A modified structural stress method for fatigue assessment of welded structures

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

Optimisation of data analysis method for a fluidized bed combustion test rig

Nowadays the used fuel variety in power boilers is widening and new boiler constructions and running models have to be developed. This research and development is done in small pilot plants where more faster analyse about the boiler mass and heat balance is needed to be able to find and do the right decisions already during the test run. The barrier on determining boiler balance during test runs is the long process of chemical analyses of collected input and outputmatter samples. The present work is concentrating on finding a way to determinethe boiler balance without chemical analyses and optimise the test rig to get the best possible accuracy for heat and mass balance of the boiler. The purpose of this work was to create an automatic boiler balance calculation method for 4 MW CFB/BFB pilot boiler of Kvaerner Pulping Oy located in Messukylä in Tampere. The calculation was created in the data management computer of pilot plants automation system. The calculation is made in Microsoft Excel environment, which gives a good base and functions for handling large databases and calculations without any delicate programming. The automation system in pilot plant was reconstructed und updated by Metso Automation Oy during year 2001 and the new system MetsoDNA has good data management properties, which is necessary for big calculations as boiler balance calculation. Two possible methods for calculating boiler balance during test run were found. Either the fuel flow is determined, which is usedto calculate the boiler's mass balance, or the unburned carbon loss is estimated and the mass balance of the boiler is calculated on the basis of boiler's heat balance. Both of the methods have their own weaknesses, so they were constructed parallel in the calculation and the decision of the used method was left to user. User also needs to define the used fuels and some solid mass flowsthat aren't measured automatically by the automation system. With sensitivity analysis was found that the most essential values for accurate boiler balance determination are flue gas oxygen content, the boiler's measured heat output and lower heating value of the fuel. The theoretical part of this work concentrates in the error management of these measurements and analyses and on measurement accuracy and boiler balance calculation in theory. The empirical part of this work concentrates on the creation of the balance calculation for the boiler in issue and on describing the work environment.

The Cycle Times of Working Capital: Financial Value Chain Analysis Method

Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.

Analysis and Control of Excitation, Field Weakening and Stability in Direct Torque Controlled Electrically Excited Synchronous Motor Drives

Direct torque control (DTC) is a new control method for rotating field electrical machines. DTC controls directly the motor stator flux linkage with the stator voltage, and no stator current controllers are used. With the DTC method very good torque dynamics can be achieved. Until now, DTC has been applied to asynchronous motor drives. The purpose of this work is to analyse the applicability of DTC to electrically excited synchronous motor drives. Compared with asynchronous motor drives, electrically excited synchronous motor drives require an additional control for the rotor field current. The field current control is called excitation control in this study. The dependence of the static and dynamic performance of DTC synchronous motor drives on the excitation control has been analysed and a straightforward excitation control method has been developed and tested. In the field weakening range the stator flux linkage modulus must be reduced in order to keep the electro motive force of the synchronous motor smaller than the stator voltage and in order to maintain a sufficient voltage reserve. The dynamic performance of the DTC synchronous motor drive depends on the stator flux linkage modulus. Another important factor for the dynamic performance in the field weakening range is the excitation control. The field weakening analysis considers both dependencies. A modified excitation control method, which maximises the dynamic performance in the field weakening range, has been developed. In synchronous motor drives the load angle must be kept in a stabile working area in order to avoid loss of synchronism. The traditional vector control methods allow to adjust the load angle of the synchronous motor directly by the stator current control. In the DTC synchronous motor drive the load angle is not a directly controllable variable, but it is formed freely according to the motor’s electromagnetic state and load. The load angle can be limited indirectly by limiting the torque reference. This method is however parameter sensitive and requires a safety margin between the theoretical torque maximum and the actual torque limit. The DTC modulation principle allows however a direct load angle adjustment without any current control. In this work a direct load angle control method has been developed. The method keeps the drive stabile and allows the maximal utilisation of the drive without a safety margin in the torque limitation.

