Effects of composite casein and [beta]-lactoglobulin genotypes on renneting properties and composition of bovine milk by assuming an animal model

Selostus: Kaseiinien yhdistelmägenotyyppien ja [beta]-laktoglobuliinin genotyyppien vaikutus maidon juoksettumisominaisuuksiin ja koostumukseen

Effects of Surface Properties and Wood Modification into Direct Printing on Wood

Building industry is a high volume branch which could provide prominent markets for wood based interior decoration solutions. Competition in interior decoration markets requires versatility in appearance. Versatility in wood appearance and added value could be achieved by printing grain patterns of different species or images directly onto wood. The problem when planning wood printing’s implementing into durable applications is basically how to transfer a high quality image or print sustainably onto wood, which is porous, heterogeneous, dimensionally unstable, non-white and rough. Wood preservation or treating, and modification can provide durability against degradation but also effect to the surface properties of wood which will effect on printability. Optimal adhesion is essential into print quality, as too high ink absorbance can cause spreading and too low ink absorbance cause pale prints. Different printing techniques have different requirements on materials and production. The direct printing on wood means, that intermedias are not used. Printing techniques with flexible printing plates or in fact non-impact techniques provide the best basis for wood printing. Inkjet printing of wood with different mechanical or chemical surface treatments, and wood plastic composite material gave good results that encourage further studies of the subject. Sanding the wood surface anti-parallel to the grain gave the best overall printing quality. Spreading parallel to the grain could not be avoided totally, except in cases where wood was treated hydrophobic so adhesion of the ink was not sufficient. Grain pattern of the underlying wood stays clearly visible in the printed images. Further studies should be made to fine tune the methods that already gave good results. Also effects of moisture content of wood, different inks, and long-term exposure to UV-radiation should be tested.

Effects of methylation and hydroxylation of sphingomyelins on their biophysical properties and interactions with cholesterol

Sfingomyeliner är viktiga sphingolipidmolekyler som finns i cellmembranets exoplastiska monolager. Sfingomyeliner är sällsynta i växter och mikroorganismer. Den enigmatiska sfingomelinmolekylen som Thudicum isolerade från hjärnvävnad i slutet på 1800-talet fick sitt namn på basen av det grekiska ordet”sfinx”. Sfingomyeliner återfinns speciallt rikligt i myelinskidorna i nervvävnad, var de sfingomyelinrika membranen bildar ett isolerande lager runt nervcellernas axoner. De polära sfingomyelinerna är viktiga beståndsdelar av ägg, mjölk och kött, och betraktas som viktiga näringsämnen speciellt för spädbarn. Det finns ett flertal sjukdomar uppstår på grund av defekter i sfingomyelinmetabolismen., t.ex. Niemann-Picks sjukdom, som är en obotlig ärftlig metabolisk sjukdom. Nyligen har det rapporterats att sfingomyelin tillsammans med kolesterol och specifika proteiner bildar funtionella domäner, s.k. membranflottar, i cellers membran. Membranflottar anses delta i många viktiga biologiska processer som t.ex. signalöverföring, lipid- och proteinsortering, apoptos, celladhesion, cellmigration och synapsers signalöverföring. Därför är det ytterst viktigt att förstå samverkan mellan sfingomyelin och kolesterol och hur denna samverkan påverkar bildandet membranflottar. I avhandlingen presenteras data från våra studier av sfingomyelin samverkan med kolesterol. För avhandlingen syntetiserade vi unika sfingomyelin molekyler genom att införa metyl- och hydroxylgrupper i olika positioner i sphingomyelinmolekylerna, med målet att lära oss mera om sphingomyelinets membranegenskaper och samverkan med kolesterol. Alla sfingomyelin molekyler som användes i avhandlingsarbetet är biologiskt relevanta. I studierna fann vi att hydroxyl- och amidgrupperna i sfingomyelin är viktiga i vätebindningar mellan sfingomyelinmolekyler samt mellan sfingomyelin och kolesterol. Vi upptäckte ytterligare att substition av metylgrupper i acylkedjan eller i interfasregionen hos sfingomyelinmolekyler signifikant destabiliserade sphingomyelin bilagret och försvagade/upphävde molekylernas samverkan med kolesterol. Hur sfingomyelinbilagrens stabilitet och sfingomyelinen-koleterol samverkan påverkades av hydroxylgrupper var beroende av hydrohygruppens position. Förekomst av en extra hydroxylgrupp i sfingomyelionmolekylens sfingoidbasen ökade stabilitetnen hos sfingomyelinbilagren samt stabiliserade sfingomyelinets samverkan med kolesterol.

