The power of support: an exploration of the mentoring relationship

Tutkimuksen pääasiallisena tavoitteena on selvittää ne moninaiset näkökulmat, joita mentori sekä mentoroitava läpikäyvät osallistuessaan mentorointiohjelmaan. Tutkimuksen avulla pyritään myös selvittämään vastaavanlaisen tuen saannin tehokkuutta sekä mentoroinnin sisältäminen elementtien hyödyllisyyttä. Pyrkimyksenä on myös selvittää sekä ymmärtää ne dynaamiset mentorointiprosessin ominaisuudet molempien prosessiin osallistuvien tahojen näkökulmasta. Tutkimuksen teoriaosuudessa käsitellään mentorointia, mentorointiin liittyviä vuorovaikutussuhteita sekä näihin liittyviä eri näkökulmia. Teoria koostuu monipuolisesta, kansainvälisestä sekä kotimaisesta kirjallisuudesta. Tutkimuksen aineiston keruu suoritetaan puolistrukturoiduilla avoimilla haastatteluilla, jotka suoritetaan järjestämällä kahdenkeskisiä teemahaastatteluita. Mentorointisuhteella on todettu olevan voimakas vaikutus siihen osallistuvien henkilöiden elämään. Mentorointisuhteen tarkoituksellisuus on tullut todettua myös kun itse vuorovaikutussuhde on osoittautunut hyödylliseksi osallistujille. Mentoroitavilla on odotuksia, että mentorit täyttävät seuraavanlaisia rooleja: neuvonantaja, roolimalli sekä mahdollisesti tukea antava ystävä. Kaikissa läpikäydyissä tapauksissa mentori pystyi tarjoamaan jonkun näistärooleista mentoroitavalle. Mentoroitava, puolestaan, otti tämän tuen vastaan jahyötyi siitä.

Power of Photos and Video in Education

Konferenssiesitelmä: PHOTOGRAPHY NEXT International Conference at Moderna museet and Nordiska Museet, Stockholm, 4-5 February, 2010

The Power of Data - Advocating for Library by Showing Evidence of Impact

Markku Laitinen's keynote presentation in the QQML conference in Limerick, Ireland the 23rd of April, 2012.

Reducing auxiliary power of a fluid bed boiler island

The aim of this thesis is to find and analyze different methods which reduce fluid bed boilers’ auxiliary power consumption. The objective is to examine the effects and feasibility of these methods. The literature part explains how fluid bed boilers work and what are the main sources of auxiliary power consumption. Designs and operation of these equipment are presented. The literature part also discusses the basics of auxiliary power consumption reduction and introduces four low pressure drop constructions. The experimental part inspects six different methods. Effects of these methods on the auxiliary power consumption are calculated and their impacts on the operation of the boiler are modeled. Calculations show that reasonable changes can reduce fluid bed boiler’s auxiliary power consumption by 2,1-10,2 %. Biggest reductions come from lower air coefficients, smaller bed a-level pressures and lower primary/secondary air –ratios. Models showed no problems with the smaller bed a-level pressures. With the lower air coefficients and smaller primary/secondary air –ratios the models showed a significant increase in the carbon monoxide levels.

Investment Determinants and Future Shape of Russia's Power Generation

The reformation of power sector is still in the process of development. The present day situation in Russian electricity power market ischaracterized as transitional period: competitive electricity market is forming, new companies are being created and the power of government regulation is decreasing. The main aim of the reformation is to attract much-needed private investments to the power sector. The electricity consumption increases very rapidly and power sector has to cope with high demand. The goal of this master's thesis is to analyze the nowadays situation in Russian power sector, such as generation structure, condition of electricity networks, electricity price formation for end-users, shape of fuel sector and investments risks and attraction.The final result of this work is creation of scenario of Russian power sector future shape and analysis of the present day situation.

The Optimisation of the Draft Tube of a Hydro Power Plant at Off-Design Conditions

Several possible methods of increasing the efficiency and power of hydro power plants by improving the flow passages are investigated in this stydy. The theoretical background of diffuser design and its application to the optimisation of hydraulic turbine draft tubes is presented in the first part of this study. Several draft tube modernisation projects that have been carried out recently are discussed. Also, a method of increasing the efficiency of the draft tube by injecting a high velocity jet into the boundary layer is presented. Methods of increasing the head of a hydro power plant by using an ejector or a jet pump are discussed in the second part of this work. The theoretical principles of various ejector and jet pump types are presented and four different methods of calculating them are examined in more detail. A self-made computer code is used to calculate the gain in the head for two example power plants. Suitable ejector installations for the example plants are also discussed. The efficiency of the ejector power was found to be in the range 6 - 15 % for conventional head increasers, and 30 % for the jet pump at its optimum operating point. In practice, it is impossible to install an optimised jet pump with a 30 % efficiency into the draft tube as this would considerabely reduce the efficiency of the draft tube at normal operating conditions. This demonstrates, however, the potential for improvement which lies in conventional head increaser technology. This study is based on previous publications and on published test results. No actual laboratory measurements were made for this study. Certain aspects of modelling the flow in the draft tube using computational fluid dynamics are discussed in the final part of this work. The draft tube inlet velocity field is a vital boundary condition for such a calculation. Several previously measured velocity fields that have successfully been utilised in such flow calculations are presented herein.

