Applying the principles of life cycle assessment and costing in process modeling to examine profit-making capability

Static process simulation has traditionally been used to model complex processes for various purposes. However, the use of static processsimulators for the preparation of holistic examinations aiming at improving profit-making capability requires a lot of work because the production of results requires the assessment of the applicability of detailed data which may be irrelevant to the objective. The relevant data for the total assessment gets buried byirrelevant data. Furthermore, the models do not include an examination of the maintenance or risk management, and economic examination is often an extra property added to them which can be performed with a spreadsheet program. A process model applicable to holistic economic examinations has been developed in this work. The model is based on the life cycle profit philosophy developed by Hagberg and Henriksson in 1996. The construction of the model has utilized life cycle assessment and life cycle costing methodologies with a view to developing, above all, a model which would be applicable to the economic examinations of complete wholes and which would require the need for information focusing on aspects essential to the objectives. Life cycle assessment and costing differ from each other in terms of the modeling principles, but the features of bothmethodologies can be used in the development of economic process modeling. Methods applicable to the modeling of complex processes can be examined from the viewpoint of life cycle methodologies, because they involve the collection and management of large corpuses of information and the production of information for the needs of decision-makers as well. The results of the study shows that on the basis of the principles of life cycle modeling, a process model can be created which may be used to produce holistic efficiency examinations on the profit-making capability of the production line, with fewer resources thanwith traditional methods. The calculations of the model are based to the maximum extent on the information system of the factory, which means that the accuracyof the results can be improved by developing information systems so that they can provide the best information for this kind of examinations.

Production Control Principles in Printed Wiring Board Fabrication

Työn tavoitteena oli kuvata piirilevyvalmistaja Aspocomp Oy:n Espoon tehtaan tämän hetkinen tuotannonohjausperiaate ja tunnistaa siinä esiintyvät puutteet sekä kehittää vaihtoehtoinen tuotannonohjausperiaate piirilevyvalmistukseen. Vaihtoehtoisen ohjausperiaatteen lähtökohtana oli tuotannonohjauksen sopeuttaminen vaativaan ja jatkuvasti muuttuvaan liiketoimintaympäristöön. Työn teoreettinen osa keskittyi tuotannonohjauksen eri lähestymistapoihin. Kirjallisuuskatsauksessa esitetään eri tuotannonohjausperiaatteiden keskeiset sisällöt, jotka muodostavat rungon toimivalle tuotannonohjauskäytännölle. Työn kokeellinen osa keskittyi Espoon piirilevytehtaan tuotannonohjausperiaatteen selvittämiseen. Espoon piirilevytehtaan nykyisessä tuotannonohjausperiaatteessa havaittujen ongelmakohtien ja liiketoimintaympäristön vaatimusten perusteella kehitettiin vaihtoehtoinen tuotannonohjaustapa. Vaihtoehtoisen tuotannonohjaustavan päämääränä oli läpimenoajan lyhentäminen sekä tuotannon parempi hallittavuus. Vaihtoehtoinen toimintamalli tavoitteiden saavuttamiseksi perustuu pullonkaulateoriaan, jossa keskeisin muutos nykyiseen toimintamalliin oli puolivalmisteiden varastointi toimitusajan lyhentämiseksi sekä tuotantovolyymin heilahdusten vaikutusten vähentämiseksi. Työn kokeellisessa osassa ilmeni, että kysynnän muutokset ja kapasiteetin suunnittelun puute aiheuttivat ongelmia piirilevytehtaan tuotannonohjauksessa.

