Suorituskyvyn analysointi ja mittaaminen julkisella sektorilla

Suorituskyvyn mittaamiselle ja seurannalle on nykyisin laajaa tarvetta myös julkisella sektorilla. Tutkimuksen tarkoituksena oli kehittää soveltuvia suorituskykyä kuvaavia mittareita ja rakentaa niistä käyttökelpoinen suorituskyvyn analysointijärjestelmä julkisen sektorin käyttöön. Ensisijaisena lähtökohtana olivat fyysiset mittarit, koska ne soveltuvat paremmin julkisen sektorin toimintaympäristöön.Tutkimuksen teoriaosassa esitetään joitakin suorituskyvyn analysointijärjestelmiä. Julkiselle sektorille soveliaina viitekehyksinä esitellään yleisellä tasolla balanced scorecard, suorituskykypyramidi, benchmarking, dynaaminen suorituskyvyn mittausjärjestelmä, laatupalkintokriteeristö, SAKE-sovellus ja suorituskykymatriisi.Työssä paneudutaan melko laajalti tekijöihin, joilla on voimakas vaikutus suorituskykyyn. Tällaisia tekijöitä ovat laatuasiat, tuottavuus ja organisaation kilpailukyvykkyys.Tutkimuksen käytännön osassa rakennettiin suorituskyvyn analysointi- ja mittausjärjestelmä. Ensin määriteltiin mittausjärjestelmään soveliaat suorituskyvyn osa-alueet ja seuraavaksi mittarit. Taloudellisia mittareita kehitettiin vain muutama, sillä pääpaino mittarien kehittelyssä olivat ei-taloudelliset mittarit. Mittaristo auttaa organisaatiota mittaamaan sen tilannetta matkalla jatkuvan parantamisen tiellä.

Transparent and secure remote network storage system using an untrusted server

Työssä kehitettin läpinäkyvä Internet Small Computer Systems Interface-verkkolevyä (iSCSI) käyttävä varmistusjärjestelmä. Verkkolevyn sisältö suojattiin asiakaspään salauskerroksella (dm-crypt). Järjestely mahdollisti sen, että verkkolevylle tallennetut varmuuskopiot pysyivät luottamuksellisina, vaikka levypalvelinta tarjoava taho oli joko epäluotettava tai suorastaan vihamielinen. Järjestelmän hyötykäyttöä varten kehitettiin helppokäyttöinen prototyyppisovellus. Järjestelmän riskit ja haavoittuvuudet käytiin läpi ja analysoitiin. Järjestelmälle tehtiin myös karkea kryptoanalyysi sen teknistenominaisuuksien pohjalta. Suorituskykymittaukset tehtiin sekä salatulle että salaamattomalle iSCSI-liikenteelle. Näistä todettiin, että salauksen vaikutus suorituskykyyn oli häviävän pieni jopa 100 megabittiä sekunnissa siirtävillä verkkonopeuksilla. Lisäksi pohdittiin teknologian muita sovelluskohteita ja tulevia tutkimusalueita.

On Modelling, System Identification and Control of Servo-Systems with a Flexible Load

