National Library of Finland as Service Centre for libraries, archives, museums and other public sector organisations

Kristiina Hormia-Poutasen esitys KOBV-konferenssissa Berliinissä, Saksassa kesäkuussa 2013.

Making the impact on research and society: a case study - open repository and crowdsourcing solutions developed for the Finno-Ugric Digitization Pilot Project at the National Library of Finland

Jussi-Pekka Hakkaraisen esitys 24. Kansainvälisessä tieteen-, teknologian ja lääketieteen historian kongressissa (24th International Congress of History of Science, Technology and Medicine) Manchesterissa 26.7.2013

Effects of feed processing on the apparent ileal digestibility of amino acids in pig diets containing wheat bran or wheat middlings

Selostus: Prosessoinnin vaikutus vehnän sivutuotteita sisältävien rehuseosten aminohappojen ohutsuolisulavuuteen sioilla

Cost allocation of corporate IT-services

Cost allocation is an inescapable problem in nearly every organization and in nearly every facet of accounting. Within large corporations there are several different types of units, like profit-making business units and non-profit service units. In order to evaluate the performance of the business units and to fund the operations of service units, the expenses of service production need to be allocated to the business units benefiting from the services.The objective of this thesis was to find good and fair allocating factors for the costs of corporate wide IT services. In order to reach this objective, the cost allocation process was studied in general and an overview of cost structure was established. All possible cost driver candidates were mapped and their good and bad properties were weighed. The cost allocation problem was handled separately according to organizational division of corporate IT department: infrastructure, administrative systems, sales system and e-business. The emphasis was on two largest cost groups: infrastructure costs and sales system costs. As a result of the study an allocation model is presented. It contains categorization of the costs, selected cost drivers and cost distributions for the current year.

Potential Acquisition Candidates for a Supplier of Wood Processing Machinery

Diplomityön tavoitteena oli sopivimman yritysostokohteen valitseminen useiden kilpailijoiden joukosta puunkäsittelykoneiden toimittajalle. Ensin esiteltiin Suomen metsäteollisuus sekä sen osaamistarpeista noussut metsäklusteri pääosin kohdeyrityksen näkökulmasta. Seuraavaksi annettiin kuva yrityksen tuotteista, kilpailijoista ja asiakkaista. Yritysostoprosessi kuvattiin sekä esille tuotiin yleiset motiivit ja kriittiset menestystekijät. Lisäksi kuvattiin kilpailijoiden ja liiketoimintaympäristön analysointi yrityksen menestyksen edellytyksenä. Puuntyöstökoneiden markkinat segmentoitiin ja analysoitiin vuodesta 1990 aina tähän päivään asti, jotta löydettäisiin kehityskelpoiset osa-alueet eli alueet, joissa yrityksen markkinaosuutta voitaisiin kasvattaa. Kandidaattien ominaisuuksia verrattiin yritysoston motiiveihin. Yritysten tuotteet sekä maantieteellinen sijainti pisteytettiin, jotta sopivimmat yritykset nousisivat esille. Kolme yritystä valittiin syvällisempään tarkasteluun. Yritysten tuotteita, taloudellista asemaa ja globaalia verkostoa vertailtiin keskenään muiden tekijöiden, kuten maailmantalouden ohessa. Taloudellisesti vakaa ja teknisesti monipuolinen yritys kohtasi yritysoston motiivit parhaiten. Kohteen positiivisia puolia olivat sijainti, tuotteet ja palvelut. Lisäksi, yritys sopii ostajan strategiaan sekä auttaa kohtaamaan asiakkaiden nykyiset ja tulevat tarpeet.

Cost Estimation of Engineering Environment Services

Työn tavoitteena oli kehittää tutkittavan insinööriyksikön projektien kustannusestimointiprosessia, siten että yksikön johdolla olisi tulevaisuudessa käytettävänään tarkempaa kustannustietoa. Jotta tämä olisi mahdollista, ensin täytyi selvittää yksikön toimintatavat, projektien kustannusrakenteet sekä kustannusatribuutit. Tämän teki mahdolliseksi projektien kustannushistoriatiedon tutkiminen sekä asiantuntijoiden haastattelu. Työn tuloksena syntyi kohdeyksikön muiden prosessien kanssa yhteensopiva kustannusestimointiprosessi sekä –malli.Kustannusestimointimenetelmän ja –mallin perustana on kustannusatribuutit, jotka määritellään erikseen tutkittavassa ympäristössä. Kustannusatribuutit löydetään historiatietoa tutkimalla, eli analysoimalla jo päättyneitä projekteja, projektien kustannusrakenteita sekä tekijöitä, jotka ovat vaikuttaneet kustannusten syntyyn. Tämän jälkeen kustannusatribuuteille täytyy määritellä painoarvot sekä painoarvojen vaihteluvälit. Estimointimallin tarkuutta voidaan parantaa mallin kalibroinnilla. Olen käyttänyt Goal – Question – Metric (GQM) –menetelmää tutkimuksen kehyksenä.