Role of oxidation-reduction cycle of iron in direct leaching of zinc concentrate

Direct leaching is an alternative to conventional roast-leach-electrowin (RLE) zinc production method. The basic reaction of direct leach method is the oxidation of sphalerite concentrate in acidic liquid by ferric iron. The reaction mechanism and kinetics, mass transfer and current modifications of zinc concentrate direct leaching process are considered. Particular attention is paid to the oxidation-reduction cycle of iron and its role in direct leaching of zinc concentrate, since it can be one of the limiting factors of the leaching process under certain conditions. The oxidation-reduction cycle of iron was experimentally studied with goal of gaining new knowledge for developing the direct leaching of zinc concentrate. In order to obtain this aim, ferrous iron oxidation experiments were carried out. Affect of such parameters as temperature, pressure, sulfuric acid concentration, ferrous iron and copper concentrations was studied. Based on the experimental results, mathematical model of the ferrous iron oxidation rate was developed. According to results obtained during the study, the reaction rate orders for ferrous iron concentration, oxygen concentration and copper concentration are 0.777, 0.652 and 0.0951 respectively. Values predicted by model were in good concordance with the experimental results. The reliability of estimated parameters was evaluated by MCMC analysis which showed good parameters reliability.

Capillary electrophoresis for monitoring of carboxylic, phenolic and amino acids in bioprocesses

Bioprocess technology is a multidisciplinary industry that combines knowledge of biology and chemistry with process engineering. It is a growing industry because its applications have an important role in the food, pharmaceutical, diagnostics and chemical industries. In addition, the current pressure to decrease our dependence on fossil fuels motivates new, innovative research in the replacement of petrochemical products. Bioprocesses are processes that utilize cells and/or their components in the production of desired products. Bioprocesses are already used to produce fuels and chemicals, especially ethanol and building-block chemicals such as carboxylic acids. In order to enable more efficient, sustainable and economically feasible bioprocesses, the raw materials must be cheap and the bioprocesses must be operated at optimal conditions. It is essential to measure different parameters that provide information about the process conditions and the main critical process parameters including cell density, substrate concentrations and products. In addition to offline analysis methods, online monitoring tools are becoming increasingly important in the optimization of bioprocesses. Capillary electrophoresis (CE) is a versatile analysis technique with no limitations concerning polar solvents, analytes or samples. Its resolution and efficiency are high in optimized methods creating a great potential for rapid detection and quantification. This work demonstrates the potential and possibilities of CE as a versatile bioprocess monitoring tool. As a part of this study a commercial CE device was modified for use as an online analysis tool for automated monitoring. The work describes three offline CE analysis methods for the determination of carboxylic, phenolic and amino acids that are present in bioprocesses, and an online CE analysis method for the monitoring of carboxylic acid production during bioprocesses. The detection methods were indirect and direct UV, and laser-induced frescence. The results of this work can be used for the optimization of bioprocess conditions, for the development of more robust and tolerant microorganisms, and to study the dynamics of bioprocesses.

Starch analysis as a method to discover subsistence strategies in prehistoric Finland and Estonia

Ancient starch analysis is a microbotanical method in which starch granules are extracted from archaeological residues and the botanical source is identified. The method is an important addition to established palaeoethnobotanical research, as it can reveal ancient microremains of starchy staples such as cereal grains and seeds. In addition, starch analysis can detect starch originating from underground storage organs, which are rarely discovered using other methods. Because starch is tolerant of acidic soils, unlike most organic matter, starch analysis can be successful in northern boreal regions. Starch analysis has potential in the study of cultivation, plant domestication, wild plant usage and tool function, as well as in locating activity areas at sites and discovering human impact on the environment. The aim of this study was to experiment with the starch analysis method in Finnish and Estonian archaeology by building a starch reference collection from cultivated and native plant species, by developing sampling, measuring and analysis protocols, by extracting starch residues from archaeological artefacts and soils, and by identifying their origin. The purpose of this experiment was to evaluate the suitability of the method for the study of subsistence strategies in prehistoric Finland and Estonia. A total of 64 archaeological samples were analysed from four Late Neolithic sites in Finland and Estonia, with radiocarbon dates ranging between 2904 calBC and 1770 calBC. The samples yielded starch granules, which were compared with the starch reference collection and descriptions in the literature. Cereal-type starch was identified from the Finnish Kiukainen culture site and from the Estonian Corded Ware site. The samples from the Finnish Corded Ware site yielded underground storage organ starch, which may be the first evidence of the use of rhizomes as food in Finland. No cereal-type starch was observed. Although the sample sets were limited, the experiment confirmed that starch granules have been preserved well in the archaeological material of Finland and Estonia, and that differences between subsistence patterns, as well as evidence of cultivation and wild plant gathering, can be discovered using starch analysis. By collecting large sample sets and addressing the three most important issues – preventing contamination, collecting adequate references and understanding taphonomic processes – starch analysis can substantially contribute to research on ancient subsistence in Finland and Estonia.