The present study was done with two different servo-systems. In the first system, a servo-hydraulic system was identified and then controlled by a fuzzy gainscheduling controller. The second servo-system, an electro-magnetic linear motor in suppressing the mechanical vibration and position tracking of a reference model are studied by using a neural network and an adaptive backstepping controller respectively. Followings are some descriptions of research methods. Electro Hydraulic Servo Systems (EHSS) are commonly used in industry. These kinds of systems are nonlinearin nature and their dynamic equations have several unknown parameters.System identification is a prerequisite to analysis of a dynamic system. One of the most promising novel evolutionary algorithms is the Differential Evolution (DE) for solving global optimization problems. In the study, the DE algorithm is proposed for handling nonlinear constraint functionswith boundary limits of variables to find the best parameters of a servo-hydraulic system with flexible load. The DE guarantees fast speed convergence and accurate solutions regardless the initial conditions of parameters. The control of hydraulic servo-systems has been the focus ofintense research over the past decades. These kinds of systems are nonlinear in nature and generally difficult to control. Since changing system parameters using the same gains will cause overshoot or even loss of system stability. The highly non-linear behaviour of these devices makes them ideal subjects for applying different types of sophisticated controllers. The study is concerned with a second order model reference to positioning control of a flexible load servo-hydraulic system using fuzzy gainscheduling. In the present research, to compensate the lack of dampingin a hydraulic system, an acceleration feedback was used. To compare the results, a pcontroller with feed-forward acceleration and different gains in extension and retraction is used. The design procedure for the controller and experimental results are discussed. The results suggest that using the fuzzy gain-scheduling controller decrease the error of position reference tracking. The second part of research was done on a PermanentMagnet Linear Synchronous Motor (PMLSM). In this study, a recurrent neural network compensator for suppressing mechanical vibration in PMLSM with a flexible load is studied. The linear motor is controlled by a conventional PI velocity controller, and the vibration of the flexible mechanism is suppressed by using a hybrid recurrent neural network. The differential evolution strategy and Kalman filter method are used to avoid the local minimum problem, and estimate the states of system respectively. The proposed control method is firstly designed by using non-linear simulation model built in Matlab Simulink and then implemented in practical test rig. The proposed method works satisfactorily and suppresses the vibration successfully. In the last part of research, a nonlinear load control method is developed and implemented for a PMLSM with a flexible load. The purpose of the controller is to track a flexible load to the desired position reference as fast as possible and without awkward oscillation. The control method is based on an adaptive backstepping algorithm whose stability is ensured by the Lyapunov stability theorem. The states of the system needed in the controller are estimated by using the Kalman filter. The proposed controller is implemented and tested in a linear motor test drive and responses are presented.

Analysis of torque and speed ripple producing non-idealities of frequency converters in electric drives

Electric motors driven by adjustable-frequency converters may produce periodic excitation forces that can cause torque and speed ripple. Interaction with the driven mechanical system may cause undesirable vibrations that affect the system performance and lifetime. Direct drives in sensitive applications, such as elevators or paper machines, emphasize the importance of smooth torque production. This thesis analyses the non-idealities of frequencyconverters that produce speed and torque ripple in electric drives. The origin of low order harmonics in speed and torque is examined. It is shown how different current measurement error types affect the torque. As the application environment, direct torque control (DTC) method is applied to permanent magnet synchronous machines (PMSM). A simulation model to analyse the effect of the frequency converter non-idealities on the performance of the electric drives is created. Themodel enables to identify potential problems causing torque vibrations and possibly damaging oscillations in electrically driven machine systems. The model is capable of coupling with separate simulation software of complex mechanical loads. Furthermore, the simulation model of the frequency converter's control algorithm can be applied to control a real frequency converter. A commercial frequencyconverter with standard software, a permanent magnet axial flux synchronous motor and a DC motor as the load are used to detect the effect of current measurement errors on load torque. A method to reduce the speed and torque ripple by compensating the current measurement errors is introduced. The method is based on analysing the amplitude of a selected harmonic component of speed as a function oftime and selecting a suitable compensation alternative for the current error. The speed can be either measured or estimated, so the compensation method is applicable also for speed sensorless drives. The proposed compensation method is tested with a laboratory drive, which consists of commercial frequency converter hardware with self-made software and a prototype PMSM. The speed and torque rippleof the test drive are reduced by applying the compensation method. In addition to the direct torque controlled PMSM drives, the compensation method can also beapplied to other motor types and control methods.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