Influence of plasma modification on surface properties and offset printability of coated paper

The properties of the paper surface play a crucial role in ensuring suitable quality and runnability in various converting and finishing operations, such as printing. Plasma surface modification makes it possible to modify the surface chemistry of paper without altering the bulk material properties. This also makes it possible to investigate the role of the surface chemistry alone on printability without influencing the porous structure of the pigment-coated paper. Since the porous structure of a pigment coating controls both ink setting and optical properties, surface chemical changes created by a plasma modification have a potential to decouple these two effects and to permit a better optimization of them both. The aim of this work was to understand the effects of plasma surface modification on paper properties, and how it influences printability in the sheet-fed offset process. The objective was to broaden the fundamental understanding of the role of surface chemistry on offset printing. The effects of changing the hydrophilicity/ hydrophobicity and the surface chemical composition by plasma activation and plasma coatings on the properties of coated paper and on ink-paper interactions as well as on sheet-fed offset print quality were investigated. In addition, the durability of the plasma surface modification was studied. Nowadays, a typical sheet-fed offset press also contains units for surface finishing, for example UVvarnishing. The role of the surface chemistry on the UV-varnish absorption into highly permeable and porous pigment-coated paper was also investigated. With plasma activation it was possible to increase the surface energy and hydrophilicity of paper. Both polar and dispersion interactions were found to increase, although the change was greater in the polar interactions due to induced oxygen molecular groups. The results indicated that plasma activation takes place particularly in high molecular weight components such as the dispersion chemicals used to stabilize the pigment and latex particles. Surface composition, such as pigment and binder type, was found to influence the response to the plasma activation. The general trend was that pilot-scale treatment modified the surface chemistry without altering the physical coating structure, whereas excessive laboratory-scale treatment increased the surface roughness and reduced the surface strength, which led to micro-picking in printing. It was shown that pilot-scale plasma activation in combination with appropriate ink oils makes it possible to adjust the ink-setting rate. The ink-setting rate decreased with linseed-oil-based inks, probably due to increased acid-base interactions between the polar groups in the oil and the plasma-treated paper surface. With mineral-oil-based inks, the ink setting accelerated due to plasma activation. Hydrophobic plasma coatings were able to reduce or even prevent the absorption of dampening water into pigmentcoated paper, even when the dampening water was applied under the influence of nip pressure. A uniform hydrophobic plasma coating with sufficient chemical affinity with ink gave an improved print quality in terms of higher print density and lower print mottle. It was also shown that a fluorocarbon plasma coating reduced the free wetting of the UV-varnish into the highly permeable and porous pigment coating. However, when the UV-varnish was applied under the influence of nip pressure, which leads to forced wetting, the role of the surface chemical composition seems to be much less. A decay in surface energy and wettability occurred during the first weeks of storage after plasma activation, after which it leveled off. However, the oxygen/carbon elemental ratio did not decrease as a function of time, indicating that ageing could be caused by a re-orientation of polar groups or by a contamination of the surface. The plasma coatings appeared to be more stable when the hydrophobicity was higher, probably due to fewer interactions with oxygen and water vapor in the air.

On the Properties and Cosmology of Q-balls

The properties and cosmological importance of a class of non-topological solitons, Q-balls, are studied. Aspects of Q-ball solutions and Q-ball cosmology discussed in the literature are reviewed. Q-balls are particularly considered in the Minimal Supersymmetric Standard Model with supersymmetry broken by a hidden sector mechanism mediated by either gravity or gauge interactions. Q-ball profiles, charge-energy relations and evaporation rates for realistic Q-ball profiles are calculated for general polynomial potentials and for the gravity mediated scenario. In all of the cases, the evaporation rates are found to increase with decreasing charge. Q-ball collisions are studied by numerical means in the two supersymmetry breaking scenarios. It is noted that the collision processes can be divided into three types: fusion, charge transfer and elastic scattering. Cross-sections are calculated for the different types of processes in the different scenarios. The formation of Q-balls from the fragmentation of the Aflieck-Dine -condensate is studied by numerical and analytical means. The charge distribution is found to depend strongly on the initial energy-charge ratio of the condensate. The final state is typically noted to consist of Q- and anti-Q-balls in a state of maximum entropy. By studying the relaxation of excited Q-balls the rate at which excess energy can be emitted is calculated in the gravity mediated scenario. The Q-ball is also found to withstand excess energy well without significant charge loss. The possible cosmological consequences of these Q-ball properties are discussed.

Yellow-flowered lucerne : properties and influence on performance and reproduction of ewes

Selostus: Sirppimailanen astutettavien uuhien ruokinnassa

Preparation, properties and applications of wheat gluten edible films

Selostus: Syötävien gluteenikalvojen valmistus, ominaisuudt ja eräät käyttösovellukset

Peat properties and vegetation along different trophic levels on an afforested, fertilised mire

Tiivistelmä: Turpeen ominaisuudet ja kasvillisuus metsitetyn ja lannoitetun avosuon eri trofiatasoilla

Delivery of European Cross-Border Health Care and the Relevance and Effects of EU Regulations and Judicial Processes with Reference to Delivery of Drugs and Blood Donor Information Material.

