Towards adoption of eLearning technologies at Lappeenranta University of Technology: Understanding Teachers‟ Adoption of Blackboard Learning System

The electronic learning has become crucial in higher education with increased usage of learning management systems as a key source of integration on distance learning. The objective of this study is to understand how university teachers are influenced to use and adopt web-based learning management systems. Blackboard, as one of the systems used internationally by various universities is applied as a case. Semi-structured interviews were made with professors and lecturers who are using Blackboard at Lappeenranta University of Technology. The data collected were categorized under constructs adapted from Unified Theory of Acceptance and Use of Technology (UTAUT) and interpretation and discussion were based on reviewed literature. The findings suggest that adoption of learning management systems by LUT teachers is highly influenced by perceived usefulness, facilitating conditions and gained experience. The findings also suggest that easiness of using the system and social influence appear as medium influence of adoption for teachers at LUT.

The Role and Measurement of Social Capital in New Technology-Based Start-up Context

Tämän Pro gradu-tutkielman tavoitteena olirakentaa esiymmärrys sosiaalisen pääoman roolista ja mittaamisesta uuden teknologian start-up yrityksissä. Pääasiallisena tarkoituksena tässä tutkimuksessa olilöytää sosiaalisen pääoman ja start-up yrityksen tuloksellisuuden välille yhdistävä tekijä. Tutkimuksen empiirinen aineisto kerättiin pääasiallisesti kuuden OKO Venture Capitalin sijoitusportfolioon sisältyvien case-yritysten kvalitatiivisten teemahaastatteluiden sekä kvantitatiivisten kyselylomakkeiden avulla. Kvalitatiivisten haastatteluiden tulosten perusteella sosiaalisen pääoman ja tuloksellisuuden välille löytyi yhdistävä tekijä, jota käytettiin myöhemmin hyväksi kvantitatiivisessa kyselylomakkeessa. Tämän tutkielman tulokset osoittivat, että startegisen päätöksenteon kautta sosiaalinen pääoma vaikuttaa osittain start-up yritysten tuloksellisuuteen. Manageriaalisesti tärkempi löydös tässä tutkimuksessa oli kuitenkin se, että sosiaalista pääomaa voidaan käyttää hyväksi ennustettaessa uuden teknologian start-up yritysten tulevaisuuden kassavirtoja.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

Coping with Technology: A Study on Economic Methodology and Strategic Management of Technology

There is a broad consensus among economists that technologicalchange has been a major contributor to the productivity growth and, hence, to the growth of the material welfare in western industrialized countries at least over the last century. Paradoxically, this issue has not been the focal point of theoretical economics. At the same time, we have witnessed the rise of the importance of technological issues at the strategic management level of business firms. Interestingly, the research has not accurately responded to this challenge either. The tension between the overwhelming empirical evidence of the importance of technology and its relative omission in the research offers a challenging target for a methodological endeavor. This study deals with the question of how different theories cope with technology and explain technological change. The focusis at the firm level and the analysis concentrates on metatheoretical issues, except for the last two chapters, which examine the problems of strategic management of technology. Here the aim is to build a new evolutionary-based theoreticalframework to analyze innovation processes at the firm level. The study consistsof ten chapters. Chapter 1 poses the research problem and contrasts the two basic approaches, neoclassical and evolutionary, to be analyzed. Chapter 2 introduces the methodological framework which is based on the methodology of isolation. Methodological and ontoogical commitments of the rival approaches are revealed and basic questions concerning their ways of theorizing are elaborated. Chapters 3-6 deal with the so-called substantive isolative criteria. The aim is to examine how different approaches cope with such critical issues as inherent uncertainty and complexity of innovative activities (cognitive isolations, chapter 3), theboundedness of rationality of innovating agents (behavioral isolations, chapter4), the multidimensional nature of technology (chapter 5), and governance costsrelated to technology (chapter 6). Chapters 7 and 8 put all these things together and look at the explanatory structures used by the neoclassical and evolutionary approaches in the light of substantive isolations. The last two cpahters of the study utilize the methodological framework and tools to appraise different economics-based candidates in the context of strategic management of technology. The aim is to analyze how different approaches answer the fundamental question: How can firms gain competitive advantages through innovations and how can the rents appropriated from successful innovations be sustained? The last chapter introduces a new evolutionary-based technology management framework. Also the largely omitted issues of entrepreneurship are examined.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

Evaluation and realisation of a market entry method: The entry of a small high technology company into the British construction software markets