The role of power relations in strategic supply management – A value net approach

Supplier relationships are key elements of supply management and thus have attracted substantial research interest among academics and practitioners. The collaborative nature of relationships has been the focus of the mainstream research, and limited interest has been channelled towards power in buyer–supplier relationships. However, power is one of the key factors determining the outcomes in many business relations. Hence, one of the main objectives of this dissertation is to clarify how power may influence the nature of buyer–supplier relationships and, moreover, the depth of collaboration. Another main objective is to clarify the role of power relations in strategic supply management. Given the different nature of relationships, the firm needs divergent strategies in its supply management in order to handle them efficiently. Power has been identified as one of the factors that affect the nature of buyer–supplier relationships, and firms should thus develop strategies for handling power relations. Three research questions are addressed in pursuit of these objectives, the aim being to clarify the sources of power, the influence of power on collaboration, and the role of buyer–supplier relationships in the firm’s supply strategy. This dissertation has two parts. The first part provides a synthesis of the overall dissertation, and the second part comprises five complementary research papers. The qualitative research method is applied in an empirical case study from the Finnish food industry. The main contribution of this dissertation is that it clarifies the role of power relations in strategic supply management in value nets, and discloses the nature of power as an influencing factor in supplier relationships. It extends the discussion on power in buyer– supplier relationships in highlighting the context of networks and raising the question of network effects on power relations. It also illustrates how power positions and power relations in value nets can be determined based on the sources of power of the network actors, and shows their influence on collaboration.

Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.

International comparison of Russian food processing industry -Finnish perspective

Työn päätavoitteena on kartoittaa Venäjän elintarviketeollisuutta ulkomaisen investoijan näkökulmasta. Tutkimus arvioi liiketoimintamahdollisuuksia ja kilpailutilannetta Venäjän elintarviketeollisuudessa ja auttaa ulkomaisia yrityksiä toteuttamaan liiketoimintastrategioitaan Venäjällä. Venäjän ja muiden siirtymätalousmaiden markkinatilannevertailujen lisäksi Venäjän alueita verrataan keskenään. Myös mahdollisen WTO jäsenyyden vaikutuksia arvioidaan. Kommunismin perintö vaikuttaa edelleen Venäjän elintarviketeollisuuteen ja maatalouteen. Maatalouden tuottavuus on kaukana länsimaisesta tasosta ja maatiloilta puuttuu rahoitusta. Etenkin maidon- ja lihanjalostajat kärsivät raaka-ainepulasta. Venäjän kriisi vuonna 1998 vahvisti paikallista teollisuustuotantoa mutta aiheutti ongelmia ulkomaisille investoijille ja yrityksille, jotka vievät tuotteitaan Venäjälle. Edut, joita mahdollinen maailmankauppajärjestö WTO:n jäsenyys tuo, ovat merkittävämpiä Venäjälle kuin sen kauppakumppaneille. Venäjän alueet eivät ole yhtäläisesti kehittyneitä ja kuluttajien ostovoima vaihtelee paljon. Itsestään selvin ja houkuttelevin vaihtoehto menestyvien elintarvikeyritysten laajentumiselle löytyy alueilta, joilla ostovoima on suurin. Tähän asti kansainväliset elintarvikeyritykset ovat olleet enemmän kiinnostuneita Itä- ja Keski-Euroopan maista. Käytettävissä olevat tulot ovat Itä- ja Keski-Euroopan maissa suurempia kuin Venäjällä, joten tuottajat pystyvät myymään myös kalliimpia tuotteita. Työvoimakustannukset Venäjällä tulevat olemaan suotuisia vielä muutaman vuosikymmenen ja markkinoiden koko on merkittävä. Siksi kansainvälisillä elintarvikeyrityksillä riittää kiinnostusta tulevaisuudessa investoida myös Venäjälle.

The Persistence of Finnish Equity Fund Performance

Tutkimuksen tavoitteena on selvittää, esiintyykö suomeen sijoittavilla osakerahastoilla menestyksen pysyvyyttä. Tutkimusaineisto koostuu kaikista suomalaisista osakerahastoista, jotka toimivat ajanjaksolla 15.1.1998-13.1.2005. Aineisto on vapaa selviytymisvinoumasta. Suorituskyvyn mittareina käytetään CAPM-alfaa sekä kolmi- ja nelifaktori-alfaa. Empiirisessä osassa osakerahastojen menestyksen pysyvyyttä testataan Spearmanin järjestyskorrelaatiotestillä. Evidenssi menestyksen pysyvyydestä jäi vähäiseksi, vaikkakin sitä esiintyi satunnaisesti kaikilla menestysmittareilla joillakin ranking- ja sijoitusperiodin yhdistelmillä. CAPM-alfalla tarkasteltuna tilastollisesti merkitsevää menestyksen pysyvyyttä esiintyi selvästi useammin kuin muilla menestysmittareilla. Tulokset tukevat viimeaikaisia kansainvälisiä tutkimuksia, joiden mukaan menestyksen pysyvyys riippuu usein mittaustavasta. Menestysmittareina käytettyjen regressiomallien merkitsevyystestit osoittavat multifaktorimallien selittävän osakerahastojen tuottoja CAPM:a paremmin. Lisätyt muuttujat parantavat merkittävästi CAPM:n selitysvoimaa.