Ohjelmistoyritysten liiketoimintamallit Kaakkois-Suomessa

Tutkielman tavoitteena on tunnistaa Kaakkois-Suomen alueella olevat ohjelmistoyritysten tyypilliset yritysryhmät ja kuvata niiden toimintaa. Tunnistamalla alueen ohjelmistoyrityksille ominaiset piirteet työ antaa myös pohjaa tulevien kehityskohteiden löytämisessä ja kehitystoimenpiteiden kohdistamisessa useisiin samantyyppisiin yrityksiin. Työn taustaksi esitellään ohjelmistoalaa ja ohjelmistoliiketoiminnan malleja, joiden pohjalta muodostetaan viitekehys alueen ohjelmistoyritysten empiiriseen tarkasteluun. Empiriaosuudessa tarkastellaan työn teoreettisessa osiossa esitettyjen liiketoimintamallien toteutumista Kaakkois-Suomessa ja ryhmitellään alueen ohjelmistoyritykset erottelevimpien tekijöiden avulla. Tutkimus on luonteeltaan kvantitatiivinen kokonaistutkimus Kaakkois-Suomen ohjelmistoyrityksistä, ja tutkimusotteeltaan deskriptiivinen eli kuvaileva. Tutkimusaineisto perustui tutkimusryhmän suorittamaan strukturoituun haastatteluun, jossa haastateltiin kaikkiaan 58 ohjelmistoyrityksen vastuuhenkilöitä. Tutkimustulosten perusteella alueelta pystyttiin tunnistamaan neljä toimintatavoiltaan erilaista ohjelmistoliiketoiminnan perustyyppiä: asiakaslähtöiset toimijat (26 toimipaikkaa), räätälöijät (14 toimipaikkaa), integroijat (10 toimipaikkaa) ja tuotteistajat (8 toimipaikkaa). Tulokset osoittavat, että perinteisten ohjelmistoalan liiketoimintamallien kuvaukset ja niistä tehtävät yleistykset antavat hyvän lähtökohdan ohjelmistoyritysten tarkasteluun. Kuitenkin perinteisten ohjelmistoalan liiketoimintamallien antama näkökulma on liian rajoittunut,jos halutaan tarkastella syvällisemmin ohjelmistoyritysten liiketoimintalogiikkaa.

Data analysis tools and methods for DNA microarray and high-throughput sequencing data

The recent rapid development of biotechnological approaches has enabled the production of large whole genome level biological data sets. In order to handle thesedata sets, reliable and efficient automated tools and methods for data processingand result interpretation are required. Bioinformatics, as the field of studying andprocessing biological data, tries to answer this need by combining methods and approaches across computer science, statistics, mathematics and engineering to studyand process biological data. The need is also increasing for tools that can be used by the biological researchers themselves who may not have a strong statistical or computational background, which requires creating tools and pipelines with intuitive user interfaces, robust analysis workflows and strong emphasis on result reportingand visualization. Within this thesis, several data analysis tools and methods have been developed for analyzing high-throughput biological data sets. These approaches, coveringseveral aspects of high-throughput data analysis, are specifically aimed for gene expression and genotyping data although in principle they are suitable for analyzing other data types as well. Coherent handling of the data across the various data analysis steps is highly important in order to ensure robust and reliable results. Thus,robust data analysis workflows are also described, putting the developed tools andmethods into a wider context. The choice of the correct analysis method may also depend on the properties of the specific data setandthereforeguidelinesforchoosing an optimal method are given. The data analysis tools, methods and workflows developed within this thesis have been applied to several research studies, of which two representative examplesare included in the thesis. The first study focuses on spermatogenesis in murinetestis and the second one examines cell lineage specification in mouse embryonicstem cells.