Very preterm infants in Finland - Use of health care services and economic consequences during the first five years of life

The aim of this thesis was to study the health, the hospitalisations, and the use of communal health care services in very preterm children during the first five years of life. In addition, the effect of very preterm birth and prematurity-related morbidities on the costs of hospitalisations, other health care services and the cost per quality adjusted life years (QALY) were studied. This population-based study included all very preterm children (gestational age (GA) <32 weeks or birth weight<1501g, N=2 064) and full-term controls (GA 37+0−41+6, N=200 609) born in Finland during 2000-2003. The data sources included national register data, costing data from the participating hospitals and parental questionnaires. This study showed that most very preterm infants born in Finland survived without prematurity-related morbidities diagnosed during the first years of life. They required relatively little hospital care after the initial discharge, which accounted for the vast majority of the total four-year hospitalisation costs. However, a minority of children born very preterm later developing morbidities had a long initial length of stay and more re-admissions and outpatient visits during the five-year follow-up period. In particular, the number and costs of non-emergency outpatient visits were considerable in individuals with prematurity-related morbidities. The need and costs of hospitalisations decreased clearly with each follow-up year, even in individuals with morbidities. The health-care related costs during the fifth year of life in children born very preterm without prematurity-related morbidities were close to the costs in infants born healthy at term. The cost per QALY of 19,245 € was at an acceptable level already by four years of age in the very preterm population as a whole. Prematurity-related later morbidities and decreasing GA increased the costs per QALY. As the initial hospital stay accounted for a great majority of the total four-year costs, and the costs of hospitalisation decreased with each follow-up year, the cost per QALY is likely to decrease with age. In conclusion, the majority of costs arising after the initial hospitalisation were associated with morbidities related to prematurity. Therefore offering high-quality neonatal care to prevent later morbidities in very preterm survivors has a long-term impact on the cost per QALY. In addition, this study indicates that when estimating the costs of prematurity after the first year of life, one should calculate not only the hospitalisation costs, but also other costs for social welfare services, primary care, and therapies, as these exceed the hospitalisation costs in very preterm infants during the fifth year of life.

The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia Used As Dental Biomaterial

In dentistry, yttrium partially stabilized zirconia (ZrO2) has become one of the most attractive ceramic materials for prosthetic applications. The aim of this series of studies was to evaluate whether certain treatments used in the manufacturing process, such as sintering time, color shading or heat treatment of zirconia affect the material properties. Another aim was to evaluate the load-bearing capacity and marginal fit of manually copy-milled custom-made versus prefabricated commercially available zirconia implant abutments. Mechanical properties such as flexural strength and surface microhardness were determined for green-stage milled and sintered yttrium partially stabilized zirconia after different sintering time, coloring process and heat treatments. Scanning electron microscope (SEM) was used for analyzing the possible changes in surface structure of zirconia material after reduced sintering time, coloring and heat treatments. Possible phase change from the tetragonal to the monoclinic phase was evaluated by X-ray diffraction analysis (XRD). The load-bearing capacity of different implant abutments was measured and the fit between abutment and implant replica was examined with SEM. The results of these studies showed that the shorter sintering time or the thermocycling did not affect the strength or surface microhardness of zirconia. Coloring of zirconia decreased strength compared to un-colored control zirconia, and some of the colored zirconia specimens also showed a decrease in surface microhardness. Coloring also affected the dimensions of zirconia. Significantly decreased shrinkage was found for colored zirconia specimens during sintering. Heat treatment of zirconia did not seem to affect materials’ mechanical properties but when a thin coating of wash and glaze porcelain was fired on the tensile side of the disc the flexural strength decreased significantly. Furthermore, it was found that thermocycling increased the monoclinic phase on the surface of the zirconia. Color shading or heat treatment did not seem to affect phase transformation but small monoclinic peaks were detected on the surface of the heat treated specimens with a thin coating of wash and glaze porcelain on the opposite side. Custom-made zirconia abutments showed comparable load-bearing capacity to the prefabricated commercially available zirconia abutments. However, the fit of the custom-made abutments was less satisfactory than that of the commercially available abutments. These studies suggest that zirconia is a durable material and other treatments than color shading used in the manufacturing process of zirconia bulk material does not affect the material’s strength. The decrease in strength and dimensional changes after color shading needs to be taken into account when fabricating zirconia substructures for fixed dental prostheses. Manually copy-milled custom-made abutments have acceptable load-bearing capacity but the marginal accuracy has to be evaluated carefully.

Shared Services at National Level - What, Why, For Whom?

Kristiina Hormia-Poutasen esitys UKSG:n (United Kingdom Serials Group) yhteisiä palveluita käsittelevässä konferenssissa 16.11.2011

Focus on Users – The National Digital Library of Finland

Heli Kautosen esitys Digital Humanities 2012 -konferenssissa Hampurissa 20.7.2012

National Library of Finland – Developing National Infrastructures

Kristiina Hormia-Poutasen esitys maailman kansalliskirjastojen johtajien (CDNL) tapaamisessa Helsingissä 13.8.2012.

The National Digital Library of Finland – Public Interface FINNA

Aki Lassilan esitys IFLA-konferenssissa Helsingissä 14.8.2012.

Open Repositories : Our Infrastructure Services for Libraries and Research Institutions

Presentation at the Exhibition of the IFLA WLIC 2012 in Helsinki, Finland