Hylky- ja vesijärjestelmän vaikutus kartongin tuotepuhtauteen

Kirjallisuusosassa käsitellään paperi- ja kartonkikoneiden eri vesijärjestelmiä, vedenkäytön vähentämistä ja sen vaikutusta prosessiin. Mikrobiologiaa, mikrobien aiheuttamia prosessiongelmia, mikrobien torjuntaa ja simulointia on myös käsitelty kirjallisuusosassa. Kokeellisessa osassa laadittiin Kartonkikone 1:n massa- ja vesijärjestelmän mikrobiologisen puhtauden simulointimalli Balas-prosessisimulointiohjelmalla. Kartongin mikrobiologinen puhtaus määritettiin kokonaispesäkelukuna. Kokeellinen osa sisälsi pilot-mittakaavan suodatinkoeajoja, joissa määritettiin tarvittavat erotusparametrit simulointimallille, selvitettiin Dynasand-hiekkasuodattimen soveltuvuus suihkuvesien puhdistukseen, Dynadisc-kiekkosuodattimen käyttökelpoisuus kiertoveden puhdistukseen kiertovesisuodattimena ja hiekkasuodattimien esisuodattimena sekä UV-reaktorin soveltuvuus suodatettujen vesien desifiointiin. Simulointimallilla tarkasteltiin eri prosessivaihtoehtojen vaikutus kartongin mikrobiologiseen puhtauteen. Suihkuvesien puhdistaminen hiekkasuodattimilla alentaa kokonaispesäkelukua vain vähän. Koneen ajettavuus paranee suihkuputkien roskaryöppyjen ja viiraosan limoittumisen vähenemisen takia. Kiertovesijärjestelmän pelkkä jakaminen hylkyprosessi- ja sakeudensäätövedeksi aiheuttaa kokonaispesäkeluvun kasvun prosessista poistettavien vesien puhdistumisen takia. Kokonaispesäkeluku minimoidaan poistamalla ylimääräinen vesi hylkysaostajan suodoksena. Suodatettua hylkysaostajan suodoksen ja viiraveden seosta käytetään sekä sakeudensäätö- että hylkyprosessivedeksi. Hylkymassalla on dominoiva vaikutus kokonaispesäkelukuun. Suurin vähennys kokonaispesäkeluvussa saadaan estämällä mikrobikasvu hylkymassassa. Tämä voidaan tehdä kuumentamalla hylkymassa 80 °C:n höyryllä. Suodatuskoeajojen perusteella Dynasand-hiekkasuodattimella voidaan puhdistaa pisaralämmönvaihtimelta saatavaa lämmintä suihkuvettä. Esisuodatettua kiertovettä voidaan puhdistaa Dynasand-hiekkasuodattimella viiran johtotelojen suihkuvedeksi. Dynadisc-kiekkosuodatinta voidaan käyttää hiekkasuodattimen esisuodattimena ja kiertovesisuodattimena. UV-säteily poistaa tehokkaasti mikrobeja suodatetuista vesistä.

Strategian toimeenpanokeinot muuttuvissa toimintaympäristöissä

Nykyinen strategia ajattelu perustuu filosofiaan, jossa yrityksen aineeton pääoma muuttuu aineelliseksi tulokseksi organisaatioiden resursseja, kyvykkyyksiä ja osaamista hyödyntämällä. Strategisissa tuloskorteissa oppimisen ja kasvun näkökulma kuvaa, miten ihmiset, teknologia ja organisaatioilmapiiri voivat toimia yhdessä strategian toimeenpanemiseksi. Oppimisen ja kasvun tulosten paraneminen ennakoi parannusta myös sisäisiin prosesseihin, asiakasnäkökulmaan ja taloudelliseen menestykseen. Työn teoriaosuudessa luotiin laaja katsaus eri strategiakoulukuntiin, keskittyen etenkin Mintzbergin konfiguraatio strategiakoulukunnan oppeihin. Tämän pohjalta tehtiin määritys strategia ajattelulle; strategiaprosessille ja strategialle muuttuvissa toimintaympäristöissä. Strategiaprosessin kriittiset alueet, sekä strategialähtöisen organisaation periaatteet huomioon ottaen, tehtiin kirjallisuuskartoitusta strategian toimeenpanokeinoista ja käytännön tutkimus niiden käytön yleisyydestä eri organisaatioissa. Tulosten mukaisesti monet keinot ovat aktiivisessa käytössä, mutta toisaalta on nähtävissä, että erilaiset yrityskulttuurit, organisaatioiden "elämäntilanteet" ja resurssien erilaisuudet tarjoavat erilaiset mahdollisuudet strategian toimeenpanoon ja organisaation osaamisen lisäämiseen. Nopeasti muuttuva toimintaympäristö korostaa joustavaa strategian ja sen toimeenpanon tarvetta. Osaamisen kehittäminen johtaa kasvuun; sen varmistamiseksi on löydettävä omalle organisaatioille sopivat keinot jatkuvaan oppimiseen, muutoskykyisyyden ja sitä kautta kilpailukyvyn saavuttamiseen ja ylläpitämiseen.