How Cloud Services may Enable SMEs to Overcome International Growth Challenges: Finnish SMEs in the IT Industry

Digitalization and technology megatrends such as Cloud services have provided SMEs with a suitable atmosphere and conditions to internationalize and seek for further business growth. There is a limited amount of research on Cloud services from the business perspective and the limitations and challenges SMEs encounter when pursuing international business growth. Thus, the main research question of this study was how Cloud services may enable Finnish SMEs to overcome international growth challenges. The research question was further divided into three sub-questions dealing with matters related to features and characteristics of Cloud services, limitations and challenges Finnish SMEs experience when pursuing international growth of business, and benefits and advantages of utilizing Cloud services to mitigate and suppress international growth challenges. First, the theoretical framework of this study was constructed based on the existing literature on Cloud services, SMEs, and international growth challenges. After this, qualitative research approach and methodology were applied for this study. The data was collected through six semi-structured expert interviews in person with representatives of IBM, Exidio, Big Data Solutions, and Comptel. After analyzing the collected data by applying thematic analysis method, the results were compared with the existing theory and the original framework was modified and complemented accordingly. Resource scarcity, customer base expansion and retention, and lack of courage to try new things and take risks turned out to be major international growth challenges of Finnish SMEs. Due to a number of benefits and advantages of utilizing Cloud services including service automation, consumption-based pricing model, lack of capital expenditures (capex) and huge upfront investments, lightened organization structure, cost savings, speed, accessibility, scalability, agility, geographical expansion potential, global reaching and covering, credibility, partners, enhanced CRM, freedom, and flexibility, it can be concluded that Cloud services can help directly and indirectly Finnish SMEs to mitigate and overcome international growth challenges and enable further business growth.

Valmentamisen hyödyntäminen työntekijöiden motivoinnissa

Tutkimuksen tavoitteena on tutkia voidaanko työntekijöitä motivoida valmentamisen avulla sekä löytää keinoja ja uusia työkaluja kohdeorganisaation työntekijöiden valmentamisen kehittämiseen. Tutkimuskysymys on ”Kuinka työmotivaatioon voidaan vaikuttaa henkilökohtaisen valmentamisen avulla?”. Tämä tapaustutkimus toteutettiin finanssialan yritykselle laadullisena tutkimuksena ja aineisto kerättiin haastattelemalla puolistrukturoidusti neljää kohdeorganisaation työntekijää. Aineisto analysoitiin sisällönanalyysimenetelmää hyödyntäen. Tutkimustulosten mukaan valmentamisen avulla pystytään vaikuttamaan henkilöstön työmotivaatioon, kun työntekijä on itse siihen asenteiltaan sekä mieleltään vastaanottavainen. Motivaatio jakautuu sisäiseen ja ulkoiseen motivaatioon, joista sisäiseen motivaatioon pystytään vaikuttamaan esimerkiksi mielenkiintoisen työn voimin ja ulkoiseen esimerkiksi palkkauksen avulla. Asiantuntijaorganisaation henkilöstön motivaatiolla on suora vaikutus organisaation suorituskykyyn sekä työyhteisön ilmapiiriin. Tulevaisuudessa kohdeorganisaation tulee panostaa erityisesti yksilölliseen valmentamiseen sekä palautemyönteiseen työilmapiiriin. Uudeksi motivointikeinoksi kohdeorganisaatiolle ehdotetaan ryhmävalmennusta, joka tukee palautteenantamisen kulttuuria sekä motivoi ja sparraa työyhteisöä

Confronting a victim of intimate partner violence in nursing care : a literature review

Intimate partner violence is a growing problem in health care. The purpose of this thesis was to find ways of confronting a victim of intimate partner violence in nursing care and methods how nurses can encourage the victim to disclose the abuse. The aim of this thesis was to help the health care professionals to understand the issue and the need of the victims better, and that way provide a better care. This thesis is a literature review of previously made research articles about intimate partner violence. The research material consisted of 10 published articles, which were collected from different databases. The articles were published within 10 years. A content analysis method was used to examine the articles by making descriptive summary tables according to each questions. The results of this study showed multiple factors which the health care providers should take into consideration when caring the patients. Asking with a non-judgemental attitude, in a safe, confidential setting without the partner present and prioritizing the abuse was mentioned to be important for the victims. Routinely screening and different kind of brochures was considered as good methods to encourage the victims to disclose the abuse. The need for better training and counselling of the health care providers was also discovered. The results of this thesis, did answer to the chosen study questions and that way the purpose of the thesis was filled. Hopefully, in the future this problem can be minimized and prevented in advanced. Further studies are needed to examine whether these caring methods are actually being used in clinical settings and do they have any effect.

Kehityspolkuanalyysi tilastollisena menetelmänä : soveltajan näkökulma

Summary: An applied viewpoint to the trajectory analysis method