Valtion rajat ylittävät terveyspalvelut Euroopan unionissa sekä Euroopan unionin säädösten merkitys ja vaikutus erityisesti lääkejakeluun ja verenluovuttajille jaettavaan tiedotusaineistoon Valtion rajat ylittävä terveydenhuolto on suuren kiinnostuksen kohteena Euroopan unionissa. Resurssien hyödyntäminen parhaalla mahdollisella tavalla ja tiedon keskittäminen ovat tarpeen terveydenhuollon kustannusten alati noustessa. Terveydenhuoltopalvelut kuuluvat Euroopan sisämarkkinoiden vapaan liikkuvuuden piiriin. Euroopan unionilla ei ole kuitenkaan toimivaltaa säädellä terveydenhuoltojärjestelmiä, vaan sen mahdollisuudet ovat enimmäkseen kansanterveyden edistämisessä ja suojelussa, myös muilla toimialueilla kuin terveydenhuollossa. Tutkimuksen tavoitteena oli tutkia Euroopan unionin säädösten vaikutusta terveydenhuoltosektoriin, erityisesti valtion rajat ylittäviin terveydenhuoltopalveluihin. Erityiskohteena olivat lääkemääräyksen toimittaminen toisen Euroopan unionin jäsenmaan apteekista, resepti-lääkkeiden maahantuonti omaan henkilökohtaiseen käyttöön, sähköisen lääkemääräyksen käyttö kansallisesti ja mahdollisuudet sen käyttöön eri jäsenmaiden välillä, online-apteekkien soveltuvuus Euroopan unionin sisämarkkinoille sekä verenluovuttajille jaettavan tiedotusaineiston yhtenäistämistarve Euroopan unionin alueella. Tutkimuksen osa-alueiden aineisto koottiin vuosina 1999–2003, jolloin Euroopan unioniin kuului 15 jäsenmaata. Apteekit toimittivat useimmiten myös ei-kansalliset, toisessa Euroopan unionin jäsenmaassa annetut lääkemääräykset. Kaikki jäsenmaat rajoittivat lääkemääräyksen vaativien lääkkeiden maahantuontia. Rajoituksia oli maahantuontimäärissä ja -tavoissa. Lisäksi sairasvakuutuskorvausten saaminen ulkomailla lunastetuista reseptilääkkeistä oli hankalaa. Sähköiset lääkemääräykset olivat käytössä vain kahdessa maassa, mutta useissa maissa suunniteltiin niiden kokeilua. Standardit ja käyttöjärjestelmät olivat erilaisia eri maissa. Euroopan unionin alueelle on perustettu online-apteekkeja, joiden toiminta on kuitenkin vaatimatonta. Verenluovuttajille annettava tiedotusaineisto ei missään maassa täyttänyt veridirektiivin vaatimuksia. Tutkimuksen tulokset osoittivat kansallisten käytäntöjen eroavaisuuksien rajoittavan valtion rajat ylittäviä terveydenhuoltopalveluita. Vaikka Euroopan unionin tavoitteena ei ole yhtenäistää terveydenhuoltojärjestelmiä, on tarpeen arvioida uudelleen unionin ja jäsenmaiden välistä työnjakoa. Kansalliset terveydenhuoltojärjestelmät eivät ole erillään Euroopan sisämarkkinoista, jotka merkittävästi vaikuttavat terveydenhuoltoon.

Electrochemical Characterisation of Filter Media Properties and Their Exploitation in Enhanced Filtration

Streaming potential measurements for the surface charge characterisation of different filter media types and materials were used. The equipment was developed further so that measurements could be taken along the surfaces, and so that tubular membranes could also be measured. The streaming potential proved to be a very useful tool in the charge analysis of both clean and fouled filter media. Adsorption and fouling could be studied, as could flux, as functions of time. A module to determine the membrane potential was also constructed. The results collected from the experiments conducted with these devices were used in the study of the theory of streaming potential as an electrokinetic phenomenon. Several correction factors, which are derived to take into account the surface conductance and the electrokinetic flow in very narrow capillaries, were tested in practice. The surface materials were studied using FTIR and the results compared with those from the streaming potentials. FTIR analysis was also found to be a useful tool in the characterisation of filters, as well as in the fouling studies. Upon examination of the recorded spectra from different depths in a sample it was possible to determine the adsorption sites. The influence of an external electric field on the cross flow microflltration of a binary protein system was investigated using a membrane electroflltration apparatus. The results showed that a significant improvement could be achieved in membrane filtration by using the measured electrochemical properties to help adjust the process conditions.