&D project management better with a hybrid system. It is also suggested that the new financing model should not be implemented before more comprehensive analysis of its effects is conducted.

Partie septentrionale de la Russie Européenne òu sont distinguées éxactement toutes les Provinces, d’aprés le détail de l’Atlas Russien. Par le Sr. Robert de Vaugondy fils. géog. ordin? du roi

Venäjän Euroopan puoleisen pohjoisosan kartta, jossa Suomen alue näkyy Venäjän luoteisena naapurina. - 1 kartta : vär. ; 47,8 x 58,5 cm, lehti 50,5 x 62,7 cm. - Mittakaava [N. 1: 3350000]. - Myös teoksessa: Atlas Universel, Par M. Robert Geographe ordinaire du Roy, et Par M. Robert De Vaugondy son fils Geographe ord. du Roy, et de S. M. Polonoise, Duc de Lorraine et de Bar, et Associe de L’Academie Royale des Sciences et belles Lettres de Nancy ... 1757. A Paris, Chez Les Auteurs ... Boudet Libraire Imprimeur du Roi

Kustannukset ja kannattavuus RFID- ja toiminnanohjausjärjestelmien integrointiprojektissa

Maailmantalouden jyrkkä lasku vuonna 2008 ajoi yritykset säästökuurille. Säästöjä pyritään saamaan esimerkiksi automatisoimalla toimintoja. Yksi tapa luoda kustannussäästöjä on käyttää RFIDteknologiaa varastoinnin toimien tehostukseen. Tämän tutkimuksen pääasiallisena tavoitteena on ollut rakentaa yksinkertainen laskentamalli RFID- ja toiminnanohjausjärjestelmien integrointiprojektin kustannusten ja kannattavuuden laskemiseen. Toisena tavoitteena on ollut selvittää, mitkä tekijät vaikuttavat investoinnin kannattavuuteen. Tutkimus rajattiin tarkastelemaan varaston saapuvan tavaran vastaanoton prosessia ja sen toimintojen automatisointia RFID-järjestelmän avulla. Laskentamalli muodostuu kolmesta osasta: investoinnin kokonaiskustannusten arvioinnista, investoinnista saatavien kustannussäästöjen arvioinnista ja kannattavuuslaskelmista. Investointien kokonaiskustannusten arviointia varten rakennettiin luettelo yleisimmistä kustannuslajeista. Investoinnista saatavien kustannussäästöjen arviointi tehtiin analysoimalla nykyprosesseja ja etsimällä niistä toimintoja, jotka tehostuvat RFID-järjestelmän avulla. Varsinaisina kannattavuuslaskentamenetelminä käytettiin investoinnin takaisinmaksuajan menetelmää sekä pääoman tuottoasteen menetelmää. Tutkimuksen tuloksena todettiin rakennetun laskentamallin soveltuvan hyvin investoinnin kustannusten ja kannattavuuden arviointiin. Samalla havaittiin yrityksen toimialan, saapuvien lähetysten määrän ja lähetysten rivimäärän vaikuttavan merkittävästi RFID- jatoiminnanohjausjärjestelmän integrointiprojektin kannattavuuteen.

Superconducting properties and their enhancement in ReBa2Cu3O7-delta (RE = Y and Gd) films prepared by pulsed laser deposition

Due to font problem on the tilte field the titlte of the thesis is corrected here. The title of the thesis is: Superconducting properties and their enhancement in ReBa₂Cu₃O₇-delta (RE = Y and Gd) films prepared by pulsed laser deposition