Tutkielman tavoitteena on tutkia, mikä olisi parhaiten case-yritykselle sopiva menetelmä tulla tekemään kauppaa ulkomaan markkinoille. Kaikki yleiset kansainvälisille markkinoilletulomenetelmät esitetään ja niiden edut ja haitat tuodaan esille. Selvittäessä tehtävänantajayrityksen resurssit, odotukset ja vaatimukset todetaan, että yhteistyössä tehtävä markkinoilletulo on pätevin vaihtoehto. Tämän jälkeen valitaan parhaiten tarkoitukseen sopiva yritys ennalta valitusta yritysvaihtoehtojen ryhmästä ja testataan tämän yrityksen yhteistyösopivuus case-yrityksen kanssa. Yritysten välinen yhteistyösopivuus arvioidaan analysoimalla yritykset haastattelujen avulla ja tutkielmassa esitettyjen teorioiden avulla. Sopivuus todetaan hyväksi, kattaen 71 prosenttia analysoiduista kohdista. Kaksikymmentäyhdeksän prosenttia kohdista todetaan kohdiksi, joissa yritysten välinen yhteisymmärrys ei ole toimeksiantajayrityksen minimivaatimukset täyttävää. Näitä kohtia tullaan käyttämään suunnittelun pohjana kun suunnitellaan jatkoneuvotteluja yhteistyön käynnistämiseksi.

Fabrication technology and applications of fiber Bragg gratings

In this thesis theoretical and technological aspects of fiber Bragg gratings (FBG) are considered. The fabrication of uniform and chirped fiber Bragg gratings using phase mask technique has been exploited throughout this study. Different requires of FBG inscription were considered and implemented experimentally to find economical and effective procedure. The hydrogen loading was used as a method for enhancement the photosensitivity of the fiber. The minimum loading time for uniform and chirped fiber Bragg gratings was determined as 3 days and 7 days at T = 50°C and hydrogen pressure 140 bar, respectively. The post-inscription annealing was considered to avoid excess losses induced by the hydrogen. The wavelength evolution during annealing was measured. The strain and temperature sensor application of FBG was considered. The wavelength shifts caused by tension and temperature were studied for both uniform and chirp fiber Bragg gratings.

Reconstruction and analysis of surface variation using photometric stereo

In many industrial applications, accurate and fast surface reconstruction is essential for quality control. Variation in surface finishing parameters, such as surface roughness, can reflect defects in a manufacturing process, non-optimal product operational efficiency, and reduced life expectancy of the product. This thesis considers reconstruction and analysis of high-frequency variation, that is roughness, on planar surfaces. Standard roughness measures in industry are calculated from surface topography. A fast and non-contact method to obtain surface topography is to apply photometric stereo in the estimation of surface gradients and to reconstruct the surface by integrating the gradient fields. Alternatively, visual methods, such as statistical measures, fractal dimension and distance transforms, can be used to characterize surface roughness directly from gray-scale images. In this thesis, the accuracy of distance transforms, statistical measures, and fractal dimension are evaluated in the estimation of surface roughness from gray-scale images and topographies. The results are contrasted to standard industry roughness measures. In distance transforms, the key idea is that distance values calculated along a highly varying surface are greater than distances calculated along a smoother surface. Statistical measures and fractal dimension are common surface roughness measures. In the experiments, skewness and variance of brightness distribution, fractal dimension, and distance transforms exhibited strong linear correlations to standard industry roughness measures. One of the key strengths of photometric stereo method is the acquisition of higher frequency variation of surfaces. In this thesis, the reconstruction of planar high-frequency varying surfaces is studied in the presence of imaging noise and blur. Two Wiener filterbased methods are proposed of which one is optimal in the sense of surface power spectral density given the spectral properties of the imaging noise and blur. Experiments show that the proposed methods preserve the inherent high-frequency variation in the reconstructed surfaces, whereas traditional reconstruction methods typically handle incorrect measurements by smoothing, which dampens the high-frequency variation.