First principles modeling of metallic alloys and alloy surfaces

By alloying metals with other materials, one can modify the metal’s characteristics or compose an alloy which has certain desired characteristics that no pure metal has. The field is vast and complex, and phenomena that govern the behaviour of alloys are numerous. Theories cannot penetrate such complexity, and the scope of experiments is also limited. This is why the relatively new field of ab initio computational methods has much to give to this field. With these methods, one can extend the understanding given by theories, predict how some systems might behave, and be able to obtain information that is not there to see in physical experiments. This thesis pursues to contribute to the collective knowledge of this field in the light of two cases. The first part examines the oxidation of Ag/Cu, namely, the adsorption dynamics and oxygen induced segregation of the surface. Our results demonstrate that the presence of Ag on the Cu(100) surface layer strongly inhibits dissociative adsorption. Our results also confirmed that surface reconstruction does happen, as experiments predicted. Our studies indicate that 0.25 ML of oxygen is enough for Ag to diffuse towards the bulk, under the copper oxide layer. The other part elucidates the complex interplay of various energy and entropy contributions to the phase stability of paramagnetic duplex steel alloys. We were able to produce a phase stability map from first principles, and it agrees with experiments rather well. Our results also show that entropy contributions play a very important role on defining the phase stability. This is, to the author’s knowledge, the first ab initio study upon this subject.

Integrating eco-innovation principles into regional strategy and policy: case of Päijät-Häme region, Finland

This study focuses on the integration of eco-innovation principles into strategy and policy at the regional level. The importance of regions as a level for integrating eco-innovative programs and activities served as the point of interest for this study. Eco-innovative activities and technologies are seen as means to meet sustainable development objective of improving regions’ quality of life. This study is conducted to get an in-depth understanding and learning about eco-innovation at regional level, and to know the basic concepts that are important in integrating eco-innovation principles into regional policy. Other specific objectives of this study are to know how eco-innovation are developed and practiced in the regions of the EU, and to analyze the main characteristic features of an eco-innovation model that is specifically developed at Päijät-Häme Region in Finland. Paijät-Häme Region is noted for its successful eco-innovation strategies and programs, hence, taken as casework in this study. Both primary (interviews) and secondary data (publicly available documents) are utilized in this study. The study shows that eco-innovation plays an important role in regional strategy as reviewed based on the experience of other regions in the EU. This is because of its localized nature which makes it easier to facilitate in a regional setting. Since regional authorities and policy-makers are normally focused on solving its localized environmental problems, eco-innovation principles can easily be integrated into regional strategy. The case study highlights Päijät-Häme Region’s eco-innovation strategies and projects which are characterized by strong connection of knowledge-producing institutions. Policy instruments supporting eco-innovation (e.g. environmental technologies) are very much focused on clean technologies, hence, justifying the formation of cleantech clusters and business parks in Päijät-Häme Region. A newly conceptualized SAMPO model of eco-innovation has been developed in Päijät-Häme Region to better capture the region’s characteristics and to eventually replace the current model employed by the Päijät-Häme Regional Authority. The SAMPO model is still under construction, however, review of its principles points to some of its three important spearheads – practice-based innovation, design (eco-design) and clean technology or environmental technology (environment).