Tunnuslukujen monimuotoisuus: ROI, RI ja EVA

Tässä työssä käsitellään sijoitetun pääoman tuottoprosentin, jäännöskatteen ja taloudellisen lisäarvon historiaa, käsitteitä ja käyttöä. Erityisesti keskitytään näistä tunnusluvuista käytettyjen määritelmien moninaisuuteen. Aluksi tutustutaan tunnuslukujen historiaan ja määritelmiin. Tämän jälkeen tutkitaan niiden käyttömahdollisuuksia johdon ja rahoituksen laskentatoimessa. Lopuksi tutkitaan empiirisen aineiston avulla näiden tunnuslukujen käyttöä yrityksissä. Sijoitetun pääoman tuottoprosentti syntyi 1900-luvun alussa Yhdysvalloissa, josta se levisi maailmanlaajuiseksi. Sijoitetun pääoman tuottoprosentti on suosittu tunnusluku sen helppokäyttöisyyden ansiosta. Rahoituksen laskentatoimen puolella on annettu tarkat ohjeet sijoitetun pääoman tuottoprosentin laskemiseksi, koska sen esittäminen ulkoisessa tiedottamisessa on joillekin yrityksille lakisääteistä. Johdon laskentatoimessa ei ole olemassa sääntöjä tämän tunnusluvun laskemiseksi, ja se voidaan laskea yrityksen haluamalla tavalla. Jäännöskate on ensimmäisen kerran mainittu kirjallisuudessa jo 1700-luvun loppupuolella, mutta sen käytöstä tuli yleisempää vasta 1900-luvulla. Jäännöskate ei kuitenkaan koskaan saavuttanut suurta suosiota, eikä sitä nykyään juuri käytetä. Jäännöskatteeseen pohjautuva taloudellinen lisäarvo nousi julkisuuteen, kun Stern Stewart & Co. rekisteröi sen tuotemerkikseen 1980-luvun lopussa. Verrattuna jäännöskatteeseen taloudellinen lisäarvo vastaa paremmin yrityksen todellista arvonmuodostusta. Näiden tunnuslukujen laskenta ei ole lakisääteisiä, joten kaikki yritykset voivat laskea ne omalla tavallaan. Jäännöskatetta ja taloudellista lisäarvoa käytetään lähinnä johdon laskentatoimessa, mutta vähitellen ne ovat siirtymässä myös rahoituksen laskentatoimeen.

A Communication Middleware Quality Enhancement with Qt Framework

In this thesis, a Peer-to-Peer communication middleware for mobile environment is developed using the Qt framework and the Qt Mobility extension. The Peer-to-Peer middleware – called as PeerHood – is for service sharing in network neighborhood. In addition, the PeerHood enables service connectivity and device monitoring functionalities. The concept of the PeerHood is already available in native C++ implementation on Linux platform using services from the platform. In this work, the PeerHood concept is remade to be based on use of the Qt framework. The objective of the new solution is to increase PeerHood quality with using functionalities from the Qt framework and the Qt Mobility extension. Furthermore, by using the Qt framework, the PeerHood middleware can be implemented to be portable cross-platform middleware. The quality of the new PeerHood implementation is evaluated with defined quality factors and compared with the existing PeerHood. Reliability, CPU usage, memory usage and static code analysis metrics are used in evaluation. The new PeerHood is shown to be more reliable and flexible that the existing one.

La figure de la terre, determinée par les observations de Messieurs de Maupertuis, Clairaut, Camus, Le Monnier, de lʼAcadémie Royale des Sciences, & de M. lʼAbbé Outhier, Correspondant de la même Académie, Accompagnés de M. Celsius, Professeur dʼAstronomie à Upsal: faites par ordre du roi au cercle polaire : par M. de Maupertuis.

Digital reproduction, The National Library of Finland, Centre for Preservation and Digitisation, Mikkeli