Improving ERP change tool processes to align business processes and ERP system

Nopea teknologian kehitys sekä kansainvälistymisen mukana tuoma kilpailupaine pakottavat yritykset jatkuvaan liiketoimintaprosessien kehittämiseen. Muutoksista organisaation rakenteissa sekä yrityksen prosesseissa on tullut yleisiä toimenpiteitä. Yksi näkyvimmistä toiminnallisista uudistuksesta on ollut toiminnanohjausjärjestelmän käyttöönotto. Toiminnanohjausjärjestelmän rakenne ja kehitys aiheuttaa yleensä suurimmat vaikeudet pyrittäessä rakentamaan liiketoimintaprosessien läpinäkyvyyttä esittävä tietojärjestelmäympäristö. Tässä tutkimuksessa liiketoiminnan sekä toiminnanohjausjärjestelmän prosessien yhdistäminen on tehty ns. toiminnanohjausjärjestelmä muutostyökaluilla. Kyseiset muutostyökalut on järjestetty yrityksissä tietojärjestelmä ympäristöön ja niiden avulla voidaan korjata teknisiä ongelmia sekä muuttaa itse prosesseja. Tutkimuksen empiria osuudessa on käytetty case-tutkimusmenetelmää Kone Oyj:n prosessien kehittämisosastolla. Tutkimuksen tavoitteena oli parantaa toiminnanohjausjärjestelmän muutostyökalujen prosesseja, liiketoimintaprosessien sekä toiminnanohjausjärjestelmän yhdistämiseksi ja harmonisoimiseksi. Tutkimuksen tavoitteiden täyttämiseksi, prosessijohtamisen käsitteitä käytettiin muutostyökaluprosessien parannusehdotusten löytymiseksi. Prosessijohtamisen käsitteet tarkoittavat prosessikartan, prosessin toimintojen, sekä prosessin kustannusten tutkimista ja hyväksikäyttöä. Prosessijohtamisen käsitteeseen kuuluu myös liiketoimintaprosessien jatkuvan parantamisen sekä uudelleenjärjestämisen mallien kuvaus. Toiminnanohjausjärjestelmäympäristön kuvaus teorian toisena osuutena antaa pohjaa muutostyökalujen prosessien käytölle. Tutkimuksen tuloksina voidaan todeta että tutkimusalue on hyvin monimutkainen ja vaikea. Toimintajärjestelmistä ei ole kirjoitettu teoriaa kovinkaan runsaasti, lukuunottamatta yritysten itse tekemiä tutkimuksia. Tutkimuksessa tarkasteltaville prosesseille löytyi kuitenkin parannusehdotuksia sekä ns. optimaalisen prosessimallin ominaisuuksia.

Developing a user-centric event management system

This thesis describes the development of a software requirements specification for a user-centric event management system. The system is set to satisfy three goals: adding value for the event attendees, adding value for the event organizer, and reducing the costs of arranging and running an event. The requirements are identified by researching the prescriptive traits of event business and the current state of the case company and its environment. First the professional and human needs for events are scrutinized. Second, some recent reports about the current trends in the event business are reviewed. Then the event life cycle is presented using the model of new service development, and online promotion of events and especially word-of-mouth marketing receive special attention. Events are also regarded from the perspective of social networks and social media. The case company’s current state and its competitors are reviewed to formulate the needs which the system should fulfil. Then the currently available solutions for social media oriented event management are reviewed. The result is a set of functional and non-functional requirements. The functional requirements are categorized into social media, social networking, event personalization, event management, and system administration features. The specified features and non-functional requirements satisfy the three goals set for the system.

Problems of the architecture design in the system integration

This thesis studies the problems and their reasons a software architect faces in his work. The purpose of the study is to search and identify potential factors causing problens in system integration and software engineering. Under a special interest are non-technical factors causing different kinds of problems. Thesis was executed by interviewing professionals that took part in e-commerce project in some corporation. Interviewed professionals consisted of architects from technical implementation projects, corporation's architect team leader, different kind of project managers and CRM manager. A specific theme list was used as an guidance of the interviews. Recorded interviews were transcribed and then classified using ATLAS.ti software. Basics of e-commerce, software engineering and system integration is described too. Differences between e-commerce and e-business as well as traditional business are represented as are basic types of e-commerce. Software's life span, general problems of software engineering and software design are covered concerning software engineering. In addition, general problems of the system integration and the special requirements set by e-commerce are described in the thesis. In the ending there is a part where the problems founded in study are described and some areas of software engineering where some development could be done so that same kind of problems could be avoided in the future.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