Acceptance and Use of Information Technology among Nurses in Psychiatric Hospitals

Hoitajien informaatioteknologian hyväksyntä ja käyttö psykiatrisissa sairaaloissa Informaatioteknologian (IT) käyttö ei ole ollut kovin merkittävässä roolissa psykiatrisessa hoitotyössä, vaikka IT sovellusten on todettu vaikuttaneen radikaalisti terveydenhuollon palveluihin ja hoitohenkilökunnan työprosesseihin viime vuosina. Tämän tutkimuksen tavoitteena on kuvata psykiatrisessa hoitotyössä toimivan hoitohenkilökunnan informaatioteknologian hyväksyntää ja käyttöä ja luoda suositus, jonka avulla on mahdollista tukea näitä asioita psykiatrisissa sairaaloissa. Tutkimus koostuu viidestä osatutkimuksesta, joissa on hyödynnetty sekä tilastollisia että laadullisia tutkimusmetodeja. Tutkimusaineistot on kerätty yhdeksän akuuttipsykiatrian osaston hoitohenkilökunnan keskuudessa vuosien 2003-2006 aikana. Technology Acceptance Model (TAM) –teoriaa on hyödynnetty jäsentämään tutkimusprosessia sekä syventämään ymmärrystä saaduista tutkimustuloksista. Tutkimus osoitti kahdeksan keskeistä tekijää, jotka saattavat tukea psykiatrisessa sairaalassa toimivien hoitajien tietoteknologiasovellusten hyväksyntää ja hyödyntämistä, kun nämä tekijät otetaan huomioon uusia sovelluksia käyttöönotettaessa. Tekijät jakautuivat kahteen ryhmään; ulkoiset tekijät (resurssien suuntaaminen, yhteistyö, tietokonetaidot, IT koulutus, sovelluksen käyttöön liittyvä harjoittelu, potilas-hoitaja suhde), sekä käytön helppous ja sovelluksen käytettävyys (käytön ohjeistus, käytettävyyden varmistaminen). TAM teoria todettiin käyttökelpoiseksi tulosten tulkinnassa. Kehitetty suositus sisältää ne toimenpiteet, joiden avulla on mahdollista tukea sekä organisaation johdon että hoitohenkilökunnan sitoutumista ja tätä kautta varmistaa uuden sovelluksen hyväksyntä ja käyttö hoitotyössä. Suositusta on mahdollista hyödyntää käytännössä kun uusia tietojärjestelmiä implementoidaan käyttöön psykiatrisissa sairaaloissa.

Expectations and Experiences of International Students in Information Technology Department

Education in Finland plays a significant role. International students are becoming an essential part of Finnish Educational system. The study was meant to examine their expectations and experiences in a Finnish University. As a case, Lappeenranta University of Technology (LUT) was chosen and, in particular, Information Technology (IT) Department. The main objectives of the study were to examine students’ satisfaction of their study experiences, their evaluation of the teaching quality of courses and last but not least the cultural impact on those. Data for the study were mainly collected with the help of three Internet surveys from a sample of 50 students – currently studying at LUT or already graduated. Response rate from questionnaire to questionnaire varied, however, still close to average and was considered as good and relevant enough. The study was initially meant as qualitative, however, a number of quantitative data analysis methods were used as well. Most of students’ expectations appear to become true, majority of students are satisfied with their experiences. Results show that teaching quality in LUT is evaluated as ‘good’. Nevertheless, students prefer particular courses to the other ones. In conclusion, it can be said that culture does affect students’ expectations, experiences, perception of the world, however, cultural differences do not cause any serious problems.

Virtual technology and haptic interface solutions for design and control of mobile working machines

Commercially available haptic interfaces are usable for many purposes. However, as generic devices they are not the most suitable for the control of heavy duty mobile working machines like mining machines, container handling equipment and excavators. Alternative mechanical constructions for a haptic controller are presented and analysed. A virtual reality environment (VRE) was built to test the proposed haptic controller mechanisms. Verification of an electric motor emulating a hydraulic pump in the electro-hydraulic system of a mobile working machine is carried out. A real-time simulator using multi-body-dynamics based software with hardware-in-loop (HIL) setup was used for the tests. Recommendations for further development of a haptic controller and emulator electric motor are given.

What are the opportunities and challenges of cloud computing technology in the healthcare information systems

This thesis discusses the opportunities and challenges of the cloud computing technology in healthcare information systems by reviewing the existing literature on cloud computing and healthcare information system and the impact of cloud computing technology to healthcare industry. The review shows that if problems related to security of data are solved then cloud computing will positively transform the healthcare institutions by giving advantage to the healthcare IT infrastructure as well as improving and giving benefit to healthcare services. Therefore, this thesis will explore the opportunities and challenges that are associated with cloud computing in the context of Finland in order to help the healthcare organizations and stakeholders to determine its direction when it decides to adopt cloud technology on their information systems.

ORCiD – Membership and implementation at Chalmers University of Technology

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014