Enhancement of water removal in the press section

The effectiveness of water removal on press section is very important for a paper and board machine’s functioning, efficiency and economy. Today, the most effective method for wet pressing is shoe press technology. Metso has carried out a number of studies concerning anew type of water removal method for a press section, which has also been patented. These studies include rough sketches and some test runs. These issues form the basis of this thesis. The objective of this work was to gather together information for a new and enhanced waterremoval method for a press section by studying the functioning of the device andcarrying out test runs. This method is referred to here as Hydronip. The main goal was tobuild a functional test site which fulfills all the necessary requirements and has all thenecessary information gathering devices. The design process was carried out by emphasizing the safety aspects. The goal was also to gather together information about the nip structure in running conditions, the seal function, and to carry out the nip tests with paper or board wads. This thesis consists of a theory part, the design and construction of the test site, and carrying out test runs through information gathering. The theory part consists of the principals of water removal from a press section, Hydronip construction, and the requirements for the test place. The safety aspects were taken into account especially in test runs, but also in the assembly stages. The design and construction of the test site includes the selection of equipment and surroundings that are needed for managing the test runs in the best possible way at certain premises. The test site included the equipment that was already on the premises. Some equipment could be used as it was but some equipment had to be manufactured or modified from existing equipment. A functional test site with information gathering devices was accomplished as a result of thethesis. Test runs demonstrated that the Hydronip concept is, at least on a small scale,functional. Short-term tests for seal functioning showed that the seal can be lubricatedsufficiently under different kinds of nip load situations. Wad tests demonstrated that the metal belt is durable against different sizes of external particles. The seal also endured wad tests even though the pressure impacts impaired the lubrication. MTS tests showing dry content increases, combined with a rough cost calculation and the basic function of the machine in test runs, show that with some further study Hydronip could be a promising new product for water removal from a paper or board machine’s press section.

Value Proposition Enhancement in Retailers of the HVAC Industry

This case study explored value proposition and relationship marketing de-terminants in the HVAC (Heating, Ventilation and Air Conditioning) indus-try. Concretely, the case involved Purmo, a prominent brand and market leader radiator manufacturer, its relationship marketing practices with the retailers of their product (radiator installers) and the value proposition which is being used to reach the end-user. In the field work, five heating experts/entrepreneurs in the installation business were interviewed and asked about their opinion on Purmo and the end-user’s needs. The findings suggest that while installers appreciate Purmo as a supplier and respect it as a company, the loyalty that they have towards it has no repercussions on their product advocacy to ultimate consumers. Installers proved to be attracted to standard model radiators and to be apathetic to the benefits that more advanced models can provide. The reasons for this behavior were found to be their preference for products with better availa-bility and their reluctance to interfere with the customers’ decision making processes.

Quality enhancement in teacher education : Tanzanian teacher educators’ conceptions and experiences

The overall aim of this study was to investigate and examine teacher educators’ conceptions and experiences of quality of teacher education. The research interest therefore was two-fold: a) to deepen understanding of the concept quality and b) scrutinize experiences of teacher educators of quality enhancement. To achieve this ambition the study was conducted in the context of a newly established university college-based teacher education in Tanzania. Two research questions guided the study. The first focused on investigating how teacher educators conceived quality in the domain of teacher education and the second intended to explore teacher educators’ experiences of quality enhancement. The theoretical framework of the study centered on the concepts of teacher education, quality, and criteria for quality enhancement. Phenomenographic and phenomenological approaches under the main umbrella of qualitative research design were selected. Twenty five teacher educators participated in the study. Interviews were used for the collection of the data. The results of the first research question, in brief, indicate that teacher educators’ conceptions of quality are expressed in two main categories, namely, outstanding academic scholarship and adequate professional scholarship. Quality as outstanding academic scholarship was illustrated by two subcategories: excellence and positive transformation. While the former was composed of two aspects, the latter was demonstrated by three aspects. Quality as adequate professional scholarship was described in three sub-categories. The first was improved teaching competency, consisting of two aspects. The second was conscious research orientation, which is displayed by three aspects, and the last was enhancing the ability to reflect, represented by two aspects. The results of the second research question, which focused on exploring teacher educators’ experience of quality enhancement, were classified into two main categories of description: insufficient programs of teacher education and unsatisfactory professional development of teacher educators. From the two categories, the strengths, weaknesses, opportunities and challenges related to programs of educating teachers, particularly curriculum development and implementation, and the professional development of educators, were exposed. Since the ambition of conducting the study was to deepen the understanding by producing insight that would act as a platform for appraising and enhancing the quality of teacher education, the results hopefully can be used for the development of the quality of teacher education in Tanzania.