RTOS Framework for Real-Time Control System

This thesis is done as a complementary part for the active magnet bearing (AMB) control software development project in Lappeenranta University of Technology. The main focus of the thesis is to examine an idea of a real-time operating system (RTOS) framework that operates in a dedicated digital signal processor (DSP) environment. General use real-time operating systems do not necessarily provide sufficient platform for periodic control algorithm utilisation. In addition, application program interfaces found in real-time operating systems are commonly non-existent or provided as chip-support libraries, thus hindering platform independent software development. Hence, two divergent real-time operating systems and additional periodic extension software with the framework design are examined to find solutions for the research problems. The research is discharged by; tracing the selected real-time operating system, formulating requirements for the system, and designing the real-time operating system framework (OSFW). The OSFW is formed by programming the framework and conjoining the outcome with the RTOS and the periodic extension. The system is tested and functionality of the software is evaluated in theoretical context of the Rate Monotonic Scheduling (RMS) theory. The performance of the OSFW and substance of the approach are discussed in contrast to the research theme. The findings of the thesis demonstrates that the forged real-time operating system framework is a viable groundwork solution for periodic control applications.

Groupware and Workflow Tools - A Case study of SAP Business Workflow Supporting System Integration in a Global Telecommunication Company

Workflow management systems aim at the controlled execution of complex application processes in distributed and heterogeneous environments. These systems will shape the structure of information systems in business and non-business environments. E business and system integration is a fertile soil for WF and groupware tools. This thesis aims to study WF and groupware tools in order to gather in house knowledge of WF to better utilize WF solutions in future, and to focus on SAP Business Workflow in order to find a global solution for Application Link Enabling support for system integration. Piloting this solution in Nokia collects the experience of SAP R/3 WF tool for other development projects in future. The literary part of this study will guide to the world of business process automation providing a general description of the history, use and potentials of WF & groupware software. The empirical part of this study begins with the background of the case study describing the IT environment initiating the case by introducing SAP R/3 in Nokia, the communication technique in use and WF tool. Case study is focused in one solution with SAP Business Workflow. This study provides a concept to monitor communication between ERP systems and to increase the quality of system integration. Case study describes a way create support model for ALE/EDI interfaces. Support model includes monitoring organization and the workflow processes to solve the most common IDoc related errors.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Utilization of retention chemicals in non-wood containing furnishes

The usage of the non-wood pulps in furnishes for various paper grades is the real alternative for substitution of wood fibres in the papermaking. This is especially important now, when the prices for wood are increasing and forest resources are depleting in many regions of our planet. However, there are several problems associated with utilization of such pulps. In terms of the papermaking process one of the main problems is the poor dewatering of the non-wood pulps. This problem can be partially solved by means of retention aids. In the literature part were described technological features of the non-wood pulps as the raw materials for paper production. Moreover, overviews of the retention chemicals and methods for retention measurement were done; special attention was paid to the mechanisms of retention and drainage. Finally, factors affecting on the drainage and retention of non-wood pulps were considered holistically. Particular emphasis was put on the possibility of enzyme treatment for drainage improvement. It was stated that retention aids can significantly improve dewatering of non-wood pulps. In the experimental part the goal was to investigate influence of various microparticle retention aids on the drainage, retention and formation of furnish containing wheat straw pulp, obtained by novel pulping process (Formico™Fib). The parallel test were performed with reference furnish containing only wood pulps. It was found that Bentonite-CPAM retention aid can significantly improve drainage and retention; however formation seems be suffer from such additives. It was stated that performance of the Silica-Starch retention aid significantly depends on the starch dosing sequence and wet-end conditions; this system have shown better formation than other tested retention aids. Silica-CPAM retention aid have provided comparable results in retention and drainage with Bentonite-CPAM, while Silica-starch did not improve dewatering and yielded in lowest filler retention among other aids. Ultimately, optimal dosages for the tested retention chemicals have been suggested.