The Methods of Possible Joint Treatment of Manure and Sewage Sludge in the Leningrad Region

The nutrient load to the Gulf of Finland has started to increase as a result of the strong economic recovery in agriculture and livestock farming in the Leningrad region. Also sludge produced from municipal wastewater treatment plant of the Leningrad region causes the great impact on the environment, but still the main options for its treatment is disposal on the sludge beds or Landfills. The aim of this study was to evaluate the implementation of possible joint treatment methods of manure form livestock and poultry enterprises and sewage sludge produced from municipal wastewater treatment plants in the Leningrad region. The study is based on published data. The most attention was put on the anaerobic digestion and incineration methods. The manure and sewage sludge generation for the whole Leningrad region and energy potential produced from their treatment were estimated. The calculations showed that total amount of sewage sludge generation is 1 348 000 t/a calculated on wet matter and manure generation is 3 445 000 t/a calculated on wet matter. The potential heat release from anaerobic digestion process and incineration process is 4 880 000 GJ/a and 5 950 000 GJ/a, respectively. Furthermore, the work gives the overview of the general Russian and Finnish legislation concerning manure and sewage sludge treatment. In the Gatchina district it was chosen the WWTP and livestock and poultry enterprises for evaluation of the centralized treatment plant implementation based on anaerobic digestion and incineration methods. The electricity and heat power of plant based on biogas combustion process is 4.3 MW and 7.8 MW, respectively. The electricity and heat power of plant based on manure and sewage sludge incineration process is 3.0 MW and 6.1 MW, respectively.

Identifying first graders at risk of reading and writing difficulties : creating a group-based screening tool in kiswahili in Tanzania

Early identification of beginning readers at risk of developing reading and writing difficulties plays an important role in the prevention and provision of appropriate intervention. In Tanzania, as in other countries, there are children in schools who are at risk of developing reading and writing difficulties. Many of these children complete school without being identified and without proper and relevant support. The main language in Tanzania is Kiswahili, a transparent language. Contextually relevant, reliable and valid instruments of identification are needed in Tanzanian schools. This study aimed at the construction and validation of a group-based screening instrument in the Kiswahili language for identifying beginning readers at risk of reading and writing difficulties. In studying the function of the test there was special interest in analyzing the explanatory power of certain contextual factors related to the home and school. Halfway through grade one, 337 children from four purposively selected primary schools in Morogoro municipality were screened with a group test consisting of 7 subscales measuring phonological awareness, word and letter knowledge and spelling. A questionnaire about background factors and the home and school environments related to literacy was also used. The schools were chosen based on performance status (i.e. high, good, average and low performing schools) in order to include variation. For validation, 64 children were chosen from the original sample to take an individual test measuring nonsense word reading, word reading, actual text reading, one-minute reading and writing. School marks from grade one and a follow-up test half way through grade two were also used for validation. The correlations between the results from the group test and the three measures used for validation were very high (.83-.95). Content validity of the group test was established by using items drawn from authorized text books for reading in grade one. Construct validity was analyzed through item analysis and principal component analysis. The difficulty level of most items in both the group test and the follow-up test was good. The items also discriminated well. Principal component analysis revealed one powerful latent dimension (initial literacy factor), accounting for 93% of the variance. This implies that it could be possible to use any set of the subtests of the group test for screening and prediction. The K-Means cluster analysis revealed four clusters: at-risk children, strugglers, readers and good readers. The main concern in this study was with the groups of at-risk children (24%) and strugglers (22%), who need the most assistance. The predictive validity of the group test was analyzed by correlating the measures from the two school years and by cross tabulating grade one and grade two clusters. All the correlations were positive and very high, and 94% of the at-risk children in grade two were already identified in the group test in grade one. The explanatory power of some of the home and school factors was very strong. The number of books at home accounted for 38% of the variance in reading and writing ability measured by the group test. Parents´ reading ability and the support children received at home for schoolwork were also influential factors. Among the studied school factors school attendance had the strongest explanatory power, accounting for 21% of the variance in reading and writing ability. Having been in nursery school was also of importance. Based on the findings in the study a short version of the group test was created. It is suggested for use in the screening processes in grade one aiming at identifying children at risk of reading and writing difficulties in the Tanzanian context. Suggestions for further research as well as for actions for improving the literacy skills of Tanzanian children are presented.