Virtual Cellar of the Estonian Literary Museum: the Challenges of the Open Access in the Digital Era

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Att tala om det osägbara : Nicolaus Cusanus cirkulära filosofi i verket De coniecturis med särskild hänsyn till Nelson Pikes tankar om unio mystica

In my dissertation called Speaking of the unsayable: The circular philosophy of Nicholas of Cusa in his work De coniecturis, I presuppose an internal (conceptual) relation between the personal experience of God of Nicholas of Cusa (1401-64) in 1438 and, on the other hand, his philosophy. I hence try to describe the precise character of this relation. Referring to the Norwegian scholars Egil Wyller and Viggo Rossvær, I assume that there is a circularity in Cusanus’ philosophy which appears as self-references (= a sentence refers to itself: A is explained by B and B is explained by A). Wyller finds three phases in the thought of Cusanus (1. De docta ignorantia I-III, 2. De coniecturis I-II, 3. all subsequent works). Rossvær finds it impossible to presuppose certain phases, as the philosophy of Cusanus continuously proceeds and remains open to new ideas. As Cusanus however treats his experience of God far more consciously in his second work De coniecturis than in De docta ignorantia, I find it possible to distinguish between the earlier Cusanus (De docta ignorantia including his earlier works) and the later Cusanus (De coniecturis, about 1444, as well as the following works). Cusanus creates a philosophy of language in outline expressed in De coniecturis, in which he presents two concepts of necessity, i.e. absolute necessity and logical, or reasonable, necessity. These are interrelated in the sense that the mind, or the self, logically affirms the absolute, or unsayable, necessity, which shows itself in the mind and which the mind affirms conjecturally. The endeavour conceptually to understand absolute necessity implies intuitive (or intellectual) contemplation, or vision (investigatio symbolica), in which the four mental unities (the absolute, the intellectual, the rational and the sensuous) work together according to the rules described in De coniecturis. In De coniecturis Cusanus obviously turns from a negative concept of the unsayable to a paradigmatic, which implies that he looks for principles of speaking of the unsayable and presents the idea of a divine language (divinaliter). However, he leaves this idea behind after De coniecturis, although he continues to create new concepts of the unsayable and incomprehensible. The intellectual language of absolute seeing is expressed in the subjunctive, i.e. conditionally. In order to describe the unsayable, Cusanus uses tautologies, the primary one of which is a concept of God, i.e. non aliud est non aliud quam non aliud (the non-other is non-other than the nonother). Wyller considers this the crucial point of the philosophy of Cusanus (De non aliud), described by the latter as the definition of definitions, i.e. the absolute definition. However, this definition is empty regarding its content. It demonstrates that God surpasses the coincidence of opposites (coincidentia oppositorum) and that he is “superunsayable” (superineffabilis), i.e. he is beyond what can be conceived or said. Nothing hence prevents us from speaking of him, provided that he is described as unsayable (= the paradigmatic concept of the unsayable). Here the mode of seeing is decisive. Cusanus in this context (and especially in his later literary production) uses modalities which concern possibility and necessity. His aim is to conduct any willing reader ahead on the way of life (philosophia mentalis). In De coniecturis II he describes the notion of human self-consciousness as the basis of spiritual mutuality in accordance with the humanistic tradition of his time. I mainly oppose the negatively determined concept of Christian mysticism presented by the German philosopher Kurt Flasch and prefer the presentation of Burkhard Mojsisch of the translogical and conjectural use of language in De coniecturis. In particular, I take account of the Scandinavian research, basically that of Johannes Sløk, Birgit H. Helander, Egil Wyller and Viggo Rossvær, who all consider the personal experience of God described by Cusanus a tacit precondition of his philosophy.